REPAIR TO HARDSTANDING AND ALLIED WORKS AND COMPREHENSIVE MAINT OF INTERNAL ELECTRIFICATION WORKS AT ZONE I UNDER GE ARMY JAISALMER

Amount

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. loaded bedded and pointed in any mortar

M & L for Granite (of any type) tiles18 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types

M&L for machine cut kota stone flooring 550 x 550x 20 to 25mm thk laid over cement screed bed jointed & pointed with grey cement slurry mixed with pigment to match the shade including rubbing &mirror polishing including over a screed bed or bedding layer of 15mm thk in CM 1:6 for laying floor finishes all as specified and directed.

ditto above but on verticla surfaces such as skirting /dado etc including over a screed bed or bedding layer of 10mm thk in CM 1:3 for laying tiles all as speciifed.

M&L sand stone slabs 5 cm thk in sunshades ,chajjas ,shelves ,cills landings, cover stones ,templates etc

ditto but granite tile 600 x 300 x 12mm including screed bed in CM 1:6 of 15mm thick

Demolition of cement concrete (un reinforced) in any description and in any position not otherwise specifically provilded.

Plain cement concrete 1: 2 :4 mixed type B1 using 40 mm graded stone aggregate 100 mm thick as in floor toping , finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for PCC 50 mm thick type C1 1:3:6 (20 mm graded stone aggregate) laid in alternative as in plinth protection including finished the surface even & fair without using extra cement& filling the joints with mastic filling i.e one part of bitumen 85/25&3 parts of sand by weight.

Demolition of cement concrete (un reinforced) in ground floors and pavings n.exc 15 cm thick (below or above ground level) & removing rubbish out side MD land all as directed by Engineer-in-charge.

M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in floors & finished the surface even & fair without using extra cement all as specified.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exc 0.06sqm but not exc 0.11sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement over 15mm thick screed bed in CM 1:6 all as specified.

M&L for 75 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base of flooring/ hard standing & finished the surface even & fair all as specified.

M&L for PCC interlocking tiles 60 mm thick of grade M-35 conforming to IS-15658: 2006 with grey cement and no pigment and top layer (6 to 10 mm thick) shall contain hardner (ironite) laid on pavings all as directed by Engineer-in-charge.

Ditto above item 14 but except tiles.

M&L for even spreading of 25mm thick layer of sand cushioning all as specified and directed

M&L for non skid ceramic coloured tiles 10mm area of each tile exc 0.18sqm but not exc 0.38sqm including of size 600 x 600mm in floors etc set and jointed in neat cement slurry and pointed in coloured cement over 15mm thick screed bed in CM 1:6 all as directed

ditto but as in skirting, steps etc in vertical surfaces with 15mm thick rendering in CM 1:6 as in backing coat all as specified.

M&L for PCC coloured interlocking tiles 60 mm thick of grade M-35 conforming to IS-15658: 2006 with grey cement and colour pigment and top layer( 6 to 10 mm thick) shall contain hardner (ironite) laid on pavings all as directed by Engineer-in-charge.

Taking down cement plaster on brick or stone wall or concrete wall or Ceiling etc including racking out joints, hacking for key, scrubbing down with water etc.

M&L for rendering 15 mm thick on stone masonry surfaces or surfaces other than fair faces of brick work or on one side of lathing in cement mortar 1:6 & finished the surface even & fair without using extra cement all as specified.

M&L for rendering 5 mm thick on fair faces faces of brick work or concrete surfaces of ceilings in cement plaster 1:3 & finished the surface even & fair without using extra cement all as specified.

M&L for preparing new plastered surfaces and applying two coats of oil bound distemper over a coat of primer including preparatory to distempering on surfaces of walls all as directed by Engineer-in-Charge.

Preparing surfaces of ceilings and applying three coats of white wash.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/ springs clips and providing and fixing new ones.

S & F 3.0 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares n.exc 0.5 Sq. M in each pane

S & F 4.0 mm thick sheeet ordinary quality and glazing with oil putty in squares exc 0.5 Sqm. in each pane

S & F in repairs Galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples

Dismantling water tanks and removing to store (exc 250 and not exc 500 ltr capacity)

Dismantling water tanks and removing to store (exc500 and not exc 1000 ltr cap)

M & L rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I capacity of tank 500 ltrs complete fixed in repairs.

-Ditto- All as per ser No 31 but 1000 ltr capacity.

S&F in repairs 15mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixeed (minimum weight 142gms)

S&F in repairs 20mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixeed (minimum weight 210gms)

Taking up or down steel tubing and connections, of following bore :-

(a) 15mm bore

(b) 20mm bore

S&F tubes, galvanized, medium grade of following bore with all fitting and fixed with walls and ceiling or laid in floors :-

(a) 15mm bore

(b) 20mm bore

Dismantling Trellis work (Jafri), including taking as under of battens in trellis (posts and rails measured separately)

M&L for 35mm thick precast cement concrete louvers and jallies type C-0 (1:3:6) using 12.50mm graded aggregate (measured solid), including all mouldings but excluding frame, set in cement mortar 1:4 all as directed.

M& L plain cement concrete 1:2:4 type B 1 using 20mm graded stone agregate cast in situ kerb stone ,copings,bed plates ,water through and the like including wethering ,slightly rounded or chamfered angles and throating including use of form work (straight or curved ) set in CM 1:4 complete all as specified and as directed by Enginneer in charge

Dismantling (AC corrugated , semi corrugated etc ) AC sheets in roof coverings complete all as specified & directed by Engineer in charge.

S&F Pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet/ semi corrugated 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws as specified.

Dismantling wrought iron or mild steel work of any description not othervise provided for

S &F Rolled nild steel framed work as in door or gates of angle or other section confirming to Fe - 410-S with gusset plates, rail braces etc complete drilled for fixing of steel sheeting or other covering and hanging and fixing complete.

S & F Joist, channel,angel or tee sections, fixed independently , without connecting plates etc

M & L preparation of new steel surfaces exc 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer primer

Note :-The quoted rates shall deemed to be included for the following :

(a) As the above work is required to be carried out for rectifying day to day E/M nature compliants, the following term and conditions shall be applied

(i) Non reporting of trademen : 500/- per elect /day Helper 300/- per helper per day

(ii) Non attending the complaints to with in 48 hrs 50/- per complaints per day shall be recovered.

(b) The contractor shall depute adequate trademan/ helper to repair/ replacement of u/s parts and attending the day to day complaints received from user on daily basis but not less than 2 Electrician and 2 helper per day.

Supply & Fixing in replacement of Switch modular 5 Amps single pole, one way ( ISI marked ) complete make:- Anchor/Legrand/Havells or equivalent as approved by GE.

Supply and fix in replacement of modular Socket outlet, multi purpose, 5 Amps 3 Pin ( ISI marked) complete make :- Anchor/Legrand/ Havells or equivalent as approved by GE.

Supply and fix in replacement of modular Bell push flush type, 6 Amps fixed complete make:- Anchor/Legrand/Havells or equivalent as approved by GE.

Supply and fix in replacement of modular Socket 15 Amps 3 pin, 5 Amps 3 pin, ( ISI marked) all as specified .make:- Anchor/Legrand/Havells or equivalent as approved by GE.

Supply and fix only in replacement of modular Switch 15 Amps single pole, one way ( ISI marked ) complete make:- Anchor/Legrand/Havells or equivalent as approved by GE.

Supply and fix in replacement of Switch modular 5 Amps single pole, two way ( ISI marked ) complete make:- Anchor/Legrand/Havells or equivalent as approved by GE.

Supply and fix in replacement of switch piano flush button single pole one way 5 amps, 230 Volts complete as directed. Make : Anchor/Legrand/ Havells or equivalent as approved by GE.

All as per item No. 53.00 above but 5 Amps, 2 way complete as directed. Make : Anchor/Legrand/ Havells or equivalent as approved by GE.

Supply and fix in replacement of socket outlet flush type 5 Amps, 5 pin, 230 Volts as per IS complete as directed. Make : Anchor/Legrand/ Havells or equivalent as approved by GE.

Supply and fix in replacement of switch socket combination flush type 2in1 5 Amps, 230 Volts ( ISI marked ) complete as directed. Make : Anchor/Legrand/ Havells or equivalent as approved by GE.

Supply and fix in replacement of switch piano flush button single pole one way 15 Amp 240 volt complete as directed. Make : Anchor/Legrand/ Havells or equivalent as approved by GE.

Supply and fix in replacement of socket outlet flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp, 230 volts ( ISI marked )complete as directed. Make : Anchor/Legrand/ Havells or equivalent as approved by GE.

Supply and fix in replacement of switch socket combination flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp,universal 230 volts ( ISI marked ) complete as directed. Make :- Anchor/Legrand/ Havells or equivalent as approved by GE.

Supply and fix in replacement of bell push single pole, 6 amps, 230 Volts, flush type complete as directed. Make : Anchor/Legrand/ Havells or equivalent as approved by GE.

Supply and fix in repair white colour finished mounting modular inner and outer plates of suitable size for following sizes:

(a) One/Two module

(b) 3 modules

(c) 4 modules

(d) 6 modules

(e) 8 modules

(f) 12 modules

Supply and fix in repair white colour finished modular Surface Plastic Boxes for following sizes:

(a) One/Two module

(b) 3 modules

(c) 4 modules

(d) 6 modules

(e) 8 modules

(f) 12 modules

(g) 16 module

Supply and fix in replacement of Lamp holder, insulated body with back plate suitable for batten fittings complete Make : Anchor/Legrand/ Havells or equivalent as approved by GE.

Supply and fix in replacement of Fan regulator, step type, Socket type, 230 volts 50Hz single phase, resistance type, complete. MAKE:- Anchor/USHA /Havells or equivalent as approved by GE.

Supply and fix in replacement of modular fan regulator 5 step type complete 2 module (Make:Crabtree athena Cat Part No CQAT0385 / Legrand Mosaic, Ancher or equivalent as approved by GE.

Supply and fix in PVC Tape roll for joints complete all as specified Make : Anchor or equivalent as approved by GE.

Supply and fix in replacement of Bell Ding Dong,AC, 230 Volts,single pole complete. Make : Anchor/Legrand/ Havells or equivalent as approved by GE.

Supply and fix in replacement of buzzer,AC, 230 Volts,single pole complete. Anchor /Havells or equivalent as approved by GE.

Supply and fix in replacement of ceiling rose, 3 terminal ,AC, 230 Volts PVC/polycarbonate, isolated body,single pole complete. Anchor / Havells or equivalent as approved by GE.

Supply and fix in replacement of in repair plastic laminated bakelite sheet cover of Hylam brand 2.8 mm thick including cutting holes for switches, sockets etc as pre requirement including fixing with brass machine screws and washer complete of following sizes:-

(a) 10" x 12" size

(b) 8" x 10" size

(c) 8" x 6" size

(d) 7" x 4" size

(e) 4" x 4" size

Supply and fix in replacement of PVC Gang Box of various size including cutting holes for switches, sockets etc as pre requirement including fixing with brass machine screws and washer complete of following sizes:-

(a) 6" x 6" size

(b) 8" x 6" size

(c) 7" x 4" size

(d) 4" x 4" size

S & F MCCB TPN 415 volts 25 KA suitable for fixing on DB of capacity 63 to 125 Amps with extended terminals complete all as specified.

Fixing only MCB's TPN 32 to 40 Amps, 415 Volts,10 kA rapturing capacity 'C' curve.complete all as specified & directed. NOTE :- MCB's TPN 32 to 40 Amps shall be issued under Sch 'B' free for fixing only.

Supply and fixing MCB's TPN 63 Amps, 415 Volts,10 kA rapturing capacity 'C' curve.complete all as specified & directed. Make-Schneider/Legrand/ABB or equivalent as approved by GE.

Supply and fixing MCB's TPN 100 Amps, 415 Volts,25 kA rapturing capacity 'C' curve.complete all as specified & directed. Make-Schneider/Legrand/ABB or equivalent as approved by GE.

Supply and fixing MCB's single pole and neutral 63 Amps, 240 Volts,10 KA rapturing capacity 'C' curve.complete all as specified & directed. Make-Schneider/Legrand/ABB or equivalent as approved by GE.

Supply and fixing MCB's single pole and neutral 40 Amps, 240 Volts,10 KA rapturing capacity 'C' curve.complete all as specified & directed. Make-Schneider/Legrand/ABB or equivalent as approved by GE.

Fixing Only MCB's single pole and neutral 6 to 32 Amps, 240 Volts,10 KA rapturing capacity 'C' curve.complete all as specified & directed. NOTE :- MCB's single pole and neutral 6 to 32 Amps shall be issued under Sch 'B' free for fixing only.

Fixing only MCB's single pole 6 Amps to 32 Amps, 240 Volts,10 KA rapturing capacity 'C' curve.complete all as specified & directed. NOTE :- MCB's single pole 6 Amps to 32 Amps shall be issued under Sch 'B' free for fixing only.

Supply and fix in repair of twisted twin core flexible copper cable of size 24/0.20 complete all as specified and directed by Engr-In-Charge. MAKE:- Polycab/Finolex/Havells or equivalent as approved by GE.

Supply and fix in repair single core cable PVC insulated and unsheathed multistranded copper conductor of size 1.5 Sqmm from point wiring including removal old existing unserviceable one complete all as specified and directed. MAKE:- Polycab/Finolex/Havells or equivalent as approved by GE.

Supply and fix in repair single core cable PVC insulated and unsheathed multistranded copper conductor of size 2.5 Sqmm from point wiring including removal old existing unserviceable one complete all as specified and directed. MAKE:- Polycab/Finolex/Havells or equivalent as approved by GE.

Supply and fix in repair single core cable PVC insulated and unsheathed multistranded copper conductor of size 4.0 Sqmm from point wiring including removal old existing unserviceable one complete all as specified and directed. MAKE:- Polycab/Finolex/Havells or equivalent as approved by GE.

Supply and fix in repair single core cable PVC insulated and unsheathed multistranded copper conductor of size 6.0 Sqmm from point wiring including removal old existing unserviceable one complete all as specified and directed. MAKE:- Polycab/Finolex/Havells or equivalent as approved by GE.

Supply and fix in repair Three core cable PVC insulated and unsheathed multistranded copper conductor of size 2.5 Sqmm complete all as specified and directed. MAKE:- Polycab/Finolex/Havells or equivalent as approved by GE.

Supply and fix in repair Three core cable PVC insulated and unsheathed multistranded copper conductor of size 4.0 Sqmm complete all as specified and directed. MAKE:- Polycab/Finolex/Havells or equivalent as approved by GE.

Supply and fix in repair Three core cable PVC insulated and unsheathed multistranded copper conductor of size 1.5 Sqmm complete all as specified and directed. MAKE:- Polycab/Finolex/Havells or equivalent as approved by GE.

Supply and fix in repair Three core cable PVC insulated and unsheathed multistranded copper conductor of size 6.0 Sqmm complete all as specified and directed. MAKE:- Polycab/Finolex/Havells or equivalent as approved by GE.

Supply & fix in repair Sheet metal earth plug, socket with top, single pole and neutral with single pole MCB 20 Amps 240 volts fixed in repairs complete. Make :- HAVELL's / Legrand/ IndoAsian or equivalent as approved by GE.

Fixing Only of LED tube light fitting 18/20 watt tube LED, Neutral white in colour 1200 mm in length wall mounted LED batten, including all electric connection with whilte flexible cord 1.50 Sqmm 3 core as required complete all as specified and directed. NOTE :- LED tube light fitting 18/20 watt shall be issued under Sch 'B' free for fixing only.

Fixing Only of LED tube light fitting 9/10 watt tube LED Neutral white in colour, 600 mm in length wall mounted LED batten, including all electric connection with whilte flexible cord 1.50 Sqmm 3 core as required complete all as specified and directed. NOTE :- LED tube light fitting 9/10 watt shall be issued under Sch 'B' free for fixing only.

S & F for Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired and necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed.Make :- Bajaj/crompton/philips/wipro/Havells or equivalent as approved by GE.

S & F for LED down light recess mounted luminare, square/Round type as per site requirement 15 watts with efficiency of 100 lumens per watt, sleek design aluminium housing polycarbonate diffuser white finish operating voltage from ceiling rose to fitting complete all as specified and as directed. Bajaj/crompton/philips/wipro/Havells or equivalent as approved by GE.

S & F LED down light 5 Watt round/Square in shape as per site requirement Ideal for wardobes, furniture lighting, display & interior decoration of crompton Philips CROMPTON, PHILIPS, BAJAJ, Wipro and Syska or equivalent as approved by GE.

S&F in repair, bldg security light fittings Wall mounted LED light 20 Watt including bracket made out of GI pipe (medium grade) 40mm, 1.20 metre long made to shape and fixed outside of the building by means of 2 No FI 40x6 mm clamps with suitable size of nuts, bolts, washers and connecting with three core copper flexible cable of size 1.50 Sq mm complete all as directed by Engineer-in-charge. Make:- Bajaj/crompton/philips/wipro /Havells or equivalent as approved by GE.

S & F for LED post top lantern 40 watt light fitting made of cast aluminium spigot housing with decarative opal acrylic diffuser with IP 65 protection complete with all accessories fixed on GI pipe 50 mm dia including removal of old unserviceable one complete all as specified and directed. Make Bajaj cat Part No. BGCL 40 W LED Philips, Wipro or equivalent as approved by GE.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sq. mm 2 Core nominal cross section in service connections Complete all as specified by Engineer-in-Charge

S & F for Decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb and provosion of LED bulb 15 watts complete all as specified and as directed. Make Havells, Philips, Bajaj or equivalent as approved by GE.

Fixing only LED tube rod 20 Watt in Extg tubelight fitting after disconnecting unsv choke starter and putting the T/L in serviceable condition incl all electric connection complete. NOTE :- LED tube rod 20 Watt shall be issued under Sch 'B' free for fixing only.

M/L for repair/refixing of loosely hanged PV/steel conduit, PVC casing & caping of any type, size by means of shadles, clamps screwes to existing wall/ceiling and making good in all respect incl wiring inside all as shown specified and directed by Engr-in-Charge.

S&F in replacement of PVC conduit pipe of 20/25mm dia ISI marked with all accessories all as specified and directed

S & F LED Bulb 9 Watt of Base E27 Complete all as Specified Make: Wipro/HPL/ Philips/Havells or equivalent as approved by GE.

S&F in replacement of PVC casing, capping of 20mm dia ISI marked with all accessories all as specified and directed

Nitin Enterprises

M/s. Dhananjay Construction

KALLA TRADERS AND ENGINEERS

M/s Ramesh & Company

M/S RAKESH CHOUDHARY

S K TRADER

RASAM ENGINEERING COMPANY

Dadhich Engineers