SPECIAL REPAIRS TO BUILDING NO NP 15G OF SECTION HOSPITAL INCLUDING UNIT MANDIR MT STORES DUTY JCO AND OTHER DUTY STAFF ROOM BATHING POINT AND SPECIAL REPAIRS TO PATIENT COOK HOUSE DINNING HALL FOR SECTION HOSPITAL AT KALINA MILITARY CAMP UNDER GE N

Amount

Taking down chowkats or frames with shutter (without taking off shutter from frame) exceeding 1.5 sqm but not exceeding 4 sqm each including fittings complete all as specified and as directed by Engineer-in-Charge.

Taking down chowkats or frames with shutter (without taking off shutter from frame) not exceeding 1.5 sqm each including fittings complete all as specified and as directed by Engineer-in-Charge.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles up to a lead of 5km and rubbish out side MD land complete all as specified and as directed by Engineer-in-Charge.

Material and labour for brick work with sub class 'B' bricks, straight or curved on plan exceeding 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

Material and labour for brick work with sub class 'B' bricks, straight or curved on plan, to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and removal of debris outside MD land complete all as specified and as directed by Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engineer-in-Charge.

Dismantling of wall and ceiling board (fibre, pulp, insulation etc) or insulation boards/slabs/blankets of any type & any thickness including cover fillets and removal of rubbish outside of MD land complete all as specified and as directed by Engineer-in-Charge.

Dismantling plain or corrugated steel sheeting, asbestos sheet, any gauge, thickness, including Nainital or similar pattern roof coverings all as specified and as directed

Material and labour for rolled mild steel sections as in roof trusses (framed), trussed, purlins, crane gantries, rails, and fastenings and heavy bracket framing, (beam, tee, angle, channels or flat sections) fixed independently, including distance peices, cleats, notching ,drilling,fitting,riveting and or welding or connecting with bolts,and nuts ( including rivetsor bolts and nuts ) etc omplete conforming to Fe 410 W Gde E- 250, Quality B complete all as specified and as directed by Engineer-in-Charge.

Supply and fix joists, channels,angle or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) framed work confirming to Fe-410- W(Gde E-250) quality B other section with gusset plate, rails, braces etc complete fastening and fixing complete all as specified and as directed.

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick as per approved profile of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or L type or J type or cranked hook bolts or as per manufacture instruction complete all as specified and as directed by Engineer-in-Charge Make: JINDAL / INDALCO / HINDALCO / ASSOCIATED Profiles and Aluminium Ltd / ESSAR colour coated sheets

Supply and fix Pre- painted galvalume aluminum zinc coating GI based PLAIN steel sheet 0.50mm thick as per approved profile of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or L type or J type or cranked hook bolts or as per manufacture instruction complete all as specified and as directed by Engineer-in-Charge Make: JINDAL / INDALCO / HINDALCO / ASSOCIATED Profiles and Aluminium Ltd / ESSAR colour coated sheets

Material and labour for MS framed work such as grills , gratings, etc with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars, framed work of garbage bin, barred iron doors, ladders, framed balusters, walk ways, railings, framework of watertanks and similar work conforming to FE 290 Gde 165 etc. complete all as specified and as directed by Engineer-in-Charge.

Material and labour for non skid coloured ceramic tiles, 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match over and including screed bed of 15mm thick in Cement Mortar (1:4) complete all as specified and as directed by Engineer-in-Charge. Make: H R Johnson / Orient Bell Tiles / Kajaria / Somany Tiles Ltd / Nitco tiles / Swastik Tiles / RAK tiles

Material and labour for glazed coloured ceramic tiles (600mm x 600mm), 7 to 8mm thick, in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match over and including screed bed of 15mm thick in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge. Make: M/s H R Johnson / M/s Kajaria / M/s Somany Tiles Ltd / M/s Orient bell / M/s RAK tiles

Material and labour for light shade, vitrified tiles, 10mm thick (minimum), (square/ rectangular) polished, area of each tiles not exc exceeding 0.36 Sqm (including 600mmx600mm size), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed by Engineer-in-Charge. Make: M/s H R Johnson / M/s Kajaria / M/s Somany Tiles Ltd / M/s Orient bell / M/s RAK tiles

