ADDITION/ALTERATION AND SPECIAL REPAIR OF SECURITY COMPLEX BUILDING AT NSD (SEWRI) UNDER GE (NW) MANKHURD

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 sqm each.incl taking down grill and stacking for issued under Sch of Credit.

Taking down chowkats or frames, exc 1.5 sqm but not exc 4 Sqm each with wooden/ flush/ PVC shutters (Without taking off shutters from the frame) including taking down of hold-fasts by cutting/chasing etc from existing surfaces and also taking down of MS grills (where exists), complete all as specified and directed.

Taking down aluminium windows n.exc 1.5 sqm each including frames/Tracks (openable or sliding) and grill complete all as specified and directed

S&F standard aluminium section powder coated (minimum thickness of powder coating shall be 50 micron and colour shall be as approved by GE ) as in frame, shutters for doors, window / ventilators, partitions, fixed / openable / sliding or in any pattern, cut to size, jointed with cadmium plated steel screws, including rubber beading or gaskets for fixing glass, provision of hinges, screws, plugs, handle, lock, roller, Nylon ball bearing etc complete all as specified and directed (Aluminium section shall be of make Jindal/Hindalco/ Indalco) Note:- Weight of Aluminium sections as per actual or as per IS or as per manufacturer, whichever is less, shall only be considered for payment. Cost of other items / accessories required for entire completion of the work shall be deemed to be included in the quoted rate. However glass panes and wire cloth shall be measured and paid separately as supply only under respective items.

S&F aluminium anodised Grills of approved design for window / Balcony ventilators and fixing with F/U channel for window, ventilators, balcony opening in architectual or rectangular type in existing building with C.P. brass/ stainless steel screws @ 200 mm centre to centre, , including drilling as required in RCC sections, complete all as specified and directed. Note: The Grills shall be of Model DG-102/DG-104 of Make Deco or equivalent make as approved by the GE.

M&Lfor Green Marble 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed.

M&Lfor Granite (of any type), 20 mm work (table rubbed and polished) in steps, jambs, pillars, windowcills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

M&L Rounding to edges of stone slabs of Granite or Green Marble of any thickness one edge such as in steps (Bull nosed) or Half round in cooking platform,and other similar situations completely all as specified and as directed by Engineer in Charge.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supply and fixing in opening as per specification given under SSR Part II 2010 including making good the disturbed surface. Make: Rajashree or equivalent.

M&L for factory made solid PVC panel type PVC door shutter 30mm thick consisting of frame madeout of MS tubes for top and bottom rails MS frame shall be covered with moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rails, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent supplying and fixing in the frame at site as per specifications and drawing given under SSR Part II 2004 complete as as specified. Make : Rajashree or equivalent.

M&L second class Hard Wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints etc complete all as specified and directed.

S & F factory made 35mm thick plain, framed panelled shutter (two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm veneered particle board with commerical veneering on both faces, the size of rails and stiles shall be as per IS:1003 (Part-I), kiln seasoned and chemically pressure treated of 2nd class hard wood , complete all as specified and directed.

S&F factory made class hard wood glazed and skeletion shutter 35mm thick, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR part-I, section 8, clause 8.20 (a); supplied and fitted to chowkats

Supply only 4mm thick figured glass, pinhead type for aluminium louvered windows, complete all as specified and directed.

M&L for 12mm Prelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminations fixed with screws to frame work completely all as specified and as directed

M& L for preparation of new wooden or wood based surfaces of any description , over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

M& L for preparation of Old wooden or wood based surfaces of any description , over 10cm in width or girth not otherwise described and applying one coats of synthetic enamel paint complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) including necessary formwork as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F in repairs 20mm dia Harrison rails, mild steel, chromium plated, curtain rails with minimum two brackets and including fixing brackets, stops, rollers etc, complete all as specified and directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet,cast or extruded section and fixing bolt of extruded section or cast aluminium alloy, complete all as specified and directed.

S & F stainless steel butt hinges with galvanised mild steel hinges pins 100mm size

S & F aluminium anodised barrel tower bolt of extruded section of size 150 mm length.

S/F aluminium, anodised, barrel tower bolts of extruded section of size 200 mm length.

S & F 150 mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed by Engr-in-Charge.

M&L for 4.8mm thick Sheet glass, ordinary quality and glazing with oil putty/rubber beading in square/rectangular size as required in each pane for Partition/Door/Window/Ventilator and similar works etc.

Supply and fixing Solar control film 25 micron reflective type (gareware sun control or equivalent) , sticked to glass panes as per instructions of manufacturers

Supply only aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm for new aluminium joinery, complete all as specified and directed.

