ADDITION/ALTERATION TO BLDG NO P-14 OF MB AREA PRO UNIT AND SPL REPAIR/REPLACEMENT OF INTERNAL WIRING, LIGHT FITTING, FIXTURES AND ALLIED WORKS OF P-167,P-314, P-315 AND P-326 OF GROVER ENCLAVE UNDER GE (W) JABALPUR

Amount

Taking down cement plaster on brick/ stone masonary including raking out joints, hacking for scrubbing down with water etc. complete all as specified and as directed.

Dismantling of wall and ceiling boards( fibre pulp insulation etc) any thickness including cover fillets all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 sq.m but not exc. 4 sq.m each complete all as specified and directed.

Dismantling of timber scantlings unframed 40Sq Cm and over in section, in any position complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Demolition of concrete of any description and in any position complete all as specified and directed.

Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing ) removing rubbish etc complete all as specified and directed.

Dismantling of Asbestos cement (corrugated, semi corrugated,etc) sheets in roof covering complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed..

M&L for suspended false ceiling system using chicago metallic (E grid) exposed supended system, grid section size 600mm X 600mm comprising of GI powder coated Main Runner of dimensions 39 mm X 24mm X 0.8mm thick (thickness comprising of GI/0.4+ PPPCGS/0.3mm & weight of runner 1.35 kg for 3600mm length) Cross Tee of dimensions 29mm X24mmX0.8mm thick and thick wall angle 22.2mmX22.2mmX 0.65 mm thick ( thickness comprising of GI/0.35+ PPPCGS/0.3mm & weight of angle 0.70 kg for 3050mm length) with and including 4mm thick HPSC(High pressure steam cured) pre-primed , self embossed . textured designer board, water resistant termite resistant , fire resistant for insulation and acoustic purpose to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins of the roof with butterfly clips(Wt-0.007 Kg/clip)hold down clips (Wt-0.0035 Kg/clip) with Provn of light fixture complete all as specified and directed.

M&L for 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface, cornices and raised mouldings over metal frame work and reinforced with G.I. wire mesh including metal frame work for false ceiling complete all as specified and directed.

S&F factory made steel windows with side hung shutter including box type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded confirming to Fe 290 Gde E-165 etc all as specified and directed.

S&F, factory made steel windows with side hung shutter including box type hinges with steel handle and steel peg stay, complete without glazing bars, dovetailed or welded confirming to Fe 290 Gde E-165 etc complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L for 3mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc. 0.5 sq.m in each pane complete all as specified and directed.

S&F structural steel work as in tubular trusses incl special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 grade St-240 complete all as specified and directed.

M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming Fe 410 -W (GdeE- 250) qualityA complete all as specified and directed.

M&L for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming Fe 410 -W (GdeE- 250) qualityA complete all as specified and directed.

M&L for Vitriefied ceramic tiles 10mm thick DARK SHADE(square/rectangular) polished area of each tiles not exceeding 0.36 sqm including 15mm thick screed bedding layer in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile complete all as specified (Make: Premium quality of Kajaria or equivalent quality approved by GE).

S&F machine cut kota stone slab flooring 20-25mm thick over & including cement Screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed.

S&F machine cut kota stone slab flooring 20-25mm thick as in riser of steps, skirting, dado and pillar laid over and including 10mm thick cement screed in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed (Make : Tata blue star or equivalent).

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for flat surfaced formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter rough finished surfaced complete all as specified and directed.

M&L for mild steel work as in wind ties for roof including securing bolts; drilling holes, notching for wire, etc complete all as directed.

M&L for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, 5 to 10 mm dia & exc 5cm but n.exc 10cm long complete all as specified and directed.

M&L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in Cement mortar 1:4 complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on brick work or concrete surface in CM 1:4 finished fair& even surface complete all as specified and directed. (WPC paid separately )

Supply only liquid water proofing compound ISI marked.

M&L for Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over 2mm thick external wall care putty over a coat of alkali resistant priming paint complete all as specified and directed.

M&L for Preparation of newly plastered surfaces of walls and applying two coats of oil emulsion distemper over 2mm thick of birla wall care putty over a coat of primer (chalk whitening) complete all as specified.

M&L for complete removal of existing treatment of old decorated surfaces of walls and applying two coat of oil bound distemper over 2mm thick of birla wall care putty over a coat of chalk whitining on walls complete all as specified and directed.

M&L for preparation of old plastered surfaces of wall and applying two coats of cement base paint over a coat of white cement as primer complete all as specified and directed.

M&L for prepration of New or previously untreated surfaces of steel of any description, over 10cm in width or grith, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide complete all as directed.

M&L for flat surfaced formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter rough finished surfaced complete all as specified and directed.

Taking down carefully any type point wiring (light, fan, socket bell or power) , complete with fitting such as switches ceiling roses,lamp holders sockets,regulators,call bell light fitting with PVC conduit surface /concealed or wooden pattens including sunken cast iron /pressed steel terminal boxes etc and making good the disturbed surfaces of walls, roof, floors etc to match with the existing surfaces all as specified and directed by Engineer in charge.