Material and labour for glazed coloured ceramic tiles, 1st quality of size 350 x 250 x 7 mm thick or 450 x 350 x 7mm thick (or nearest size) on vertical surface such as skirting, dado, riser/steps etc, set and jointed in neat cement slurry and pointed in colour cement to match including 10mm thick backing coat in Cement Mortar (1:4) etc complete all as specified and as directed by Engineer-in-Charge Make:M/s H R Johnson/M/s Orient Bell Tiles/M/s Kajaria/M/s Somany Tiles Ltd/M/s Nitco tiles/M/s Swastik Tiles / RAK tiles

Material and labour for 40mm thick Plain Cement Concrete 1:2:4 type B1, using 20mm graded stone aggregate as in sub base of flooring and finished even and smooth without using extra cement etc complete all as specified and as directed by Engineer-in-Charge

Material and labour for post construction Anti-termite Treatment of soil under existing floors using chemical emulsion at the rate of one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for providing Anti-termite Treatment Treating along with internal perimeter wall masonry using chemical emulsion at the rate of 2.25 litre per linear metre including drilling and plugging holes etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for providing Anti-termite Treatment Treating along with external wall below concrete or masonry apron using chemical emulsion at the rate of 2.25 litre per linear metre including drilling and plugging holes etc in apron complete all as specified and as directed by Engineer-in-Charge.

Material and labour for providing Anti-termite Treatment Treating the top surface of filled earth chemical emulsion at the rate of 5 litre per square metre including drilling and plugging holes etc in apron complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 5mm thick (+/-0.25mm) false ceiling made of solid PVC insulated panels of size 600mm x 600mm, wall thickness of panel 1.5mm on both side, on 8mm EPS panel 1.5mm plain PVC sheet of density 600kg/cbm manufactured by an ISO-9000 certified company, is stuck on both side with adhesive, the panel is inserted in a frame made of anodised aluminium snap grid work for false ceiling complete all as specified and as directed by Engineer-in-Charge. Make: Gypsum board /Arm Strong/Ramco/Bisan

Supply and fix anodised aluminium snap grid frame work for false ceiling conforming to IS 733, IS 737 and IS 1285 including all ceiling cleats, 4mm dia GI wire suspender with necessary main tee 35.00 x 23.50 x 1.50mm , cross tee and wall angle of size 23.50 x 23.50 x 1.5mm with 605 x 605mm grid system including 12mm thick gypsum board with all connected accessories suitably placed in false ceiling grid as per manufacture instruction complete all as specified and as directed by Engineer-in-Charge. Make: Gypsum board /Arm Strong/Ramco/Bisan

Supply and fix 35mm thick factory made plain framed panelled shutter 2nd class hardwood rail and style (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and as directed by Engineer-in-Charge. Make : M/s Goel Brothers, Raipur / M/s Pioneer Timber, Chandigarh / M/s Goyal Industries, New Delhi / M/s Jain Doors pvt Ltd, Haryana / M/s India Wood & Wood Pdts, Mangalore / M/s MP Wood Products, Indore / M/s A1 Teak Products, Indore / M/s Jain Wood industries( Brand : JAYNA)

Supply and fix 35mm thick factory made 2nd class hard sal wood glazed and skelton shutter, open rebated, prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutter as specified in SSR Part-I section 8, clause No 8.24 (b) complete all as specified and as directed by Engineer-in-Charge. Make : M/s Goel Brothers, Raipur / M/s Pioneer Timber, Chandigarh / M/s Goyal Industries, New Delhi / M/s Jain Doors pvt Ltd, Haryana / M/s India Wood & Wood Pvts, Mangalore / M/s MP Wood Products, Indore / M/s A1 Teak Products, Indore / M/s Jain Wood industries( Brand : JAYNA)

Material and labour for preparing new wooden surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in-Charge. Make : Asian paints/ Nerolac paints/Berger paints/ Shalimar paints/ Dulux

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing on Serial Page No 178 of SSR Part II (pertaining to item No 08095) and edges to be painted to match with prelam sheet complete all as specified and as directed by Engr-in-Charge. Make : RAJSHRI / SINTEX / TUFFFLON / M/s Navratan Specialty Chemical LLP – ‘Brand : GIZA’

