Andaman Nicobar

Active

Works

Civil Works - Others

Civil Work

Chief Engineer Andaman Public Works Department (APWD)

Executive Engineer CD, APWD, Campbell Bay | Nicobars, Andaman And Nicobar Islands

Amount: ₹3.0 LCloses: 28 Sept 202617 Sept 20266d left

Timeline

Published7 Sept 2026
Closes28 Sept 202617 Sept 2026
Bid Opening29 Sept 202618 Sept 2026

Corrigenda

Corrigendum

1 updatesLatest on 17 Sept 2026Submission Ends:17 Sept 202628 Sept 2026

Date changes

Download Ends17 Sept 202628 Sept 2026Submission Ends17 Sept 202628 Sept 2026Bid Opening18 Sept 202629 Sept 2026

Tender Value

₹3.0 L

EMD Value

₹5,974

Closing Date

28 Sept 2026, 10:00 am6d left

Tender Inviting Organisation

Name

Executive Engineer

Address

Office of the Executive Engineer CD, APWD, Campbell Bay

Work Description

Providing informatory road signage from Campbell Bay to Shastri Nagar on State Highway-02, GNI. (3rd Call)

Tender Information

Tender ID

2026_APWD_24570_1

Reference Number

02/EE/CD/CB/2026-27

Tender Type

Open Tender

Product Category

Civil Works - Others

Form of Contract

Percentage

Period of Work

30 days

Location

Executive Engineer CD, APWD, Campbell Bay

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

8 documents required · 8 mandatory

Fee/PreQual/Technical

RequiredScan copy of EMD (.pdf)

RequiredCertificate of Work Experience (.pdf)

RequiredAffidavit as per clause 1.2.1 of CPWD 6 on Indian Non-Judicial Bond/Stamp paper (.pdf)

RequiredCertificate of Registration for GST (Good Service Tax). (.pdf)

Required10 (Ten) years Financial Audited Statement of Account from a Charted Accountant (.pdf)

RequiredList of all ongoing work under all Govt. of India Organization in these Islands with their Physical (.pdf)

RequiredUndertaking as per clause 1.2.2 of page No. 6. (.pdf)

Finance

RequiredPricebid (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹5,974

Important Dates

Last Activity

28 Sept 2026

Published

7 Sept 2026

Bid Opening

29 Sept 2026

Download Starts

7 Sept 2026

Download Ends

28 Sept 2026

Submission Starts

7 Sept 2026

Bill of Quantities

PercentageBoQ_Ver4.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (4 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing ofsurplus excavated soil, as directed withina lead of 50 m and lift upto 1.5m.
1.1	All kinds of soil.	20	Each	124.3	₹2,486
2Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
2.1	1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources)	2.56	Cum	20,508	₹52,500.48
3Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required
3.1	In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works	527.2	kg	192.9	₹1,01,696.88
4Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in-charge. (Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment).
4.1	Overhead informatory road signage	17.7	Sqm	8,024	₹1,42,024.8

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.23 MB

Work Item Documents

TenderDoc02.pdf

Tender Documents • 0.69 MB

BOQ_26010.xls

BOQ • 0.30 MB

Instructions-to-bidders.pdf

Additional Documents • 0.33 MB

Corrigendum Documents

Extensionnotice1.pdf

PDF • 0.55 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing ofsurplus excavated soil, as directed withina lead of 50 m and lift upto 1.5m.
1.1	All kinds of soil.	20	Each	124.3	₹2,486
2Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
2.1	1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources)	2.56	Cum	20,508	₹52,500.48
3Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required
3.1	In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works	527.2	kg	192.9	₹1,01,696.88
4Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in-charge. (Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment).
4.1	Overhead informatory road signage	17.7	Sqm	8,024	₹1,42,024.8

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing ofsurplus excavated soil, as directed withina lead of 50 m and lift upto 1.5m.

1.1

All kinds of soil.

Each

124.3

₹2,486

2Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

2.1

1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources)

2.56

Cum

20,508

₹52,500.48

3Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required

3.1

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

527.2

192.9

₹1,01,696.88

4Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in-charge. (Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment).

4.1

Overhead informatory road signage

17.7

Sqm

8,024

₹1,42,024.8