Mohanur TP - Retender 15th FC Tied Grant 2023-24 Renovation of Community Toilet

Amount

Plain Cement Concrete 1:4:8 Mix (one Part of cement, four Part of M- Sand and Eight Part of aggrigate) using 40 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc., complete as per TNDSS NO : 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge.

Special ceiling Plastering in Cement Mortor 1:3 Mix (one Cement, Three M- Sand ) 10mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete . complying with std. specifications-10 m2.

Dadooing the walls with glazed tiles of 15 c.m x 15c.m 6mm size laid in cement mortor 1:2 mix 10mm thick and pointing with 0.40 kg white cement per m2 etc.

Supplying and fixing over the floors best quality of scratch ceramic tiles of 30 c.m x 30c.m x 6mm size of approved colour laying with cement mortor 1:3 mix pointing the joints with colour pigments etc. Complete.

Supplying and fabrication and fixing in position of anodised natural colour matt fininsh sliding window in TWO track in all floors with following sizes. All the two shutters with slinging entering and made with UPVC (ultra Polyvinyl Chloride ) section for outer frames as shown below with necessary accessories such rubber beading.clips, handle and fixing 5 mm thick clear sheet glass including all required for fabrication etc., complete. Necessary dismantling making holes in RCC columns, beams, mansory wherever necessary with power drill to the extent required and made good to the original conditions after fixing as directed by the dePart ofmental officers. (All materials should be got approved by the Executive Engineer before fixing in position).

Supply and fixing in position of G.I Sheet door using 20mm swg. G.I Plain sheet main frame with 40mm x40mm x 6mm M.S. Angle door frame 25mmx25mmx5mm M.S. Angle and using 25mmx5mm M.S. plate diagonal with necessary cutting bending drilling holes welding and one coat of primary etc., complete.

Supplying and fixing in Position of Indian Oriya pan type water closet with “P’’ or “S’’ trap to set in brick jelly concrete 1:4:8 Mix concrete 10 cm thick using 20mm brick jelly and top finished with c.m. 1:3 mix 20mm thick without any leakage etc. complete.

Supplying and Delivery of PVC/ GI Pipes and Specials etc complete 110mm PVC

110mm PVC elbow

110mm Tee Pvc

110mm Bend

32mm pvc pipe

32mm pvc elbow

32mm Pvc Tee

25mm Pvc tap

32mm U Clamp

32x25mm pvc reducer

40mm pvc tank nipple

1000 litre capacity HDPE tank

Exterior Emulsion paint Two coats with good quality of approved emulsion paint including cost of all materials to site and all labour charges charges for mixing applying and proper curing etc., complete

Supply and fixing of WT bulk head fitting with guard suitable for incandescent lamp with 60w bulb(SD 85)

Supply and fixing of single box type 4'40w fluorescent fitting complete with copper choke and condensor with TW round blocks on wall or ceilling with flu tube with pvc unsheathed copper leads from terminals to the fitting (SD 89)

Supplying fixing 16AMS MCB with box including cost and conveyence of all charges etc., complete as per standard specifications

C ASHOKCONTRACTOR