REPAIR REPLACEMENT TO EXTERNAL INTERNAL PERIODICAL ROOF TREATMENT PLASTERING JOINERY SANITARY PLUMBING AND OTHER MISC BR ITEM IN OFFRS MD ACCN AT KIRBY PLACE UNDER AGE BR I OF GE NORTH DELHI CANTT 10

Amount

Taking down chowkhats or frames with shuttes (without taking off shuttes from the frame) exc 1.5 sqm but n exc 4 sqm each complete all as specified and directed.

Taking down chowkhats or frames with shuttes (without taking off shuttes from the frame) n exc 1.5 sqm each complete all as specified and directed.

Taking down shutters of any description area exc 1 sqm but n. exc 2 sqm each complete all as specified and directed.

Taking down cement or cement plaster on brick walls/ceiling etc including raking out joints, hacking for key, scrubing down with water etc complete all as specified and directed.

Providing and fixing factory made uPVC white colour sliding window three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh sash (42mm x 57mm) sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware. EPDM gasket, 1.2mm + -0.2mm thick galvanised steel frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, hardware touch lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. Note:- The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

Taking down 15mm dia steel tubing and connection complete all as specified

Taking down 20mm dia steel tubing and connection complete all as specified

Disconnecting existing tanks of capacity exc 250 Ltrs and n exc 500 ltrs, setting aside (or lowering if required) for rapairs, cleaning, etc. and hoisting if required reconnecting and refixing in position. (Cleaning repairing, etc measured separately)

Cleaning and removing all scale and dirt, etc from tanks of capacity exc 250 & n exc 500 ltrs and from mouths of circulating pipes etc.

Hacking out old broken glass (any thickness, size, quality or discription) from wooden frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

M&L for following:- (a) Chipping of spalled and loose concrete and cleaning rust from reinforcement by sand blasting scrubbing down concrete surface with wire brushes, cleaning with water, allowed to dry and (b) Applying a layer of zinc rich epoxy primer as antirust on all exposed reinforcement followed by a layer of bonding coat of epoxy primer as antirust on all exposed reinforcement followed by a layer of bonding coat of epoxy adhesive on complete exposed surfaces of concrete to be gunited. (c) Applying two layers of guniting over steel welded mesh 2mm dia of wire and aperture 75mm, total thickness of gunite n exc 25mm thick (average thickness) in cement mortar 1:3 using OPC-53 grade cement mixed with polycrete admixture @ 2% by weight of cement or as per manufacturers instructions. (d) Finally applying cement plaster over gunited surface of equired thickness to give even uniform and smooth finish conforming to proper gerometrics in cement mortar (1:3) to match with the existing surface as in sides and soffits etc of slabs, chajjas, fins, facias parapets, columns and beams etc complete including necessary scaffolding shutttering necessary chases to brick work or RCC members at any height upto 4 storey bldgs complete all as specified and directed. Note- Steel welded mesh is to be tightend/welded with the existing reinforcement. The cost of welded mesh is deemed to be includd in the unit rate quoted by the contractor.

M&L 15mm thick ready mix plaster on brick work on concrete surface of wall (internal surfaces) finished even and smooth all as specified and directed

M&L 5mm thick ready mix plaster on ceilling surfaces finished even and smooth all as specified and directed

M&L 15mm thick ready mix plaster on brick work on concrete surface of wall (external surfaces) finished even and smooth all as specified and directed

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long.

S&F in repairs sheet glass corner shelf assembly consisting of 5.5mm thick sheet glass with chromium plated bracket guard and railing.

S&F in repairs CP stainless steel connection pipe 600mm premium quality for gyser, WHB complete all as specified.

S&F in repairs stainless steel, wire cloth 0.45mm nominal dia of wire, and average width of aperature 1.40mm and fixed with stainless steel wire stapples complete all as specified.

