CA NO. GE(P) AF/GUR-54/2022-23 SPECIAL REPAIR REPLACEMENT TO E M EQUIPMENT, LT CABLES AND CERTAIN OTHER SANCTIONED WORK AT AF STATION PALAM UNDER GE P AF GURGAON

Amount

Schedule-A

Supply, install,commissioning and testing 5 star cooled split type unit air conditioner electric driven single phase of capacity 2 TR,Eco friendly refrigerant, hi wall split units indoor/outdoor unit complete with cordless remote control unit and with inbuilt air ioniser and Plasma filter for better indoor air quality with 5 star rated, auto restart facility, 100 % copper tube and condenser , including excess copper tubing if required beyond the length supplied with AC unit and PVC conduit of 15mm dia not exceeding 2.5 mtr long for water drain and making good to disturbed surface with cement mortar ratio of 1:3 and testing complete all as specified and directed by Engineer-in-charge. Make :Voltas,Blue star, Hitachi, Daikin. Note:- (i) Rate quoted for items includes cost of all civil work like cutting to wall ceiling, floor, filling with PCC, finishing the surfaces with existing to match etc, if required for installation of AC unit as directed. (ii) Required copper pipes for installtion shall be deemed to be included in the quoted rates (iii) Old item retrieved shall be removed deposited to the AGE E/M store , the cost of the dismantling transporting and depositing shall bedeemed to be included in qouted rate

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 2.0 KVA complete all as specified and as directed.

Supply & fix 1200 mm sweep copper wound ceiling fan complete all as directed by Engineer-in-Charge. Make:- Bajaj/Compton/Havells

Supply and fix AC 230 volts steel body evaporative type desert cooler electric driven (single phase), having nominal air flow of capacity 5000 CuM per hour with stranded 2.5 mtr length of power cable with 3 pin plug. Make - Ram coolers /Havells /Bajaj. Note : Old item retrieved shall be removed deposited to the AGE E/M store , the cost of the dismantling transporting and depositing shall bedeemed to be included in qouted rate

Supply and fix refrigerator, electric driven (single phase) AC 230 volts , capacity 310 Litres(10% +) , 5 star rated direct cool double door refrigerator with PUF insulation, coil material is copper and having inbuilt stabilizer. Make : Voltas,Blue star, Hitachi, Daikin Note : Old item retrieved shall be removed deposited to the AGE E/M store , the cost of the dismantling transporting and depositing shall be deemed to be included in qouted rate

Supply and fix refrigerator, electric driven (single phase) AC 230 volts (10% variation), capacity 190 Litres(+ 10%), 5 star rated direct cool single door refrigerator with PUF insulation, coil material is copper and having inbuilt stabilizer. Make : Voltas,Blue star, Hitachi, Daikin Note : Old item retrieved shall be removed deposited to the AGE E/M store , the cost of the dismantling transporting and depositing shall be deemed to be included in qouted rate

Supply, installation and testing of single phase, Five star rated vertical type 25 Ltrs water heater storage type Geyser, with 1.2 Mtr 3 core copper cable with 3 pin metal top 20 amps and inner tank made of glass lined coated with glass coated heating element . The standing working pressure is 8 bar and suitable for high rise buidings with seven years tank warranty and two years body and electrical components warrenty complete all as directed Make: Havells- Model No Puro turbo /Racold - Model No Eterno Pro / A.O Smith Model No HSE-SDS.

Supply, installation and testing of extreme hard water resistance type 5 star rated 50 ltr capacity vertical type geyser (white / ivory colour as directed by Engg-in-Charge) having 1500 watt heating element, PUF insulated shock proof body and 8 bar max working pressure with seven years tank warranty and two years body and electrical connection pipe warranty complete all as directed. Make: Havells Model Puro turbo or equivalent in Bajaj/Cromption/V-guard as approved by GE.

Supply and fix water cooler electric driven (single phase), having approx storage capacity of 80 litre and nominal cooling capacity of 40 Litres per hour and water tank sheet meterial shall be with stainless steel. Make : Voltas / Bluestar/ LG Note : Old item retrieved shall be removed deposited to the AGE E/M store , the cost of the dismantling transporting and depositing shall bedeemed to be included in qouted rate

S&F AC mounting bracket 24 inch heavy duty wall mounted bracket load bearing capacity upto 50 kg all as directed by Engr-in-charge.

