Restoration of Electrical installation

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group B

Wiring for light / power plug with 2x4 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit alongwith 1 no. 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing etc. as required.

Wiring for light/power plug with 4x4 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit alongwith 2 nos. 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing etc. as required.

Wiring for circuit/submain wiring alongwith earth wire with the following size FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit etc. as required.

2 x 1.5 sq. mm + 1 x 1.5 sqmm earth wire

4x1.5 sqmm+2x1.5 sqmm earth wire

2 x 6 sq. mm + 1 x 6 sqmm earth wire

Supplying and drawing following size of FRLS PVC insulated copper conductor single core cable in existing surface / recessed steel/PVC conduit etc. as required.

2 x 1.5 sq. mm

3 x 1.5 sq. mm

4 x 1.5 sq. mm

2 x 4 sq. mm

3 x 4 sq. mm

6 x 4 sq. mm

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface codouit or cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing 2 module stepped type eletronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. (Make:- Havells crabtree/coral or SS make)

Supplying and fixing moduler blanking plate on the existing modular plate & switch box excluding modular plate etc. as required

Supplying and fixing of following modular switch/socket on the existing modular plate and switch box including connection but excluding modular plate etc. as required.

5/6 A switch

3 pin 5/6 A socket outlet

15/16 A switch

6 pin 15/16 A socket outlet

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.

4 Module (125mmX75mm)

6 Module (200mmX75mm)

8 Module (125mmX125mm)

12 Module (200mmX150mm)

Supplying and fixing suaitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amp moduler socket outlet and 15/16 modular switch connection etc. as required.

Supplying and fixing suaitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 amp moduler socket outlet and 25 amp modular SPMCB "C" curve including connection,painting etc. as required.)

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) (Make:- MDS/Havells or SS make)

4 way (4+12) , Double door

8 way (4+24) , Double door

Supplying and fixing following way, horizantal type single/three pole and neutral,sheet steel, MCB distribution board, 240/415 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator)

12 way SPNDB, Double Door

4 way (4+12) TPNDB, Double Door

6 way (4+18) TPNDB, Double Door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.(M/S MDS Legrand/ L&T / Schneider Electric/ Siemens / Standard/ C&S/ABB/HPL )

Single pole

Triple pole

Providing and fixing following rating and breaking capacity MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.( M/S MDS Legrand/ L&T / Schneider Electric/ Siemens / Standard/ C&S/ABB/HPL )

100 Amp, 16 KA

Supplying and fixing following rating, double/four pole, 240/415 V,isolator in the existing MCB DB complete with connections,testing and commissioning etc. as required.(Make:- MDS / L &T Havells or SS make)

63 A 240 V double pole

63 A 415 V four pole

SITC of 30 watt Fully diffused recessed mounted 2'X2' LED luminaire with high transmitive diffuser suitable for indoor spaces with accessories i/c making connection as required ( M/s Philips model FullGlow Essential or SS make)

300 mm x 300 mm (Nominal dimension) Surface Type LED Flat Panel of nominal wattage 15W ± 15% ( M/(Make:- Havells EDGEPRO/Philips or SS make)

SITC of 4 feet, 22 watt LED Tube light with integral LED driver, on the surface of wall / ceiling i/c making connection complete as required at site.( M/s havells make REGAL BATTEN model REGALBATTEN T8 UPTO1X22WDSBSWH or equivalent SS make.

SITC of 10 WATT LED bulk head Light FITTING on the surface of wall / ceiling I/C MAKING CONNECTION TESTING ETC AS REQUIRED AT SITE. M/s havells make model no RUGBYGENXFTS10WLED865SSYMBOPC or equivalent similar superior make.

Supply and fixing of 450 mm sweep padestal fan with wiremesh gaurd etc complete with all accessories connections etc. as required. (Make Havells/Bajaj or SS make)

Supply & Fixing of 3.5 core 25 Sq mm Aluminium Conductor PVC insulated PVC sheathed armoured power cable on surface/wall i/c saddling & clamping complete as required.(Havells/Polycab or SS make)

S/M end termination of the following sizes with brass compression gland i/c aluminium lugs for following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1KV grade as reqd.

3.5x 25 Sqmm

Providing & Fixing 6 SWG Dia G.I. Wire on surface o in recess for loop earthing along with existing cable as required,

Disconnection & Dismantling of existing burnt wiring,conduit, Light Fittings,Fire Detectors and LT Cable, loose wire and store the material at desired location at Ground Floor etc. with out interrupting the services of Exchange or as per instruction given by Engineer In Charge complete as required.