Supply and fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of M. S. tubes for top & bottom rails. M.S. frame shall be covered with heat molded plain colour PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at site as per specification & drawing on Serial Page No 149 of SSR Part II (pertaining to item No 08080) including necessary aluminium builders hardware for one door to be provided such as 100mm dia butt hinges - 3Nos, tower bolt 200mm dia - 2Nos, handle 200mm long - 2 Nos etc complete all as specified and as directed by Engineer-in-Charge. Make : RAJSHRI / SINTEX / TUFFFLON / M/s Navratan Specialty Chemical LLP – ‘Brand : GIZA’

Supply and fix stainless steel butt hinges, medium weight, 125mm size all as specified and directed. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix aluminium anodised barrel tower bolt of extruded section size 150mm complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix extruded aluminium alloy handles fabricated types, anodised, of size 150 mm long complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET

Supply and fix 15 micron coloured powder coated aluminium sections for sliding (3 Track) or openable windows, ventilators, doors, partitions etc including fabrication of frame & shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc including all accessories such as glazing clips and rubber beadings for fixing glass panes / wire mesh in frame complete all as specified and as directed by Engineer-in-Charge. Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit India Note: (i) Glass panes /wire mesh will be measured & paid separately. (ii) Rubber beading will not be weighed.

Supply and fix 15 micron coloured aluminium anodised grill of design No DG-101 or RG 102, 10 mm thick, cut to required size/shape, and fixed in position with and including aluminium beading and frame complete all as specified and as directed by Engineer-in-Charge. Make: DECOGRILLE of Associated group / Royal Alum grill Pvt Ltd or equivalent make as approved by GE

Supply and fix 4.0mm thick black glass, ordinary quality in square exceeding 0.5 Sqm in each pane, fixed in aluminium windows complete all as specified and as directed by Engineer-in-Charge. Make : Modiguard/Atul/Kohinoor/Swastik/Saint Gobain

Supply and fix 4.0mm thick figured glass, pin headed type ordinary quality fixing with oil putty and glazing clip, in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-Charge. Make : Modiguard/Atul/Kohinoor/Swastik/Saint Gobain

Supply and fix in repairs aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed by Engineer-in-Charge

Supply and fix 5.5mm thick sheet glass, ordinary quality in square not exceeding 0.5 Sqm in each pane, fixed in aluminium windows complete all as specified and as directed by Engineer-in-Charge. Make : Modiguard/Atul/Kohinoor/Swastik/Saint Gobain

Supply and fix 5.5mm thick sheet glass, ordinary quality in square exceeding 0.5 Sqm in each pane, fixed in aluminium windows complete all as specified and as directed by Engineer-in-Charge. Make : Modiguard/Atul/Kohinoor/Swastik/Saint Gobain

Supply and fix GI wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by Engineer-in-charge.

S&F solar control flim 50 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed by eng-in-charge.

Supply and fix in repair aluminium (extruded section) body Door closer, hydraulically regulated, designation No. 1, universal type, of 700 in width suitable for door shutters and of weight not more than 35 kg and fixed complete all as specified and as directed by Engineer-in-Charge. Make- Everlite/ Universal/ Hardwin/ Dyana

Material & labour for providing and fixing stainless steel (grade -304) railing made of hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steeel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fastners, stainless steel bolts etc. of required size, on the top of floor or the side of waist slab with suitable arrangement as specified and directed by eng-in-charge.

Material and labour for Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in deep for foundation, laying pipes etc or for shaft, walls, manholes, pier holes etc not exceeding 10 sqm on plan and not exceed 1.5m in depth and getting out in hard/dense soil complete all as specified and as directed by Engineer-in-Charge

Removing excavated material to a distance exceeding 1.50 Km but not exceeding 5 Km and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed by Engineer-in-Charge

Returning, filling in including spreading, levelling, watering and well ramming in layer not exceeding 25cm in soil complete all as specified and as directed by Engineer-in-Charge.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil complete all as specified and as directed by Engineer-in-Charge.

Material and labour for hardcore of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface all as specified and as directed.

