DAY TO DAY MAINT AND CERTAIN BR WORKS INCLUDING PERIODICAL WORKS TO OTM, MD ACCN AT MARCOS, NTS, NAD DOLLYGUNJ, PROTHRAPUR FILTRATION PLANT, DAD QTRS, CHOULDARI DAM PEREIRA ENCLAVE UNDER AGE BR II AT GE MINNIEBAY, PORT BLAIR

Amount

M&L for preparation of old surfaces of wall and applying one coat of oil emulsion distemper, complete all as specified and as directed.

All as per item No 01 above but two coats of oil emulsion distemper complete all as specified and as directed.

All as per item No 01 above but on ceiling complete all as specified and as directed.

M&L for applying a layer of wall care putty on wall and making surface even and smooth complete all as specified and as directed.

M&L for preparation of old painted wooden surface and applying one coat of synthetic enamel paint of any description exc 10 cm width or girth, complete all as specified and as directed.

M&L for preparation of old painted steel surfaces over 10cm in width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old surfaces and applying one coat of acrylic emulsion weather coat premium quality antifungal exterior emulsion complete all as specified and as directed. Note : Rate inclusive of scaffolding at any height

M&L for preparation of old surfaces and applying two coat of acrylic emulsion weather coat premium quality antifungal exterior emulsion complete all as specified and as directed. Note : Rate inclusive of scaffolding at any height

M&L for preparation of old surfaces of wall and applying one coat of cement based paint complete all as specified and as directed.

M & L for cleaning the existing floor / Concrete surfaces/Path by washing rubbing etc to remove caked mud/ grease etc and applying high pressure wall jet of 120 PSI or move for obtaining a clean surfaces free from algae / organic particles and applying one coat of weather resistant floor paint complete all as specified and as directed.

Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces including raking out joints, hacking for key all as specified and as directed.

M&L for rendering 15mm thick plaster in CM (1:4) on brick/block wall or concrete surfaces finished even & fair including taking down cement plaster complete all as specified and as directed.

M&L for rendering 15mm thick plaster in CM (1:6) on brick/block or concrete surfaces finished even & smooth including taking down cement plaster complete all as specified and as directed.

M&L for applying two coats of oil bound distemper over a coat of primer on newly plastered surface of wall including preparation of surface, complete all as specified and as directed.

M&L for applying two coats of cement based paint over a coat of chalk whitning on newly plastered surface of wall including preparation complete all as specified and as directed.

M&L for applying two coat of acrylic emulsion weather coat premium quality antifungal exterior emulsion over a coat of primer on newly plastered surface of wall including preparation all as specified and directed

M& L for preparation of new wood/wood based surfaces exc. 10cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as directed.

Dismantling of stone slab of any description including cement mortar bedding but not backing, complete all as specified and as directed.

M&L for vitrified coloured ceramic tiles 10 mm thick (Square/ rectangular) area of each tiles not exc 0.36 Sqm in floors set and jointed in neat cement slurry and pointed in white/coloured cement to match over and including 15mm thk screed bed or bedding layer in CM(1:6) complete all as specified and as directed.

All as per item No 21 above but on dado / skirting over 10mm thick backing coat in CM (1:4) complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 8mm thick (Square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, in floor etc and jointed in neat cement slurry and pointed in white cement or coloured cement to match the shade of tile over and including 15mm thk screed bed or bedding layer in CM(1:6) complete all as specified and as directed.

All as per item No 23 above but as in vertical surfaces/skirting over and including 10mm thick backing coat in CM (1:4) complete all as specified and as directed.

M & L for Non Skid Ceramic Tiles, Coloured, of size exceeding 0.06 Sq.m and not exceeding 0.11 Sq.m, 7 mm to 8 mm thick [Square or Rectangular] as in Floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed.

M&L for glazed ceramic coloured tiles (light shade) of size 300x200x7mm thick for work on vertical surface such as skirting, dado, set & jointed neat in cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM (1:4) complete all as specified and as directed.

M&L for glazed digital ceramic coloured tiles in vertical surfaces 300x450x7 to 8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM (1:4) complete all as specified and as directed.

M & L for coloured chequered cement concrete tiles 30 cm x 30cm x 25 mm thick, set and jointed neat cement slurry and pointed with coloured or grey cement match with pigment, over and including 20 mm thick screed bed or bedding layer in cm 1:6 etc. complete all as specified and directed.