S&F 8 mm thick PVC Wall Pannelling including fixing on metal grid and in corners fixing with U,A,H,L corners whichever required as per site requirement and as per manufacturers instructions completely all as specified and as directed by Engineer in Charge. Make :- Rajashree or equivalent

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc, complete all as specified and directed.

S/F framed work such as grills, gratings, etc. with ends of bars shouldered and / or riveted or forged into spikes: framed guard bars : barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290-0 Gde E -165

M/L preparing new steel surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zink chrome

Chipping, removing carefully loose/damaged concrete including plastering (total thickness upto 40mm ) from surfaces of RCC members, in any location by low impact Hammer/Breakar without damaging the structure & cleaning the surfaces with wire brush etc and disposal of debris out side MOD land complete all as specified and directed. Note : Hard concrete shall not be removed by force

M&L for cleaning existing reinforcement with wire/ rotary wire brush to a shining bright finish, making the surfaces free from loose material, dirt etc complete and applying two coats of alkaline rust converting primer conforming to ASTM-B-117 of make. "Feovert" of "Krishna Conchem" OR "Roff Rust Cleaner' of 'Pidilite' OR 'Shali Rustoff' of 'STP Ltd', on rebars with time interval of 1 hour between the coats, complete all as specified and directed. (Note :- Mode of measurement: superficial area of concrete will be measured.)

M&L for Anticorrosive Treatment to Reinforcement using Corroseal - ZR of M/s Krishna Conchem or Epoxy Zinc Primer of M/s. Dr. Fixit by application on exposed reinforcement in two coats with time interval of minimum 4 hours between each coat. The application shall be done by brush after cleaning/wire brushing to the exposed steel surfaces complete all as specified and directed . Note :- Mode of measurement: superficial area of concrete will be measured.

M&L for providing additional mild steel TMT bars in various structural RCC members like column, beams and Slab etc. including cutting, bending, fixing the bars, tying with and including binding wire etc., complete all as specified and directed.

M&L for shear connectors of 8mm dia TMT bars including anchoring of the reinforcement bars in existing RCC member by providing holes of minimum 10d depth and grouting in position with locfix (fosroc), including drilling of holes, cleaning and other relevant works, complete all as specified and directed.

M&L for Epoxy bond coat of Make Fosroc (NITOBOND-EP) OR EPOXY BONDING AGENT of Dr. Fixit OR equivalent of M/s. Krishna Conchem as approved by GE over exposed concrete surfaces prior to application of any type of mortar to ensure bond between old concrete & new concrete / mortar by brush application, complete all as specified and directed.

M&L for casting & repairing of excessively damaged distressedRCC members with prebatched, prepacked, single component ready to use microconcrete from M/s. Krishna Conchem Molith MC) or equivalent of Dr. Fixit as approved by GE at any level and at any lead or lift as directed including scaffolding , also including mixing , laying, levelling, finishing, curing etc as per manufacturer's specifications complete all as specified and directed.(Note : Reinforcement & formwork shall be only shall be measured and paid separately).

M&L for building up the profile of structural members using polymer modified mortar from M/s. Krishna Conchem (Molith PMM) OR Polymer mortar HB of Dr Fixit, while the bonding agent is still tacking upto 20mm thickness, including levelling, profiling , formworking ,scaffolding etc, complete all as specified and directed.

M&L forrnwork to sides of pillars. posts. struts. piers. columns and stanchions for rough finished surfaces of concrete,square,complete all as speicified and directed.

M&L building up the profile of structural members using polymer modified mortar of Krishna Conchem (Molith PMM) or polymer mortar HB of Dr Fixit while the bonding agent is tacking upto 40 mm thickness (of 20x20 mm each in 2 layers) including levelling ,profiling formworking ,scaffolding etc complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls etc including raking out joints, hacking for keys, scrubbing down with water complete all as specified including necessary scaffolding and safety arrangement

M&L for 12 mm thick polymer modified ready mix cement based plaster on the wall surfaces including finishing surfaces even and smooth, complete all as specified and diected Make: Easy Plast from M/s wall plast or chemplast or readyplast from Ultratech Note: The thickness of plaster specified above is the minimum thickness and the quoted rates shall also be deemed to include for provision of dubbing of the surfaces with ready mix plaster and nothing extra shall be payable on this account.

M&L for 15 mm thick polymer modified ready mix cement based plaster on the wall surfaces including finishing surfaces even and smooth, complete all as specified and diected Make: Easy Plast from M/s wall plast or chemplast or readyplast from Ultratech Note: The thickness of plaster specified above is the minimum thickness and the quoted rates shall also be deemed to include for provision of dubbing of the surfaces with ready mix plaster and nothing extra shall be payable on this account.

M&L for rendering 5 mm thick using polymer modified ready mix cement based plaster on the ceiling surfaces including finishing the surface of top layer even and smooth complete all as specified and directed make: easyplast from wall plast/readiplast from ultratech Note: The thickness of plaster specified above is minimum thickness and the quoted rates shall also deemd to be include for the provosion of dubbing of the surface and nothing extra shall be payable on this account. The rate also includes the rate of scaffolding and necessary safety measurements

Material & Labour for preparation of new plastered or unplastered surface and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.

Material & Labour for preparation of old plastered or unplastered surface and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.

M&L for preparation of new plastered surfaces on walls, for preparation of distempering applying 1 mm thick (minimum) white cement based wall care putty on surfaces of walls etc, as a levelling course for finishing even and smooth and to make the surface in plumb line and applying two coat of oilbound distemper over a coat of primer including stopping of nails holes,cracks etc and complete all as specified and directed.

M&L for Complete removal of existing treatment, preparation of old plastered surfaces on walls, for preparation of distempering applying 1 mm thick (minimum) white cement based wall care putty on surfaces of walls etc, as a levelling course for finishing even and smooth and to make the surface in plumb line and applying two coat of oilbound distemper over a coat of primer including stopping of nails holes,cracks etc and complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceilings, for preparation of distempering applying 1 mm thick (minimum) white cement based wall care putty on surfaces of walls etc, as a levelling course for finishing even and smooth and to make the surface in plumb line and applying two coat of oilbound distemper over a coat of primer including stopping of nails holes,cracks etc and complete all as specified and directed.

M&L for Complete removal of existing treatment, preparation of old plastered surfaces of ceilings, for preparation of distempering applying 1 mm thick (minimum) white cement based wall care putty on surfaces of walls etc, as a levelling course for finishing even and smooth and to make the surface in plumb line and applying two coat of oilbound distemper over a coat of primer including stopping of nails holes,cracks etc and complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, walls, aprons laid bedded and pointed in any Mortar etc.

M&L for coloured 450x300x6mm thick glazed ceramic tiles on vertical surfaces such as skirting,dado etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with the colour of tiles, over and including 10mm thick cement mortar backing coat in CM 1:4, complete all as specified and directed.

M&L for coloured Non-skid ceramic tiles 7 to 8 mm thick (square/ rectangular) of approved size, area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with nthe colour of tiles, over and including 15mm thick cement mortar screed bed in CM 1:6, complete all as specified and directed.

M&L Vitrified Ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match ,light shade over and including 15 mm thick cement mortar screed bed in CM 1:6 complete all as specified and directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and including 20 mm thick cement mortar screed bed in CM 1:6 complete all as specified and directed.

Dismantling completely existing roof treatment (excluding cement screed bed ) including loosened cement plaster and exposing the top surface of RCC slab and making good the same in CM 1:4 and removing rubbish, etc to a distance exceeding 500m and not exceeding 1.0km complete all as specified and directed by the Engineer-in-charge

M & L for APP modified roof treatment over existing roof slab etc to be executed through approved authorised applicator of the membrane manufacturer with the following specifications complete all as specified and directed:- (a) Applying oil bound bitumen primer @ 0.40 litre/ Sqm manufactured by the same manufacturer as that of APP with a density 0.87-0.89 Kg per litre at 25 degree centigrade on the prepared dry surface. (b) Laying APP modified water proofing membrane reinforced with non woven polyester fibre weight not less than 160gm/Sqcm using butane torch by torch application with 10cm side lap and 15cm end lap. (c) Physical properties of membrane shall be as under:- (i) Membrane weight not less than 3.50 Kg/Sqm. (ii) Non woven polyester weight not less than 160gm /sqm. (iii) Softening point of membrane not less than 150 degree Celsius. (iv) Joint tensile strength-longitudinal not less than 650N/Sqcm and transverse not less than 450 N/Sqcm (v) Tear strength-longitudinal not less than 300 N & transverse not less than 250 N. (vi) Elongation : > 20% in both directions. (vii) Impermeability under water pressure not less than 2 Kgf/cm2. (viii) Water absorption - Not more than 1% on mass within 24 hours. (ix) Cold flexibility - Minimum (-) 20C. (x) Dimentional stability % change = Maximum 1%.

M&L rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:4

M&L for applying one coat of solar reflective bituminous aluminium paint @ 0.10 Kg/Sqm over APP membrane surfaces, complete all as specified and directed.

S&F in repairs vitreous coloured China Europeon water closet (Pedestal Pattern) including 10 ltr capacity low level flushing cistern with necessary PVC connections 15mm size with PTMT nuts of length 450mm long etc complete. Jaquar Essco Model No of EWC - ECS-WHT-551SNPP183LZ or ECS-WHT-551PNPP183LZ

M&L for 15 mm dia Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified , Cat No 187 of Prayag or equivalent make as approved by the GE complete all as speicified

S&FTwo way Bib cock with flange 15mm dia Model no DLX-512ANKN of ESSCO or equivalent of Mark ,Parko as approved by the GE complete all as specified and directed.

S&F in vitreous China wash basin white, flat back size 550 x 400mm including 15mm dia fancy type pillar tap of Make ESSCO Model no DLX-507KN or equivalent of make Parko as approved by the GE, , chromium plated CP waste coupling, chain and plug, waste fitting, union and waste pipe 32mm dia of required length and all necessary 450mm long outlet and inlet PVC connections pipes with PTMT check nuts complete.

S&F vitreous china urinal half stall type (back or corner wall type ), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement with discharge pipe etc complete all as specified and as directed by Engineer In Charge.

S&F 15mm bore brass CP Stop Cock, Make ESSCO Model no DLX-526NKN or equivalent of make Parko as approved by the GE, complete all as specified and directed.

S&F 15mm bore brass CP Bib Tap, Make ESSCO Model no DLX-511KN or equivalent of make parko as approved by the GE, complete all as specified and directed.

S&F in repairs brass chromium plated, shower rose, 125mm size with and including 195mm long 15mm bore brass chromium plated shower arm with bend of 45 degree, complete all as specified and directed.

S&F for PVC (SWR) multi floor trap 75mm dia with grating including jointing with solvent cement

Taking up or down steel water tubing and connections of size 15mm bore, complete all as specified and directed.

Taking up or down steel water tubing and connections of size 20mm bore, complete all as specified and directed.

Taking up or down steel water tubing and connections of size 25mm bore, complete all as specified and directed.

Supply & fixing 15mm bore GI tubing, medium grade with and including all fittings and fixed to walls and ceilings or laid in floors, complete all as specified and as directed.

Supply & fixing 20mm bore GI tubing, medium grade with and including all fittings and fixed to walls and ceilings or laid in floors complete all as specified and as directed.

Supplying and laying of 20mm Outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified, complete all as specified and as directed.

Supply & fixing 25mm bore GI tubing, medium grade with and including all fittings and fixed to walls and ceilings or laid in floors complete all as specified and as directed.

M&L 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall in repairs

M&L 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall in repairs

S&F 75mm bore PVC (SWR) branch piece single (Single Y), equal or unequal with and including rubber ring joints, complete all as specified and directed.

S&F 110mm bore PVC (SWR) branch piece, single (single Y), equal or unequal with and including rubber ring joints, complete all as specified and directed.

S&F 75 mm bore PVC (SWR) Bends with and including oval access door and also including rubber ring joints, complete all as specified and directed.

S&F 110 mm bore PVC (SWR) Bends with and including oval access door and also including rubber ring joints, complete all as specified and directed.

S&F 20 mm dia brass chromium plated tubular towel rail 'D' type 600 mm long between flanges, complete all as specified and directed.

S&F cast iron Nahani trap with 75mm dia out let including grating, connecting, jointing to waste pipe with lead joints, also including embedding the same in PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) mixed with water proofing compound in the proportion as recommanded by the manufacturer(s), taking out existing unserviceable traps by hacking out concrete joints and making good of surfaces, complete all as specified and as directed .

M & L for filling of lean concrete 1:5:10 type E2 (using 40 mm graded stone aggregates ) for filling in sunken portion, as per requirement, complete all as specified and directed.

M&L for PCC 1:2:4, type -B-1, using 20mm graded stone aggregated as in sub base of sunkun floor mixed with WPC in the proportion as recommanded by the manufacturer(s), complete all as specified and directed, (Note : WPC will be measured and paid separately as supply only).

Material and labour for rendering 15 mm thick rendering in CM 1:4 mixed with WPC in the proportion as recommanded by the manufacturer(s), over top of sunken floor, roof surfaces etc, finished even and fair, complete all as specified and as directed Note: WPC shall be measured and paid as "supply only" separately.

M&L for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.20 Kg/Sqm including cleaning the surfaces over newly plastered surfaces of sunken portion, complete all as specified and directed.

Supply only intergal water proofing compound, complete all as specified and directed.

Dismantling existing water tanks of capacity exc 500 ltrs and not exc 1000 ltrs, complete all as specified and directed

Supplying and fixing rotational moulded polythylene water storage tanks, double layered (ISI marked) of 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I, including provision of necessary fittings for connecting the overflow, drain out, inlet and outlet pipes, complete all as specified and as directed.

S&F in repairs gunmetal gate valve, ISI marked with iron wheel head, screwed at both ends for iron pipe or ferrule of 25mm bore and provision of necessary fittings like unions, check nuts, etc, complete all as specified and as directed.

M&L plain cement concrete type C-1 1:3:6 (using 20mm graded stone aggregates) as in plinth protections 75 mm thick finished even and smooth w/o using extra cement with joints 10 mm wide and in full depth at corners and @ 3. m c/c filled with mastic mortar

M&L Precast cement concrete cover slabs 75mm thick and Crossectional area exc 0.36 Sqm and n.exc 0.5 Sqm each for drain cover and similar work with plain faces set in cement mortar 1:6 complete all as speicified and directed.

Demolition of reinforced cement concrete of any description as in slabs, beams, columns and in any position not otherwise specifically provided for including cutting of reinforcement as required to facilitate demolition and removing the retreived debris out side MD land, complete all as specified and directed.

M&L for TMT steel bars 10mm dia and over in reinforcement cut to length, bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc, complete all as specified and directed. Note : This item is applicable for new RCC Members as well as for provision of additional steel bars in the existing RCC Members.

M&L formwork to chullah hoods, chajjas, troughs and similar items including edges for fair finished flat surfaces of the concrete, complete all as specified and directed.

M&L for Reinforced Cement Concrete (Design mix) M30 Grade of concrete in Chajjas

Demoliton of Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M/L75 mm thick Cement Concrete in sub base of floors type D-2, PCC 1:4:8 ( 40mmgraded aggregate )

M&L for coloured Parking tiles, heavy duty of size 300x300x10 mm thick, set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the colour of the tiles, over and including 15mm thick cement mortar screed bed in CM 1:6, complete all as specified and directed. Make : JOHNS0N /SOMANI/ORIENT BELL/KAJARIA.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm

Demolition of Brickwork or stone/boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles but built in cement mortar complete all as specified and directed.

M&L for Pre cast cement concrete block masonry with solid block of grade(C-5) having block density not less than 1800 Kg/cum, exc, 10cm in width and setting in CM 1: 6, complete all as specified and directed.

Taking down carefully point wiring of any type & pattern (Light/Fan/Socket or power) including fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings of any type etc and making good disturbed surfaces of walls/ roof etc, complete all as specified and directed.

Taking down complete main switches/DBs with enclosure and its components of any size and capacity ,etc complete all as specified and directed.

M & L for Concealed point wiring complete with proper colour coding using, 1100 Volts grade, 1.5 Sqmm, PVC insulated FRLS, unsheathed wire with multi stranded copper conductor confirming to IS-694, Part II, ISI marked drawn in and including PVC conduit (minimum 25mm dia) with all accessories, fittings, PVC junction boxes etc, with suitabe sunk pressed steel boxes not less than 2 mm thick, also including 1.5 Sqmm, PVC insulated, FRLS, unsheathed, 1100 Volts multistranded copper conductor green colour as continuous earth wire connected to common earth dolly all as specified and directed for one light point /fan/bell point controlled by one one way switch, complete all as specified and directed.

-ditto- all as per item No. 109 above but for One 2pin/3 pin socket outlet 5 Amps on same board complete all as specified and directed.

-ditto- all as per item No. 109 above but for One 2 pin/3 pin socket outlet 5 Amps on independent board.

M&L for Concealed point wiring using proper colour coding with 1100 Volts grade, 2.5 Sqmm PVC insulated, FRLS, unsheathed, wire confirming to IS-694, Part-II, ISI marked with multistranded copper conductor drawn in and including PVC conduit (minimum 25mm in dia) with all accessories, fittings, PVC junction boxes etc, with suitable sunk pressed steel terminal box not less than 2 mm thick, also including 1.5 Sqmm, PVC insulated, FRLS, unsheathed, multistranded, copper conductor 1100 Volts grade, green color, continuous earth wire connected to common earth dolly for 15 Amps, 3 Pin, socket outlet independent complete all as specified and directed.

S&F modular type 6A one way SP switch 1 module confirming to IS: 3854-1997 with fingure proof terminal complete all as specified and directed.

S&F modular type 2/3 pin combined shuttered type 6 Amps socket 2 module conforming to IS: 1293-2005 complete all as specified and directed.

S&F modular type 2/3 pin combined shuttered typr 16 Amps socket 2 module conforming to IS: 1293-2005 complete all as specified and directed.

S&F modular type 16 A one way SP switch 1 module confirming to IS: 3854-1997 with finguer proof terminal complete all as specified and directed.

S&F modular type 120W step fan regulator of 2 module size conformng to IS: 11037-1984 complete all as specified and directed.

Supply & Fix Modular Bell push flush type 6 Amp, 1 module, 230 Volts complete all as specified and directed.

Supply and fix bell ding dong AC 230 V single pole. complete all as specified and directed.

S & F Modular Blank plate 1 module suitable for Modular switch boards all as specified and as directed

S & F Modular metal flush box with modular cover plate 8 modules

S & F Modular metal flush box with modular cover plate 6 modules

S & F Modular metal flush box with modular cover plate 4 modules

S & F Modular metal flush box with modular cover plate 3 modules

S & F Modular metal flush box with modular cover plate 2 modules

S & F Modular metal flush box with modular cover plate 1 module

S&F ceiling rose three terminal, 230 Volts PVC / Polycarbonate body, complete all as specified and directed.

S&F in repairs Surface, hanging and wall mounted batten (Double side connection) suitable for LED tube 20/22 watts, 230 volts alongwith tube rod 22 watt (double side connection), including fixing mounting blocks 2 Nos, 15 mm MS conduit, 1.5 sqmm 3 core pvc insulated copper conductor cable including fixing arrangements complete all as specified and directed. Make :- BAJAJ/ PHILLIPS/ JAQUAR/ WIPRO

Supply and fixing in replacement of LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including provision with three core flexible copper conductor cable of suitable size and PVC square blocks complete all as specified and directed. Make :- BAJAJ/ PHILLIPS/ JAQUAR/ WIPRO

Taking down old unserviceable ceiling fan 1200 mm sweep by disconnecting the electric power supply, unscrewing the bolts and nuts, removing the blades and transporting to workshop to undertake repairs by rewinding of burnt out winding using suitable gauge copper wire, replalcement of worn out capacitor 2.5 mfd - 01 No., PVC canopy - 02 No's and bearing including scrapping of old paint and applying two coats of synthetic enamelled white paint over a coat of red oxide primer complete and refixing back at site complete all as directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers complete all as specified and directed. Make :- ALMONARD / ORIENT

S & F MCB DB, 12 way, SPN, double door, 240 Volts and including cutting chases in wall, concealing DB in wall, making good the disturbed surfaces and making all connections complete all as specified and directed. Note: Quoted rate shall be deemed to include for provision of copper bus bar of 200 Amps rating. Make :-LEGRAND / SCHEINDER / L & T.

S & F MCB DB, 4 way, TPN, double door, 415 Volts and including cutting chases in wall, concealing DB in wall, making good the disturbed surfaces and making all connections complete all as specified and directed. Make :- LEGRAND / SCHEINDER / L & T

S & F MCB SPN 20 to 32 Amps, 240 Volts, 50 Hz, 10 KA Breaking capacity. Make :- LEGRAND/ SCHEINDER/ L&T

S & F MCB SP 5 to 32 Amps, 240 Volts, 50 Hz, 10 KA Breaking capacity. Make :- LEGRAND/ SCHEINDER/ L&T

S & F MCB TPN 63 Amps, 415 Volts, 50 Hz, 16 KA Breaking capacity. Make :- LEGRAND/ SCHEINDER/ L&T

S&F single pole and neutral enclosure with a two pin and earth and metal clad plug socket complete with one single pole MCB 20 Amp 240 Volts complete all as specified including concealing in wall and directed. Make :- LEGRAND/ SCHEINDER/ L&T

M&L for sub main wiring with two single core 4.0 Sqmm PVC insulated FRLS multistranded flexible copper conductor cable 660/1100 volts grade down in through non metalic PVC casing caping with and including PVC insulated 4 Sqmm single core single strand copper conductor as continous earth wire in green colour connected to common earth dolly all as specified and as directed. (Make :- PRESFIT/ PRECISION - Casing caping), (Make :- FINOLEX/ KEI/ POLYCAB - PVC Copper wire) Note : 1. Two runs of cable, one run of earth wire, one run of PVC casing capping of 4.0 sqmm will be measured and paid one unit.

M&L for sub main wiring with two single core 6.0 Sqmm PVC insulated FRLS multistranded flexible copper conductor cable 660/1100 volts grade down in through non metalic PVC casing caping with and including PVC insulated 6 Sqmm single core single strand copper conductor as continous earth wire in green colour connected to common earth dolly all as specified and as directed. (Make :- PRESFIT/ PRECISION - Casing caping), (Make :- FINOLEX/ KEI/ POLYCAB - PVC Copper wire) Note : 1. Two runs of cable, one run of earth wire, one run of PVC casing capping will be measured and paid one unit.

M&L for sub main wiring with three single core 10.0 Sqmm PVC insulated FRLS multistranded flexible copper conductor cable 660/1100 volts grade down in through non metalic PVC casing caping with and including PVC insulated 10.00 Sqmm single core single strand copper conductor as continous earth wire in green colour connected to common earth dolly all as specified and as directed. (Make :- PRESFIT/ PRECISION - Casing caping), (Make :- FINOLEX/ KEI/ POLYCAB - PVC Copper wire) Note : 1. Three runs of cable, one run of earth wire, one run of PVC casing capping of 10.00 sqmm will be measured and paid one unit.

S & F building Security light fitting 35/36 Watt made up of pressure die cast alluminium body with mid power LED as lighting sources and PC cover having Top opening separate driver compartment with IP 65/66 protection and impact resistance of IK 07 including fixing arrangements and taking down old rusted bracket fittings complete all as per directed by Engr- in – charge. Make :- JAQUAR/ WIPRO/ PHILIPS/ BAJAJ

S & F in replacement of GI steel tubing medium grade 40 mm dia and length up to 1.5 meter bent to shape of offset angle upto 45degree for fixing of security /street light fittings including MS clamps made of 32mm x5mm flat iron, nuts , bolts, etc all as directed by Engineer in charge

M & L for Cutting holes into or through brick walls built in cement mortar for fixing the Exhaust fan and making good the distrubed surfaces in cement mortar 1:3 complete all as specified and directed.

M & L for Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised MS strip 32 x 6 mm by means of bolts, nuts, check nuts and washers all as shown in Electrical Plate No.3 connected to earthing test point all as specified or indicated including testing on completion.

S&F aluminium earth strip as roof/down/earth ontunity conductors of size 25mm x 4mm with saddles, insulators, screws, etc to / at any position / location of sheds/ buildings of height up to 5 meter complete all as specified and directed by the Engineer-in-charge Note -i) The quoted rate is deemed to inclusive of T & P/scaffolding/staging etc for executing the work in buildings of height up to 5 meter. ii) The rate is deemed to be inclusive of Procealin insulator, screws, Plugs

Taking down carefully including water servicing of outdoor & indoor which including cleaning of cooling coils, tightning of loose terminations and refixing of same Window and split type AC 1.5/2.0 TR and connected items complete all as specified and directed.

Supply and fix copper tube of size 1/4" bore including brazing etc with rubberised insulation and tape suitable for supply pipes for air conditioners complete all as specified and directed.

Supply and fix copper tube of size 5/8" bore including brazing etc with rubberised insulation and tape suitable for supply pipes for air conditioners complete all as specified and directed.

Supply and fix PVC drain pipe of size 5/8" bore for supply pipes for air conditioners complete all as specified and directed.

Supply and fix 4 core 2.5 sqmm PVC insulated FRLS multistranded flexible copper conductor cable 660/1100 volts grade ISI marked complete all as specified and directed.

Supply and fix Heavy duty Water Proof Powder coated mounting bracket for installation of outdoor unit of air condiioner made out of 2 mm thick high grade steel with suitable fastener, MS nuts, bolts M8 x 45mm, washer, bolt M8 x 30mm nut, bolts & washers etc. duly painted complete set all as specified and directed. Make :- Companion Sleek, Aircool Sales Corporation or equillant make.

Excavation in trenches not exceeding 1.50 m wide and n.exc 1.5 m in depth for foundation of poles, cable etc, not exc 10 sqm on plan and getting out in soft/loose soil including taking out brick protection etc complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm thick complete all as specified and directed.

Removing excavated materials (soils) not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed.

Cutting of existing GI pipe of size 25 mm dia and inserting GI tee/bend including all required new fittings complete with testing,all as specified and directed by engineer- in- charge.

Supply, lay/fix, connect and testing including taking down old unserviceable, rusted/wornout steel water tubing of 25 mm bore, medium grade, galvanised with screwed and socketed joints, in any length, including supply and fixing all fittings and fixtures, clamps and fixed to wall/ceiling or laid in trenches/floors complete all as specified and directed.

-ditto- all as per item No. 156 here in before but for 40 mm bore complete all as specified and directed.

S&F gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete of size 25 mm dia including taking down old unserviceable

M &L for valve pit of size up to 50 cm x 50 cm x 50 cm (internal diamension), stone/brick construction including all necessary excavation and earth work in any type of soil,returning,filling in disposal of surplus soil to a distance not exceeding 50m and depositing where directed,PCC in foundation for mix(1:2:4) type D2 brick mansonary in cement mortar(1:4) rendering 12mm duck in cement mortar(1:4) internally ,finished even and fair and polishing flush externally as the work proceeds in the same mortor.Mild steel angle iron 40 x40 x6 mm frame MS sheet cover 3.15mm thick with handle and locking arrangement,painting all exposed MS work with two coats of synthetic enamel paint over a cost of red oxide primer and painting all the MS embeded in PCC with two coats of black bitumenous paint complete all as specified.

M & L for sand cushioning by spreading in trenches crushed sand by gently by punning down manually as in cable protection all as specified and as directed by Engineer -in-charge.

Supply and laying un-reinforced precast concrete cable cover class LV, type-I, flat size 250 mm x 150 mm x 40 mm laid in trenches all as specified.

Supply and Laying or fixing or passing through pipe, XLPE/PVC insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 16 Sqmm 4 core including necessary connection and providing cable lugs as required all as specified.

M&L for earthing complete with Copper earth plate electrode 600cmx 600cmx 3.15mm buried directly in ground with top edge of the plate not less than 1.5 mtrs below normal gound level and connected to earth test point by means of GI Strip of size 32 x 6 mm all as specified and shown in electric plate No 3 of MES SSR Part-I 2009 including earthwork, PCC chamber, CI cover, protection and watering pipe, funnel, mesh etc all as required at site and all as directed and including taking down of old earthing materils. Note: (1). 7.5 RM Copper strip in deemed to be included in quoted rates beyond 7.5 RM strip shall be measured and paid separately (2). Earth resistance of earth pit should be less than 0.5 Ohms. On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost. (3) Rate quoted by the tenderer is deemed to include salt & Charcoal upto & above 450 mm top of Copper plate.

upply install, test and commissioning of Powder coated LT Feeder panel cubical Indoor type Channel mounted compartmentalized in construction all Confirming to IS 8623 Part 1 1993 CPRI approved as per CA factory fabricated made out of 2.0 mm thick CRCA sheet & suitable size to accomodate all accessories / fittings, to accommodate incoming MCCB and TPN Copper bus bars, incomer MCCB and outgoing MCCB, MCB, Contactors The TPN bus bars shall be insulated with colour coded heat shrinkable sleeve and shall be mounted on DMC/epoxy insulator. The bus bar shall have copper extension links for connecting with out going MCCB. The cubicle shall have a bottom channel & free standing frame made of angle iron of size not less than 40mm X 40mm X 6mm of A detachable predrilled gland plateof thickness not less than 2.0 mm thick powder coated should be used at the bottom for entry of armoured cable of adequate size with glands.The above panel shall be front & back openable lockable /openable by key from both side. The panel shall be Dust, vermin proof and powder coated of approved thickness complete including CTs, control wiring by 1.5Sqmm Wire and consisting the following, including taking down of old unsv panel after disconnecting Existing cables, Reconnecting the cables to new panels and including PCC foundation, excevation, grouting bolts.: Location:Main Security Complex Sewari a) Electrolyte Copper bus bar 200 Amps for 3 phase and Neutral. Make :- L&T/ Scheinder/ ABB b) MCCB FP 100 Amps 415 Volt 25 KA - 1 Nos for Incoming. Make :- L&T/ Scheinder/ ABB c) MCCB TPN 63 Amps, 25 KA 415 Volts- 2 Nos for Outgoing. Make :- L&T/ Scheinder/ ABB d) MCB SPN 40 Amps, 10 KA 230 Volts - 2 Nos e) Digital Ameter -01 No. Make :- AEI/ L&T f) Digital Volt Meter - 01 No. Make :- AEI/ L&T g) RYB Indicators - 1 Set. Make :- AEI/ L&T Make of Panel Manufacturer :- M/S Universal Switch Gear Control

S&F in repairs Framed work as in doors or gates of angle or other section with gusset plates,rails, braces, etc. complete drilled for fixing of steel sheeting or other covering Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging: also fastening and fixing complete

S&F in repairs 1.0mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched: including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams,including bending or turning up, mitred angles,etc.as required. Note : A sum of Rs56,405.50 towards sch of credit shall be deducted to arrive the contract sum.

Parmatma Enterprises

M/s Mohd Altaf Hanif Qureshi

sahajanand const co.

HINDUSTAN BUILDERS

AM ENTERPRISES

industrial suppliers

M/S KHUSHI ENTERPRISES