Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.5 LAccepted-AOC | L1 | Accepted-AOC Reasonable rate | |
| 2 | L2₹47.9 L+₹1.2 L (2.55%)Rejected-AOC | L2 | Rejected-AOC Quoted amount are higher than L1 | |
| 3 | L3₹48.0 L+₹1.3 L (2.86%)Rejected-AOC | L3 | Rejected-AOC Quoted amount are higher than L1 | |
| 4 | L4₹48.2 L+₹1.5 L (3.22%)Rejected-AOC | L4 | Rejected-AOC Quoted amount are higher than L1 | |
| 5 | L5₹48.5 L+₹1.8 L (3.87%)Rejected-AOC | L5 | Rejected-AOC Quoted amount are higher than L1 |
Tender Value
₹46.6 L
EMD Value
₹93,260
Closing Date
3 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 868 EWS
GE 868 EWS PIN- 913 868 C/o 99 APO
SPL REPAIR TO BLDG NO OPT432 AND OPT433 IN MH PROVN OF FALSE CEILING AND FLOOR TILING IN BLDG NO P502 OF 3 CORPS PRO UNIT AND ADDN ALT TO BLDG NO T25 IN MH BLDG NO T27 AT BSO YARD BLDG NO T24 SHAURYA MESS UNDER AGE BR II AT RMS
2023_MES_609286_1
8560/C/E8
Open Tender
Civil Works
Item Rate
180 days
RANGAPAHAR
Class D, Category a(i)
2 documents required · 2 mandatory
₹500
GE 868 EWS
₹93,260
12 Sept 2023
15 Jul 2023
5 Aug 2023
15 Jul 2023
3 Aug 2023
29 Jul 2023
15 Jul 2023 - 21 Jul 2023
Amount
Dismantling plain or corrugated steel sheeting, any gauge, thickness,including Nanital or similar pattern roof covering etc complete all as specified and as directed.
Dismantling wall and ceiling boards (fibre pulp insulation etc) or insulation boards, slabs, blankets any thickness, incl cover fillets etc complete all as specified and as directed.
Dismantling boarding any description fixed in any position with nails etc complete all as specified and as directed.
Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises etc complete all as specified and as directed.
Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) etc complete all as specified and as directed.
Taking down Chowkhats or frames not exc. 1.5 sq. m each but with shutters (without taking off shutters from the frames) etc complete all as specified and as directed.
Taking down chowkats or frames with shutters with exc. 1.5 Sqm but n.exc. 4 Sqm each (without taking of shutters from the frames) complete all as specified and as directed.
Taking down shutters of any description exc 1 sqm but not exc 2.00 Sqm each etc complete all as specified and as directed.
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quions, arches, pillers etc complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and as directed.
Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for etc complete all as specified and as directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for etc complete all as specified and as directed.
Taking up or down 20mm dia steel tubing and connections, etc complete all as specified and as directed.
Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for Key, scrubbing down with water etc complete all as specified and as directed.
Dismantling of frame work timber scantling 40 Sq cm and over in section in any position etc complete all as specified and as directed.
M&L for 2nd class hard wood, clean sawn, in scantling timber frame and fixed with nails etc complete all as specified and as directed.
M&L for PCC (1:4:8) type D-2 using 40 mm graded stone aggregate in foundation, filling and mass concrete etc complete all as specified and as directed.
S&F pre-painted galvalume aluminium zinc coating GI based semi corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws etc complete all as specified and as directed.
All as per Item No-19 here-in-before but except sheets .
All as per Item No-19 here-in-before but plain sheet as in ridges, roof covering or in cladding etc.
S & F for 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) pre-Painted self embossed, textured designer board E-Board Classic to be fixed GI powder coated grid/section size 600mmx600mm with main runner 38x24x0.9mm thick ,cross tee 28.6x24x0.9 mm and wall angle 19x19xo.9 mm duly suspended with 4mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size etc complete all as specified and as directed.
S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications etc complete all as specified and as directed.
S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification etc complete all as specified and as directed.
M & L for PCC (1:2:4) type B2 (using 40mm graded stone aggregate) 25 mm thick as in sub base to receive tiles finishing cement concrete surface even and smooth without using extra cement etc complete all as specified and as directed.
M&L for dark shade Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed of 15 mm thick in CM (1:6) etc complete all as specified and as directed.
All as per Item No-26 here-in-above but in vertical surfaces such as skirting over backing coat of 10 mm thick in CM (1:4).
M&L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles laid over backing coat of 10 mm thick in CM (1:4) etc complete all as specified and as directed.
M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed of 15 mm thick (1:6) etc complete all as specified and as directed.
All as per Item No-26 here-in-above but but in skirting over and including 10mm thick backing coat in CM (1:4).
M&L for Machine cut kota stone slab flooring 20-25mm thick laid over cement screed base and jointed with grey cement slurry mixed with pigment to match the shade of the slab, rubbing and mirror polishing laid over and including 15mm thick screed bed or bedding layer in (1:4) CM complete all as specified as directed
All as per Item No-26 here-in-above but but in vertical surfaces laid over 15mm thick backing coat in CM(1:4) .
M&L for Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and laid over and including in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc complete all as specified and as directed.
M&L Pressed steel frames(1.25 mm thick MS sheet) for doors of size 125 x 65 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed.
M&L Flush shutters factory made 35mm thick , solid core construction, with partical board core and plywood face panels, commercial type on both sides etc complete all as specified and as directed.
M&L Glazed and skeleton shutters factory made 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats etc complete all as specified and as directed.
S&F 100mm long Butt hinges, medium weight, cold rolled mild steel, and fixed etc complete all as specified and as directed.
Supply and fixing 75mm size mild steel butt hinges, medium weight, cold rolled complete all as specified and as directed.
S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples etc complete all as specified and as directed.
All as per Item No-39 here-in-before but in repairs.
S&F 200 mm long aluminium anodised, barrel tower bolt of extruded sections etc complete all as specified and as directed.
S & F Aluminium anodized, barrel tower bolts, 150mm long of extruded section etc complete all as specified and as directed.
S&F 150mm long aluminium alloy handled, fabricated type anodised etc complete all as specified and as directed.
Supply and fixing 100mm long extruded aluminium alloy handles, fabricated type, anodised etc complete all as specified and as directed.
M&L for preparation of new wooden surface exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed.
M&L for preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed etc complete all as specified and as directed.
M&L for brick work with sub class 'B' bricks old size straight or curved on plan exc 6m mean radius built in CM (1:6) etc complete all as specified and as directed.
All as per Item No-48 here-in-before but in half brick thick wall built in CM 1:4 .
M&L for Rendering 15mm thick cement plaster in CM (1:6) on brick work/concrete surfaces, finished even and fair without using extra cement etc complete all as specified and as directed.
M&L for rendering 15 mm thick cement plaster in CM 1:4 on brick work/concrete surfaces finished even and fair using WPC @ 3% by weight of cement content and without using extra cement etc complete all as specified and as directed. Note:-WPC will be measured and paid separately.
M&L for PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in coping, back filling, bed plates including necessary formwork etc complete all as specified and as directed.
M&L for RCC (1:1.5:3) Type A-1, using 20mm graded stone aggregate , Nominal mix as in plinth beams, lintel, lintel band and gable beams etc including formwork etc complete all as specified and as directed.
M&L for TMT steel bars 10 mm dia and above, as in reinforcement for concrete, cut to length, bent to shape required including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm etc complete all as specified and as directed.
All as per Item No-54 here-in-before but above 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders etc complete all as specified and as directed.
S&F Anodised aluminium powder coated ( minimum thickness of powder coationg 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.
S&F for providing sliding type (3 Track +3 shutter) aluminium windows, section profiles of aluminium as per sketch No SK/2019/01 dated 21/01/19, aluminium alloy extruded sections conforming to HE 9-WP of BIS 733 and HP 9 -WP of BIS 1285 as amended, with minimum thickness of frames (outer bottom, Top & side ) 1.5mm and sliding sash (stiles & rails) of minimum thickness 1.2 mm. The windows shall be procured from a BIS license factory manufactoring windows to BIS-1948, The EPDM gaskets, rollers, recessed handles cum locks aluminium snap beading for receving glass/wiremesh with stainlss steel screws shall b provided with windows. The aluminium extruded section shall be of make Jindal/Hindalco/Alom extrusions etc all as listed. Note:- Glazing and Stainless steel wire mesh will be paid seperately etc complete all as specified and as directed.
S&F Anodised aluminium door shutter, aluminium section weighing 0.55 kg/m inluding necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and as directed.
S&F Floor door stopper of aluminium alloy body and tounge, anodised, with hard drawn steel spring , fixed in floor , overall length of cover plate 140mm etc complete all as specified and as directed.
S&F Sheet glass ordinary quality 4.8 mm thick and glazing in aluminum door in squares exc 0.5 sqm each etc complete all as specified and as directed.
M&L for PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in coping, back filling, bed plates including necessary formwork etc complete all as specified and as directed.
Material and labour for PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in surface channel and like etc complete all as specified and as directed.
M&L for plain cement concrete (1:3:6) type C1 using 20mm graded crushed stone aggregate as in roof kerb etc complete all as specified and as directed.
S&F for joist, channels, angles, or tee sections, fixed independently, without connecting plates, etc, (cut to ordinary lenght i.e. Within 20mm of the lenght indicated conforming Fe-410-W (Gde E-250 quality -A) etc complete all as specified and as directed.
S&F Rolled sections as in roof truss, purlins including cleats GDE Fe 410-0-or Fe 310-0 etc complete all as specified and as directed.
M&L for rolled sections as in framing for clazing and the like fixed with angles cleats and connecting plates with timber foer eaves board complete all as specified and as directed.
S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240 etc complete all as specified and as directed.
S&F plates (plain or chequered) channels. Square cut or notched ) (ordinary and counter sunk) forming holes, without any attachment, Fe 410-W etc complete all as specified and as directed.
S&F bands, straps or stays , plain angle cleats or flat irons cleats or securing purlins to wooden trusses or rafters, knee pieces and similar small articales etc conformings to Fe-290 Grade E-165 etc complete all as specified and as directed.
S&F mild steel bolts, purpose made, with hexagonal or square head one end and screwed the other end to be fitted with washer and one hexagonal or squre nut n exc 15cm long 12mm dia etc complete all as specified and as directed.
M&L for 3 mm thick Birla white putty/JK white wall care putty on walls etc complete all as specified and as directed.
M&L for Two coats of OBD on new plastered surfaces of walls over a coat of primer including preparation of newly plastered surfaces etc complete all as specified and as directed.
M&L for Two coats of Cement base paints on new plastered surfaces of walls over a coat of primer including preparation of newly plastered surfaces etc complete all as specified and as directed.
M&L for preparation of old plastered or unplastered surfaces of external wall by brooming down with steel wire brushing and applying one coat of cement base paint on external wall surfaces etc complete all as specified and as directed.
M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mitred /stopped ends etc complete all as specified and as directed.
M/L for 75 mm thick PCC 1:3:6 type C2 , using 40 mm graded agg in plinth protection/aprons/path laid to slope of 1:12, finished fair and even without using extra cement with and including all necessary formwork to divide tha area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 10 mm wide joints throughout thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed.
M&L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in cills, copings, benching on chajjas, roof kerbs, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work etc complete all as specified and as directed.
S&F in replacement of 500 ltr capacity rotational moulded polythylene water storage tanks (cylindrical, vertical with closed top ),double layer including 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms), all specified in SSR Part-I etc complete all as specified and as directed.
S&F rotational moulded polyethylene 1000 Ltrs Capacity water storage tanks (cylindrical vertical with closed top) double layer hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia etc complete all as specified and as directed.
