SPECIAL REPAIRS TO BLDG NO T 18 AND T 38 AT CQA A UNDER GE C KIRKEE.

Amount

B/R WORKS

Taking down chowkat with shutters, without taking of the shutters from frame area exceeding 1.50 sqm but not exceeding 4.00 sqm each complete all as specified and as directed.

Taking down chowkat with shutters, without taking of the shutters from frame area not exceeding 1.50 sqm each complete all as specified and as directed.

Aluminium powder coated windows, sliding type (3 track) with frame size 100x35x1.2mm thick and shutter frame size 39.40x17.70x1.2mm thick with two glass shutter and one mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 4mm thick plain float glass and 0.36mm dia apperture 1.4mm stainless steel wire mesh and fittings etc and making good the jambs and painting with existing surface matching complete all as specified and directed by Engr-in-Charge.

Factory made pressed steel frames of size 125 x 60mm for doors with one or more rebates(02 rebates) including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and as directed.

Flush door shutters 35 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides and both face is covered with decorative face veneer with lipping/frame to match complete all as specified and as directed.

Plain Cement Concrete (1:2:4), type B1, using 20mm graded stone aggregate as in copings, bed blocks, hold fasts etc., including necessary steel form work. complete all as specified and directed.

PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, including making good to jambs with cement mortar (1:4) and finished to match with existing surface complete all as specified and directed.

Factory made solid PVC double moulded door shutter, 28 to 30mm thick (stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face supplying and fixing in frame at site as per specification & drawings.

Brass handles, cast type, polished bright of length 150mm long complete all as specified and as directed.

Brass sliding door bolt of 250mm long with sand or diecast brass hasp, staple (bolt type) and fixing bolt with rolled of drawn brass bolts and fixed complete all as specified and as directed.

Brass barrel tower bolts 150mm length, with barrel of extruded section and rolled or cast bolts and fixed complete all as specified and as directed.

Door closer, hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed with Aluminium (extruded section body) complete all as specified and as directed.

Butt hinges,75mm medium weight, cold rolled mild steel, and fixed complete all as specified and as directed.

Aluminium, anodised, barrel tower bolts 150mm of extruded section and fixed complete all as specified and as directed.

Aluminium corded venetian powder coated blinds complete all as specified and as directed.

Virified ceramic tiles 10 mm thick,double charged (square/ rectangular) dark shade, polished area of each tile not exceeding 0.36 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:6) including dismantling existing tiles of any type complete all as specified and as directed.

Virified ceramic tiles 10 mm thick, double charged (square/ rectangular), dark shaded, polished area of each tile not exceeding 0.36 sqm, as in vertical surfaces, skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing coat in CM (1:4) including dismantling existing tiles of any type complete all as specified and as directed.

Machine cut Kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including screed bed of 15mm thick in CM (1:6) and dismantling existing tiles of any type complete all as specified and as directed.

20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 10mm thick backing coat in CM (1:4) and dismantling existing tiles of any type complete all as specified and as directed.

Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding of layer 15 mm thick in CM (1:6) for laying of floor finishes including dismantling existing tiles of any type complete all as specified and as directed.

Glazed ceramic coloured tiles as in vertical surfaces 450 x 350 x 7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match incudingl 10mm back coat in CM (1:4) and dismantling existing tiles of any type complete all as specified and as directed.

Demolition of cement concrete unreinforced of any description and in any position complete all as specified and as directed.

75 mm thick plain cement concrete (1:3:6) type C2 using 40 mm graded stone aggregate as in paving/ plinth protection laid in panels with necessary form work, finished rough surfaces of concrete including provision of construction joints complete all as specified and as directed.

Plain Cement Concrete (1:3:6), type C-2 using 40mm graded stone aggregate as in sub base to floors, 75mm thick complete all as specified and as directed.

Precast cement concrete block masonry with solid blocks exc. 10 cm in width and setting in cement mortar 1:6 type C1 1:3:6 ( using 20 mm graded aggregate) complete including demolition of existing masonry all as specified and as directed.

15mm thick rendering on brick work, stone work or concrete surface in cement mortar CM(1:6) finishing the surfaces even and smooth without using extra cement including taking down the existing plastering complete all as specified and directed.

Rendering 15 mm thick on concrete surfaces or fair faces of brick work in cement mortar (1:4) finishing the surfaces even and smooth without using extra cement mixed with approved water proofing compound complete all as specified and directed. NOTE :- WPC will be measured and paid separately.

Preparation of new plaster surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of oil bound emulsion distemper of approved tint over a coat of primer and over a coat of 1mm thick putty on walls complete all as specified and directed.

Preparation of newly plastered surfaces of walls and applying two coats of cement based paint over a coat of alkali resistant primer all as specified and as directed.

Complete removal of existing treatment of wall surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of oil bound emulsion distemper of approved tint over a coat of primer and over a coat of 1mm thick putty on walls complete all as specified and as directed.

Preparation of new or previously untreated wooden surfaces of any description not other wise described over 10cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Preparation of old painted wooden surfaces of any description exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Preparation of new or previously untreated steel and iron surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

Gypsum reinforced boards 600x600x8-10mm thick for ceiling hot dipped galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white, the frame work shall comprise of main runner made out of 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centres securely fixed to the structural soffits by approved hangers at 1200mm maximum centres. Hangers of GI wire 4mm dia to be fixed by approved rawl plugs, level, adjusters and screws etc, The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall, flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm from adjacent center to form 1200x600mm moulds cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross tee centrally between the 1200mm cross tee. Tee perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacturer instructions and finishing the surface by applying two coats of plastic emulsion paint complete all as specified and as directed.

Supply only integral liquid water proofing compound all as specified and as directed.

Rolled mild steel as in roof trusses (framed), trussed purlins crane gantries rails, wind tie and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces cleats etc.,steel conforming to Fe 410-W (Gde-E- 250) quality-A including dismantling the existing complete all as specifeid and as directed.

Rolled Mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe.290.Gde-E-165 cincluding dismantling the existing complete all as specifeid and as directed.

Plain Cement Concrete as in foundation filling and mass concrete, type D-2, (1:3:6), using 40 mm graded stone aggregate including demolition of old unreinforced concrete complete all as specified and as directed.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling old sheet all as specified and as directed.

Plain, galvanised, mild steel sheeting of 1mm thick, as in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 including dismantling old sheet all as specified and as directed.

Machine pressed rubberrised outdoor paver blocks any shape and size, fixed on and including 100 mm thick PCC type C1 (1:3:6) using 20mm graded stone aggregate, with grey cement and pigments confioming to IS 15658-2006 of 60mm thickness includinmg demolition of old PCC subbase and tiles of any type complete all as specified and as directred.

Stainless steel railing, matt finished, consisting of horizontal pipe of 50mm dia(16 gauge) and 10mm thick toughned design glass fixed in between vertical pipes of 32mm dia (16 gauge) at an interval of 1.2m c/c of height 1 mtr welded and fixed with necessary fittings on existing floor all as specified and directed.

Aluminium louvered ventilators of section size 80mm x 20mm x 1.50mm including 5mm thick frosted glass fixed in half portion and adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc making good the jambs complete all as specified and as directed by Engineer-in-Charge.

Rotational moulded polyethylene water storage tanks, cylindrical vertical with closed top, ISI mark embosed on it hoisted and fixed in position all as specified in SSR Part I, 500 Liters capacity and gun metal gate valve 20 mm dia with iron wheel head, screwed both ends for iron pipe with ball brass valve, high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule including dismantling PVC water tanks from roof slab complete all as specified and as directed.

15mm bore dia galvanised steel tubing medium grade with screwed or socket joints, with all necessary tube fittings concealed in walls or floors complete with clips, wall hooks etc to wall and ceilings or laid in floors including cutting necessary chases in brick/concrete surfaces and making good the disturbed surface complete CM (1:4) including taking up or down steel tubing and connections of 15mm bore dia of pipe complete all as specified and as directed.