S&F in repairs 4mm thick sheet glass ordinary quality in squares n.exc. 0.50 sqm in each pane fixed with oil putty or wooden beaading complete all as specified.

M&L for old size brick work with fly ash bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 including Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast articles, complete all as specified and directed.

S&F factory made double rebated extruded WPC (wood polymer composite) olid door / window / ceosetory windows & other frames/ chowkat of size 65mm x 125mm comprising of virgin PVC polymer of K value 50-60 (suspension grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and non toxic additives (max toxicityindex of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg /cum, screw withdrawal strength of 2200 N (face & 1100 N edge), min compressive strength of 58N/sqmm and resistance to flame of class a category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr in charge. Note:- for WPC solid door/windows frames, minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable. Variation in profile dimension on plus side shall be acceptable but no extra payment on this account shall be made

Providing 30mm thick factory-made wire mesh solid WPC door shutter consisting of density 650 Kg /cum manufactured by an ISO-9001-2015 certified Company, Door to be panneled with SS mosquito mesh and XTN aluminium mesh for additional strength and safety purpose (confirming as per IS:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. SS butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through other hardwares should be fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in-charge, manufacturer's specification & drawings.” Note: Fixture/fittings shall be measured & paid under relevant item except meshes.

S&F factory made single extruded WPC (wood polymer composite) solid door/ window/ceosetory windows & other frames/ chowkhat of size 45mm x 70mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (face) & 1100 N (edge), minimum compressive strength of 58 N /mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of class a category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note:- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F providing and fixing factory made single extruded WPC (wood polymer composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (face) & 900 N (edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of class a category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer?In- Charge. Note: Stainless steel butt hinges and necessary stainless steel screws shall be paid separately under respective item of BOQ.

S&F aluminium window as per TD drg No. CEDZ/TD-316 with following specifications :- (i) Outer frame of size 40mm x 114mm with 1.3mm thickness, corner 45 degree cut & aluminium welded. (ii) Center mullion of size 40mm x 65mm. (iii) Welded shutter (02 Nos) of size 40mm x 60mm x 1.3mm thickness 45 degree cut mechanically joint with 6mm allen key bolt clamp with 5mm clear glass both side EPDM rubber gasket metal body hand lever type single point lock, aluminium kobra hinges 2 Nos per shutter. (iv) 12mm SS 202 grade round bar safety grill at 100mm cc distance modified to 150mm cc distance in front of handle, welded at both ends with 6mm SS 202 grade round bar. (v) Welded wiremesh shutter (2 Nos) of size 40mm x 18mm x 1.3mm thickness 45 degree cut with 0.45mm nominal dia of SS wire mesh, SS 75mm long hinges & PVC magnet. (vi) Entire window shall be powder coated with pure polyster coat of any shade as approved by GE. (vii) Window shall have provision for installation of window AC/Desert Cooler and provision of window glass shutter, wiremesh, grill and necessary fittings and locking arrangements for subject portion will be modified as per ground requirement during the execution as per directions of Engr-in-charge. (viii) Window shall be installed with silicone complete all as specified and directed by Engr-in-charge.

S&F fibre glass reinforced plastic (FRP) door frames of cress section 90mm x 45mm having single rebate of 32mm x 15mm to receive shutter of 30mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs, The frame shall be covered with fiber glass from all sidesl. M.S. stay shall be provided at the bottom to steady the frame, complete as specified by the manufacturer and as per directions of Engineer-in-Charge.

S&F existing door frames 30mm thick glass fibre reinforced plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire-reardant grade unsaturated polyester resin, moulded to 3mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate for panels conforming to IS-14856, including fixing to frames complete as specified bythe manufacturer's and as per directions of Engineer-in-Charge.

S&F chowkats 2nd class hard wood plain, framed, panelled shutters 30mm thick (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers and framing is moulded on solid (for each side) complete all as specified and directed.

M&L applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified and directed.

M&L applying two coats of synthetic enamel paint on new steel surfaces of any description over 10cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete all as specified and directed.

