REPAIRS TO WOODEN JOINERY GRILLS CUB BOARDS FLOORING PLASTERING AND FALSE CEILING ROOF REPAIRING OTHER CONNECTED WORK IN MD AND OTM ACCN FOLLOWERS ACCN AND NCOS MD ACCN AT ZONE C AREA AT NDA KHADAKWASLA

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) n exc. 1.5 sqm each complete all as specified and directed

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but n.exc 4 Sqm each complete all as specified and directed

Taking down Shutters of any description n.exc. 1 Sqm each complete all as specified

Taking down Shutters of any description exc.1 Sqm and n.exc 2 Sqm each complete all as specified

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets andincluding re-fixing in position complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including raking out joints,hacking for key ,scrubbing down with water etc complete

Dismantling floor or wall tiling of any description and size including cement mortar bedding (but not backing), removing rubbish off the premises complete all as directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc including cleaning off premises where complete all as specified and directed.

M&L for second class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed

S&F 35 mm thick factory made plain framed, panelled shutters with 2nd class hard wood rails and panel of 9mm BWP commercial ply 12mm thick veneered particle board with commercial veneers on both faces.The size of rail or style shall be as per IS 1003 Part-I Kiln seasoned and chemically pressure treated complete all as specified and directed

M&L for second class hard wood glazed and skeleton shutter 30mm thick, factory made, open rebated and prepared to receive glass/gauge etc, sash bars, mitred and rebated, with edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc, sizes of stiles, rails etc as specified in section 8, clause 8.24 (b) of SSR part-I(2009) complete all as specified and directed

S&F 35 mm thick second class hardwood factory made glazed and skelton shutters open rebated and prepare to receive glass/ guage (with sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass/guage etc size of member etc size members of shutters as specified in SSR part I Section-8 clauses 8.24(b) supplied and fited to chowkhat complete all as specified and directed

S &F 30 mm thick Flush shutters ,solid core construction , with particle board core and plywood face panels , commercial type on both sides complete all as specified and directed

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supply and fixing in opening as per the specification and drawing complete all as specified and directed

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with hit moulded plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the tiles and rail with suitable PVC sheet bedding and joined together with solvent cement, supplying and fixing in the frame at site as per specificaton & drawing.complete all as specified and directed

S&F in repairs 18/19 mm thick block board of commercial quality Gde-2 fixed with screws as in pelmet boxes etc complete all as specified and directed

S&F in repairs 25 mm thick Block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on both faces fixed with screws as in cup board shutters & shelves etc complete all as specified and directed . Note: The frame work will be measured and paid seperately

S&F contineous (piano) hinges, mild steel bright finish of 40 mm width of flaps(when open) complete all as specified.

S&F second class hard wood plain fillets exc 13 sqcm and not exc 25 sqcm sectional area, square, rectangular or tringular in section, wrought fixed with nails including necessarynecessary treatment with wooden primer and two coats of synthetic enamal paint complete all as specified and directed

M&L for preparation of new wooden surfaces and painting two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

S&F anodised aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F anodised aluminium powder coated door shutter, aluminium section wt 0.55 Kg/m including neccesary joining cleats, glazing clips,rubber neoprene packing, handle 2 nos in each door, hinges, anodised aluminium snap beading screw etc ,complete all as specified and directed

S&F powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. including fixing of 5 mm thick Sheet glass, complete all as specified. Fixing included the making good of the opening, such as plastering jambs, levelling and finishing complete all as specified and directed

S&F aluminium powder coated three track sliding window with mosquito net two track for glass leaf sliding and one track for mesh leaf sliding outer frame weighing 0.699 Kg/m,75x26 mm size equvalent Jindal model 20671, shutter plain of size 37.5x15mm weighing 0.366 Kg/m, Section No 20690 Jindal), with powder coating of min thickness 50 micron with one or more rebates, sliding type without sash bars, 5mm thickness double tampered clear glass , rubber packing, snap beading screws,with horizontal sliding type with stainless steel mesh, frame, powder coated aluminium grill type AL 925 or equvalent grill, cutting in suitable size and fitting with screws and suitable beedings to aluminum window frame complete etc. complete all as specified.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including taking out wooden beads and incl supply & fixed wooden beads in the same position complete all as specified and directed

S&F 100mm butt hinges cold rolled mild steel medium weight and fixed complete all as specified and directed

S&F 100mm Aluminium handles, cast type, anodised complete all as specified and directed

S&F 150mm Aluminium handles, cast type, anodised complete all as specified and directed

S&F 75mm butt hinges cold rolled mild steel medium weight and fixed complete all as specified and directed

S&F Aluminium anodised barrel tower bolts of extruded section 100mm long complete all as specified and directed

S&F Aluminium anodised barrel tower bolts of extruded section 75mm long complete all as specified and directed

S&F for Aluminium anodised, barrel tower bolts 150mm long of ex- truded section and fixed complete all as specified and directed

S&F 300 mm long aluminium alloy, anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and directed

S&F in repairs 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed

Hacking out old broken glass(any thickness, size, quality or discription) from wooden frames or stone, concrete or brick surrounds , glazed with putty or fixed with beads

S&F Sheet glass 3 mm thick ordinary quality and glazing with oil putty incl wooden beads supply & fixing in square n exc 0.5 sqm in each pane complete all as specified and directed

S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares in exc 0.5 sq.m in each pane complete all as specified and directed

S&F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including taking out wooden beads and incl supply & fixed wooden beads in the same position complete all as specified and directed

S&F in repair harrison rails 20mm dia, mild steel, chromium plated with fixing brackets, stops, rollers etc.complete all as specified and directed

S & F 6 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Alumi- nium frame work with screw as work in ceiling flat or sloping.

S&F anodised aluminium snap grid frame work Size of grid 605 x 605mm for false ceiling etc complete all as specified and directed.

M&L for 15 mm thick cement plaster on brick or concrete surface in cement mortar (1:6) included finishing surface even and smooth without using extra cement on walls etc complete all as specified and directed

M&L for 10mm thick cement plaster on concrete surface in cement mortar (1:3) included finishing surface even and smooth without using extra cement on ceiling etc complete all as specified and directed

M&L for 15 mm thick cement plaster on brick or concrete surface in cement mortar (1:4) included finishing surface even and smooth without using extra cement on walls etc complete all as specified and directed

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over one coat of alkali registant priming paint etc complete all as specified and directed.

Ditto all as per item No 46 above but in ceiling etc complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint white or tinted including scaffolding arrangement, trestles, ladders etc complete all as specified and directed.

M&L for Joint free non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but n exc 0.18 Sqm (400x400x7 to 8 mm thick) as in flooring etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile laid over & including 15 mm thick screed bed cement mortar (1:6) complete all as spcified..

M&L for Joint free non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but n exc 0.18 Sq (400x400x7 to 8 mm thick) as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile laid over 10mm thick rendering in CM (1:4) complete all as spcified..

M&L for coloured Glazed ceramic tiles as in vertical surface of Size 350x 250 x7mm /450x350x7 mm set and jointed in neat cement slurry laid over 10 mm thick cement rendering in cement mortar 1:4. and pointed in white or colour cement to match the tile complete all as specified.

M & L for machine cut superior quality Kota stone slab flooring 20-25 mm thick over cement screed , laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete match including bulnosed to edges complete and incl 20 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed

Demolition of brick / block masonry / Stone masonry built in Cement mortar complete all as specified and directed.

M&L for precast cement concrete (1:3:6) type C-1 ( using 20mm graded stone aggregate ) block masonry with solid blocks exc10 cm thick in width and setting in cement mortar (1:6) complete in wall complete all as specified.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as directed.

S&F Galvanised corrugated mild steel sheeting 0.63mm thick with two corrugations side lap, fixed with 'L' type or 'J' type of cranked hook in lieu of screws and washers in roofs, walls etc with grade of zinc coating 275.

S&F Galvanised plain mild steel sheeting 0.63mm thick in Ridge, hips, valley gutter, drip and straight flashing (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

S&F pre painted galvalume aluminium zinc coating GI based corrugatedsteel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering /cladding to wall fixed with L hooks or J types or cranked bolts complete all as specified and as directed (i) Work to be execute in any respective ht of building

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F rolled mild steel in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming to Fe-290 (Gde E- 165 ) complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces incl preparation of surfaces complete all as specified and directed.

S&F in repair 20mm thick second class hard-wood in eaves boards etc complete all as specified and directed

M&L for 20 (+ /- 2mm) thick Granite (of jet black ) work (table rubbed and polished ) in steps ,jambs ,pillars,window cills, cooking plateforms and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified. Exposed edges to make half round complete all as specified and directed..

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Chief

M&L and fixed in repair 18 mm thick for prelaminated particle board interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screw to timber frame work

S&F in repair Door closer hydraulically regulated,designation No. 2,universal type, aluminium (Die cast) body suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed etc. complete all as specified

Sarkar Enterprises

S Y Itkar Construction and Company

Mourya Enterprises

AMW Construction and developers

Sunil Constructions