M & L for 300 x 300 x 10mm thick coloured heavy duty vitrified exterior chequered tiles as in floor/wall set and jointed in cement slurry and pointed in coloured cement to match laid over 15mm thick cement mortar in CM 1:6 complete all as specified and as directed.

M&L for 20 mm thick granite (of any type ) work (table rubbed mirror polished) edges rounded chamfered and bull nosed in steps, joints, cills, cooking platform & likes over screed bed incl pointing in white cement with admixture of pigment to match with shade of granite stone incl grinding and polishing over and including 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed.

Demolition of cement concrete in ground floor and pavings nexc 15cm thickness (below or above ground level).

M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in flooring/ hard standing/Path/plinth protection and similar works finished even and fair complete

Taking up or down 15/20mm bore steel tubing and connections and removal to store complete all as specified and as directed.

Taking up or down 25/32mm bore steel tubing and connections and removal to store complete all as specified and as directed.

S&F 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC fittings on walls/ceiling or laying in floors with proper clamping arrangements complete all as specified.

S&F 25mm outer dia CPVC pipes SDR 11 & Plain CPVC fittings on walls/ceiling or laying in floors with proper clamping arrangements complete all as specified.

S&F 32 mm outer dia CPVC pipes SDR 11 & Plain CPVC fittings on walls/ceiling or laying in floors with proper clamping arrangements all as specified.

S&F CPVC brass threded elbow 20mm outer dia complete all as specified and as directed.

S&F CPVC brass threded Tee for 25 x 20mm outer dia complete all as specified and as directed.

S&F CPVC Brass threaded adapter (FTA/MTA) of 20mm outer dia complete all as specified and as directed.

S&F CPVC Brass threaded adapter (FTA/MTA) of 25mm outer dia complete all as specified and as directed.

S&F Tank adaptor for 32mm outer dia CPVC Pipe complete all as specified and as directed.

S&F CPVC Union for 32mm outer dia pipe complete all as specified and as directed.

S&F Ball valves for 25 outer dia CPVC pipes complete all as specified and as directed.

S&F Ball valves for 32 outer dia CPVC pipes complete all as specified and as directed.

Cutting chases in concrete block walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing etc., and making good, cutting not ecx 10 cm girth complete all as specified and as directed.

Fixing only in repairs Bib Cock/Stop Cock/Mixers including cleaning, removing of blockages etc. of any type and size including replacement of brass spandle if required all as specified. Note : Brass spandle will be paid separately

S & F in repairs Vitreous china ware wash hand basin, white, flat back of size 550 mm X 400 mm including 32mm brass chromium plated waste fittings with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, etc complete all as specified and as directed.

S&F in repair 15mm bore fancy type CP Centre hole Wash Basin Mixure high quality without popup waste with 450mm braided hoses complete all as specified and as directed.

S&F in repair 15mm dia wall mixer cast copper alloy with capstan heads, chromium plated screwed down high, pressure with provn of overhead shower on upper side connecting legs and wall flanges high quality fancy type complete all as specified and as directed.

S & F in repairs to Bib Taps, cast copper alloy heavy duty, 15 mm dia, Chromium Plated, long body Fancy Type screwed down for iron pipe and fixed etc complete all as specified and as directed.

S & F in repairs to Two way Bib Taps, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type screwed down for iron pipe and fixed etc complete all as specified and as directed.

S & F in repair Pillar Taps, cast copper alloy, Chromium Plated, Fancy Type heavy duty, 15 mm dia, with capstan head, screwed down high pressure screwed for iron pipe and fixed complete all as specified and as directed.

S & F in repairs 15 mm dia bore cast copper alloy chromium plated angle cock/stop cock fancy type with long shank and cup and fixed, complete all as specified and as directed.

S & F in repairs 15 mm dia bore cast copper alloy chromium plated conceled type stop cock fancy type with long shank and cup and fixed, complete all as specified and as directed.

S & F in repair, CP Health faucet with 8mm dia, 1.2 Meter long flexible tube & wall hook alcomplete all as specified and as directed.

S&F in repairs brass chromium plated shower rose with 150mm long CP shower arm 125 mm size revolving type suitable for 15 mm bore pipes complete all as specified and as directed.

S&F in repair CP Toilet paper holder fancy type high quality complete all as specified and as directed.

S&F in repair sheet glass shelf consisting of 5.5mm thick sheet glass self assembly 12cm width with chromium plated guard and railing 50cm long, complete all as specified and as directed.

S&F in repair Corner glass shelf high quality of 5mm thick glass & CP railing with bracket complete all as specified and as directed.