M&L for sub main wiring of two run with 04 Sqmm single core PVC insulated, FRLS, flexible multi stranded copper conductor cable 1100 volts grade, drawn through and including PVC conduit pipe of size 20 mm medium grade and accessories of suitable size and fixed on wall/ceiling including one run of 4.0 Sqmm single core PVC insulated, FRLS , flexible copper cable as earth continuity conductor in green color all as specified and as directed.

S&F for Steel water tubing 15 mm dia in bore , medium grade , galvanised with all fittings , fixed complete to wall and ceiling or laid in floor complete all as specified and as directed.

S & F Stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions of size 15mm, CP fencing type complete all as specified and as directed.

S & F 15 mm size Bib taps , cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe ,CP type complete all as specified and as directed.

S & F PVC connection of size 15mm x 450mm long for hot water supply complete all as specified and as directed.

S&F sheet metal enclosure for 220 volts 20 Amps with a three pin and earth plug top with socket and one single pole MCB 20 amps complete as well as specified and directed.

S & F MCB SP of rating, 32 Amp,240 volt, 10 KA 'B' Series type complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregates for filling in road cuts/hard standing etc all as specified and as directed.

Supply and laying 80 mm bore galvanised iron tubing, light grade with all fittings for passing of cables under ground complete all as specified and as directed.

Supply and laying 50 mm bore galvanised iron tubing, light grade with all fittings for passing of cables under ground complete all as specified and as directed.

Supply and laying 40 mm bore galvanised iron tubing, light grade with all fittings for passing of cables under ground complete all as specified and as directed.

M & L for MS cross arm bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of two coats of aluminium paint over a coat of zinc chrome primer complete all as specified.

M&L for transformer fencing around the brick plateform with GI chain link fencing of size 100mmx100mm, 4mm dia including line wires, any mesh, size and type of standard, rails, straining bolts etc. Mild Steel work such as angle iron fencing post struts and flat iron fillets etc. Angle iron size 65x65x6 mm thick and post embeded in PCC 1:2:4 type B2 block 300 mmx300mmx400mm, (spacing of angle iron shall not be more than 2.5 M), including drilling holes, punching, splitting ends to secure chain link fencing and all necessary cutting, welding drilling, bolting or riveting etc and including bands strap (Flat iron 50x5mm thick) support for chain link, steel screw as required, 10 mm dia MS bar as in the bars placed horrizontally at bottom, middle and top along length of fencing, height to fencing 2.1 Mtr clear from GL and approx 25 m length with necessary gate made out of angle iron 50mmx50mmx5mm with locking arrangement c, with 65 mm Godrej pad llock, handle, hinges, etc complete (Approx size 1200mmx1800mm) including one coat of redoxide zinc chrome primer and two coats of synthetic enamel paint on prepared steel surfaces (except GI chain link fencing) all as specified and directed.

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth and getting out soft/loose soil complete all as specified and as directed for foundation of stay, laying of cable etc.

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth and getting out hard/Dense soil complete all as specified and as directed for foundation of stay, laying of cable etc.

Returning filling in soil including spreading, levelling, watering and well ramming in layers not exc 25 cm

Removing excavated material (soil) to a distance n.exc 50 m and depositing where directed at a level n.exc 1.5 mtr above the starting point all as directed.

Fly ash/burnt Bricks, sub class 'B' dry, well brunt bricks laid in trenches for cable protection all as specified.

M&L for sand filling in trenches for cushioning of cable complete all as specified and directed. Note:- Compacted / punned sand thickness shall be considered for the purpose of payment.

Taking up old serviceable/unserviceable UG cable from trench for replacement of size :- Earth work shall be measured and paid separately under appropriate items of Sch-'A')

(a) 10 Sqmm 2 Core to 35 Sqmm 3.5 Core

(b)70sqmm 3.5 core to 120 Sqmm 3.5 Core

Material and labour for XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade with cross sectional area of the following size :-

16 Sqmm 4 Core

25 Sqmm 3.5/4 Core

70 Sqmm 3.5 core

35 Sqmm 3.5 Core

120 Sqmm 3.5 Core

Boring of holes under road, pavement, hard standing for more than 5 mtr in length by trenchless, technology using ultra sound technique and necessary machine, including HDPE pipe of 80 mm dia suitable for 0.4 mpa working pressure all as directed by Engr-in-Charge..

Boring of holes under road, pavement, hard standing, drain etc by conventional method not exceeding 5 mtr in length for laying of cable for protection of pipe etc complete all as directed by Engr-in-Charge.

M&L for cutting the existing bitumen us road/payment/footpath upto 0.75 mtr in depth, 0.45 mtr in width and getting out excavated material and making good the damaged portion after laying the pipe, returning filling in mass concrete PCC 1:2:4 type B2 upto top of the road all as directed by Engr-in-Charge. Note :-(i) M&L for laying of pipe shall be measured and paid separately.

Cutting chases, pining in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc ; and cutting chases for concealed conduit wiring, etc and making good, cutting exceeding 10 cm but not exceeding 20 cm girth and 5 cm width.

M& L for Indoor/outdoor cable end terminal joints (Resin cast type kits ) any type complete suitable for LT PVC and XLPE insulated, sheathed UG cable for aluminium conductor cable and testing after joining of 4 core 35 to 50 Sqmm complete all as specified and directed.

All as per item No 37.0 here-in-before but 4 core 70 to 150 Sqmm size -ditto-.

M& L for straight through cable end terminal joints (Resin cast type kits) any type complete suitable for LT PVC & XLPE insulated, sheathed UG cable for aluminium conductor cable and testing after joining of 4 core 35 to 50 Sqmm complete all as specified and directed.

All as per item No 39.0 here-in-before but 4 core 70 to 150 Sqmm size -ditto-.

M&L for earthing complete with galvanised steel earth plate electrode size 60 cm x 60 cm, 6.3 mm thick burried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less than 1.5 metre below ground level, connected to galvanised iron or steel, earth strip 32 x 6 mm size by means of nuts, bolts check nuts and washers made of galvanised iron or steel, earth wire protected by galvanised iron pipe 15mm bore, medium grade and connected to main switch board or main control board as directed and including concrete pit in PCC 1:3:6 type C-1(using 20 mm graded stone aggregate), pre-cast RCC cover slab 30 cm x 30 cm x 10 cm with one lifting handle made of 8 mm dia MS bar funnel wire mesh, 20 mm bore galvanised iron or steel pipe medium grade for watering charcoal or coke and salt in alternate layers, necessary excavation and earth work in any type of soil complete all as shown in electrical Plate No 5 of MES Schedule Part- I and testing on completion all as specified and direced .

Supply, installation, testing and commissioning of outdoor type LT panel powder coated in replcement with structural siemens grey RAL 7032 shall be factory fabricated cubical panel board as per IS 8623 rated for short circuit rating of 50 KA front and back openable and lockable by key from both sides having louvers and air vent gasket and totally vermin proof made out of of 3.15 mm thick CRCA sheet duly compartmentalized for incoming and outgoing cooper busbar duly insulated with colour coded heat shrinkable sleeves and mounted arm DMC/ Epoxy insulators (size not less than 50 mm x 50 mm conical type at a maximum interval of 500 mm) of not less than 1.5 times the rating of main incomer. The incomer and all outgoing shall have extension link of capacity 1.5 times the rating of individual feeder. If the size of incoming/ outgoing cable is more than 120 sqmm, then the extension link shall not be less than 300 mm long, all links shall be insulated with colour coded heat shrinkable sleeves and supported arms DMC/ Epoxy insulators having provision for termination of incomer and outgoing cables. All control wires shall not be less than 2.5 sqmm multi stranded copper conductor and properly bunched/ tied, ferruled for proper identification and crimpled with adequate size of lugs. The cubical will have a bottom support of channel of suitable size, duly coated with zinc metal coating. A detachable pre drilled gland plate of thickness 3.15 mm cold zinc metal coated shall be provided with at the bottom for entry for armoured cable with adequate size of gland. Manufacturer name plate with feeder details and danger plate shall be provided at suitable visible place. Three MCB SP for protection of metering shall be provided . the panel shall have consist following (Make of LT Panel - Advance Switchgear/ Shalabh / Universal switchgear :-

Supply, installation, testing and commissioning of outdoor type LT panel powder coated with structural siemens grey RAL 7032 shall be factory fabricated cubical panel board as per IS 8623 rated for short circuit rating of 50 KA front and back openable and lockable by key from both sides having louvers and air vent gasket and totally vermin proof made out of of 3.15 mm thick CRCA sheet duly compartmentalized for incoming and outgoing cooper busbar duly insulated with colour coded heat shrinkable sleeves and mounted arm DMC/ Epoxy insulators (size not less than 50 mm x 50 mm conical type at a maximum interval of 500 mm) of not less than 1.5 times the rating of main incomer. The incomer and all outgoing shall have extension link of capacity 1.5 times the rating of individual feeder. If the size of incoming/ outgoing cable is more than 120 sqmm, then the extension link shall not be less than 300 mm long, all links shall be insulated with colour coded heat shrinkable sleeves and supported arms DMC/ Epoxy insulators having provision for termination of incomer and outgoing cables. All control wires shall not be less than 2.5 sqmm multi stranded copper conductor and properly bunched/ tied, ferruled for proper identification and crimpled with adequate size of lugs. The cubical will have a bottom support of channel of suitable size, duly coated with zinc metal coating. A detachable pre drilled gland plate of thickness 3.15 mm cold zinc metal coated shall be provided with at the bottom for entry for armoured cable with adequate size of gland. Manufacturer name plate with feeder details and danger plate shall be provided at suitable visible place. Three MCB SP for protection of metering shall be provided (27 ED HQ). the panel shall have consist following (Make of LT Panel - Advance Switchgear/ Shalabh / Universal switchgear :-

Supply, installation, testing and commissioning of outdoor type LT panel powder coated with structural siemens grey RAL 7032 shall be factory fabricated cubical panel board as per IS 8623 rated for short circuit rating of 50 KA front and back openable and lockable by key from both sides having louvers and air vent gasket and totally vermin proof made out of of 3.15 mm thick CRCA sheet duly compartmentalized for incoming and outgoing cooper busbar duly insulated with colour coded heat shrinkable sleeves and mounted arm DMC/ Epoxy insulators (size not less than 50 mm x 50 mm conical type at a maximum interval of 500 mm) of not less than 1.5 times the rating of main incomer. The incomer and all outgoing shall have extension link of capacity 1.5 times the rating of individual feeder. If the size of incoming/ outgoing cable is more than 120 sqmm, then the extension link shall not be less than 300 mm long, all links shall be insulated with colour coded heat shrinkable sleeves and supported arms DMC/ Epoxy insulators having provision for termination of incomer and outgoing cables. All control wires shall not be less than 2.5 sqmm multi stranded copper conductor and properly bunched/ tied, ferruled for proper identification and crimpled with adequate size of lugs. The cubical will have a bottom support of channel of suitable size, duly coated with zinc metal coating. A detachable pre drilled gland plate of thickness 3.15 mm cold zinc metal coated shall be provided with at the bottom for entry for armoured cable with adequate size of gland. Manufacturer name plate with feeder details and danger plate shall be provided at suitable visible place. Three MCB SP for protection of metering shall be provided (MTR&S). the panel shall have consist following (Make of LT Panel - Advance Switchgear/ Shalabh / Universal switchgear :-

Material and labour for point wiring with 1.5 Sqmm (nominal area) PVC insulated and unsheathed single core with multistranded copper conductor in and including cutting of chases to lay stove enameled steel conduit (medium grade), exposed to surface wherever required including conduit as specified and making good to surface by sing CM 1:3 and using of wall finish paint to match the existing surface, as specified including all fittings and conduit accessories also, complete single core multistranded copper conductor cable size 1.5 Sqmm green in colour as earth continuity conductor connected to common earth dolly for one light/ fan point controlled by one, one way switch complete all as specified and as directed.

S&F flame proof switch socket & plug combined in LM6 cable termination box in LM6, 25A, 250V complete all as specified and as directed.

Supply and fixiing LED light fittings 120 watt flame proof, CMRI certified recommended for gas/ vapour group of IIA & IIB Zone 1&2 and IP65 protection with die cast aluminium housing with heat resistant toughened glass, with LED tube light fixtures drivers, holder, connector etc complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and as directed.

Note The amount of Rs 55,725/- against Schedule of Credit on Page No 131 shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance

SM CONSTRUCTION COMPANY

J B Electricals