Repair and Renovation of Chowkidar Quarter at Industrial Estate Poonch.

Amount

Earth work in excavation by manual means over areas (Exceeding 30 em and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. on plan) including disposal of excavated earth upto disposal site as directed by incharge engineer. Disposed earth to be levelled and neatly dressed in : All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) Crushed including all carriages complete job

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) Crushed (incl. all carriage complete job)

Providing and laying in position specified grade of reinforced cement concrete for pillars of gate including cost of centering and shuttering but excluding cost of reinforcement in 1:1.5:3 (1 cement: 1.5 coarse sand: 3 crushed stone aggregate 20mm nominal size) incl. all carriage complete job

Brick work with common burnt clay FPS (non modular) bricks of class designation 75 in walls in cement mortar 1:6 (1 cement 6 fine sand) incl. all carriages complete job

15 mm Cement plaster on the rough side of single or half brick wall of mix:1 : 6 ( 1 cement : 6 fine sand) incl. all carriages complete job

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) incl. all carriages complete job

10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35kg per cum of earth and gobri leaping with bhusa at 35kg per cum of earth and gobri leaping with mix 1:1 ( 1 clay: 1 cow dung) and covered with flat tile bricks of class designation 100 grouted with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finishing neat. With Hand moulded F.P.S brick tiles. (incl. all carriages complete job)

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge.(incl. all carriages complete job)

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles above 25 mm and upto 40mm

Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (incl. all carriages complete job)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 60 x 60cm (incl. all carriages complete job)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) Second class deodar wood

Providing and fixing glazed shutters for doors, windows and clerestory windows using 1Okg/sqm (4mm thick) float glass panes including lSI marked M.S. pressed butt hings bright finished of required size with necessary screws. Second class deodar wood

Providing and fixing 35 mm thick wire gauze shutters, using galvanised M.S. wire gauze of average width for aperture 1.4 mm in both directoin with wire of dia. 0.63 mm for doors, windows and clerestory windows with hinges and necessary screws : Second class deodar wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al! complete as per direction of engineer- in charge. Second class deodar wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick Second Class deodar wood.

Providing and applying white cement based putty ofaverage thickness 2mm, of approved brand and manuf, over the plastered wall surface to prepare the surface even and smooth complete

Finishing wall with Delux multi surface paint system for interiors and exteriors using primer as per manuf. specifications: Two or more coats applied @ 1.25 litre 10sqm over and including one Coat of special primer applied @ 0.75 litre/10sqm

Finishing wall with Delux multi surface paint system for interiors and exteriors using primer as per manuf. specifications: Painting wood work with deluxe multisurface paint of required shade. Two or more coats applied @ 0. 90 litre/10sqm over an under coat of primer applied @ 0. 75 litre/10sqm of approved brand and manufacture

Cleaning of Septic Tank Size 8 'x 10'

Providing and fixing Chlorinated Poly vinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings 1/C fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge. (Concealed work including cutting chases and making good the walls etc.)

15mm nominal outer dia pipes.

20mm nominal outer dia pipes.

Providing and fixing Chlorinated Poly vinyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this included jointing of pipe and fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of Engineer-in-charge. (External work)

20mm nominal outer dia pipes.

25mm nominal outer dia pipes.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license] C.P. BRASS FITTINGS

Providing and laying PVC pipes with all fittings including laying in position cement concrete 1:3:6 for fixing PVC pipes complete job

75 mm dia

110 mm dia

Providing and fixing PVC rain water pipes including all fittings complete job 110 mm dia

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) R.C.C. top slab with 1:2:4 mix ( 1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 ( 1cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finsihed with a floating coat of neat cement complete as per standard design inside size 60 x60 cm and 45 cm deep including CI cover with frame complete job

Providing and fixing PVC floor trap complete job

Providing and fixing of following CP fittings complete job (Make Jaquar)

CP bras bib cock

CP brass angle valve

Towel Ring

Soap dish holder

Providing and fixing white vitreous china pedestal type water closet ( European type) with seat and lid , 10 litre low level white vitreous china flushing cistern and CP flush with fittings, C.I./M.S. brackets 40mm bend diameter flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipaldesign complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C. pan with lSI marked white solid plastic seat and lid. with white vitreous china flushing cistern & C. P. flush bend (Make Cera/Hindware)

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x41 Ox265mm sizes respectively. (Make Cera/Hindware)

Providing and fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps (Make Cera/ Hindware)

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. (Make Cera /Hindware)

Providing and fixing uplasticised PVC connection pipe with brass unions 20 mm nominal bore Superior

Providing and fixing of looking mirror of size 450mm x 600mm (Approved by in-charge engineer)

Providing and fixing kitchen sink with C. I. brackets, C.P brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required. Stainless steel fire clay kitchen sink of size 600x450x250 mm

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc complete.

Tower Bolt 6"

Tower Bolt 4"

Providing and fixing ISI marked aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc complete

Door Handle 6"

Door Handle 4"

Providing and fixing of Door Lock make Godrej including with necessary screws etc complete

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required

Supplying and fixing brass batten/ angle holder including connection etc. as required.

Supply, Installation, Testing and Commissioning of ceiling fittings of concealed light 18 watt, complete with all accessories, including connections etc as required (Make: Bajaj/Crompton Greeves/ USHA/Wipro)

Supply, Installation, Testing and Commissioning of 7 watt LED Bulb on the existing angle holder including PVC round sheets (Make: Panasonic/ Havels/Syska/Wipro)

Supplying, installation, testing and commissioning of ceiling fan 1200 rpm including wiring the down rods of standard length (upto 30 cm) with 1.5 sq mm FRLS PVC insulated copper conductor single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc (Make: Havells/ Crompton Greeves/ Usha)

Supplying, installation, testing and commissioning of exhaust fan including making good the damage (300mm shutter type) (Make: Bajaj/ Crompton Greeves/ Usha)

Supplying, installation, testing and commissioning of pre wired flourescent compact flourescent fittings of T5 Batton 18 watt, complete with all accessories and tube/lamp etc directly on ceiling /wall including connections with 1.5 sqmm FRLS PVC insulated copper conductor single core cable and earthing etc as required (Make: Havells/ Jaquar/ Greatwhite/Crompton Greeves/ Wipro/ HPL)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Double pole

Supplying and fixing63 A, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 40 A, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. 6 way (4 + 18), Double door

Supply, Installation, testing of GI earthing Electrode (pipe in strip) of length 2 mtr with outer pipe dia not less that 48mm and strip terminal size (40 x 60) mm and innder strip 25 x 3 mm with 25 kg of ground compound (Make: True power / ISI)

M/S ARFAT CONSTRUCTION CEMENT STORE

M/S RAINA CONSTRUCTIONS