Taking down the ceiling fan in situ and refixing after servicing, repairing and painting to ceiling fan including scratching old paint and preparation of surface for painting with one coat of white/grey enameled paint complete all as specified and directed.

M&L for point wiring with 1.5 Sq mm single core PVC insulated unsheathed copper FRLSH multi stranded conductor cable in and including Concealed PVC conduit of size 20/25mm ISI marked inclusive of tees ,bend ,elbows etc upto and including sunk in Anodized pressed steel box for housing switch socket etc with white laminated 3 mm thick sheet cover ISI marked of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sq mm FRLSH cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal incl cutting, chasses and making good disturbed surface to match with existing finish with plaster for complete all as specified and directed by Engr-in-charge (a) One light/ exhaust fan/ fan point/ bell point controlled by one, one way switch 5 Amps

(b) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

(c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

Description all as per above item but with 1100 volts grade copper standard conductor cable of size 2.5 Sqmm with 2.5 Sqmm solid copper conductor PVC for 3 pin switch socket outlet 15 Amp independent board complete all as specified and directed by Engineer in charge .

S&F switch socket combination multipin 5 and 16 Amps AC 230 volts flush type complete all as specified and directed by Engineer in charge

S & F bell ding dong AC 230 volts single pole one way complete all as specified and directed by Engineer in charge.

S & F bell push piano flush type AC 230 volts 5 Amps single pole one way complete all as specified and directed by Engineer in charge.

S & F Switch Piano type single pole 5 amp, 230 Volts complete all as specified and directed at site. Make : Anchor or equivalent

S & F socket outlet 2 in 1 , 5 pin, 5 amp, 230 Volts complete all as specified and directed at site. Make : Anchor or equivalent

S & F Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified.

S&F fan regulator step type capacity of polycarbonite complete all as specified and directed by Engineer in charge.

Supply & Fixing in repairs Smart bright Batten Series, LED luminaire using LEDs 22 watt 110 LM/watt with diffuser which ensures uniform distribution and comfort batten series features latest LEDs and delivers consistent light output, stable color start Extruded Aluminum housing, Energy efficient, Flicker free start Inbuilt driver unit Suitable for wall and ceiling mounting using brackets complete all as specified and as directed.Make : Philips Cat part BN 021 LED 22S 6500 PSU GR SI or equivalent

Supply and fixing in replacement of decorative wall light fitting WITH LAMPS 9 WATT made up of Polycarbonate , City-1 , Cylindrical shape , with LED lamp 9 Watt complete with fixing arrangements on wall all as specified and directed. Make: Havells/Wipro/Bajaj.

S & F in repair of LED Decorative /mirror light fitting 9 watt along with fixture Surface mounted suitable for indoor aplication , connector block, etc . Complete with all accessories internally pre-wired and including round wood block, connecting up with three core flexible flexible copper conductor cable suitable size complete all as specified and directed by Engineer in charge. Make: Philips/ Wipro/Bajaj.

Supply & fix in replacement of LED Security Light Luminaire 25 watt 6000K with .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens type,GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos of pole fitting clamps made out of MS flat , nuts and bolts and painting with aluminium paint. complete all as specified and as directed.Make:Havells cat part no: LHDAUU7PA7J025 or equivalent in philips or bajaj

S&F in repairs Sub Main Wiring two single core PVC insulated cable of size 6.0 Sqmm multistranded copper conductor two run drawing into and including concealed rigid non-metallic PVC conduit, medium grade not less than 25mm dia with all conduit fitting,fixing accessories and one run of 4.0 Sqmm multistrand copper conductor cable as continuous earth wire complete all as specified and directed by Engineer in charge Note :-Two Nos of 6.0 Sqmm Wire and one No of 4.0 Sqmm Earth wire in One RM length Measured as one unit length.

S&F in repairs Sub Main Wiring with Two single core PVC insulated cable of size 4 Sqmm multistranded copper conductor drawing into and including concealed rigid non-metallic PVC conduit, medium grade not less than 20mm dia with all conduit fitting,fixing accessories and 2.5 Sqmm multistrand copper conductor cable as continuous earth wire complete all as specified and directed by Engineer in charge Note :- Two Nos of 4.0 Sqmm Wire and One No of 2.5 Sqmm Earth wire in One RM length Measured as one unit length.

Supply & Fixing in repair single pole and netural sheet metal enclosure with a two pin and earth plug and socket complete with 01 number single pole MCB 20 Amps complete all as specified & directed.Make: legrand or eq

Supply and fixing Single phase wall mounted remote controlled fan heavy duty AC 230 volts 400 mm sweep, metallic body complete including electric connection with twin core copper wire for wall mounted fan, nut, clamp & bolt etc complete all as specified and as directed.Make: Bajaj,Havells or eq

Supply and fixing Single phase ceiling fan 1200 mm permanent magnet brushless DC Motor 230 v 50 Hz single phase 26-30watt rated current 0.16 amp,pf 0.98 370/360 rpm air delivery 220m3 rated service value 629m3/min/watt no of blades three type of blade leaf 1.05 mm thick aluminium sheet remote control radio frequency 5 speed +off timer option speed regulation class of insulation two nos bearings including connecting wire complete with all as required and directed at site by eng in charge Make : Havells/ CG/ Bajaj

S&F in repairs LED light fitting square 57x57 CM Not less than 40 watt along with fixture Surface / Recessed /Pendent mounting LED luminaries with diffuser channel Luminaires ers, connector block, etc . Complete with all accessories internally pre-wired and including round wood block, connecting up with three core flexible flexible copper conductor cable suitable size complete all as specified and directed by Engineer in charge. Make: Philips cat part no: RC375B LED 36S/840 PSU W60 L660 S2 WH or equiv in Bajaj/Havells

Supply & Fixing in repair sheet metal enclosure MCB DB double door [Acrylic], single pole and neutral, 240 volts, 8 way with 200 Amp, 10 KA breaking capacity rated bus bar with blanking plate wherever required and IP-43 degree protection complete all as specified & directed.. Make:Legrand cat part no:5076 21/siemens/GE

S & F in repair Sheet metal enclosure DBs Tripple Pole and Neutral 4- way with 200 Amps rated bus bar 240 volts complete double door complete all as specified and directed by Engineer in charge

S & F Exhaust fan heavy duty size sweep 300 mm sweep, 230 v, 50 Hz , complete with louvers including making holes and making good the disturbed surface complete all as specified and directed by Engineer in-charge. Make: Bajaj/havells/Usha

S & F in repair MCB TPN 415 volts 63 Amps, C Series complete all as specified and directed by Engineer in charge

S&F in replacement of sheet steel enclouser distribution boards, double door factory made VTPN 4 way 3 phase 415 volts 4 way with 200 amps rating copper bus bar and PVC insulated copper jumpers of suitable size from the MCCB to the out going circuits one incoming MCCB and 12 outgoing MCBs circuits comprising of 3 phase 4 wire of suitable rating complete all as spcd and directed with the following accessories :- (a) MCCB 100 amps, 16 KA, TP, 415 volts, 50 Hz = 01 No.Make:Legrand cat part no: 5077 45/siemens/GE

Supply , laying, testing and commissioning in repairs LT underground cable 1100 volts grade, XLPE insulated , 25 Sqmm 4 core screened, PVC sheathed Heavy duty armoured with multi stranded aluminium conductor laid in pipes, trenches/ducts, on poles and wall etc of undermentioned sizes complete all as specified and directed by Engineer in charge.make:Polycab /gloster or equivalent

S&F in repairs for GI Tubes,of size 40 mm dia light grade, galvanised, with all fitting , laid in trenches for protection of cable in road /drain crossing complete all as specified and as directed.

S & F MCB Single pole and neutral rated capacity 40 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.Make- Legrand/seimens/GE

S&F MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed..Make- Legrand/seimens/GE

S&F in repair Bulk head endura LED light fitting complete with10 watt LED and making necessary electric connection to ceiling rose with copper conductor of suitable size & length complete all as specified & directed. Make :Havells Cat Part No. HEXAFT10WLED857SSYMBOPC or Equivalent make Philips / BAJAJ

Supply and fixing electronic energy meter tamper proof design digital technology of SINGLE phase 1 x 240 volts 50 HZ 0.4% basic current for direct connected meter and 0.2% of basic current for CT operated meter with LCD display class-1 accuracy as per IS : 13779 Microprocessor based single phase energy meter of 10--60 Amp or available at site /store room of AGE E/S duly testing its serviceability at site complete including all connections with new FRLS wire of 4 Sqmm complete with fixing accessories on finished wooden box incl taking down old meter any type and deposited to MES Store yard all as specified & directed at site.

Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth , for foundation, etc or for shafts, wells, cesspits, manholes, pier holes,etc. n exc 10sqm on plan and n exc 1.5m in depth and getting out in any type of soil

Demolition of road/path /concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) .complete all as specified and as directed.

Returning , filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and as directed.

M&L for Sand cushioning to under ground cable in trenches/existing cable trenches/ducts in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable complete all as specified and directed by Engr in charge. Note: Punned thickness 18 cm shall be paid for sand cushioning.

Supply and laying Brick covering with width equal to length of brick as mechanical protection to cable with well burnt sub class ‘B’ bricks laid dry flat complete all as specified and directed by Engr in charge.

Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth wire 4 mm dia by means of nut, bolts, check nuts and washers of galvanised iron or steel complete all as specified and directed including testing on completion including the material and labour of the following : - (a) Excavation and earth work for drilling hole for electrode in any type of Soil. (b) PCC pit in cement concrete 1:2:4 type B-1, Pre cast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 15 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing.