Special repairs to JCOs MD Accn Bldg No P-231 under GE (West) Jalandhar Cantt

Amount

Demolition of cement concrete(unreinforced) in any description or in any position or as in sunken portion complete all as specified and as directed.

M&L for cement concrete type E - 2, 1:5:10 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.

M&L for applying two coats of SHALIMAR SUPERCRETE/NITOBOND water proofing coating on the entire surface of sunken portion all as specified .

M&L for 15mm thick cement screed in CM 1:3 admixed with integral water proofing compound FOSROC’s complast X 421 IC @ 130ml per bag of cement incl a bonding coat of FOSROC”s Nito bond AR cement slurry/STP NO 1 liquid @ 200ml per bag of cement complete all as specified.

M&L for 25 mm thick PCC (1;2:4) type B-1 using 20mm graded stone agregete to receive top layer of tiles complete all as specified and as directed.

M&L for PCC (1;2:4) type B-1 using 20mm graded stone agregete as in sides of rounded or chamfered on edges of sunken floor complete all as specified and as directed.

S&F 32mm dia GI pipe bevelled cut at both ends by making hole in walls sunken portion approx above the RCC slab and ceiling finished the hole with cement plaster 1:2 to match with existing surfaces complete all as specified and as directed.

Dismantling of brick tiles single layer as in roof covering complete all as specified

Demolition of mud in roofs any thickness including plastering and leeping(whether full thickness removed or only a part thereof) complete all as specified.

Roughning old concrete surface/floor by picking, sweeping clean and washing down with water to remove dust or removing any type of existing treatment complete all as specified.

M&L for applying evenly a coat of bitumen primer at the rate of 0.3 kg per sqm of the surface area complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate)as in roof padding concrete to bring the extg slab in slope of 1:40 complete all as specified and directed.

M&L for fixing APP based polymeric membrane minimum weighing 3kg/sqm and min 3mm thick reinforced with polyster non woven fabric (wt not less than 150gms/sqm) laid on primed surface by forced application complete all as specified and directed.

M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.20 kg per sqm incl cleaning surfaces complete all as specified

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate)as in roof kerbs or mud stops, benching rounded or chamfered on edges complete all as specified and directed.

M&L for 40mm thick brick tiles laid in cement mortar 1:6, 15mm thick and joints grouted flush with cement mortar 1:3 mixed with 5% of crude oil by weight of cement on APP membrane complete all as specified

All as per item No. 16 above but except tiles complete all as specified and directed.

M&L for flush pointing in cement mortar 1:3 on brick tiles laid flat complete all as specified.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M & L for brick work with sub class 'B' bricks in CM 1:4, straight or curved on plan exc 6 mtr mean radius, using old size bricks complete all as specified and directed.

Taking down cement plaster on wall built in cement or cement lime mortar incl raking out joints, hacking for key, scrubbing out with water etc. complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces in CM 1:3 on ceiling and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for preparing new plastered surfaces of wall and applying 2 coats of cement based paint over a coat of cement primer complete all as specified and directed.

M&L for preparing new plastered surfaces of ceilling and applying 3 coats of white wash complete all as specified and directed.

M&L for preparation of new surface of wall with birla putty filling/chalk whiting on plastered surface and applying two coats of oil emulsion distemper white or printed on walls complete all as specified and directed.

M&L for complete removal of existing treatment on wall and applying two coats of oil emulsion distemper (white) on one coat of putty filling on walls etc (Surface finished even and smooth) complete all as specified and as directed by Engineer-in-Charge.

M&L for complete removal of existing treatment on wall and applying two coats of cement base paint over a coat of primer on walls etc (Surface finished even and smooth) complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of old surfaces of ceiling including complete removal scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc including cornices, pilasters etc (plastered or unplastered surfaces) and applying three coat of white (lime) wash complete all as specified and as directed by Engineer-in-Charge.