S&F in repair high quality CP Towel Ring square with round flange fancy type complete all as specified and as directed.

S&F in repair CP towel rail high quality 600mm long with wall flange complete all as specified and as directed.

S&F in repair Waste pipe dia 32/40mm , 600mm long complete all as specified and as directed.

Supply only brass spandles for Bib Cocks/Stop Cocks/Wall/Basin Mixers etc complete all as specified and as directed..

S&F in repair Sinks with drainage board made of stainless steel 1mm thick for kitchen with plug washers, waste pipe and coupling includind bedding in cement mortar, two Nos of iron fixing bracket of required size and connecting union to pipe over all size 915mm x 460mm bowl size 410mm x 330 mm x 160mm, complete all as specified and as directed.

S&F in repair CP Waste coupling for Sink/WHB of standard size complete all as specified and as directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) coloured (including two Nos fixing bolts incl PVC seat cover but excluding flushing cistern and flush pipe) complete including making good to floor with and including fixing of P or S trap, complete all as specified and as directed.

S & F in repairs Vitreous China squatting pan, `Orissa` pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern) complete all as specified and as directed

S&F in repairs PVC water closet seat cover white, closed pattern and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

Supply only PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S& F in repair 10 litre capacity PVC low level valve less syphonic action type flushing cistern, white, with inlet, ball valve, float and handle including brackets, and bends complete all as specified and as directed.

Repairs to PVC Flusing Cistern by replacing minor parts like flushing knob, float, screws, washers including connecting to existing water supply line and water closet pan complete. Note : Cost of minor parts shall be included in the quoted rate

S&F 25mm dia aluminum powder coated best quality curtain rails with fixing brackets in both ends complete all as specified and as directed.

S&F in repair decorative globes for curtain rails to be fixed at both end complete all as specified and as directed.

S&F in repairs stainless steel plate rack of size 900x 750 x 250 mm made of 1mm thick stainless steelcomplete all as specified and as directed.

S&F in repair 100 mm dia CP grating incl joints with solvent cement complete all as specified and directed.

S&F in repair soap dish, brass, chromium plated fixed to wall with brass chromium plated screw, complete all as specified and as directed.

S&F in repair 20 mm PVC float valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe, complete all as specified and as directed

Taking down Chowkats or frame with shutters [without taking off shutter from the frame] not exceeding 1.5 Sq.m each and removing to store complete all as specified and as directed.

Taking down Chowkats or frame with shutters [without taking off shutter from the frame] exceeding 1.5 Sq.m but not exceeding 4.00 Sq.m each and removing to store complete all as specified and as directed.

Taking down Shutters of any description n. exc 1 Sq.m each complete all as specified and as directed.

Taking down Shutters of any description exceeding 1.00 Sq.m but not exceeding 2.00 Sq.m each complete all as specified and as directed.

Refixing Shutters of any description in same opening exceeding 1.00 Sq.m but not exceeding 2.00 Sq.m each complete all as specified and as directed.

Resecuring (or) Easing and Adjusting without taking down shutters of any description and any size complete all as specified and as directed.

S&F Plain, solid, straight chowkats and frames of 2nd class hard wood, framed rebated on the solid rounded or chamfered put together with glue pinned at joints.

S & F 35 mm thick, second class hard wood, plain framed panelled shutters [any numbers of panels] with panels of timber flat on both side [feather edged] or of veneered particle board, medium density, wood particle board with commercial face veneers or ply wood complete all as specified and as directed.

S&F 30mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S & F second class hard wood 35 mm thick glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc divided in to squares with plain, chamfered or rounded, mitred and rebated sash bars fitted with cut and mitred beads for securing glass etc complete all as specified and as directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube in opeing, complete all as specified and as directed.

S & F 200 mm long Aluminium anodised barrel tower bolts of extruded sections complete all as specified and as directed.

S & F in repair 200 mm long Aluminium anodised barrel tower bolts of extruded sections complete all as specified and as directed.

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections

S&F in repair 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections

S & F Aluminium anodised Handle, of extruded section Fabricated Type of size 150mm long complete all as specified and as directed.

S & F in repairs Aluminium anodised Handle, of extruded section Fabricated Type of size 150mm long complete all as specified and as directed.

S&F Stainless steel butt hinges 100mm size medium weight complete all as specified and as directed.

S&F in repair Stainless steel butt hinges 100mm size medium weight complete all as specified and as directed.

S & F Floor Door Stopper of size 100 mm of aluminium alloy body and tongue, anodised all as specified and as directed.

S&F repair 300mm MS ordinary rat tail spring (Helical door spring) including roller and roller plate complete all as specified and as directed.

S&F Anodised Aluminium frames or shutters for doors, partitions, Windows and Ventilators and similar works with one or more rebates incl necessary fittings and fixture such as jointing cleats, glazing clips, rubber packings, screws, handles stainless steel adjustable friction stay hinges etc. as required fixed to aluminium frame complete all as specified. NOTE: (i) Unit rate quoted shall deemed to include cost of rubber beading, fittings such as handles, SS friction stay hinges and fixing of glass, wire cloth & Decogrill etc. (ii) Glass, wire cloth & grill to be measured and paid separately.

Supply only 4mm thick, Figured glass, pinhead type in squares n exc 0.5 sqm each pane.

Supply only anodised aluminium 'XPM' 1.50mm x 3.00mm size for mosquito proofing 22 gauge thick complete all as specified and as directed.

S&F in reapir 5.5mm thick sheet glass ordinary quality in aluminum joinery in squares of area exc 0.50 sqm in each pane including necessary adjustements, dismantling and re-securing all as specified

S&F in repair Aluminium anodised 'XPM' of size 3.00 x 1.5mm x 22 Gauge for mosquito proofing fixed to aluminum shutters including necessary adjustements, dismantling and re-securing all as specified

S&F in repair Aluminium anodised window and ventilator for replacement of unserviceable members in window, ventilators etc complete all as specified and as directed.

S & F anodized aluminum door seals of 32mm (overall size) with standard 1mm thick aluminum sections and bottom brush and provision of counter sunk holes for screws etc all as directed.

S&F in repair for 18 mm thick HDF high quality boardings one side pre laminated (white) and other side plain to receive decorative laminates as in kitchen cabinet /shelves /wardrobe /wall panelling fixing with necessary small fitting as required as per manufacturers instructions complete all as specified and directed

S&F in repair heavy duty stainless steel Telescopic channels for sliding arrangement of size 20" for drawars, cabinets and similar works with carying capacity not less than 10 kg all as specified and directed

S&F Stainless steel auto closing heavy duty modular hinges for cupboard shutters complete all as specified and as directed.

S&F in repairs using plywood, grade BWP, type BB 12mm thick 7 No of ply fixed with nails to timber frames as in pelmet boxes and similar works etc complete all as specified and as directed.

M&L Decorative laminate 0.9mm thickness type 1,of surface finish,colour and pattern as approved, fixed with approved adhesive as per manufactures instructions.

S&F 100mm Extruded brass handles, fabricated type polished complete all as specified and as directed.

S & F 75mm Butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed complete all as specified and as directed.

S & F Ball catches/Magnet catcher with 8mm dia steelball, and brass body and striking plate including letting in and fixed with screws complete all as specified and as directed.

Minor repair to aluminum joinery and making serviceable the same by means of adjustment, greacing as necessary etc all as specified and directed

S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in treanches incuding necessary clamps etc to fixing on walls as required all as specified.

S&F in repair 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in treanches incuding necessary clamps etc to fixing on walls as required all as specified.

S&F 110 mm bore PVC (SWR) bends of any radius complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) bends of any radius complete all as specified and as directed.

S&F in repairs PVC (SWR) floor trap of any dia, plain with grating including jointing with solvent cement fixed in cement concrete all as specified and directed Note : Cement concrete shall be measured and paid seperately.

S&F in reapir for 500 Litres rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including tank cover and dismantling complete all as specified and as directed.

S&F in repair 1000 Litres rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including dismantling complete all as specified and as directed.

Grinding & polishing of existing Kota stone flooring by mechanical means by using beewax polish and removing all organic particles, oil/grease & similar items to bring the surface clean and smooth complete all as specified and as directed.

M&L for texture painting with complete preparation of surface making even with any means and applying a base coat over a coat of primer and then painting the surface with a final coat of of high quality glossy plastic oil emulsion with texture complete all as specified and as directed.

S&F in repair Vitreous China urinals, half stall type complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, pointing around urinal back in cement, including waste pipe and CP urinal spreader complete all as specified

Taking down scrubs/vegitation growth from crevices completely upto any height with all safety equipments all as specified and directed

KRISHNA TRADING COMPANY

Allied Trading Company

GAYATRI ENTERPRISES

Kathir Marketing Services