Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹49.3 LAccepted-AOC | L1 | Accepted-AOC Award of Contract due to lowest bid value | |
| 2 | L2₹50.6 L+₹79,489.90 (1.60%)Rejected-Finance | L2 | Rejected-Finance REJECTED BIDDER DUE TO HIGH BID VALUE | |
| 3 | L3₹52.4 L+₹2.7 L (5.37%)Rejected-Finance | L3 | Rejected-Finance REJECTED BIDDER DUE TO HIGH BID VALUE | |
| 4 | L4₹53.9 L+₹4.1 L (8.27%)Rejected-Finance | L4 | Rejected-Finance REJECTED BIDDER DUE TO HIGH BID VALUE | |
| 5 | L5₹54.7 L+₹4.9 L (9.86%)Rejected-Finance | L5 | Rejected-Finance REJECTED BIDDER DUE TO HIGH BID VALUE |
Tender Value
₹47 L
EMD Value
₹94,000
Closing Date
11 Jun 2022, 6:55 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
LT COL VASEEM HIROLI
GE/859/EWS TENGA VLY
AS ABOVE
2022_MES_526120_1
T/8328/E8/22-23
Open Tender
Civil Works
Item Rate
180 days
DAGUNG
7 documents required · 7 mandatory
₹500
GE 859 EWS
₹94,000
Yes
23 Jun 2022
24 May 2022
13 Jun 2022
24 May 2022
11 Jun 2022
6 Jun 2022
Amount
Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth and getting out in hard / dense soil for laying of cable / errection of poles / stay assembly etc complete all as specified and directed.
All as per item No. 1.00 above but depth exceeding 1.5 m and not exceeding 3 m complete all as specified and directed.
Returning filling in trenches including spreading, leveling, watering and well ramming in layers n . Exc 25 cm complete all as specified and directed.
Removing surplus soil to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and directed.
M&L for PCC (1:3:6) type C-2 using 40mm graded aggregate as in foundation for filling in, mass concrete for foundation of Pole, stay assembly, repairs to road cutting etc complete all as specified and directed.
M&L for PCC (1:2:4) type B-1 using 20mm graded aggregate as in coping of new pole / reconstruction old damaged copings etc, including necessary form work complete all as specified and directed
Dismentling /taking out carefully old/unserviceable UG cable any type any size from trenches/poles/ducts/LT panels after dismentling ends from OH conductors/MCCBs/Joint boxes for relaying/refixing or carrying to store for Sch of Credit.
Material and labour for fixing or passing through pipe, laid in trenches or fixed to pole/wall or fixed to LT panel board, 1100 volts grade heavy duty cable with PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall PVC sheathed 50 Sqmm 3.5 core with required aluminium cable lugs all as specified and directed.
All as per item No. 8.00 here-in-before but 70 Sqmm 3.5 core complete all as specified and directed.
All as per item No. 8.00 here-in-before but 95 Sqmm 3.5 core complete all as specified and directed.
Supply and spreading clean dry river sand in trenches for cushioning of UG cables complete all as specified and directed.
Supply and laying in replacement un-reinforced precast concerete cable cover, class LV, type 1 flat size 250mm x150mm x 40mm for cable protection complete all as specified and directed.
Dismentling taking out broken/worn out steel pole of 8.5 to 9.0 mtr long and kepping aside for refixing or carrying to store for credit
M&L for steel tubular swaged pole complete with cast iron base plate , finial taper plug bolts nuts and screws confirming to IS : 2713 and made out of structural steel tube confirming to IS: 1161 and painted internally with a coat of bituminous paint and externally one primer coat, one under coat and one finishing coat of aluminium paint as specified type 410 SP-31 (9 Mtr long).
Dimentling and taking down old/unsv insulator of any type any size from pole/stay complete all as specified and directed.
S&F pin type, porcelain, vitreous, brown, including one galvanised mild steel spindle, two galvanised iron washer and one galvanised iron nut, 100mm height and 65 mm dia for 1100 volts grade all as specified and directed.
S&F 1100 volts grade heavy duty flat twin core cable PVC insulated with stranded aluminium conductor of size 10 sqmm and overall PVC sheathed in service connections incl dismentling taking down unserviceable one all as specified and directed.
S&F 1100 volts grade heavy duty flat twin core cable PVC insulated with stranded aluminium conductor of size 16 sqmm and overall PVC sheathed in service connections incl dismentling taking down unserviceable one all as specified and directed.
S&F MCCB 250 Amps 4 Pole, 36 KA, 415 V, 50 Hz and connecting up in the existing panel location including taking out existing unserviceable MCCB complete all as specified and as directed by Engineer-in-Charge.
All as per item No 19 here in before but MCCB 200 Amps 4 Pole, 36 KA, 415 V, 50 Hz complete all as specified and directed.
All as per item No 19 here in before but MCCB 100 Amps 4 Pole, 36 KA, 415 V, 50 Hz complete all as specified and directed.
M&L for trimming of branches of trees touching LT electric over head line and making clear about 3 mtr in radius by climbing up tree or by providing ladder, at a height 7 mtr and above and carrying and depositing where directed not exceeding 50 mtr.
Dismentling taking down carefully flood/stree/gate light fitting any type any make any capacity from pole, gate pillar or wall complete all as specified and directed.
S&F LED Street light fitting 25 Watt new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 road luminaire with high power LEDs as light source and electronic driver.
S&F LED Street light fitting 45 Watt new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 road luminaire with high power LEDs as light source and electronic driver.
S&F LED Street light fitting 60 Watt new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 road luminaire with high power LEDs as light source and electronic driver.
S&F energy saving environmental friendly, long life exclusive innovative die-cast aluminium IP-66 LED flood light of 60 Watt 5700K with high power LED as light source source complete all as specified and directed.
S&F energy saving environmental friendly, long life exclusive innovative die-cast aluminium IP-66 LED flood light of 180 Watt 5700K with high power LED as light source source complete all as specified and directed.
S&F Street light junction box of size 200mm x 140mm x 95mm outdoor type, weather proof, factory made out of PVC sheet 1.8mm thick with front side hinged opening having locking arrangement with nuts & bolts & arrangement for incoming and out going cable/wire complete comprising with the followings :- (a) Bus bar with two aluminium strips, 63 Amps capacity insulated with insulators, including colour coding, including PVC cable of suitable size from bus bar to MCB (b) MCB SPN 5 to 30 Amps - 01 No (c) Clamps made out of 25mm x 3mm flat iron duly weldedwith nuts & bolts incl dismentling taking down unsv complete all as specified and directed.
S&F On load change over switch, four pole with advance neutral 63 Amps, 415 V, 50 Hz conforming to IS : 13947 Part-3 connecting up in separate SS enclosure including taking out existing unserviceable change over switch complete all as specified and directed by Engineer-in-charge.
S&F On load change over switch, four pole with advance neutral 200 Amps, 415 V, 50 Hz conforming to IS : 13947 Part-3 connecting up in separate SS enclosure including taking out existing unserviceable change over switch complete all as specified and directed by Engineer-in-charge.
Supply only distilled water
S&F for replacement of battary 12 V Low maintenance lead acid suitable for solar street light having minimum backup of 3 days Make : Exide/Amaron or equivalent of approved make.
S&F Heating element 3/2 KW for electrical backup with rubber washers suitable for solar water heater 1000/500/100 LPD incl dismentling taking down unsv one all as specified and directed.
Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth and getting out in soft/ disintegrated rocks complete all as specified and directed.
S&F GI tubing medium grade, ISI Marked conforming to IS 1239 Part-I 2004, 20mm bore with and including all fittings such as bends, elbows, tees, short length, socket, union, check nuts, nipples etc. fixed and laid in trenches/floor/under culvert/road crossing etc, fixed as in repair including dismentling taking down old unserviceable one complete all as specified and directed. (Note: Exacavation and earhwork shall be measured and paid for separately.)
All as per Item no 37 here-in-before but of size 25mm bore ditto.
All as per Item no 37 here-in-before but of size 40mm bore ditto.
All as per Item no 37 here-in-before but of size 50mm bore ditto.
All as per Item no 37 here-in-before but of size 80mm bore ditto.
S&F 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV 90mm outer diameter stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random complete fittings as per site requirement fixed and laid in trenches/floor/under culvert/road crossing etc, fixed as in repair including dismantling taking down old unserviceable one complete all as specified and directed. (Note: Excavation and earthwork shall be measured and paid for separately.)
All as per Item no 42 here-in-before but of size 110mm bore ditto.
S&F in repair PP-R gate valve heavy duty suitable for 90mm outer bore PPR pipe with iron wheel head screwed both end as per site requirement.
S&F in repair PP-R gate valve heavy duty suitable for 110mm outer bore PPR pipe with iron wheel head screwed both end as per site requirement.
S&F Bronze gate valve for 15mm bore pipe, with iron wheel head, screwed both ends for iron pipe and fixed, ISI marked conforming to IS 778 : 1984, fixed as in repair including dismantling taking down old unserviceable one complete all as specified and directed.
All as per Item no 46 here-in-before but of size 20mm bore ditto.
All as per Item no 46 here-in-before but of size 25mm bore ditto.
All as per Item no 46 here-in-before but of size 40mm bore ditto.
All as per Item no 46 here-in-before but of size 50mm bore ditto.
S&F cast iron air release valve, nominal size DN-150mm, strandard type heavy duty suitable for PN-1.6 pressure water pipe line including suitable size joints and jointing material, fixed as in repair including dismantling taking down old unserviceable one complete all as specified and directed.
Supply and fixing cast iron Sluice valve PN 1:6 as per IS-14846, body, dome, wedge-CI IS:210, rings bronze IS:318, Spindle-SS IS-6603, Gland Packing gresy jute packing, fasteners-CS, Gasket-Natural rubber, Nominal size DN-150mm, both ends flanged in existing line without damaging to existing pipe line, fixed as in repair including dismentling taking down old unserviceable one complete all as specified and directed by Engineer-in-charge. Note :- Suitable size flanges for existing pipe line, joints and jointing material shall be included under this item.
All as per Item no 52 here-in-before but of size 100mm bore ditto.
All as per Item no 52 here-in-before but of size 80mm bore ditto.
Supplying, fixing and testing of cast iron swing check non return valve PN 1.6 as per IS 5312 part I,body, dome, wedge - CI, IS 210, rings bronze,IS:318, Door - CI IS:210, Door face - natural rubber Gland packing gresy jute packing, fasterner,CS, gasket - Natural rubber, nominal size DN - 150 mm both ends flanged complete all as specified and as directed. Note-: Suitable size flange, joints and jointing materials shall be included under this item.
All as per Item no 55 here-in-before but of size 80mm bore ditto.
Taking out old unserviceable with replacement of ball bearing 7311-BECBP, complete all as speciified and as directed. Make: SKF/ NBC
Supplying, fixing and testing of Foot Valve PN 1.6 as per IS 5312 part I, nominal size DN - 150 mm single end flanged complete all as specified and as directed. Note-: Suitable size flange, joints and jointing materials shall be included under this item.
All as per Item no 58 here-in-before but of size 100mm bore ditto.
M&L for PCC (1:3:6) type C1 (using 20 mm graded crushed stone aggregate) as in concrete pedestal for supporting the CI/GI pipes including necessary form work including demolition of existing pedestal complete all as specified and directed.
M/S SUNRISE CONSTRUCTION AND CO
M/S YOGENDRA CONSTRUCTION CO
M/S RARAI ENTERPRISES
M/S MURPHEW ENTERPRISES
M/S G JEBISOW ENTERPRISE
D.P. Traders
M/S DK TRADERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .