Requirement of Spares for The Maintenance of The Atlas Copco Screw Air Compressors Installed in Compressor Houses.

Description :Oil filter kit for Atlas Copco G160 screw air compressor, Maximum pressure= 20 Bar, Filter O D = 136 mm, Length = 307 mm, Seal OD= 111.5 mm, Seal ID: 99.5 mm [ Warranty Period: 30 Months af ter the date of delivery ] ] Consignee WORKS MANAGER/MH/TPT, RCF Punjab 4.00 Numbers

Description :Flexible coupling for Atlas Copco GA160 screw air compressor, Material= Flex rubber, No. of t eeth = 24 nos., OD = 284 mm, ID = 165 mm, Thickness = 138 mm [ Warranty Period: 30 Months after th e date of delivery ] ] Consignee WORKS MANAGER/MH/TPT, RCF Punjab 1.00 Numbers

Description :Unloader Valve Kit for Atlas Copco G160 screw air compressor, Components= Blow off valve, NBR O- ring set (5 nos), M26 washer, valve solenoid, seal lip, tape, and Teflon seal kit [ Warranty Period:

Consignee WORKS MANAGER/MH/TPT, RCF Punjab 1.00 Numbers

Description :Kit for water separator for Atlas Copco GA160 screw air compressor, Components: O Ring size = 152 X 3.5 mm, Stud, Drain valve, O ring size= 114.5 X 3 mm [ Warranty Period: 30 Months after the da te of delivery ] ] Consignee WORKS MANAGER/MH/TPT, RCF Punjab 1.00 Numbers

Description :Oil separator kit for Atlas Copco G160 and GA160 WFF screw air compressor, Flange OD = 60 0r mm, Flange ID = 265 mm, PCD = 555 mm, Hole diameter = 20 mm, Total 16 holes, Total Height = 350 mm, Separator lower diameter=340 mm, gasket to be included [ Warranty Period: 30 Months after the d ate of delivery ] ] Consignee WORKS MANAGER/MH/TPT, RCF Punjab 3.00 Numbers

STORES/HSQ/RCF Description :Air filter for Atlas Copco G160 screw air compressor, overline OD = 280mm , Overall length =

delivery ] ] Consignee WORKS MANAGER/MH/TPT, RCF Punjab 2.00 Numbers

Description :Differential pressure sensor for Atlas Copco GA160 screw air compressor, Range 0 to 3 Bar dif ferential, Process Connection torque 5 Nm max [ Warranty Period: 30 Months after the date of delivery ] ] Consignee WORKS MANAGER/MH/TPT, RCF Punjab 1.00 Numbers

Description :Cable adaptor for pressure sensor for Atlas Copco GA160 screw air compressor, Shielded cabl e, Length approx. 6-8 inches, IP 67 rating, AC/PN=2236026400, compatible with Elektronikon controller pre ssure input wiring. [ Warranty Period: 30 Months after the date of delivery ] ] Consignee WORKS MANAGER/MH/TPT, RCF Punjab 3.00 Numbers

Description :Air filter for Atlas Copco GA160 screw air compressor, OD = 350 mm,, Overall length = 355 m m, Top collar height = 20 mm, Collar ID = 180 mm [ Warranty Period: 30 Months after the date of deliver y]] Consignee WORKS MANAGER/MH/TPT, RCF Punjab 2.00 Numbers

Description :Pressure sensor Atlas Copco GA160 screw air compressor, Range= -1 to 17 Bar relative press ure, Output = DC 0.5 to 4.5 V, three wire, Process connection material =SS304, bayonet connector [ Warr anty Period: 30 Months after the date of delivery ] ] Consignee WORKS MANAGER/MH/TPT, RCF Punjab 2.00 Numbers