Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.3 LAccepted-AOC SA 15 144 S 1 CHANDAN HERITAGE HAVELIA CHAURAHA SARNATH VARANASI U P 221007 | VARANASI | VARANASI | UTTAR PRADESH | 221007 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹29.8 L+₹2.4 L (8.83%)Rejected-Finance 11 1 7 P D KYDGANJ PRAYAGRAJ U P PIN 211003 | PRAYAGRAJ | UTTAR PRADESH | 211003 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹30.9 L+₹3.5 L (12.7%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹36.9 L+₹9.5 L (34.6%)Rejected-Finance | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹39.2 L+₹11.8 L (42.9%)Rejected-Finance | L5 | Rejected-Finance Other than lowest |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
26 Jan 2024, 6:00 pmClosed
GE(AF) GORAKHPUR
GE(AF) GORAKHPUR
REPAIR/ MAINT OF STREET LIGHT, HIGH MAST LIGHT, GATE LIGHT AND GARDEN LIGHT AT AF STN GORAKHPUR
2023_MES_634738_1
9120/E8
Open Tender
Electrical and Maintenance Works
Item Rate
330 days
GE(AF) GORAKHPUR
Class D cat b i
8 documents required · 8 mandatory
₹500
Yes
GE(AF) GORAKHPUR
₹98,000
Yes
12 Feb 2024
28 Dec 2023
29 Jan 2024
28 Dec 2023
26 Jan 2024
12 Jan 2024
28 Dec 2023 - 6 Jan 2024
Amount
Labour only for checking the serviceability of the different spares / components / parts of security/street light/Flood light fittings on pole/wall any wattage/capacity of any description and in any position with the help of one Electrician and one helper , replacement of un-serviceable/damaged/ broken part(s) either in single or in combination, re-assembling the fittings and making the light fittings serviceable, fixing the fittings in new or old position, connecting to electric supply and its testing on installation complete all as specified and directed. Note :- (a) The rate quoted by the contractor for Each Job is deemed to be included consisting of minimum 3 complaints. (b) The contractor or his representative will take complaint from MES complaint Register through MES job card (c) The contractor will made seprate items register with location and signature of user (d) The contractor will maintan complete detail of JOB card and items involved with date and user signature (e) The ladder and T&P as required will be provided by the contractor (f) Risk factor will be the contractor's end (g) Material will be measured and paid separately in the relevant item here after.
M&L for repair of LED street / flood light fitting of any make 30 to 100 watt including replacement of power driver, soldering and testing complete all as directed. (Note:- Cost of power driver is deemed to included in rate quoted)Make: Havells /Wipro/Philips/Shakti
Disconnecting and taking out old unserviceable light fitting’s bracket incl FI clamps of any description and in any position and supplying and fixing brackets made out of 40/50mm dia medium grade GI pipe 0.75 mtr long bent to shape and size fixed on location using new 2 nosx 30x5mm FI clamps made to shape incl nuts,bolts & washers complete all as specified and directed .
Disconnecting and taking out old existing unserviceable junction box and S&F in position new sheet moulding compound (SMC) junction boxes of size 450mmX450mmX150mm depth made out of 1.8mm thick CRCA sheet with front side hinged opening having rubber linking & locking arrangement with nut and bolt and arrangement for incoming and outgoing cable and wire. The box shall provided with and including 4 Nos, 100 Amps aluminum bus bar mounted on porcelain insulators including connecting the bus bars to cables with using suitable GI nut, bolts and washers and aluminum lugs etc fixed on pole using 30x5mm FI round clamps, nuts, bolts & washers and Provn of cable from bus bar to MCB and 1 MCB 5 to 32 AMP including two coat of synthetic enamel paint over a cot of red oxide primer complete all as specified and directed.
Disconnecting and taking out old existing unserviceable street light fitting of any description and Supply & fixing Street light fitting IP-66 powder coated pressure die cast aluminium housing with high power LED as lighting source with heat resistant toughtened glass 70 W LED with 10kv surge protection complete with all assessaries of capacity 70 watt. Make-Havells cat part No. ENDURACITYLINERNEOSL70WLED757PASYBOTG or equivalent Make: Wipro/Philips/Shakti
M&L for machine spray painting of the under mentioned LT Panel by rubbing, scraping of old paints with emery paper, cleaning and preparation of smooth surfaces complete including writing INCOMING/OUTGOING,LOCATION etc with approved quality paint all as specified and directed by Engineer – in – Charge.
Disconnecting and taking out old existing unserviceable street light fitting of any description and Supply & fixing Street light fitting IP-66 powder coated pressure die cast aluminium housing with high power LED as lighting source with heat resistant toughtened glass 45 W LED with 10kv surge protection complete with all assessaries of capacity 45 watt. Make-Havells cat part No. ENDURAAPEARLNEOSL45WLED757PASYTOPC. or equivalent Make: Wipro/Philips/Shakti
Disconnecting and taking out old existing unserviceable flood light fitting of any description and supplying & Fixing, testing energy saving, die cast aluminium housing IP 65 protection,50 W LED flood light fitting with high power LED as light source complete fixed on pole using 30x5mm FI clamps,nuts,bolts & washers all as per site requirement and as directed. Make- Havells cat part No. JETAQUANTOPLUSFLP50WLED757SYMLENS or equivalent Make: /Wipro/Philips/Shakti
Disconnecting and taking out old existing unserviceable swivel type light fitting of any description and supplying & Fixing, testing energy saving, die cast aluminium housing ,pur white ,warm white IP 65 protection,300 W LED light fitting with high power LED as light source complete fixed onrevolving search light stand for watch tower with clamps,nuts,bolts & washers all as per site requirement and as directed. Make- Make: Havells /Wipro/Philips/Shakti
Disconnecting and taking out old existing unserviceable flood light fitting of any description and supplying & Fixing, testing energy saving, die cast aluminium housing IP 65 protection,200 W LED flood light fitting with high power LED as light source complete fixed on pole using 30x5mm FI clamps,nuts,bolts & washers all as per site requirement and as directed. Make- Havells cat part No. JETAVALOURHB200WLED757PINTWBLTG. or equivalent Make: /Wipro/Philips/Shakti
Disconnecting and taking down old UNSV timer and Supplying and fixing Automatic Timer switch which switches ON/OFF the street lights based on LUX level of natural light ranges from less than 30 LUX and More Than 10 LUX of capacity 8 KW Three phase, 220V contactor rating 40A,incoming-outgoing MCB rating 40A having over voltage and under volttage protection all as specified and directed. complete all as specified and directed at site.
Supply and fix in repair Intergral LED Post-Top Luminaire 40 W Comprises housing with LEDs and driver. Glare-free and better uniformity and Heat resistant toughened glass with frame suitably gasketed for IP 65 Class I protection including all accessories, all as specified and directed.Make: Crompton greaves, Model- Maple, Cat part No: LPTO-40-CDL or equivalent Make of Wipro/Philips/Shakti.
S&F New LED Bollard light(Garden Light) 9 Watt,single phase,240 Volts with 9 watt LED lamp opal diffuser & aluminium reflector .Make of Havells cat part no-BAMBOOBLS8WLED830PSYMTOPC(0.6M)or equivalent CG/Bajaj/ Philips
Dismentaling of Old worn out aviation obstruction light and S&F testing new obstruction aviation light, LED type casing made from pressure die costing of aluminium alloy LM -6 ,polycorbonate lane to protct LEDS ,IP-65 protection ,operating temperature/voltage 10 C to+60 C, 80 volt AC single dome type IEC-61000-6-4 -2001/BS 800 make :Instapower patent No 212550 or equivalent make in Philips/Bajaj complete all as specified and directed .
Supply and laying weather proof cable 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sq. mm 2 core nominal cross section in service connections
Dismantling old damaged pole and Supply and errecting Steel tubular swaged poles complete with cast iron base plate, final taper plug, bolts, nuts and screws as specified type 410 SP-22 and 8.5 mtr long complete all as specified and directed.