M&L for repairing of RCC projection of chhajjas, roof, facia etc at any height upto triple storey by demolition of damaged portion including scraping, cutting, cleaning exposed reinforcement and providing cement concrete (1:1.5:3) type A-1 using 12.5mm graded crushed stone aggregates and reinforced with welded mesh weighing 2 to 3 kg per Sqm as per requirement and finishing the surfaces even and smooth with cement sand mortar (1:3), 5 mm thick, the thickness of projection to be repaired shall be 70mm to 80mm including necessary formwork and finishing the surfaces to match with the existing complete all as specified and as directed by Engr-in-Charge. (Note: The rate quoted by the contractor shall be included for scaffolding, welded mesh etc) (EIC shall ensure to get the complete work executed against this term before submission of completion)

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L non skid ceramic colour tiles 7 to 8mm thick joint free edge cut area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 sqm set and jointed in neat cement slurry in floor and pointed in colour cement to match the sade including sceed bed or bedding layer of mortar 15 mm thik 1:4

All as per item No 33 above but as in skiting /dado including rendering/screeding 1:4, 10mm thick complete all as specified and drected

M&L for coloured glazed ceramic tiles in vertical surface 450x300x7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match including backing coat 10mm thick CM 1:4 complete all as specified

M&L for granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and cut oval type in one end for WHB including 15mm thick screed bed CM 1:4 as per directed by Engr-in-charge.

M&L machine cut kota stone flooring 18 to 20 mm thick over cement sreed beed 1:4, 20mm thick laid and jointed in grey cement slurry mixed with pigment to match the shade of the slab including rubbing polishing as in landing of stair complete all as specified and as directed

All as per ser item No 37 above but as in skirting over rendering 10mm thick cement mortar 1:4 complete all as specified and as directed.

Material & labour for chequered cement concrete coloured tiles 30cm x 30cm x 25mm thick, with grey cement and pigment, jointed and pointed in neat cement slurry in floor laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

Demolition of reinforced cement concrete above ground level n.exc 15 cm thick complete all as specified and as directed.

M&L for cement concrete type B1-1:2:4 (20mm graded aggregate) in slab supproted on walls, beam and columns in floor, roof etc complete all as specified and as directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape reqd, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs etc not exc 200mm thick (Hor or sloping) flat rough finished surface of concrete complete all as specified and as directed.

Demolition of cement concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) or as in sunken portion complete all as specified and as directed.

M & L PCC 1:3:6, type C-2, 50mm thick as in plinth protection, surface finished fair and smooth without using extra cement complete all as specified and as directed.

Taking down shutter exc 1.00 Sqm but n.exc 2.00 sqm and refixing in the same opening after doing necessary repair like cutting , change of position of hinges and making good to the old surface etc complete all as specified and directed

Taking chowkhat or frame with shutters (without taking off the shutter from the frame ) n. exc 1.5 Sqm each complete all as specified and as directed.

All as per ser item No 47 above but exc 1.5 sqm but n. exc 4 Sqm each complete all as specified and as directed.

Supply & fix Steel windows 1.25 mm thick Box type (primer coated) ERW hollow ‘P’ section of size 60mm x 25mm single rebated comprises of glazed skeleton shutter EWR Sec 50mmx20mm and 1mm thick and two open able leaf consisting two Nos sash bar of ‘T’ section 20mm x 3mm complete welded to frame with one vertical mullion of EWR box type ‘T’ section of size 60mmx25mm and 1.25mm thick including cuttings holes and making good dismantled portion in PCC (1:2:4) type B1 using 20mm graded stone aggregate. Four Nos for each window including following fittings welded to framed shutter :- (a) Holdfasts 150mm long 12mmx3mm made to shape per window -04 Nos, (b) Handle of Z Sec 20mmx25mm, 100mm long per leaf-01 No, (c) MS tower bolt 150mm long per leaf -02 Nos, (d) ‘Z’ sec 20mm x 25mm, 100 long stopper per leaf -01 No, (e) Cleat 55 mm long of hollow square 15mmx20mmx63mm welded to hinges per leaf -01 No, (f) MS pintal hinges of size 75mmx12mm per leaf -02 Nos, (g) Fabrication and fixing arrangement as per drawing No CEJZ/TD/1019, Sh 1/3 to 3/3 and No. CEJZ/TD/1020, Sh 1/3 to 3/3. Note : Glass, wire cloth, grills & painting shall be measured & paid for separately.

All as per srl item No. 49 here in before but of gauged shutter. Note for item No. 49 & 50 :- Drg No. CEJZ/TD-1019 & 1020 are not being uploaded and the same can be seen in office of CWEJRC on any working day. Wire gauge, grill & painting shall be measured and paid for separately

S&F mild steel work grill gratings etc with ends of bars shouldered and or riveted or fixed in spike, framed guard bars barred iron doors ladders frame balusters walk ways confirming to Fe- 290, Gde E-165 complete all as specified and as directed.

S&F mild steel frame work as in door /cup board or other section with gusset plates rails brraces etc comple drilled or fixing of steel sheeting or oter covering doors etc to be prepared for hanging or sliding with and including either hook and hinges also fastening and fixing complete Fe-410 W(Grde E -250 quality A)

Supply and fix 35mm thick 2nd class hardwood plain framed, panelled shutters (two panels), with lock rail and panels of 9mm thick BWP commercial ply or of veneered particle board 12mm thick with commercial veneering on both faces with rails and style of 2nd class hard wood. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 2nd class hardwood glazed and skelton shutters 35mm thick open rebated and prepared to receive glass,gauge etc (without sash bars) edging of framing plain, chamfered or rounded with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Pt-I, Section 8, Clause 8.24(a). complete all as specified and directed.

M&L for 25mm flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply and fix 2nd class hard wood small fittings such as brackets of any type latch and hinge blocks, shaped door and window stops and the like, including all necessary labours, articles n exe 200 Cu cm including 50mm MS hinges medium weight pined to each fitting complete all as specified and directed.

M&L 18/19mm thick prelaminated particle board exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber framed work including fixing arrangement complete all as specified

M&L Hasp and staple safety type aluminum anodised 75mm size with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified

S&F 100mm size butt hinges, mild steel medium weight cold rolled and fixed complete all as specified

S&F 100mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed complete all as specified and directed.

S&F Mild steel barrel tower bolts 300mm long ,ISI marked stove enamelled black, with bright bolt and fixed complete all as specified and directed.

S&F mild steel pressed handles, oval type, stove enamelled black complete all as specified and as directed 150mm size

S&F 300 mm long mild steel sliding door bolts, ISI marked clip & bolt type, stove enamelled black, with bright bolt not less than 16mm dia with and including minimum 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed.

S&F galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete fixed with tinned tacks or galvanised wire staples all as specified and as directed

Supply and fix sheet glass ordinary quality 3mm thick n, exc 0.5 sqm in each pane complete all as specified and directed.

Hacking out old broken glass in any thickness size quality or description from metal frames complete all as specified and directed.

S&F Figured glass 4mm thick, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and as dirrected

S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and as dirrected

M & L for preparation of new surfaces of wood of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamelled paint over one coat of pink primer complete all as specified and directed.

M & L for preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamelled paint over one coat of red oxide complete all as specified and directed.

M & L for preparation of old steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified

M & L for preparation of old wood and wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer including removal of existing treatment complete all as specified.

S&F continuous piano hinges mild steel bright finish of flap width 40mm complete all as specified.

S&F 40m dia cup board knobs fixed with nut , screw and washer of brass polished complete all as specified.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with M. S Square tube, supplying & fixing in opening as per specification & as per manufacturer's instructions.

S&F Factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel with wood free EPS design with 2mm thick moulded prelam PVC sheet on the front face & 2mm Plain colour PVC sheet on back face , supplying & fixing in frame at site as per specification & as per manufacturer's instructions.

S&F 125mm size aluminium handles, cast type, anodised and fixed of approved make & ISI marked complete all as specified.

S&F aluminium anodised barrel tower bolt of extruded section of 200mm size complete all as specified.

S&F 300mm mild steel ordinary rat rail pattern spring including roller and roller plates complete all as specified.

S& F 500 Ltr capacity of rotational moulded polyethylen water storage tank double layer(Cylindrical vertical with closed tap) hoisted and fixed in position including S&F 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600 mm long with fitting and including dismantling of existing RCC/PVC tank complete all as specified and as directed by the Engineer-In- Charge.

S&F in repair PVC floor trap size 75mm dia out let with grating including connection to waste pipe with cement jointing including taking down existing trap complete all as specified and directed

S&F in repairs grating 100mm dia of PTMT minimum weight 25 gram complete all as specified and directed

S&F in repair PVC valveless syphonic action type flushing cistern, low level white with inlet ball valve float and handle including brackets. 10 ltr capacity complete all as specified and directed

S&F in repairs vitreous china squatting pan 'ORISSA PATTERN ' size 580mmx440mm 'white with integral foot rest (excluding flushing cistern and flush pipe ) including connection to trap and to flushing pipe anti syphonage pipe etc complete all as specified and as directed

S&F in repair vitreous china wash hand basin, white flat back, size 550mmx400mm fixed on and including cast iron cantilever brackets 32mm dia brass waste coupling and including fixing of tap waste fitting and union complete all as specified and as directed . Note: pillar tap shall be measured as supply only under respective items.

S&F in repair PVC connection 15mm dia and 450mm long with both ends brass fly nut complete all as specified and as directed.

S&F in repair 15mm dia bore pillar tap cast copper alloy, wih capstan heads, chromium plated , screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shank and flynust, screwed for iron pipe and fixed complete all as specified and as directed

S&F 32mm dia waste pipe for WHB complete all as specified and as directed

Supply only 32mm dia waste fitting brass chromium plated for basin with long screwd shanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified and as directed

S&F in repairs 15mm dia bore stop valves cast copper alloy chromium plated fancy type with long shank & cup (concealed type) complete all as specified and as directed.

S & F stop cock/angle cock fancy type chromium plated with cast copper alloy screwed down high pressure with or without lattered hot and cold with long screwed shanks and fly nuts fixed in repair 15mm bore complete all as specified and as directed.

Supply & fix in repairs 20mm dia gun metal gate valves with iron wheel screwed both ends for iron pipe complete all as specified and directed.

Taking up or down existing steel tubing 15 mm dia and connections including cleaning for refixing or removal to store complete all as specified and as dircted.

Taking up or down existing steel tubing 20mm dia bore and connections including cleaning for refixing or removal to store complete all as specified and as dircted.

S&F 15mm dia bore GI tubing, jointing and testing galvanised iron tube medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings, the rate also included for cutting through walls floors etc. complete all as specified and as dircted.

S&F 20mm dia bore GI tubing, jointing and testing galvanised iron tube medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings, including for cutting through walls, floor complete all as specified and as dircted.

Refixing only 15mm dia bore GI tubing, jointing and testing galvanised iron tube medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings, complete all as specified and as dircted. Note : quoted rate also included for cutting through walls floors etc.

Refixing only 20mm dia bore GI tubing, jointing and testing galvanised iron tube medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor with new fittings, complete all as specified and as dircted. Note : quoted rate also included for cutting through walls floors etc.

M & L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as dircted.

S&F in repairs fancy type chromium plated cast copper alloy bib taps long shank & cup 15mm dia bore complete all as specified and as directed

S&F ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe or brass ferrule 20mm bore complete all as specified and as directed

S&F in repair brass chromium plated shower rose 125mm size with long body fancy type including fixing to steel pipe or union complete all as specified and as directed.

Supply & fixing in repairs stainless steel sink with drainage board made out of 1mm thick sheet for kitchen or laboratory with plugs, washer and wastes pipe , cast iron cantilever brackets and connecting union over all size 915 x 460 mm with bowl size 410 mmx 330 mmx 160 mm complete all as specified and as directed

S&F in repair brass chromium plated tubuler towel rail 20mm dia D type, 60cm long between flanges complete all as specified and as dirceted.

M&L for 25 mm dia mild steel pipe curtain rod, powder coated fixed with & incl MS powder coated hooks/brackets and decorative finials (at both side), curtain rings (Min 5 Nos rings per running mtr of curtain road) complete all as specified and as directed.

S&F CP/Brass peg set of six fancy type complete all as specified and as directed.

S & F as in repair pre-fabricated stainless steel plate rack made out of 1 mm thick stainless steel plate jointed with brass screws of size 600 x 750mmx 250mm complete complete all as specified and directed.

S&F stainless steel soap dish complete all as specified

Taking up cast iron/RCC/AC pipes of 80 mm bore (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead complete complete all as specified and directed.

Taking up cast iron/RCC/AC pipes of 100 mm bore (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead complete complete all as specified and directed.

S & F 110 mm dia PVC (SWR) pipes first quality single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F 110 mm PVC (SWR) bends any radius provided with access door complete all as specified and directed.

S & F 110 mm PVC (SWR) branch piece double Y equal or unequal complete all as specified and directed.

S & F 75 mm dia PVC (SWR) pipes 1st quality single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F 75 mm PVC (SWR) bends any radius provided with access door complete all as specified and directed.

S & F 75 mm PVC (SWR) branch piece double Y equal or unequal complete all as specified and directed.

S & F 100 mm PVC (SWR) vent cowl complete all as specified and directed.

Taking down carefully existing point wiring of any type (i.e. wooden surface conduit casing capping or concealed conduit) complete for light or fan or socket or power etc on wooden batten or in conduit including fittings and accessories like switches, sockets, lights fitting, regulator, wooden board and making good disturbed portion to match with existing complete all as specified and directed.

Taking down U/S cable of 4 core size and any type as directed by Engr-in-charge.

Taking down U/S cable of 16 Sqm, 2 core size and any type as directed by Engr-in-charge.

Taking down main switch/DB of any size and making good distrub surface of wall/floor complete all as specified and directed

Material & labour for concealed point wiring complete with single core 1.5 Sqmm (nominal area) PVC insulated and unsheathed cable 1100 volts multistranded, copper conductor cable (FRLS) drawn through and including PVC concealed conduit not less than 20mm dia bore medium grade (ISI marked) and accessories like bends, tees, junction boxes etc, fix on wall or ceiling surfaces all as specified including 1.5 sqmm , FRLS, copper multistranded cable as earth wire including sunken pressed steel terminal boxes and bakelite white/ coloured top sheet cover 3.0 mm thick , for One light point / fan point / call bell point controlled by one way switch complete all as specified and directed.

All as per srl item No 123 here-in-before but one light point controlled by two, two way switch complete all as specified and as directed

All as per srl item No 123 here-in-before but 3 pin socket outlet, 5 Amps on same board complete all as specified and as directed.

All as per srl item No 123 here-in-before but for 3 pin socket outlet, 5 Amps on independent board complete all as specified and as directed.

All as per item No. 123 above but with 4.00 sqmm multistranded copper conductor FRLS cable with 4 sqmm earth wire for one 6 pin socket outlet 15 amps on independent board, complete all as specified and directed.

Supply and fix switch piano flush type, 5 Amps, 240V AC, single pole, one way complete all as specified and directed.

Supply and fix switch piano flush type, 5 Amps, 240V AC, single pole, two way complete all as specified and directed.

Supply and fix switch piano flush type, 15 Amps, 240V AC, single pole, one way complete all as specified and directed.

Supply and fix socket out let multi purpose 5 Amps 5 pin flush type complete all as specified.

Supply and fix switch socket combination multi purpose flush type, 6 pin 15 Amp 230/250 volts, AC with ISI marked multi pin complete all as specified.

Supply and fix switch bell push flush type, 5 Amps, 240V AC, single pole, one way complete all as specified and directed

Supply and fix call bell, ding dong, AC single phase, 230 volts complete all as specified and directed.

Supply and fix decorative wall mounting type with colour ABS housing with polycarbonate range and glass shade with 5 watt LED retrofit lamp 6500K (White colour) complete complete all as specified and directed.

S & F ceilling rose surface type bakelite 65x50mm three terminal all as specified and directed

S & F stepped socketed type electronic fan regulator flush type five steps all as specified and directed

M&L for sub main wiring with two runs of single core PVC insulated, unsheathed copper condutor, multi stranded cable of size 6.00 Sqmm 1100 volts grade drawn through PVC concealed conduit of size 25 mm (ISI marked) including PVC accessories complete incl cutting and chasing and making good etc including one run of 6.00 Sqmm single core copper conductor multi-stranded PVC insulated, unsheathed cable as earth wire continuity conductor complete all as specified and directed by Engr-In-Charge Note: Two run of 6.00 Sqmm cable and one run of 6.00 earth wire & 25 mm PVC conduit shall be measured as one unit length.

Supply and lay XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq. mm 4 core complete all as specified and directed by Engr-In-Charge

Excavation in trenches in in any type of soil not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of cables, RCC/Steel tubular poles/stays and struts etc getting out including trimming sides and forming bottom surface all as specified and directed at site.

Returning filling layers including leveling watering and well ramming in layers not exc. 25cm thick each, back in trenches after cables have been laid and tested, poles, stays , struts have been erected and tested all as specified and directed at site.

M&L for river sand cushioning with a layer of sand 8 cm before laying of cable and 15 cm after laying of cable all as directed by Engr-in-Charge Note: Punned down thickness shall be measured.

Removing excavated surplus soil (Soft/loose) obtained from excavation to a distance n.exe 50 mtr and depositing where directed at a level n.exc 1.5m above the starting point all as specified and directed.

Supply and laying of old size sub class brick laid in trenches over the cable for protection all as specified

Supply and fix DB SPN 8 way double door for MCB 240 Volts with 200 Amps rated bus bar complete all as specified and directed.

Supply and fix distribution board vertical TPN, double door, 4 way 240 volts with sheet metal enclosure 200 amps bus bar suitable for fixing of MCCB complete all as specified and directed.

Supply & fix MCB, 32 to 63 amps SPN 240 volts, B series complete all as specified and directed.

Supply & fix MCB, 6-32 amps SP 240 volts, B series complete all as specified and directed.

Supply & fix MCCB TPN, 100 Amps 415 volts complete all as specified and directed.

Supply & fix LED light fitting 20W (double side) including LED lamp with 2100 lumen output with internal surge protection device of 4KV with voltage band of 140-280V CRI-6500K (White light) fixtures box type with retrofit LED rod 20 watt and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75mm 3 core complete all as specified and directed. Make :Havells cat part No. LUMILINEPLUSBS20WLED865SPCSS or equivalent of group 1 as mentioned in appendix 'B'

Material and labour for earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of theplate not less 1.5 mtr deep below normal ground level connected to GI earth wire 4mm dia connected to earth plate earth plate by means of nut, bolts, check nut & washer of galvanized iron or of steel, GI earth wire will be protected by 15 mm dia GI pipe 'light grade', watering pipe 20 mm dia GI 'light grade', GI wire meshed funnel, alternate layer of char coal and salt on all side to earth plate upto thickness of 150 mm, filling of black cotton soil in earth pit upto ground level, PCC chamber recessed for and including RCC cover including all necessary excavation & earth work, earth wire connected to O/H continuous earth wire on pole, testing the earthing after completion complete all as specified and directed. Note :- (I) Earth pit shall be constructed 50cm from the side of excavation to avoid sinking of pit (II) PCC chamber shall be (1:3:6) using 20mm graded stone aggregate and 50mm thick RCC (1:2:4) type B-1 cover slab reinforced with 8mm dia TMT steel bars @ 100mm c/c both ways complete all as specified and directed.

Supply & fixing in replacement LED street light fitting 60 W Endura pearl plus including LED lamp pressure die cast aluminium IP-66 with surge protection device of 10 KV, IK7 LED (SEOUL) 6500 and connecting electrical to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75 mm 3 core incl bracket and fixing complete all as specified and directed by Engr-in-Charge Make: Havells Cat Part No ENDURAPEARLNEOSL60WLED757PASYTOPC or equivalent of group 1 as in Appx 'B'

Supply and lay GI tubing light , grade 40mm bore with all necessary fittings laid in trenches under road crossing in floors complete all as specified and directed.

Supply and fix lamp holder PVC/Polycarbonate type with back plate including 9 watt LED lamp complete all as specified and directed

Barmotra Infrastructures

M/S Kuldip Construction Co.

ASHOK KUMAR MAHAJAN