M&L preparation of newly plastered surface on walls and applying two coat of oil bound distemper over a coat of wall care putty complete all as specified and directed.

M&L for preparing newly plastered surfaces of wall and applying two coats of white wash complete all as specified and directed.

M&L for preparing newly plastered surfaces of ceilling and applying two coats of white wash complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement based paint over a coat of cement primer complete all as specified and directed.

M&L for preparation of old /new plastered /unplastered surfaces of wall and applying two or more coat of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489;2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new surface complete all as specified and directed.

M&L for complete removal of existing treatment and preparing surfaces plastered or unpllastered surface and applying two coats of plastic emulsion paint over a coat of wall care putty complete all as specified and directed. Note:- Plastic emulsion paint shall be done with roller of required size instead of brush.

S&F in repairs 200-250 ltrs capacity rotational molded polyethylene water storage tanks of approved make (rectangular in shape with closed top white semi transprant) hoisted and fixed in position including dismantling existing water tanks and removing to stores etc all as specified and directed.

S&F stainless steel drapery curtain rods conforming to ASTM Schedule 5S gold or antique silver 25mm nominal dia, 2mm thick of SS-304 grade of approved quality with two number decorative brackets design as approved fixed in brick/concrete wall with same finished knobs/latto on each end of curtain rod including taking down old pelmet, complete all as specified and directed.

M&L non skid ceramic colored tiles 7mm to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floor etc set and jointed in neat cement slurry and pointed in colour cement laid over and including 15mm thick cement mortar screed bed in CM 1:6 complete all as specified and directed.

M&L for double charged vitrified ceramic coloured tiles 8mm to 10mm thick (square/rectengular) polished, area of each tile n. exc 0.36 sqm as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the surface insluding 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for glazed coloured ceramic tiles in wall surfaces area of each tile exc 0.075 to 0.15 Sqm, 7mm to 8mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the surface over including 10mm thick in cement mortar 1:4 even and fair for receving tiles on vertical surface complete all as specified and directed

Complete removal of existing treatment & levelling of wall surface using mechanical / electrical operated sanding / scraping machine with in-built vaccum suction system to suck the existing treatment as retrieved by scrapping/sanding etc. omplete all as specified and directed

M&L for applying 3mm thick water proofing wall care putty including washing, rubbing and cleaning after executing of ser item No 45 above complete all as specified and directed by Engr-in-Charge. Note:- Washing to be carried out using high pressure washer machine to make the wall surface dust free before applying wall care putty.

M&L for two coats of oil bound distemper over prepared surface of wall using auto-roller and airless paint sprayer complete all as specified and directed

M&L for complete removal of existing treatment over old decorated plastered or unplastered surfaces with removing nails, filling holes with putty and making good and smooth finish of wall and applying two coats of oil bound distemper, applied with roller complete all as specified and directed .

M&L for preparation of old decorated previously treated surfaces of wall by brooming down scrapping down smoke and efflorescent salts etc and applying one coat of white wash on walls complete all as specified and directed by GE.

M&L for preparation of old existing decorated or treated surfaces of ceiling by brooming down scrapping down smoke and efflorescent etc. omplete and applying one coat of oil bound distemper complete all as specified and directed.

M&L for preparation of old decorated previously treated surfaces of ceiling by brooming down scrapping down smoke and efflorescent etc. complete and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old decorated previously treated surfaces of wall by brooming down scrapping down smoke and efflorescent, nails and holes fill with putty and making good smooth surface etc. complete and applying two coat of 1st quality acrylic distember (ready mixed) having VOC content less than 50 gms/litre of approved manufacturer, of required shade and colour complete as per manufacturer's specification complete all as specified and directed.