Disconnecting all electrical connection and taking down carefully existing unserviceable Hanger light fitting of any description and in any position from hanger and Supplying & Fixing, circular LED Highbay with tapered fin design and excellent thermal management along with IP 66 protection , pressure die cast ,environment friendly, High bay light fitting (WB) with high power 120W LED light complete all as specified. Make: Havells /Wipro/Philips/Shakti
M & L for lowering down highmast light assembly from pole disconnecting UNSV highmast light fitting and again lifting up highmast light assembly carefully of any type/height after repair/replacement of highmast lights or submain wiring complete all as specified and directed.(NOTE: Highmast light fitting and Submain wiring will be measured and paid saperately)
S&F(in repair) LED Highmast light fitting of capacity 400 watt energy saving, environment friendly, long life, exclusive innovative die-cast aluminium IP66 flood light suitable for highlighting architectural façade and general purpose lighting (Highmast) complete with operating voltage 10 degree centigrade to 50 degree centigrade with operating voltage range 140 volt to 270 volt and serge protection upto 10KV with inbuilt SPD complete all as specified and directed. Make: Havells /Wipro/Philips/Shakti
S&F inreplacement of UNSV with new flame proof, weather proof LED 2x20 watt alloy in LM6, wire guard and reflector and IP 65 protection complete fixed/hang properly as directed. Make : Crompton. CAT PART NO: EXTN2LT8-16/20. or equivalent Make: /Wipro/Philips/Shakti
Supply and laying in replacement in trenches /laid in floor/road/duct/drawn through conduit XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electric cable 1100V grade with aluminum conductor of cross sectional area 10 Sqmmx4 Core complete all as specified and directed .
All as per item above but of size 16 sqmm 4 core.
All as per item above but of size 400 sqmm 3.5 core.
All as per item above but of size 120 sqmm 3.5 core.
All as per item above but of size 95 sqmm 3.5 core.
Supply & fixing in replacement PVC insulated and sheathed unarmoured two core copper conductor cable 1.5 sqmm 1100 volt to be replaced in existing fittings complete all as specified and directed .
Excavation in trenches not. exc.1.5m wide and not exc.1.5 deep and getting out in soft/loose soil complete all as specified and directed.
Returning, filling in, including spreading, watering and well ramming in layers not exc 25cm in soft/loose soil.complete all as specified and directed.
Removing surplus soil to a distance not exc 50m and depositing where directed at a level not exc. 1.5m above the starting point.complete all as specified and directed
Material and labour for sand cushioning for under ground cable with locally available sand for protection of cable including spreading and consolidations, complete all as specified and directed.
Supply and laying in trenches dry well burnt locally available sub class “B” bricks over sand cushioning for protection of cable complete all as per specified and directed.
Material & Labour for PCC 1:3:6 type D2 using 40mm graded stone aggregate as in foundation, filling and mass concrete of poles/stay assembly/ panels etc.
Material & Labour for PCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in form work/coping of poles.
Material and labour for 50 mm dia galvanized iron tube light grade for cable protection, supporting to poles, plinth protections, road crossing, trenches, footpath etc, incl taking out old pipe complete all as specified and directed including clamps, nut bolt and washers.
M&L for Boring under road /foot path upto 1.5 mtr depth for inserting of 40/50 mm dia GI tubing for drawing UG cable by manual or mechanical complete all as specified and directed.
Dismantling old damaged pole and Supply and errecting cast aluminium heavy pole designer LEG and broader designer base finished with polyurethane paint (with prior treatments).diameter of one leg is approx 76 mm .outer dia for spigot entry 60 mm. 03 nos,"T shaped bolts with nuts & washers provided for concrete foundation.total lenght of pole including base and legs (base with plate X04 nos legs ) is 3100 mm(10 feet 2 inches) with fully cast aluminium finished with polyuethane paint (with prior treatments)with square junction with max projection breadth of 625 mm. suitable for two nos of post top lanterns.total lenght of PTL 150 is 933 mm & max breadth 323 mm.B22 brass holder provided withaluminium cover .spigot entry 78 mm/90 mm including 50 watt led bulb and PCC foundation with nut and bolts for fixing of pole complete all as specified and directed.Cat part no-MCPL-07 +CDPB-05 +PTL-150 of Mepro or equivalent make as approved by the GE.
M/S Akhilesh Enterprises
Unitech India
Yaduvanshi Traders
Hindustan Power Corporation
SINHA ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .