Repair/Renovation and Upgradation of VIP Bathroom of PWD Rest House Dinga Amb.

Amount

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. metres and under incl. cutting the patch in proper shape ranking out joints & preparing & plastering the surface of the walls complete incl. disposal of rubbish to the dumping ground in cement mortar 1:4 (1 cement : 4 fine sand) incl.all leads & lifts.

Dismantling doors, windows and clerestory windows of area 3 sqm and below (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking ,all leads & lifts.

Demolish ing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material all leads & lifts. In cement mortar

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering including all leads, lifts and carriage of material by MT / H.L. All work upto plinth level.1 : 5 : 10 (1 cement : 5 coarse sand : 10 graded crushed stone agg. 40 mm nominal size) .

Providing and laying damp proof course 50 mm thick with cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20 mm nominal size) including all leads, lifts and carriage of material by MT / H.L.

Brick work with F.P.S. bricks of class designation 75 in foundation and plinth including all shapes, leads, lifts and carriage of material by MT / H.L. in cement mortar 1:6 ( 1 cement : 6 coarse sand)

15mm cement plaster on rough side of single or half brick wall of mix 1 : 6 ( 1 cement : 6 fine sand) including drip course/groove all leads, lifts and carriage of material by MT / H.L.

Providing and fixing Ist quality ceramic glazed tiles conforming to IS : 13753 of minimum thickness 5mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Engineer-In-Charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. incl. all leads, lifts and carriage of material by MT / H.L.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% & confirming to IS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1 :4 (1 cement : 4 coarse sand) including grouting the joints with white cement & matching pigments etc. complete Size of tile 60cm x 60cm incl. all leads, lifts and carriage of material by MT / H.L.

Regarding terracing of mud phaska covered with tiles or bricks, in cement by dismantling tiles or bricks, removing mud plaster preparing the surface of mud phaska to proper slope, relaying plaster gobri leaping & tiles or bricks grouted in cement mortar 1 : 3 ( 1 cement: 3 fine sand) incl. replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground ( the cost of the new tiles or brick excluded) incl. all leads and lifts.

Providing wood work in frames of Sal wood in doors, windows, clerestory windows and other frames wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately)

Providing and fixing 35mm thick panelled or panelled and glazed shutters of Second class deodar wood for door, windows and clerestory windows including ISI marked black enameled M.S.butt Hinges with necessary screws including Panelling of Particle Board 12mm thick Plain particle board flat pressed, 3 layer (like Novapan, Ecoboard etc)or graded wood particle board (like Bhuttan Board) medium density grade 1, IS : 3087 marked

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick , Particle Board 12 mm thick plain particle board flat pressed, three layer or graded wood particle board medium density grade IS: 3087 marked.

Providing and fixing 30 mm thick wire gauze shutters using galvanised M.S. wire gauze .of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows:lSI marked M.S. pressed but hinges bright finished butt hinges of required size with necessary screws: Second class deodar wood

Providing and fixing 30 mm thick glazed shutters for doors, windows and clerestory windows using 10kg/sqm (4mm thick) float of glass panes including lSI marked M.S. pressed butt·hinges bright finished of required size with necessary screws.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth incl. necessary repairs to scratches etc. complete.

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work ( hard and soft wood)

Providing and applying White Cement based Putty of average thickness 2 mm of approved brand & manufacture, over the plastered wall surface to prepare the surface even & smooth complete.

Wall painting with plastic emulsion paint of approved brand and manufature to give an even shade. Two or more coats on new work.

Finishing walls with acrylic smooth exterior paint of required shade on New work (two or more coats applied @ 1.67 litre/10sqm over and including base Coat of water proofing cement paint applied @ 2.20kg/10sqm)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work.

Painting with ready mixed synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new steel work.

Providing and fixing wall hanging water closet with concealed system of make Jaquar, Hindware etc.(complete job)

Providing & fixing G.I. pipes complete with G.I. fitting and clamps including cutting and making good the walls etc.Internal Work-Exposed on wall

15mm nominal bore Medium

20mm nominal bore Medium

Providing and fixing wash basin White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps with C.I/M.S. brackets,15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:

Providing & fixing white vitreous china pedestal type Water closet ( European type W.C. pan ) with seat and lid,10 litre low level white P.V.C flushing cistern including flush pipe with manually controlled device( handle lever) conforming to IS : 7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever required. W.C pan with ISI marked white solid plastic seat and lid including all leads, lifts and carriage of material by MT / H.L.

Providing and fixing 110 mm dia PVC waste water/sewerage pipe of 4 kg pressure per sqm of Supreme/ Prince/finolex make.

Providing & fixing unplasticised PVC connection pipe with brass unions30 cm length 15 mm nominal bore

Providing and fixing C.P brass bib cock of approved quality conforming to IS: 8931. 15 mm nominal bore complete job.

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms 15 mm dia nominal bore

Providing & fixing ball valve brass of approved quailty high or low pressure with plastic floats 15mm nominal bore

Providing and fixing PTMT soap dish holder having length of 138mm, breadth 1 02mm, heigth of 75mm with concealed fitting arrangements, weighing not less than 106 gms complete job.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality & colour:600 mm long towel rail with total length of 645 mm, 78 mm wide & effective height of 88 mm, weighing not less than 190gms.

Providing and fixing mirror of superior glass( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm

Removal of unhygenic materials (so classified by the site engineer) from designated sites and its disposal as per directions, all inclusives

Renewing glass panes, with wooden fillets wherever necessary: glass panes weighing 10 kg/sqm.

JIA LAL

BISHVJEET SINGH JAMWAL

KISHORI LAL