Loading…
Loading…
Tender Value
₹62.5 L
EMD Value
₹1.2 L
Closing Date
5 Sept 2024, 11:00 pmClosed
Directorate of Municipal Administration
R B GADAD
8951935799
Construction of compund wall in solid waste management site in the limits of machhe TP
DMA/2024-25/OW/WORK_INDENT25026
DMA/2024-25/OW/WORK_INDENT25026
Open
Other Works
Two Tender Document System(Two Cover)
DMA Town Panchayat Machhe
6 documents required · 6 mandatory
Tenderer in his name should have in the last five years i.e., 2019-20 to 2023-24, satisfactorily completed, at least one similar Work of Value not less than Rs.31.24Lakhs as Prime Contractor.Work done Certificate issued by the officer not below the rank of Executive Engineer or Equivalent
The tenderer should have executed the following minimum quantities of work in any one year of last fiveyearsie2019-20 to 2023-241)Earthwork/Embankment348.48 Cum 2)CementConcrete121.51 Cum3)SSM295.90Cum4)BBM134.46Cum 5)Panting/plastering1646.16sqm6)TMTsteel3.22Tonne7)Structural Steeel1056.72 Kg8)GI Wire792.00M Work done Certificate issued by the officer not below the rank of Executive Engineer or Equivalent
Contractor Registration Certificate.
Liquid assets and /or availability of credit facilities of not less than amount Rs.18.74lakhs (Credit lines/ letter of credit/ Banker certificates from scheduled banks for meeting the fund requirement etc.
The contractor should Inspect the Site Before Submitting Tender and relevant document of site inspection duly signed by the Junior Engineer of TP MACHHE to be uploaded
Tenderer in his name should have in the last five years i.e., 2019-20 to 2023-24, achieved in at least two financial years a minimum annual financial turnover (in all classes of civil engineering construction works only) of Rs.124.94 lakhs(UDINnumber is mandatory)
NIL
NIL
NIL
NIL
NIL
NIL
NIL
NIL
NIL
NIL
NIL
₹1,570
₹1.2 L
10 Aug 2024
10 Aug 2024
7 Sept 2024
5 Sept 2024
Construction of compund wall in solid waste management site in the limits of machhe TP
Earth work excavation by manual means for drains, canals, waste weir, draft, approach hannels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dra...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)PWD Common SR 2023-24 VOl.2(Page No.9, I.No.5.2)
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) PWD Common SR 2023-24 VOl.2(Page No.9, I.No.5.4)
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and
sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) in...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggr...
Form Work: As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate For Foundation upto Plinth All other types Form...
Form Work: As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate For RCC Columns / Shaft (Slip Centering) Form Wo...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/welding joints, tying...
Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, prov...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end
post and corner post shall be strutted on both sides an...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW-2_25026.doc
Tender Document • 1.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].