Complete removal of exteranal existing treatment & levelling of wall surface using mechanical / electrical operated sanding / scraping machine with in-built vaccum suction system to suck the existing treatment as retrieved by scrapping/sanding etc complete all as specified and directed by GE

M&L for two coats of cement base paint over prepared surface of wall using auto-roller and airless paint sprayer complete all as specified and dircted by GE.

M&L for complete removal of existing treatment of wall including cornices etc by washing, rubbing down and stopping holes with filling wall care putty, and applying two coats of cement base paint of approved shade working height up to 30 mtr from ground level including necessary jhula and safety measure or scaffolding complete all as specified and directed.

M&L for complete removal of existing treatment of wall including cornices etc. by washing, rubbing down and stopping holes with filling wall care putty, and applying two coats of cement base paint of approved shade complete all as specified and directed.

M&L for one coat of synthetic enamel paint on old steel painted surfaces including preparation of surfaces of any description not otherwise descriped over 10cm width or grith complete all as specified and directed.

M&L for one coat of synthetic enamel paint on old wooden painted surfaces including preparation of surfaces of any description not otherwise descriped over 10 cm width or grith complete all as specified and directed.

S&F solid PVC wall lining consisting of 5mm thick plain coloiur PVC sheet inclusive of solvent cement and fixing 5mm thick PVC frame work including corners edges as per specifications and drawing

S&F butt hinges, 100mm size medium weight, cold rolled mild steel complete all as specified and directed.

S&F aluminium handles 150mm size cast type, anodised complete all as specified and directed.

S&F 200mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 300mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete all as specified and directed.

S&F in repair floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed to floor of size 140mm complete all as specified and directed.

M&L for steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 15mm, including groove cutting in walls complete all as specified.

S&F steel water tubing medium grade galvanised with all fittings including short lengths, laid in trenches complete with all fittings (such as bends, elbows, tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 20mm complete all as specified.

S&F in repair stop valve, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 20mm bore complete all as specified.

S&F in repair water closet squatting pan ``Orissa pattern`` 580mm x 440 mm, white with integral foot rests including fixing of flushing cistern, connection to trap, anti syphonage pipe etc complete all as specified including provision of lime concrete bedding.

S&F in repair PVC low level flushing cistern 10 ltrs capacity incl PVC float valves, PVC connection and out let pipes complete all as specified and directed.

S&F in repair toilet paper holder with flat recessed type stainless steel complete all as specified and directed.

S&F in repairs brass chromium plated bottle traps 32mm bore for wash basins with inlet and outlet scewed for pipe or connections including necessary packing union and cap etc.

Dismantling /taking down PVC/CI drain/Rain Water Pipe under floor or wall of internal dia 75/100mm, set in cement mortar/ Bricket complete includig fittings complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 75mm bore complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110mm bore complete all as specified and directed.

S&F PVC (SWR) bends any radius, 75mm bore, complete all as specified and directed.

S&F PVC (SWR) bends any radius, 110mm bore, complete all as specified and directed.

S&F in repair 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate mix with WPC complete all as specified and as directed. Note:- The cost of WPC is deemed to be included in quoled rate against this item.

S&F in repair 20mm gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair 15mm bore bib cock with long thread, chromium plated, with long body, wall flange screwed for iron pipe or for brass ferrule and fixed to 15mm bore pipe complete all as specified and directed.

S&F in reapirs angular stop valve cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm dia pipe, all as specified.

S&F in repairs bib tap long body fancy type chromium plated cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe of size 15mm bore all as specified

S&F in repairs PVC connections 15mm size with PTMT nuts of length 650 mm complete all as specified and directed.

Dismantling boarding any description fixed in any position with nails etc complete all as specified and directed.