20mm bore dia galvanised steel tubing medium grade with screwed or socket joints, with all necessary tube fittings concealed in walls or floors complete with clips, wall hooks etc to wall and ceilings or laid in floors including cutting necessary chases in brick/concrete surfaces and making good the disturbed surface complete CM (1:4) including taking up or down steel tubing and connections of 15mm bore dia of pipe complete all as specified and as directed.

Vitreous china wash down water closet pan fixed in repairs ( pedestal pattern), white fixed in floors including trap, connecting to drain ( or outgoing pipe ) and flush pipe, anti syphonage pipe, flush pipe to pedestal pan with all joints, including PVC flushing cistern low level,10 litre capacity with it’s complete accessories, plastic water closet seat cover, black, closed pattern with flat bottom, mild steel chromium plated or aluminised hinging device including health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS with wall hook, making all necessary connections and fixed in position complete all as specified and as directed.

Vittreous china white wash hand basin flat back of size 550x400mm including CI/MS brackets including cutting for pinning of brackets and waste pipe.32 mm dia bore waste coupling of PTMT ( half or full threaded) (Min Wt 45 gms) CP fancy type 15mm bore pillar tap suitable for WHB fixed in repairs complete all as specified and as directed.

Vitreous china urinals fixed in repairs, bowl type (flat back or corner wall type), complete including providing and fixing, bedding the urinal against the wall in cement mortar (1:2) securing the urinal to flush with and including 60mm long brass screws, pointing around urinal back in cement; supply and fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe fixed in repairs complete all as specified and as directed.

Vitreous china urinal partition white of size 310x700 mm complete all as specified and as directed.

Toilet paper holder all as per Cat No BA-88 of Prayag or equivalent fixed in repairs as on walls all as per manufacturers instructions complete all as specified and as directed.

Towel rail, 450mm long between flanges, all as per Prayag Cat No 199 or techno commercially equivalent makes specified in PS, complete all as specified and as directed.

Bib taps long body cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe all as per Prayag Cat Part No :8308 or techno commercially equivalent makes specified in PS complete fixed in repairs all as specified and as directed.

Stop cock (concealed) cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down, screwed both end for iron pipe or brass ferrule with long shank and cup for 15 mm bore of pipe complete all as per Prayag Cat Part No :8318/8320 or techno commercially equivalent makes specified in PS complete fixed in repairs all as specified and as directed.

PVC connections 15mm dia with brass nut on both ends and washers 450mm long complete fixed in repairs all as specified and as directed.

110 mm dia PVC (SWR) pipe, type 'B' single socketed in any length with rubber ring joints laid in trenches,floor and wall including taking down old unserviceable pipe any description and any type complete all as specified and as directed.

PVC (SWR) pipes, type 'B' single socketed in any length with rubber ring joints laid in trenches or in floors and wall 75mm bore including taking down old unserviceable pipe any description and any type complete all as specified and as directed.

PVC (SWR) bends, type 'B' 110mm dia bore any radius with access door complete fixed in repairs all as specified and as directed.

75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete fixed in repairs all as specified and as directed.

PVC (SWR) bends, type 'B' 75mm dia bore any radius with access door complete fixed in repairs all as specified and as directed.

110mm bore PVC (SWR) type 'B' vent cowl complete fixed in repairs all as specified and as directed.

Providing and injecting chemical emulsion for post constructional Antitermite treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding complete all as specified and as directed.

Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as per manufacturer instructions including dismantling old sheet all as specified and as directed.

Dismantling of timber scantlings 40 sq.cm and over in section in unframed work complete all as specified and as directed.

Rolled mild steel as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates,steel conforming to Fe 410-W (Gde-E- 250) quality-A including dismantling the existing complete all as specifeid and as directed.

1.25mm thick gear operated steel rolling shutters, with chain wheel and hand chain with ball bearing, as specified including top cover, anchoring rod, safety lever locks mild steel with 4 levers, hasp and staple and one shop coat of primer; erected in position as indicated,including taking down old rolling shutters, complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

Brick work with fly ash bricks straight or curved on plan exc. 6 mtr mean radius built in CM (1:6), including demolition complete all as specified and as directed.

20-25 mm thick machine cut Kota stone slab on verticle surfaces as in skirting / dado over and including 10mm thick cement plaster in cement mortar (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Pre polished chequered cement concrete tiles 250 x 250 x 20mm thick, set and jointed with grey cement and no pigment and pointed in neat cement slurry in floors over and including15mm screed in CM (1:6), over and including 75mm thick PCC (1:4:8), type D2, using 40mm graded stone aggregate as in sub base of floors complete all as specified and as directed.

Providing, cement concrete type C1 1:3:6 using 20mm graded aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

PVC (SWR) bends, type 'B' 110mm dia bore any radius complete fixed in repairs all as specified and as directed.

E/M WORKS

Taking down carefully copper/aluminium point wiring (light, socket or power) complete (fittings such as switches, ceiling roses, pendants, regulatos, sockets etc to be measured separately), and making good disturbed surfaces of walls, floors etc to match with existing surfaces complete all as specified and as directed.

Taking down MCB with sheet metal enclosure, main switch, DB etc and making good disturbed surfaces to match with existing surfaces complete all as specified and as directed.

Taking down sub main wiring of any size/capacity complete all as specified and making good disturbed surfaces to match with the existing surfaces complete all as specified and as directed.

Point wiring with 1.5 sq.mm (FRLSH) PVC insulated, single core, unsheathed, multi stranded 1100 volts grade, copper conductor cable drawn through and including casing and caping on ceiling/wall, with and including continuous 1.5 sq.mm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor connected to common earth dolly and including PVC rectangular terminal boxes of suitable size and suitable for mounting switches, sockets etc all as specified and as directed for :- a) One light point controlled by one, one way switch. NOTE: - Quoted rate shall include cutting chases, making good to the disturbed surfaces including plastering and painting to match with the existing surfaces.

b) One ceiling/exhaust fan point controlled by one switch and regulator

c) One 3 pin switch socket outlet, 5 Amp on the same board with other switches.

d) One 3 pin 5 amps switch socket outlet point on independent board.

All as per item Sl. No. 2.007 here in before but wiring with 2.5 sq.mm multistranded cable and earth wire with copper conductor of size 2.5 sq.mm for 15 Amps power point.

Switch Piano flush type, one way 6Amps, all as specified and as directed.

Swich socket combination 5 Amps complete all as specified and as directed.

Switch socket combination 3 pin 16 Amps complete all as specified and as directed.

Modular fan regulator step type 20Watt, 2 module, 230 Volts, 50Hz, ISI marked all as specified and as directed.

Ceiling rose, surface type, two to three terminals, 230 Volts (ISI marked) surface bakelite suitable for batten fitting complete all as specified and as directed.

Precoated CRCA body LED tube light batten fitting suitable for and including 20 Watt 4 feet long tube with polycarbonate diffuser, LED lamp efficacy -110 Lum/W ,THD ≤15% with operating voltage range 100-300V, driver efficency >85%, surge voltage withstand 2.5 KV, power factor ≥0.9, connecting with copper conductor cable with all accessories for fixing on steel trusses / false ceiling including dismantling of old fittings all as specified and as directed.

2' x 2' LED recess mounting type light fitting 36 Watt aesthetically designed, fixed in grid / armstrong type ceiling including suitable LED driver and connecting with copper conductor flexible twisted two core cable to existing/new ceiling rose and including mounting accessories complete all as specified & directed.

LED mirror light 7 Watt all as specified and as directed.

SPN DBs of 8 way for using MCBs / MCB isolators suitable for single pole and neutral, with IP 43 -IK09 conforming to IEC 61439-3 & made of high quality CRCA sheet, integrated door earthing system, reversible door facility, ergonomic design with rounded corners to protect against damages like bending, peeling of paint, preventing rusting, with Insulated busbar with breaking capacity of 10KA, shrouded neutral bar, door earthing, corner safe, wiresets, shrouded neutral bar, earth bar & wire ties, all as per Legrand Cat.No. 507611 or techno commercially equivalent models in Schneider/L&T

MCB 40 Amps, single pole and neutral, "C" curve 10 KA breaking capacity with integrated label holder, sliding bottom clamp, color coded On/Off indication on dolly complete all as specified and directed. Make: - Legrand/ABB/L&T/ Seimens.

MCB 6 to 32 Amps, single pole and neutral, "C" curve 10 KA breaking capacity with integrated label holder, sliding bottom clamp, color coded On/Off indication on dolly complete all as specified and directed. Make: - Legrand/ABB/L&T/ Seimens.

MCB 6 to 32 Amps, single pole, 10 KA breaking capacity with integrated label holder, sliding bottom clamp, color coded On/Off indication on dolly, complete all as specified and directed. Make : - Legrand/ABB/L&T/ Seimens.

Sub main wiring with two runs single core 4 sq.mm PVC insulated unsheathed (FRLSH) cable with stranded copper conductor drawn in casing and capping with accessories of suitable size with and including 4 sq.mm copper green colour earth wire all as specified and directed by Engineer-in-Charge. NOTE :- Three runs of 4 sq.mm & one run of PVC casing and caping with accessories shall be measured as one unit length for payment purpose.

Taking down ceiling fan/wall mounted of any type 1200/1400 mm from its location and kept in safe custody and refix the same after finishing of ceiling work, painting the fan complete with synthetic enamel point by spraying including filling cavities with filler, one coat after cleaning all dust etc

MCB DB 2 way complete all as specified and directed.

MCB changever switch of 40 Amps capacity complete all as specified and as directed.

SPN DBs of 4 way for using MCBs / MCB isolators suitable for single pole and neutral, with IP 43 -IK09 conforming to IEC 61439-3 & made of high quality CRCA sheet, integrated door earthing system, reversible door facility, ergonomic design with rounded corners to protect against damages like bending, peeling of paint, preventing rusting, with Insulated busbar with breaking capacity of 10KA, shrouded neutral bar, door earthing, corner safe, wiresets, shrouded neutral bar, earth bar & wire ties, all as per Legrand Cat.No. SHC-M-4 or techno commercially equivalent models in Schneider/L&T

Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5mtrs below normal ground level connected with galvanised iron/steel earth wire of 4 mm dia by means of bolts, nuts, check nuts and washers made out of galvanised iron or steel all as shown in electrical plate No 3 of SSR Part-I and earth wire protected by galvanized pipe light grade 15mm bore and connected to DB including necessary earthwork and excavation in any type of soil, GI light grade 20mm bore watering pipe with funnel and wire mesh, PCC 1:2:4 type B1 chamber with 40mm thick RCC 1:2:4 type B1 design mix cover slab with 6mm dia MS bars at 100mm c/c both ways with MS Hook 6mm dia MS bars etc including testing on completion all as specified and as directed.

Industrial plug and socket board TP 32 Amps including plug top and MCB "C" curve 10 KA, 32 Amps all as per Legrand Cat No 5078 18 and 4086 58 or techno commercially equivalent models in L&T /ABB, making good the disturbed suface of wall including removing of old ICTP main switch after disconecting the incoming and out going cables complate all as specified and as directed.

LED building security light of 36 Watt, IP 65/66 protection with brackets of suitable size made out of 20mm dia GI tubing 1.5 mtr long complete all as specified and as directed.

JP ENTERPRISES

ANIL CONSTRUCTION CO.

Shri Sant Cosntruction

ShreHari Civil Enginneering and Contractors

greenstone construction

MAHESH DADAJI BACHHAV

M/S JAYCONSTRUCTION CO

DARSHAN ENTERPRISES