Repairs and Renovation of Arulmigu Bramapureeswarar Temple at Engan Village in Thiruvarur Taluk and District

Amount

Scaffolding charges for Vimanams/ Gopurams with casuarinas posts coconut or palm trees wherever necessary for main form work and providing with non flammed shade. Providing ladder arrangements country wood plank for working inspection etc, complete hire charges only errection maintenance and removing the same on completion of the work

Vimanam/Gopuram upto 15’0” height

Vimanam/Gopuram upto 25’0” height

Scraping the decayed lime plaster from the surface of Vimanam carefully including isolated bricks of brick work without damaging the varivargam racking out the joints, cleaning the surface with water, including all working in heights, hire charges for special tools, brushes etc complete . Vimanam/Gopuram upto 50’0” height

Brick masonry L.M 1:2 using Stock bricks including all Varivargams, moulds thambams, mukapathrams,koodu,nasi and all ornamental brick work complete, all pancharams, agarais, karnakoodus, etc, forming core walls of Rajagopuram/Vimanams complete including cost and conveyance of all materials including Lime, all the labour charges including marking pathies shaping of the bricks, lifting of all the materials to required heights,curing and all extra for working in height etc complete. Vimanam/Gopuram upto 25’0” height

Providing Vargapoochu over the corewalls of Vimanams /Gopuram,with Lime mortar 1:1.5 complete including shaping the mukhapathram, mahanasi, koodu all ornamental work to proper shape by embedding broken bricks of shaped /chiselled bricks, rough plastering with lime mortar1:1.5 and finishing with final ornamental plastering and nayam theervai including cost and conveyance of all material labour there of, lifting of materials, all working in height, curing with water etc, complete including all extra for folding and including clearing from the Vimanams/Gopurams.

Vimanam/Gopuram upto 15’0” height

Vimanam/Gopuram upto 25’0” height

Painting with multicolour (panchavarnam ) good water based exterior emulsion paints complete for the Vimanams / Gopuram, including cost and conveyance of all material, labour charges including artist painter,working in height, lifting of material, cost of brushes etc, complete-which including all extra for folding.

Vimanam/Gopuram upto 15’0” height

Vimanam/Gopuram upto 25’0” height

Providing New Sudhai vigrahams in Vimanam / Gopuram of heads ,hands,weapons, body and legs shaping the core with broken bricks set in Lime mortar 1:1.5 finishing the same with Lime mortar 1:1.5 bringing to the correct shape ( Lakshna ) in conformist with silpa sastra inclusive of special cost and conveyance of all materials, such as lime broken bricks all labour for working in heights,curing lifting of materials etc,. complete

Sudhai size Above 1’0” upto 2’6”

Sudhai size Above 2’6” upto 3’6”

Labour charges for removing the existing cutstone structure including numbering all labour charges, hire for all tools and plants for employed, scaffolding charges, handling charges, hoisting and stacking them in places shown by the departmental officers etc complete as per standard specifications

Labour charges for dressing charges for the existing cut stone flooring slab including Hire charges for special Tools etc complete.

Supply of cutstone for carrying ot garbagraham, arthamandapam, mahamandapam, thirumadhil wall and other temple structure upto 10 feet length

Labour charges for cut stone varivargams for kalkaram excluding cost and conveyence of stone from quarry but including all labour charges for tools and plants for 3 line dressing, scaffolding charges, handling charges, hoisting and fixing in position etc., complete

Prasthiram

Istambavaragam

Adhistanam

Upapeetam

Inner Course

Labour charges for refixing the existing cutstone structure including numbering all labour charges, hire for all tools and plants for employed, scaffolding charges, handling charges, hoisting and stacking them in places with lime mortar 1:2 shown by the departmental officers etc copmplete as per standard specifications

Clean removal of lime plaster from walls and racking out the joints 20 mm deep and from open terrace racking out the joints 12 mm deep etc complete.

Plastering with Lime mortar 1:2, 12 mm thick including cost and conveyance of all materials and labour charges curing etc, complete.

Providing water wash with appropriate methodology to reatore the orgainalities of the existing granite structure inclusive necessary scaffolding charges, conveyance of hire charges for all tools and plants and final clearing the site after completion of work etc complete

Pointing the cut stone Masonary work with Lime Mortor 1:1.5 (one part of lime and one and half part of sand) excluding cost and conveyance of cut stone but including cost of special tools such as brush and watering, curing etc complete, as per standard specification.

Dismantling clearing away and carefully stacking materials useful for reuse one Course of terrace bricks finish in cement mortar.

Best terrace flooring with brick on edge 75mm thick brick jelly concrete in Lime mortar and 12 mm thick Lime plastering 1:2 to top and bottom etc, complete.

Dismantling clearing away and carefully stacking materials useful for reuse brick/stone masonry in lime mortar walls under 3 m high.

Earth work excavation for foundation in all soils and sub soils and to full depth as directed except in rock requiring blasting inclusive of shoring shuttering,bailingout water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2mts and clearing and leveling the site etc complete.

Supplying and filling in foundation in basement with filling Sand in layers of 150 mm thickness well watered rammed and consolidated complying with relevant standard specification. including cost of supplying filling Sand.

Cement Concrete 1:5:10 ( one of cement, five of sand and ten of HBG Jelly ) for foundation using 40mm gauge HBG Jelly inclusive of shoring, strutting and baling out water wherever necessary ramming curing etc.,complete as per standard specification and as directed by the dept officers.

Boring, Providing and installing cast in situ sigle under reamed piles of specific diametre and length below pile cap in standardized concrete mix M-20 grade in accordance with IS 456 2000 using 20 mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m and maximum water cement ratio of 0.55, including admixture (plasticizer/super plasticier) in recommended proportions as per IS -9103 to accelerate,rated setting of concrete improve workability without imparing strength and durability without (5 cum) 7730 kg, of 20 mm machine crushed stone jelly and with about (3.30 cm) 5156 kg, of 10-12 mm machine pressed stone jelly and with about (4.79 cm ) 7670kg of sand

Providing and laying in position standardized concrete mix M-20 grade in accordance with IS 456 2000 using 20 mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticizer/super plasticier) in recommended proportions as per IS -9103 to accelerate,rated setting of concrete improve workability without imparing strength and durability without (5 cum) 7730 kg, of 20 mm machine crushed stone jelly and with about (3.30 cm) 5156 kg, of 10-12 mm machine pressed stone jelly and with about (4.79 cm ) 7670 kg of sand, but excluding reinforcement grill and fabricating charges, centering and shuttering and also including laying,vibrating with mechanical vibrators,finishing, curing etc., and providing fixtures like fan clamps in the RCC floor/roof slabs wherever necessary without clamping etc., complete as per the standard specification and as directed by the departmental officers. The coarse and fine aggregate to be used should comply with the requirements of IS standards(No separate payment will made by the department for the excess usage of materials)

Supplying and fabricating and placing in position of Steel RTS and M.S for reinforcement works including cleaning the rest, cutting, bending and tying with grills and cost of Binding wire charges including steel purchase by the contractor as per approved design etc complete.

Supplying and fabricating and placing in position of Steel RTS and M.S for reinforcement works including cleaning the rest, cutting, bending and tying with grills and cost of Binding wire charges including steel purchase by the contractor as per approved design etc complete.

Brick work in cement mortar 1:5 using III class country bricks of size 8¾”x4¼” x 2 ¾ ” including cost and conveyance of all materials and labour charges and all other incidental charge etc complete.

Temple Pattern Ornamental Doors with high quality teakwood (country) with 2”minimum to 7” maximam thick ornamental frames, 2” thick to 5” thick kamala (flower planks) creeper, Birds, animal figures, sculptures etc. Back side 1”thick to 3” plank including necessary carving, shaping, wastage etc, as per approval plan and design

Painting two coats of newly plastered wall surface with water based Interior emulsion paint of approved first quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt,including necessary plaster of paris putty, wherever required etc, complete as per specification.

Best Varnish two coats for wood works etc., complete complying with standard specifications

Clean removal of old paint from the surface of Wooden door and Best Varnish two coats for wood works in all floors the rates is to include cost of all materials brushes scaffolding changes etc complete.

Wiring with 2 of 1.5 sq.mm ( 22/0.3 ) PVC insulated unsheathed SC copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with TWswitch box and 5A FTswitch in flush with wall with 3mm thick hylam sheet cover for making good of the concealed portion with suitable colour for PVC concealed light point / fan point (for electronic regulator )

Wiring with 2 of 1.5 sq.mm ( 22/0.3 ) PVC insulated unsheathed SC copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVCaccessories with 150x100x113mm TW switch box with 3mm thick hylam sheet cover for 5A 3 pin non inter locking CSplug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for PVC plug point.

Supplying and run of 2 of 1.5 sq.mm (22/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in 25 mm dia GI pipe(class B)suitably bend at both ends with necessary angle iron up right and end supports for mains.

Supply and fixing of single box type 4’40W flu.Fitting complete with copperchoke and condensor with conduit pipe suspension from the ceiling with PVC unsheathed copper leads from terminals to the fitting with tube.

Supplying and fixing of 4’40 w twin street light flu fittings complete with copper chokes and condencer with 32mm dia GI pipes(class B)with 1 no. 32mm GI bend complete on the existing post/wall with 16A aerial fuseunit on MSplate with PVC unsheathed copper leads MSclamps and aluminium painting with flutubes.

Supplying and fixing of fancy glass shade and 11 w CFL for BH point.

Supplying and fixing of 5 A 3 pin and 2 pin combined flush type wall socket with 5 A flush type switch on suitable TW box

Supplying and fixing of 1200 mm ( 48”) AC ceiling fan complete with stepped electronic 300 W regulator and with 1 metre down rod on the existing clamps.

Supplying and fixing 16Amps TPN metal clad with suitable angle iron frame work with cable entry boxes for PWD eartihing

Supplying and fixing of TNEB metre board suitable for 32 A, three phase servi ce connection with 3 nos. 32A fuse unit ( 500V ) 32A neutral link and earth link ( 1” x 1/8” copper flat ) on TW plank of size 600mmx450mmx19mm with supporting TW reepers of 1” thick on either side with painting with suitable bolt and nuts for fixing the TW plant on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit.

Add GST 18%

Nagarajan Construction Company Pvt Ltd (BID ID -1529687)