“S&F fctory made 18mm thick 100% solid WPC (wood polymer composite) plain board of required size comprising of virgin PVC resin of K value 57-60 (suspension grade), calcium carbonate and natural fibers (wood powders/ rice husk/ wheat husk) and non toxic additives, made froms extrusion process WPC foam sheet single extruded (Inner) with density not less than 650 kg/cbm certified company, having good screw holding capacity (screw withdrawal strength of 2000 N (face) & 1100 N (edge), minimum compressive strength of 50 N/mm2, modulus of elasticity 850N/mm2 and resistance of spread of flame of class a category with property of being termite/ borer free. water/ moisture proof, fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer-in-Charge, material test certificate and authentication should be compulsory provided by the manufacturing company: For WC/ bathroom/ toilet/ kitchen & cabinets.”

S&F factory made 18mm thick 100% solid WPC (wood polymer composite) laminated board of required size comprising of virgin PVC resin of K value 57-60 (suspension grade), calcium carbonate and natural fibers (wood powders/ rice husk/ wheat husk ) and non toxic additives, made from extrusion process WPC foam sheet. Single extruded (inner) with having minimum density not less than 650 kg/cum having good screw holding capacity (screw withdrawal strength of 2000 N (face) & 1100 N (edge), minimum compressive strength of 50N/mm2, modulus of elasticity 850N/mm2 and resistance of spread of flame of class a category with property of being termite/ borer free. Water/ moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws. All as per direction of Engineer-in-Charge, material test certificate and authentication should be compulsory provided by the manufacturing company: for WC/ bathroom/ toilet/kitchen and cabinets.

S&F magnetic catches with steel body 'H' type, fixed to shutter complete all as specified and directed.

S&F 100mm dia oval shape brass handle fancy type polished bright finished complete all as specified and directed.

Continous (Piano) hinges, brass, 30mm width of flaps (when open) complete all as specified and directed.

S&F in repair 4 levers brass cup board locks grade-I size 65 mm complete all as specified and directed.

S&F in repair 4 levers brass lock for drawer grade-I, size 65mm complete all as specified and directed.

M&L for granite work table rubbed polished in kitchen cooking platform including 20mm thick cement mortar screeding in CM 1:4 pointing in white cement using marble dust with admixture of pigment to match with shade of granite including taking down of old damaged granite/marble complete all as specified and directed.

S&F stainless steel basket (plain) of size 50cm x 37cm x 10cm made of 4mm thick S.S. wire approved quality with suitable arrangement for fixing telescope basket (channel) 11/25 inch length two way extruded MS galvanised over rollers of approved make.

S&F stainless steel thali basket (11-13 division) of size 50cm x 37cm x 20cm made of 4mm thick S.S. wire approved quality with suitable arrangement for fixing telescope basket (channel) 18/25 inch length two way extruded MS galvanised over rollers of approved make.

S&F stainless steel plate basket (11-13 division) of size 50cm x 37cm x 16cm made of 4mm thick S.S wire aproved quality with suitable arrangement for fixing telescope basket (channel) 18//25 inch length two way extruded MS galvanised over rollers of approved make.

S&F stainless steel partition basket of size 50cm x 37cm x 16cm made of 4mm thick S.S. wire approved quality with suitable arrangement for fixing telescope basket (channel) 18/25 inch length two way extrude MS galvanised over rollers of approved make.

S&F stainless steel cutlary basket of size 50cm x 37cm x 10cm made of 4mm thick S.S. wire and bottom of S S perforated sheet approved quality with suitable arrangement for fixing telescope basket (Channel) 18/25 inch length two way extruded MS galvanised over rollers of approved make.

S&F stainless steel basket (plain) of size 50cm x 7cm x 16cm made of 4mm thick S.S wire approved quality with suitable arrangement for fixing telescope basket (channel) 18/25 inch length two way extruded MS galvanised over rollers of approved make.

S&F stainless steel bottol full out of size 50cm x 40cm x 16 cm in two tier made of 4mm thick S.S wire approved quality with suitable arrangement for fixing telescope basket (channel) 18/25 inch length two way extruded MS galvanised over rollers of approved make.

