Providing and Erecting Decorative Street light in premises at village Dudhgaon. Tq. Jintur and Dist. Parbhani.

Supplying and erecting cast iron poleol 9M height Single arm Classic Omamental Combo Pole with base made out of S.G.Iren grade 500/7 shaft made of MS Pipe in a Sections (Bottom dia: 139 mm.Middle dia 114. Top dia: 60 mm)and rings made of Cast Iron and base casting made out ol S.G.Iron grade 500/7.painted with Polyurethane paint for UV embellishments of Grade FG-150/220, MS pipes used shall be stabilization.Cast Iron material used for casting of ISI-marked &of B-class as per the IS 1161. Bracket Arm is of bracket shaft pipe of 42mm dia and am made of Cast Iron Am suspended type with arm made of MS pipe as per IS:1161 and Width for the single am is 900 mm Embellishment on bracket arm is made of cast iron heritage type. Each cast piece is shot blasting to remove all its extenal dirt and residues etc. AI CLB MS units are given an extensive treatment with PU based elch primer and paint prescribed for such surfaces to make it pbsolutely rust and corrosion proof, as well as giving it a Bleasing appearance through antique finish with Trishul, Tilak & Hathi. Minimum DFT level is 60 Microns. All the joints and carvings of the pole unit shall be free from any kind of distortion for a pleasing aesthetic look. The pole is structurally designed to sustain desired wind load at location. The Pole unit should be grouted using 3 nos anchor J-bolts of size M-20x600 mm long with PCD 425mm confirming to EN 8 Grade. Total height of the pole along with Bracket is 9000mm.A suitable service window shall be provided in the base of pole to allow access to electrical connections and terminations. Approved Make- Mtr Each BAJAJ 9M SINGLE ARM RNAMENTAL SULTAN POLE NON CSR

Supplying and erecting PVC insulated PVC round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV. DSR I.no. 1.3.14.

Supplying, erecting & marking SPMCB 0.5A to 5A, C-series with rated short -circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB. DSR I.no. 5.3.1.

Supplying, erecting & marking FPMCB 40A to 63A, with rated short-circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB. DSR I.No. 5.3.13

Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame. DSR I.no. 5.4.13.

Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. DSR I.No. 6.1.19 1) CRCA size - 0.5 x 0.5 m = 1.0 /12.55 kg/mtr = 12.55kg., 2) Angle size - 50 x 50 x 6m = 12 tr/4.5 kg = 54 kg - 66.55kg . DSR I.No. 6.1.19

Supplying and erecting bus bar chamber triple pole with neutral with four aluminium bars, 500V, 100A having 15mm (Width) X 3 mm (Thickness), with 99.9 % aluminium purity as per E91E Grade & Current Density 0.8 A per sq. mm. compliance to IS 5082 and Enclosure fabricated with 16 SWG CRCA sheet and epoxy paint, with suitable number of ways and with SMC/DMC Insulators and accessories of suitable rating complete as per specification no. CPBB. DSR I.No. 6.2.1.

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL DSR I.No. 7.1.26

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 25 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL DSR I.No. 7.1.30

Supplying & erecting G.I. pipe ‘A’ class 50 mm dia. erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE. DSR I.no. 7.6.3

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. DSR I.No. 7.6.9.

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 9m & 10m high octagonal /conical GI pole). DSR I.No. 16.3.10

Supplying & erecting cast iron cable indicator plate buried along with route of cable for PVC / XLPE armoured cable as per specification No. CB-CIP. DSR I.No. 7.8.1. 牐癯摩杮攠牡桴湩⁧楷桴朠污慶楮敺⁤物湯攠牡桴瀠慬整猠穩⁥〶砠㘠‰⁸⸰‶浣挠浯汰瑥⁥楷桴愠汬洠瑡牥汩ⱳ琠獥楴杮☠爠捥牯楤杮琠敨爠獥汵獴愠⁳数⁲灳捥晩捩瑡潩潮‮䅅䔭⹐䐠剓䤠丮⹯㤠ㄮㄮ밮牐癯摩湩⁧楰数琠灹⁥慥瑲楨杮眠瑩⁨〴浭‮楤⹡䜠䤮‮楰数漠⁲〲洠楤⹡䜠䤮‮潒⁤潣灭敬整眠瑩⁨污慭整楲污⁳整瑳湩⁧湡⁤敲潣摲湩⁧桴⁥敲畳瑬⁳獡瀠