Material and labour for 100mm thick Plain Cement Concrete 1:4:8 type D2, using 40mm graded stone aggregate as in sub base of flooring and finished even and smooth without using extra cement etc complete all as specified and as directed by Engineer-in-Charge

Material and labour for 100mm thick Plain Cement Concrete 1:2:4 type B1, using 20mm graded stone aggregate as in sub base of flooring and finished even and smooth without using extra cement etc complete all as specified and as directed by Engineer-in-Charge

Material and labour for forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ for slab thickness of concrete slab 150mm complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 75mm cement concrete (1:3:6) type C2 using 40mm graded stone aggregate as in plinth protection and finishing the surface even and smooth without using extra cement including joints in plinth protection to be filled with bitumen mastic (1:3) as specified and as directed NOTE: The plinth protection shall be laid in pannes and length of the each panel shall not more than 2.00 mtr all as directed. 6mm joints filled with 85/25 grade bitumen and sand (1:3) shall be provided. no deduction for jionts shall be made while making payment against above them all as specified.

Material and labour for 75mm thick Plain Cement Concrete 1:3:6 type C2, using 20mm graded stone aggregate as in sub base of flooring and finished even and smooth without using extra cement etc complete all as specified and as directed by Engineer-in-Charge

Material and labour for 75mm thick Plain Cement Concrete 1:2:4 type B1, using 20mm graded stone aggregate as in sub base of flooring and finished even and smooth without using extra cement etc complete all as specified and as directed by Engineer-in-Charge

Material and labour for 100mm thick Plain Cement Concrete 1:3:6 type C2, using 20mm graded stone aggregate as in sub base of flooring and finished even and smooth without using extra cement etc complete all as specified and as directed by Engineer-in-Charge

Material and labour for machine pressed precast concrete interlocking paver block lacquer finish of any shape and size confoRUNNING METREing to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment including 25mm thick crushed stone sand cushioning including watering and consolidation below paver block cushioning complete all as specified and as directed by Engineer-in-Charge. Make: Mehtab Tiles/Indore/M/S Ultra Tiles/NITCO/Topaz Tiles/Navya Tiles Jodhpur

Demolition of brick work/stone masonry built in cement mortar including all quoins, arches, pillars, PCC coping etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing of debris outside MD land complete all as specified and as directed by Engineer-in-Charge.

Material and labour for pre-cast cement concrete block masonry 1:3:6, type C1 using 20mm graded stone aggregate, with solid blocks, exceeding 10cm in width and setting in cement mortar 1:6 etc complete all as specified and as directed by Engineer-in-Charge

Taking down cement plaster of any description on brick or stone walls or in concrete surfaces as in drain etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land complete all as specified and as directed by Engineer-in-Charge

Material and labour for rendering 10 mm thick in cement mortar 1:6 on concrete / brick masonry surfaces and finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Material and labour for rendering 15mm thick plaster in cement mortar (1:4) on brick or concrete surfaces and finishing the surfaces even and smooth without using extra cement etc with upto height of building roof including necessary formwork/scaffolding /ladders and safety belt with preautions complete all as specified and as directed by Engineer-in-Charge.

Supply only integral water proofing compound ISI marked complete all as specified and as directed by Engineer-in-Charge. Make : Pidilite Industries Ltd, Taloja /Super Aquacem (India) Ltd /FOSROC/Siko/Dr Fixit

Material and labour for preparation of newly plastered surfaces and applying two coats of oil bound distemper with roller over a coat of alkali resistant wall primer etc complete all as specified and directed by Engineer in Charge. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints

Material and labour for preparation of old plastered surfaces and applying one coats of oil bound distemper with roller etc complete all as specified and directed by Engineer in Charge. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints

Material and labour for complete removal of existing treatment of wall surface and applying two coats of Acrylic weather proof coat 100% exterior grade paint over one coat acrylic primer, upto height of the bldg with safety belts/scaffolding etc complete all as specified and as directed by Engineer-in-Charge. Make : APEX ULTIMA” of Asian Paints/ “WEATHER COAT ALL GUARD” of Berger Paints/"EXCEL TOP GUARD” of Nerolac/ “DULUX WEATHERSHIELD MAX” of ICI India

Material and labour for preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer with all necessary staging, scaffolding etc as required complete all as specified and as directed by Engineer-in-Charge. Make : Asian paints/ Nerolac paints / Berger paints / Shalimar paints / Dulux

Material and labour for complete removal of existing treatment and applying two coats of distemper oil emulsion over a coat of alkali resistant primer on plastered or other surfaces of wall including necessary formwork/scaffolding /ladders and safety belt etc complete all as specified and as directed by Engineer-in-Charge. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints

Material and labour for preparation of wall/celling surfaces and applying 1.5mm thick wall care putty complete to smoothen the underneath surfaces complete all as specified and as directed by Engineer-in-Charge. Make: Asian Paints / Nerolac Paints /Jenson & Nicholson / Shalimar Paints / JK wall care putty

Demolition of stone slabs and tiles of any description or thickness in floors, aprons, vertical surfaces etc., laid, bedded, and pointed in any mortar or complete all as specified and as directed by Engineer-in-Charge.

Material and labour for granite (of any type ) slab, 20mm thick, machine cut, work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platform, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including necessary molding of edges as required at site including grinding and polishing, over and including 15mm thick cement mortar (1:4) complete all as specified and as directed.

Material and labour for 18 to 20mm thick green marble, machine cut, (table rubbed and polished) as in steps, jambs, pillars, window cill, kitchen platform & like, set, bedded and jointed with grey cement slurry & pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cutting, nosing, moulding of edges as required, rubbing and polishing etc, laid over and including screed bed or bedding layer of 20mm thick in cement mortar (1:4) all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs pillar taps cast copper alloy with capstan head, chromium plated, screwed down high pressure, with or without lettered ‘hot’ or ‘cold’ with long screwed shanks and fly nuts, screwed for iron pipes, 15mm bore complete all as specified and directed by Engineer-in-Charge. Make : Jaquar (Essco)/Prayag / Seiko

Supply and fix in repairs fancy type pillar taps fancy type cast copper alloy with capstan head, chromium plated, screwed down high pressure, with or without lettered ‘hot’ or ‘cold’ with long screwed shanks and fly nuts, screwed for iron pipes, 15mm bore complete all as specified and directed by Engineer-in-Charge. Make : Jaquar (Essco)/Prayag / Seiko

Supply and fix in repairs brass chromium plated bottle traps for wash basin with inlet and outlet screwed for pipe or connections including necessary packing cap and fixed 32mm size Make : Jaquar (Essco)/Prayag / Seiko

Supply and fix in repair PVC connection, 15 mm size 600 mm long both end socket fix complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs CI floor trap 100mm with grating including jointing with waste pipe, fixed in cement concrete 1:2:4 type B1, Complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs, UPVC Nahani trap,100 mm dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) etc, complete all as specified and as directed by Engineer-in-Charge. Make : Prince / Supreme / Finolex

Supply and fix in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) with PVC seat cover, chromium plated hinges & nuts including ‘P’ trap / 'S' trap, connection to drain flushing pipe, antisyphonage pipe complete all as specified and as directed. Make : Cera/Hindustan/Parryware/Jaguar/Hindware/Johnson

Supply and fix in repairs PVC valveless, syphonic action type low level flushing cistern 10 ltr capacity white with inlet ball valve, float and handle including brackets, including flush pipe of polyethylene of low or high density or PVC 32mm dia including connection to pipe and fixing of chains and pull or lever complete all as specified and as directed. Make : Slimline/Commander/Hindustan.

Supply and fix in repairs, concealed stop valve, cast copper alloy, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or for unions of 15mm bore complete all as specified and directed by Engineer-in-Charge Make : Jaquar (Essco)/Prayag / Seiko

Supply and fix mild steel tubing medium grade 15mm, galvanized iron with all fittings such as Tees, elbows, sockets, bends, unions, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239 including fixed to wall / ceiling or laid in floor with suitable size GI clamps including taking down existing GI pipe and making good disturbed surfaces as per existing surfaces complete all as specified and as directed by Engineer-in-Charge. Make: Tata / Jindal / Surya Prakash / Zenith

Supply and fix mild steel tubing medium grade 20mm, galvanized iron with all fittings such as Tees, elbows, sockets, bends, unions, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239 including fixed to wall / ceiling or laid in floor with suitable size GI clamps including taking down existing GI pipe and making good disturbed surfaces as per existing surfaces complete all as specified and as directed by Engineer-in-Charge. Make: Tata / Jindal / Surya Prakash / Zenith

Supply and fix mild steel tubing medium grade 25mm, galvanized iron with all fittings such as Tees, elbows, sockets, bends, unions, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239 including fixed to wall / ceiling or laid in floor with suitable size GI clamps including taking down existing GI pipe and making good disturbed surfaces as per existing surfaces complete all as specified and as directed by Engineer-in-Charge. Make: Tata / Jindal / Surya Prakash / Zenith

Supply and fix 32mm dia low density polyethylene pipes (LDPE) of pressure rating @ 6 kgf/ cm2 fixed to wall complete all as specified and as directed by Engineer-in-Charge. Make: Finolex/Prince/Kisan/Supreme/SFMC

Supply and fix in repairs UPVC floor trap 125/110mm with grating including jointing with waste pipe Complete all as specified and as directed by Engineer-in-Charge. Make : Prince / Finolex / Supreme

Dismantling of any dia cast iron / PVC pipe including bends/branch pipe jointed in cement mortar and taking out if required complete all as specified and as directed by Engineer-in-Charge

Supply and fix PVC (SWR), type B, single socketed rain water/soil waste/vent pipes with rubber ring joints, 110mm dia, fixed to walls complete all as specified and as directed by Engineer-in-Charge.. Make: Prince / Supreme / Finolex

Supply and fix PVC (SWR), type B, single socketed rain water/soil waste/vent pipes with rubber ring joints, 75mm dia, fixed to walls complete all as specified and as directed by Engineer-in-Charge.. Make: Prince / Supreme / Finolex

Supply and fix brass chromium plated 125mm Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs 15mm bore bib taps, fancy type, chromium plated, cast copper alloy, with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule all as specified and as directed by Engineer-in-Charge. Make : Jaquar (Essco)/Prayag / Seiko

Supply and fix in repairs vitreous china wash hand basin white flat back size 550 x 400 mm excluding taps, waste chain and plug and porcelain stopper but including CI brackets, cutting for and pinning in ends of brackets or erecting stand excluding 32mm bore discharge pipe with waste coupling of PTMT etc complete all as specified and as directed. Make : M/s Hindustan Sanitary Ware / Parryware / Neyveli Ceramics (Neycer) / CERA / Hindware

Supply and fix in repairs sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever CI brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including necessary fittings such 40mm coupling waste pipe etc complete all as specified and as directed by Engineer-in-Charge. Make : Diamond / Nirali / Neelkant/Parryware/Prayag

Supply and fix tubular towel rail PTMT 20mm dia, 'D' type, 60cm long between flanges fixed to walls with screws complete all as specified and as directed by Engineer-in-Charge.

Dismantling PVC water tank exceeding 1000 ltr but not exceeding 2000 ltr capacity and removing to store all as specified and directed by Engineer-in-Charge.

M&L rotational moulded polyethylene water storage tank (Cylindrical vertical with closed stop), HDPE, triple layered with ISI marked of 1000 ltrs capacity with inlet & outlet connections, tank nipple, bends, sockets etc, hoisted and fixed in position complete all as specified and as directed by Engineer-in-Charge. Make : Sintex/Polycon/infra/Rotex

S&F of 18mm thick rajashri celuka ply of plain colour fixed with screws, solvent cement/adhesive to make kitchen cabinet sides , top and bottom and shelves inside the cainets complete all as per specifications and as directed by eng-in-charge. (make - Rajashri plastiwood)

S&F of 18mm thick rajashri celuka ply of one sides prelam/rigidlam and other side plain white colour to make kitchen cabinet shutter/drawer front shutters complete all as per specifications and as directed by Eng-in-charge. (make - Rajashri plastiwood)

S&F of 12mm thick rajashri celuka ply of plain white coloured fixed with screws,solvent cement/adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete all as per specifications and as directed by eng-in-charge. (make - Rajashri plastiwood)

S&F of 12mm thick rajashri celuka ply of one side prelam/rigidlam and other side plain white colour fixed with screws,solvent cement/adhesive to make kitchen cabinet back covering and pull out drawer base complete all as per specifications and as directed by eng-in-charge. (make - Rajashri plastiwood)

S&F of auto closing hinges openable at 0 degree for kitchen cabinet shutters as per directed.(make-hettich,ebco,prime)

S&F of ball bearing runners 45mm telescopic channel (20 inch) full extension load capacity 50 kgs as per directed.(make-hettich,ebco,prime)

S&F of SS handles of 100mm size for kithchen cabinet shutters, etc. as per directed.(make-hettich,ebco,prime)

S&F of chrome plated stainless steel wire basket (storage basket) pull out type for large utensils size 486 x 500 mm with necessary fixing clips etc. complete in all respect as specified and as directed by eng-in-charge. (make-hettich,ebco,prime)

S&F of chrome plated stainless steel wire basket (cup and saucer basket) pull out type for size 530 x 500 mm with necessary fixing clips etc. complete in all respect as specified and as directed by eng-in-charge. (make-hettich,ebco,prime)

S&F of chrome plated stainless steel wire basket (thali basket) pull out type for size 380 x 500 mm with necessary fixing clips etc. complete in all respect as specified and as directed by eng-in-charge. (make-hettich,ebco,prime)

S&F of chrome plated stainless steel wire basket (cutlery basket) pull out type for size 380 x 500 mm with necessary fixing clips etc. complete in all respect as specified and as directed by eng-in-charge. (make-hettich,ebco,prime)

S&F of chrome plated stainless steel wire basket (grain trolly) pull out type for size 380 x 500 mm with necessary fixing clips etc. complete in all respect as specified and as directed by eng-in-charge. (make-hettich,ebco,prime)

Taking down carefully copper / aluminium point wiring with PVC casing (light, fan, socket or power) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc., removing materials out side MD land in case of Credit and making good disturbed surfaces of walls, floors, etc., all as specified and as directed.

Material and labour for Point wiring for complete with PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor conforming to IS-694, 1.5sqmm (nominal area) drawn through and including concealed regid non metallic PVC conduit 20mm dia (ISI marked) and accessories laid on surface of wall/roof with sunken type pressed steel/welded terminal boxes made out of 1.2mm mild steel sheet, with suitable and required size of modular box, plate with cover for mounting modular switches, sockets, fan regulators incl. making good surface of wall of PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor 1.5sqmm as earth continuity conductor and connecting to common earth dolly for One light / Fan controlled by one, one way switch complete all as specified and as directed by Engineer-in-Charge. Make of Cable-Plaza, Finolex, Havells, Polycab Make of PVC conduit-Anchor, Modi, Pressfit, Precision, Astral, Panasonic Anchor, Polycab, Presto Plast, Supreme

All as per item No.111 here-in before but One 3 pin, 5/6 Amps switch socket combination point on the same board with other switches controlled by one switch.

All as per item No. 111 here-in before but for one 5 pin, 5/6 Amps switch socket combination point on independent board

All as per item No.111 here-in before but with 2.5sqmm multi stranded copper conductor cable with 2.5 Sqmm multi stranded copper conductor for earth continuity conductor connected to common earth dolly connecting up to fittings for fixing modular socket for 3 pin 15/16 Amps switch socket combination on independent board complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Modular type switch, 1 module ,single pole, one way, 6 Amps, flush type, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T / Honeywell

Supply and fix Modular type switch, 1 module, single pole, one way, 16 Amps, flush type, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T / Honeywell

Supply and fix Modular type, 2 module , switch socket outlet combination, 2 in 1, 2/3 Pin, 6/16 Amps, flush type, universal ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T / Honeywell

Supply and fix Modular type 2 module ,switch socket outlet combination, 2 in 1,2/ 3 Pin, 6 Amps, flush type, universal ISI marked complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T / Honeywell

Supply and fix ceiling rose, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed by Engineer-in-Charge. Make: Anchor / Legrand / L&T

Supply and fix Modular hum free type electronic fan regulator rotary step deluxe, 240 volt, 100Hz 2 MODULE all as specified and as directed by Engineer-in-Charge. Make: Anchor / Leader / L&T / Legrand / Honeywell

Supply and fix in repairs double door CRCA steel sheet constructed as pet IS: 8623 ,sheet metal enclosure powder coated MCB DB SPN 8 way with 200 Amps rated bus bar, 240 volt, horizontal type, IP 43-IK 09 protection, flush in walls including making good of disturbed surface to match with existing surface complete all as specified and as directed by Engineer-in-Charge. Make: Schneider / Havells / L&T / ABB / Legrand / Siemens / Benlo/Larsen & Toubro.

Supply and fix in repairs double door CRCA steel sheet constructed as pet IS: 8623 ,sheet metal enclosure powder coated MCB DB SPN 4 way with 200 Amps rated bus bar, 240 volt, horizontal type, IP 43-IK 09 protection, flush in walls including making good of disturbed surface to match with existing surface complete all as specified and as directed by Engineer-in-Charge. Make: Schneider / Havells / L&T / ABB / Legrand / Siemens / Benlo/Larsen & Toubro.

M&L for submain wiring alongwith earth continuity conductor with PVC insulated FRLSH multistranded copper cable (phase-red, neutral-black, earth-green) drawing into and icluding concealed rigid non metallic PVC conduit medium grade, ISI marked 20mm dia. alomg with accessories of nominal size 2x6 sqmm+ 1x6Sqmm earth continuity conductor complete all as specified and as directed by Engineer-in-Charge. make:- Plaza, Finolex, Havells, Polycab

S&F in replacement existing UNSV LED batten (1.2m) made of aluminium housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficiency of 100+ lumens per watt and total power consumption not less than 20 watt incl. driver. it has an rated system life time of 40000 burning hours at L70 and should incl. a colour temperature of 6500k,CRI>80,THD<10% & PF>0.95 complete all as specified and directed eng-in-charge. Make:- phillips cat part no. BNO21C LED20S PSU CW GR S2 or Equivalent of Havells/ Bajaj

S&F LED light fitiings 1x9w/1x10w bulkhead luminars including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make: Bajaj/ havlles/ phillips/

S&F LED 35W streetlight made up of pressure die. Cast housing with prismatic polycarbonte diffuser and individual LED with secondary optics and IP65 protection complete with fixing arrangements and connections as directed. Make:- Havells cat part no ENDURASUNDOWNSL35WLED765PASYBOPC or equivalent of phillips/ Bajaj

S&F in replacement existing UNSV recess/suspended slim LED panel light with powder coated rim 36 wat of size 2x2 feet, high efficiency PMMA diffuser soft glare free light complete with driver with ceiling cut out size 36 watt incl. LED lamps complete incl. connecting electrically to ceiling rose using cord flexible 3core PVC insulated over all seathed with flexible copper conductor of size 0.75 sqmm all as req. and specified and directed by Eng-in-charge. Make:- Make:- phillips/ wipro/ bajaj/ havells

Material and labour for Earthing complete with Galvanised steel earth plate electrode 60 cm x 60 cm x 6.0 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of earth the plate not less than 1.5 metres below normal ground level, connected to and including galvanised earth lead wire 4 mm dia, 7.5m long, by means of bolts, nuts, check nuts and washers made out of galvanised iron or steel with provision of charcoal & common salt packed upto minimum 150 mm all around the earth plate, and protected by 15 mm bore light grade galvanised iron pipe and connected to control board / panel / equipment complete all as shown in electrical plate No.3 of MES schedule Part I with PCC pit in PCC 1:2:4 type B1 using 20 mm graded stone aggregate, MS angle iron frame of size 50mm x 50mm x 5mm, cast iron cover with locking arrangements, GI 20 mm bore medium grade pipe and CI funnel with wire mesh for watering arrangement including necessary excavation and earth work in any type of soil/strata & testing complete all as specified and as directed by Engineer-in-Charge.

Supply and fix MCB SP, 6 Amps to 32 Amps, 240 volts,10 KA complete all as specified and as directed by Engineer-in-Charge. Make : Legrand / L&T / Havells / ABB / Siemens / Schneider//BENTEC

Supply and fix MCB DP, 32 Amps, 240 volts,10 KA complete all as specified and as directed by Engineer-in-Charge. Make : Legrand / L&T / Havells / ABB / Siemens / Schneider//BENTEC

Taking down of old DBs with MCB / fuses of any size and rating complete from the position after disconnecting the electrical connection all as specified and as directed.

Taking down ceiling fan / exhaust fan of any make, type and sweep by disconnecting electric connection and keep in mes store yard. All as per direction .

Hanging only ceiling fan/ exhaust fan and connecting up including provision of cable from ceiling rose or connectedd to fan all as per directed.

Cutting chases with dust free cutting machine, pinning in making good the disturbed RM surface of wall/ceiling and pointing in cement mortar 1:3 to cutting chases for concealed conduit wiring etc. and making good etc of girth not exceeding 10 cm girth all as specified and as directed bt eng-in-charge.

Note: Deduct Credit for demolished / dismantled material of Rs. (-) 92,360.00 (Minus) as listed in Schedule of Credit. Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum'

RAJU ENTERPRISES

Vishal Builders

dimalsonsdecorator