S&F telescope basket (channel) 18/25 inch length extruded MS galvanised over rollers of approved make

Providing & fixing false ceiling with semi perforated 12mm thick micro tegular edged at all heights with GRG (glass fibre reinforced gypsum) false ceiling tiles of size 595mm X 595mm of approved texture, design and pattern having moisture content less than 2% , humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987 , non combustible as per BS 475 (part-4) -1970 and light code description unit rate No. 429 sub head : 26:0 new technologies and material reflectance of 85% minimum to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanised @ 120 gms per sqm including both sides ) comprising of main-T runners of size 15mm x 32mm of length 3000 mm,gross-T of size 15mm X 32mm of length 1200mm and secondary intermediate cross-T of size 15x32 of length 600mm to form grid module of size 600mm x 600mm, suspended from ceiling using galvanised mild steel items(galvanising @ 80 gms per sqm) i.e. 50mm long , 8mm outer diameter M-6 dash fastners , 6mm dia fully threaded hanger rod upto 1000mm length and L shaped level adjuster of size 85mm x 25mm x 2mm. galvanised iron perimeter wall angle of size 24mm x 24mm xmm 0.40mm of length 3000mm to be fxed on perimeter wall/partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall screws . The work shall be carried out as per specification, drawing and as per direction of the Engr-in-charge.

S&F in repairs CP mixer pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, mixing 'Hot' or 'Cold' water with long screwed shanks and fly nuts, screwed for iron pipe and fixed of bore dia 15mm complete all as specified and directed.

S&F in repairs 15mm dia chromium plated quarter turn wall mixer hot & cold & bend 3 in 1 pattern fixing and connection to pipes, complete all as specified and directed.

S&F in repairs kitchen sink mixer 15mm dia CP brass fancy type including joints to steel pipe or unions, complete all as specified & directed.

S&F in repairs elegent mirror PVC cabinet with towel rail of size 450mm x 600mm x 150mm complete all as specified

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white including fixing bolts, flushing cistern and flush pipe connection to trap and to flushing pipe including provn of cement concrete beading complete all as specified and directed.

S&F in repairs plastic water closet seat cover colour as approved closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device.

S&F in repairs shower rose fancy type bass chromium plated 125mm heavy duty pattern with swivel joints type screwed for 15mm bore including jointing to pipe or unions complete all as specifed and directed.

M&L for bitumastic gola, with 80/25 bitumen and coarse sand mixture 1:3 by weight 8cm x 8cm at the junction of roofing to veriical or horizontal surfaces.

Mild steel conforming to Fe 410-0 or Fe 310-0 in framed work such as grills, gratings, ladder, hinges, door frame, desert cooler stand etc with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; ladders; railings, coolar stand and similar work complete all as specified and directed.

S&F pre-painted galvalume aluminum zink coating GI based corrugated /semi corrugated steel sheet 0.50mm thick of any colour as approved having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws to MS framed, roof at any slope, including taking down any type of sheet all as specified and directed.

M&L for laying of APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt not less than 150gms/sqm) land on primed surface by forced application or fixed with buten torch with adequate overllaping, including removing existing treatment and making surface smooth with cm 1:4 complete all as specified

S&F in repair CP hand spray (health faucet with 1.5 m long easy flexible tube in secured or sorrounded with chrome finish flexible coil with wall hook) complete all as specified and directed. Make:- Cat part No ALD-CHR-583 of make Jaquar or equivalent in CERA / HINDWARE/PRAYAG as approved by GE.

S&F in repair 2 in 1 angle valve 15mm CP fancy pattern type cast copper alloy screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed

The new hut furnitures (BID ID -3313929)

DEEP ASSOCIATES (BID ID -3308332)

V M CONSTRUCTION (BID ID -3313655)

M/S SURINDERAS CONSTRUCTION CO. (BID ID -3314384)

QUALITY CONSTRUCTIONS CO (BID ID -3313808)

M/S GR construction compony (BID ID -3320343)

m/s lovely cool air (BID ID -3314165)