PROVISION OF DEFICIENT OFFICERS MD ACCN TYPE IV SPECIAL AT COAST GUARD RESIDENTIAL AREA PANCHU TIKREY HUTBAY

Amount

GENERAL SUMMARY NOTE: Schedule ‘A’ Part I to XI are prepriced by MES under Ser No. 2.00 to 11.00. Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 ONLY

Lumpsum price worked out by the contractor for "Building / Structures” as listed in Schedule ‘A’ Part - I, inserted by MES

Lumpsum price worked out by the tenderer for "Site clearance, Earth works and Land devlopment as listed in Schedule ‘A’ Part-II

Lumpsum price worked out by the tenderer for "Internal Water Supply" as listed in Schedule ‘A’ Part-III

Lumpsum price worked out by the tenderer for "Internal Electrification" as listed in Schedule ‘A’ Part-IV

Lumpsum price worked out by the tenderer for "Retaining Wall" as listed in Schedule ‘A’ Part-V

Lumpsum price worked out by the tenderer for "Road,Path and Culverts" as listed in Schedule 'A' Part-VI

Lumpsum price worked out by the tenderer for "Sewage Disposal " as listed in Schedule ‘A’ Part-VII

Lumpsum price worked out by the tenderer for "Security wall, Fencing and Gate " as listed in Schedule ‘A’ Part-VIII

Lumpsum price worked out by the tenderer for "External Water Supply " as listed in Schedule ‘A’ Part-IX

Lumpsum price worked out by the tenderer for "External Electric Supply " as listed in Schedule ‘A’ Part-X

Lumpsum price worked out by the tenderer for "Area Drainage" as listed in Schedule ‘A’ Part-XI

Subtotal

SCH 'A' PART XII MISCELLANEOUS ITEMS NOTE: Schedule ‘A’ Part - XII is not prepriced by MES and prepriced rate indicated as 0.00 under Col.5 signifies this fact only. Bidder shall insert their rates in Green colour filled under Col-6.

M&L for Construction of masonry valve chamber of size 600X600X600 mm internal size, 100 mm thick foundation using PCC 1:4:8, type D-2, over 15cm thick hard core, 20cm thick solid block masonry with blocks cast using PCC 1:3:6, type C-1, set in cement mortar 1:4, 15MM thick plaster to internal surfaces and external surfaces up to 15cm below ground level and top of floor in cement and sand mortar 1:4, finished even and smooth with out using extra cement , 3.15mm thick MS sheet cover including 50mmX50mmX6mm thick MS angle frame fixed in PCC 1:2:4, type B1 coping with 25mmX6mm flat iron hold fasts, handle, hinges with locking arrangements, applying one coat of red oxide primer and two coats of synthetic enamel paint to all steel surfaces and earth work in any type of soil including disposal of surplus soil to a distance not exceeding 50M complete all as specified and directed

M & L for making conection of PP-R distribution branch by providing and fixing PP-R tee 50 x 50 x50 mm including cutting,jointing and making functional joint etccomplete all as specified and directed.

M&L for cutting existing road/hard standing not exc 45x60 cm in wide & depth getting out excavated material for laying GI tube ;returning filling & well rammaing watering finish suraface 15 cm from top using PCC 1:3:6; including removal of surplase soil all as directed

S&F PVC coated Mild steel angles, flats, etc (PVC Coated not less than 7mm thick) as in supports for posts,struts,in fencing incl cutting tops to shape as directed, drilling holes, notching for wire, flat iron fillets, (for securing wire mesh) including all necessary drilling bolting and similar work conferming to Fe 290 Gde E-165 complete all as spd and directed.

S&F PVC coated mild steel round bars,10mm dia (PVC coating not less than, 70mm thick) as in straining bars confirming to Gde-I IS-432,cut to length, bent to shape required and fixing all as specified and directed.

Supply only PVC coated GI chain link mesh of size 50 x 50mm 3.6 mm dia GI wire with 1mm thick PVC coating and weight not less than 3.3 Kg/Sqm. Complete all as specified.

Supply and fix ceiling fan, 5 star rating, energy efficient BLDC (Brushless Direct Current) motor with regulator and smart remote controlled suitable for convert from 230 V AC to 24 V DC , 1200MM sweep, 28W power, down rod and canopy rating and the colour of milky white including anchor flusher,ceiling hook for fixing of fan on ceiling complete all as specified and directed by engineer-in-charge

Supply ,Install and test electric water heater (Geyser) vertical storage type of capacity 25 ltrs to work on single phase, 230 volts, 50 HZ, including provision of bolts, nuts, washers and grouting on walls and making good the disturbed portion to match with the existing surface and provision of suitable PVC pipe connection hot and cold connection with chromium plated brass check nuts incoming and out going and one no non return valve complete as all specified and directed.

S&F angular stop cock cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron/cpvc pipe or for union and fixed for 16mm bore of pipe with long shank and cup

Supply & Fix 2 in 1 Bib tap cast copper alloy, chormium plated, with crutch or butterfly handle, screwed down, high pressure, screwed for iron/cpvc pipe and fixed suitable for 16 mm bore cpvc pipe all as specified

Supply & fix CP health faucet 15mm dia with all fittings complete all as specified and as directed

Supply and fix pillar tap long neck with aerator for sink of 16mm dia as approved complete all as specified and as directed.

S& F single phase key based BIS marked liberty static energy meter tamper proof electronic Ac 240V, 50Hz with LCD display with polycarbonate cover, accuracy class-I 50 Hz, unit of current rating range 05-30 A measures confirming to IS 13779, IP-54 with parameters to show data, time, current reading, load, PF, voltage and KWH including internal wiring using PVC cable copper conductor so size 2.5 Sqmm and necessary testing commission etc with the following:- (a) Supply and installed vending soft wire-liberty on line with 2 Nos Vasco Key. (b) Supply and installed tariff designing customer data based definition, liberty on line. (c) Including maintenance of one years after date of completion of the work.

S&F PVC Exhaust fans 225 mm sweep single phase 230 Volt 50Hz heavy duty 1400rpm energy efficient smooth functioning with suitable size of louver including fixing arrangement opening of whole all as directed by Engineer-in-Charge.

Supply and fix LED type light fittings 4 feet long 1x20 W 230V, decorative ultra slim square profile liner LED lighting fixture with extruded polycarbonate environmental friendly, energy tube light life time 40,000 burning Hrs, lumen output 2000lm, colour temp-6000K, Surge protection of 2KV with voltage protection 160-360V, power factor >0.9 complete & prewired for LED tube complete fixed to wall/ceiling, PVC round blocks and connection by flexible PVC cable with stranded copper conductor from ceiling rose to connector of the fitting including 1x20W LED tube complete all as specified.

Supply and fix indoor wall mounting mirror light fitting 12watt, 2’, in build electrical protections like overvoltage, short circuit and over load including drive with high efficiency and low power loss excellent with high transmittance efficiency.

Supply and fix LED 18W, slim design profile surface/ceiling mounted down light with options of 700 to 2000 lumen suitable for spaces like Varandha/Bolcony/Passage, Energy efficient fitting decorative type complete including housing all pre wired with high efficiency electronic driver complete fix to wall /ceiling including connection by flexible PVC cable with stranded copper conductor including LED tube complete all as specified.

S&F LED (Bipin holder type) 10watts compete all as directed.

S&F Energy saving and environmental friendly long life LED 19 Watt bldg. security light made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP66 protection including all fixing arrangement brackets nut bolt washer and connected form ceiling rose with tri colour flexible copper cable all as directed.

Subtotal

ASHOK BISWAS

P NAIDU

N Rathinam