M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any des-cription, over 10cm in width or girth, not otherwise described etc complete all as specified and as directed.
All as per Item No-81 here-in-before but applying one coat of synthetic enamel paint on old steel surface.
M&L for grinding to kota stone in three coats and final coat as mirror polishing to existing kota stone complete all as specified and as directed
S&F 20mm Tubes, 'medium grade', galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.
S&F in repair vitreous china wash basin, white, flat back, size 550 x 400 mm make : prayag (cat no 4645) or equivalent model as approved by Engr-in-Charge etc complete all as specified and as directed.
S&F in repairs 15mm bore Pillar taps, fancy type cast copper alloy, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed etc complete all as specified and as directed.
M&L for PCC 100mm thick,(1:3:6) type C-2 using 40mm graded stone aggregate as in sub base etc complete all as specified and as directed.
M&L for Coloured chequered cement concrete tiles of 20cmx20cmx25mm thick set jointed and pointed in neat sement slurry in floors laid over and including 15 mm thick screed bed in CM (1:6) etc complete all as specified and as directed.
Supply only waterproofing compound etc complete all as specified and as directed.
S&F 18/19 mm thick Prelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminations fixed with screws to aluminium frame work etc complete all as specified and as directed.
S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless stell cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed etc complete all as specified and as directed.
S&F 4 levers brass mortices lock, vertical type, size 100mm etc complete all as specified and as directed.
S&F Aluminium (Die cast) body , Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60kg and fixed etc complete all as specified and as directed.
S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm etc complete all as specified and as directed.
S&F steel rolling shutters of lath thickness 1.25 mm , gear operated type with bevel gear box and crank handles area exceeding 8 sqm each all as specified including top cover, anchoring rod, hasp & staple including cutting and removing the existing corroded laths of rolling shutters and inserting new laths of 1.25 mm thick including necessary bending , revetting etc with one shop coat of red oxide zinc chromate primer etc complete all as specified and as directed.
Taking up or down steel tubing 15mm bore and connections etc complete all as specified and as directed.
Supply and fix 15mm bore galvanised steel water tubing medium grade including all fittings and fixed complete to walls/ceiling or laid in floors etc complete all as specified and as directed.
Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in any type of Soil etc complete all as specified and as directed.
M & L in repair 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.
M & L repair for 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.
M & L in repair 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in floor/trench complete all as specified and directed.
M & L repair for 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in floor/trench complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils etc complete all as specified and as directed.
Removing Excavated soils not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point etc complete all as specified and as directed.
Easing of door/windows shutters for easy closing or opening leaf tightening of hinges or changing the position of hinges adjustment of tower bolt, sliding bolt etc complete all as specified and as directed.
M&L for fixing 2 mm thick anodised aluminium composite panel fixed in aluminium frame including necessary rubber beading, jointing cleats etc complete all as specified and as directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, suppling and fixing in opening as per specification etc complete all as specified and as directed.
S&F factory made solid panel PVC door shutter 30mm thick (style).consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with eat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement suppling & fixing in the frame at site as per specification etc complete all as specified and as directed.
S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications etc complete all as specified and as directed.
S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification etc complete all as specified and as directed.
M & L for 25mm thick second class hard wood boarding , plained one side with butt joints as in eaves boards etc complete all as specified and as directed.
M&L for Plain fillets, square, rectangular or triangular in section, clean swan, secured with nails or breads sectional area exc 3 sqcm but not exc 6 sqcm complete all as specified and as directed.
Welded steel wire fabric weight not exc 4.00 kg per Sqm supplied and fixed complete to wood or steel members etc complete all as specified and as directed.
S&F in repairs for Draperly rod /Harrison rails of stainless steel of 20mm dia with fixing brackets , stops, rollers and rings etc complete all as specified and as directed.
Supply and fixing in repair 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n.exe 0.50 Sqm in each pane after and including hacking out broken glass from wooden/metal surfaces complete all as specified and as directed by the Engr-in-Charge.
Supply and fixing in repair 3 mm thick frosted glass, ordinary quality and glazing with oil putty in square n.exe 0.50 Sqm in each pane complete all as specified and as directed by the Engr-in-Charge.
S & F in repair 110mm bore PVC (SWR) bends any radius complete all as specified and directed.
S & F 75mm bore PVC (SWR) bends any radius complete all as specified and directed.
S & F 110mm bore PVC (SWR) branch piece single (Single Y equal or unequal) complete all as specified and directed.
Supply and fixing as in replacement 75mm bore PVC (SWR) floor trap (ISI Marked), outlet with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1 (using 20mm graded store aggregate) and making good the disturbed surface to match with existing complete all as specified and as directed by the Engineer-in-Charge.
Supply and fixing 20mm bore Gun metal gate valve with iron wheel head and gun metal spindle screwed both ends after and including taking up or down old unserviceable valve complete all as specified and as directed.
Supply & fixing as in replacement 15mm Bib taps, chromium plated cast copper alloy ,screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed by the Engr-in-Charge.
Supply and fixing as in replacement for 15mm Stop valves fancy type, chromium plated, cast copper alloy, screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. Make : Essco Cat No 513A/513B or equivalent as approved by GE.
S&F in repairs for 15mm dia of pipe Angle valves (concealed type),fancy type and chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for Unions and fixed etc complete all as specified and as directed.
Supply and fix as in replacement of 15mm bore pillar tap fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. Make : Essco, Cat No DLX-508 or equivalent as approved by GE.
S&F in repair soap dish chromium plated stell/stainless steel, approx size 160x160mm x 1mm thick , fixed to walls with plugs & CP brass screws complete all as specified and directed.
Supply and fixing as in replacement 125mm dia brass chromium plated shower rose with revolving joints fixed to 15mm bore GI Pipe complete all as specified and as directed. Make :- ESSCO Cat No EOS-542A or equivalent as approved by GE.
S & F in repairs waste coupling of PTMT (half or full threaded) 32 mm dia ,complete all as specified and as directed.
S&F PVC waste pipe, 32mm bore, 750mm long for basin, fixed in repair, complete all as specified and directed.
Supply and fixing in replacement brass chromium plated towel rail 600mm long fixed with and including Chromium plated brass screws complete all as specified and as directed. Make : ESSCO Cat No A CN 1111 or equivalent as approved by GE.
Supply and fixing as in replacement 100mm dia grating doom with waste hole of PTMT (minimum weight 25gms) complete all as specified and as directed.
Supply and fixed in repair vitreous china wash hand basin including brackets, white size 550 x 400 mm incl cutting cutting for and pinning in ends of brackets. Including Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed etc complete all as specified and as directed.
Supply and fixing vitreous china premium/ist quality wash down water closet wall hung EWC white/ivory/off white (closed pattern incl all necessary accessories like rag bolts/gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect etc complete all as specified and as directed.Make: Parryware Cat No C0278 for water closet, Cat No C8071 EWC Standard for PVC seat cover or equivalent as approved by GE.
Supply and fixing as in replacement 10 litre capacity low level PVC flushing cistern (any colour), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete all as specified and as directed by Engineer-in-Charge. Make : Parryware Model No C-8090 or equivalent approved make of Hindware/Commander/Parryware.
Supply and fixing as in repair 15mm dia PVC connection pipe 450mm long with PTMT nuts complete all as specified and as directed. Make: Prayag Cat No : 323 or equivalent as approved by GE.
Taking down reinforced cement concrete in roofs, floors (other than ground floors), beams, chajjas, fascias, fin and similar work etc complete all as specified and as directed.
M&L for reinforced cement concrete (nominal mix) 1:2:4 type B1 using 20mm graded stone aggregate in slabs supported on walls, beams and columns in floors, shelves and like etc complete all as specified and as directed.
M & L for Precast cement concrete B-1 (1:2:4) using 20mm graded stone aggregate as in cover slabs for Manholes drains etc including necessary formwork etc complete all as specified and as directed.
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick (Horizontal or sloping) for fair finished flat surfaces of concrete etc complete all as specified and as directed.
M&L dismantling water tank of exc 500 ltr and not exc 1000 ltr Capacity etc complete all as specified and as directed.
S&F in repairs CP Health Faucet with 1 mtr metalic Expandable tube & hook complete all as specified and directed.
S&F in repairs CP toilet paper holder etc complete all as specified and as directed.
S&F in repairs peg set of Six chromium plated including fixing screw etc complete all as specified and as directed.Make : Prayag or equivalent as approved by GE.
Formwork to sides of column footing/plinth beam etc, rough finished surfaces of concrete flat etc complete all as specified and as directed.
Formwork to sides of columns, rough finished surfaces of concrete square or rectangular etc complete all as specified and as directed.
Formwork to sides of beam/lintel bend and similar structure for flat rough finished surfaces etc complete all as specified and as directed.
M&L RCC B-1, (1:2:4) ,( Nominal mix) using 20mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; base for columns, etc.; basement slabs, unde-reamed piles and mass concrete etc complete all as specified and as directed.
M&L RCC B-1, (1:2:4),( Nominal mix) using 20mm graded stone aggregate as in coloums, pillars, piers, posts and struts etc complete all as specified and as directed.
M&L RCC B-1, (1:2:4), ( Nominal mix) as in beams, lintel band and gable beams etc complete all as specified and as directed.
Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, bell/ buzzer, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good to the disturbed surfaces of walls, ceiling, floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface complete all as specified and as directed.
M&L for Point wiring complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable 1100 volts grade with multi-stranded copper conductors, drawn through and including PVC double locked Casing & caping including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etc. with 3 mm thick plastic laminated sheet cover of suitable size as required at site complete all as specified and as directed.
(a) One light/Fan pointcontrolled by one, one way switch .
(b) One 3 pin socket outlet 5 Amps on the same board with other switches.
(c) One 3 pin socket outlet 5 Amps on the switch socket combination.
All as per item No- 152 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly etc complete all as specified and as directed.
M&L for Switch piano flush type single pole, one way 5A etc complete all as specified and as directed.
M&L for Socket outlet, 2 in 1, 5 pin 5A flush type etc complete all as specified and as directed.
M&L for Switch Socket combination, 2 in 1, 5 pin 6A flush type etc complete all as specified and as directed.
M&L for Switch Socket combination, 2 in 1, 5 pin 6A/16A flush type etc complete all as specified and as directed.
M&L for stepped type electronic fan regulator 100 Watt socket size flush type on the existing phenolic laminated sheet etc complete all as specified and as directed.
M&L for bell push switch 5 amps piano type flush type etc complete all as specified and as directed. Make : Anchor/Havells/Legrand
M&L for replacement of Bell AC 230 volts musical type etc complete all as specified and as directed. Make : Anchor/Havells/Legrand
M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body with PVC round/squareblock complete all as specified and directed.
Taking down existing burnt aluminium/ copper sub main wiring and M&L for sub main wiring with four runs of 25 Sq mm and one run of 25 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including PVC double locked Casing & caping including complete all as specified and as directed. NOTE:- four runs of 25 Sq mm + one run of 25 Sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length .Make:- Finolex/Havells/RR Kabel Make of caping/casing :- Prestoplast/Finolex/supreme
Taking down existing burnt aluminium/ copper sub main wiring and M&L for sub main wiring with two runs of 4 Sq mm and one run of 4 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including PVC double locked Casing & caping including complete all as specified and as directed. NOTE:- two runs of 4 Sq mm + one run of 4 Sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length .Make:- Finolex/Havells/RR Kabel Make of caping/casing :- Prestoplast/Finolex/supreme
Taking down S&F for LED Light fitting 1 x 20 watt (4 Ft), Wall/ Surface mounted, intergrated type with all accessories internally prewired and incl connecting up with 02 pvc blocks and incl twin/ three core twisted flexible copper conductor cable of suitable size in and incl flexible hose from ceiling rose to fitting complete all as specified and as directed. Make : Crompton Geaves Cat No -CCS-102-20-65-SL-DP-NWH/ Bajaj/ Philips.
All as per item No- 164 here-in-before but LED Tube light 10 Watt (2 ft) complete all as specified and as directed.
M&L in replacement for Decorative wall mounted light fitting made up of polycarbonate including 9 watt LED lamp with B-22 base including taking down old unsv light fitting complete all as specified and as directed. Make : Havells/CG/Bajaj/ Philips.
Taking down Supply , fixing and testing in replacement of LED Bldg Security light fitting of capacity 20 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including 1.2 mtr GI bracket of 25mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling of holes as reqd and connecting up with flexible copper cable of size 0.75 sqmm 3 core from ceiling rose to the light fitting and all as specified and directed by Engr-in-Charge..Make : CG, Cat No- LSTS-20-CDL-M/ Bajaj/ Philips
Supply and fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size etc complete all as specified and as directed.
Supply and fixing LED luminaire 600 mm x 600 mm, 40/42 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size etc complete all as specified and as directed.
M&L for Triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB 63 Amps Complete all as specified and as directed.
M&L for MCB Distribution board double door type SPN 8 way, sheet steel, powder painted, with neutral link & earth bar etc. and fixing MCBs of various rating capacity including taking down old unsv MCB DBs complete all as specified and as directed.
M&L for MCB SPN 63 Amps 'C' series, 230 volts, 50 Hz suitable for fixing in MCB DB incl taking down old unsv MCB complete all as specified and as directed
M&L for MCB SP 6-32 Amps 'C' series, 230 volts, 50 Hz suitable for fixing in MCB DB incl taking down old unsv MCB complete all as specified and as directed.
M&L for metal clad AC socket point single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB SP 20 Amps complete all as specified and as directed. Make : Legrand/Havells/Siemens
Taking down Ceiling fan/ Exhaust Fan of any sweep carefully from its installed position, dismantling complete, cleaning all dust, applying grease for bearing, including filling cavaties with filler, after cleaning all dust, reassembling the fan and blades, hanging/ fixing the fan in its original position and testing on completion complete all as specified and as directed.
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300 mm complete all as specified and as directed. Make : Bajaj/CG/Orient
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed. Make : Usha/Bajaj/Crompton
Taking down LT UG cable/ service connection of any size and M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 16 sq mm, 2 core complete all as specified and as directed. NOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items.
M&L for spread fine river sand in trenches complete all as specified ans as directed. NOTE: For measurement purpose, punned down thickness shall only be taken.
M&L for laying brick sub class 'B' old size burnt bricks for cable protection of size 230mmx115mmx75mm complete all as specified and as directed
Supply & laying tubes 'light grade' galvanised, with all fittings, fixed complete to walls, poles, ceilings or laid in floors/ trenches/ road crossing for protection of cables of size 40 mm dia bore including taking out unsv GI tubing complete all as specified and as directed.
Material & Labour for earthing with galvanised steel earth plate electrode of size 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to the galvanised earth lead strip 32x6mm by means of bolts, nuts check nuts and washers of galvanised iron or steel as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point all as specified orindicated including testing on completion including necessary excavation and earth work in soft/loose soil, returning filling, disposal of surplus soil, earth pit in PCC 1:3:6 type C-1, RCC (1:1.5:3) type A1 precast cover (54cmx54cmx5cm) duly reinforced with including 8 mm dia TMT bar @ 150mm c/c both ways, one lifting handle made of 8mm dia TMT bar, embeded in precast cover slab, funnel, 20mm dia GI medium grade watering pipe, 15mm dia GI light grade earth lead protection pipe, chorcoal and common salt in alternatee layer complete all as specified and directed by Engr-in-Charge.
SAYED ALI AND SONS
Feroz Alam Khan
M/S Lucky Builders
M/S SANGITA TRADERS
SK SINGH
VIHUTO YEPTHO
Shri B K Ukil
stage.html
html • 0.06 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .