COMPLETION OF INCOMPLETE WORK FOR PROVN OF 104 X GEYSERS IN GOVT MD ACCN AT SJ VIHAR OF 52 ENGR REGT AND CERTAIN OTHER SANCTIONED WORK UNDER GE (EAST) JALANDHAR CANTT

Amount

Excavating in post holes (or similar holes) each n.exc 0.5 cum in soft/ loose soil, getting out, returning, filling in, watering and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm and removing surplus soil to a distance n.exc 50m and making good surfaces complete all as specified and directed.

Material and labour PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation filling, post hole, mass concrete, surface channel and drains and other similar work etc complete all as specified and directed.

Material and labour for cutting holes into for through brick wall exc. 150 sqm but n. exc. 400 sqcm built in cement mortar and making good in cement mortar (1:3) or concrete (1:2:4) type B-1 complete all as specified and directed.

Material and labour for steel work in tubular trusses including special shaped washer etc. steel is painted one shop coat of zinc chromate primer paint (including preparation of surface) complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

Supply and fixing Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws as specified and directed

Material and labour for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material and labour preparation of new or previously untreated steel surfaces of any description, n. exc. 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed

Material and labour hard core of broken stone or boulder of gauge n. exc. 63mm, deposited, spread and leveled in layers n.exc. 15cm thick, watered and well rammed to a true surface complete all as specified and directed.

Material and labour 100mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in sub floors, sub base, hard standing, concrete surfaces finished even & rough to receive topping floor finish/layer all as specified & directed.

Supply and fixing structural steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. using steel conforming to Fe-410 Gde-E-250 complete including drilled for fixing of steel sheeting or other covering; doors, door frame chowkhat etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including necessary cutting drilling and welding etc complete all as specified and directed.

Material and labour for Dholpur stone as in wall cladding with machine cut stone as in face work, pillar, arches, hexagonal roof pillar and all facing etc of 16 to 18mm thick one side single length laid and jointed in cement and sand mortar (1:2) including Ardelite chemical and recess pointing pointed with an admixture of white cement and stone dust (1:1) and making edges, work in small patches, stone shall be of uniform colour of each stone and size not exceeding 0.20 Sqm each fixed, over & including 15mm thick cement plaster in cement mortar (1:4) on brick wall or concrete surface finished fair & even to receive tiles complete all as specified and directed.

Material and labour complete removal of existing treatment by washing, rubbing down and stopping etc on wall surfaces and applying two coats of cement base paint complete all as specified.

Material and labour cement concrete (1:5:10) type E-2 using 40mm graded brick aggregate as in foundation filling and mass concrete complete all as specified and directed.

Supply and fixing rolled mild steel work roof trussed (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, Tee, Angle, Channel or Flat Sections) including distance pieces, cleats etc, Fe-410-W (Gde E-250) complete all as specified and directed.

Supply and fixing in flexible PVC waste pipe of approved quality 32mm bore, 75cm long with one end socketed fixed to waste coupling including one PVC reducer 32mm complete all as specified and directed

Supply and fixing in mild steel CP grating 125mm dia circular shaped and fixing with cement mortar (1:3) on Nahani Trap or floor trap complete all as specified and directed.

Supply and fixing sink mixer swinging spout (wall mounted) with connecting legs & wall flanges of suitable for fixing to 15mm bore GI pipe, complete all as specified and directed

Material and labour for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands plinth courses, roof kerbs or mud stops, benching, coping, bed plates, parapets, water through and the like etc including weathering, slightly rounded or chamfered angles throating, edges of interlocking/ chequered tiles etc complete including necessary form work complete all as specified and directed

Returning, filling in including leveling, watering and well ramming in layers n. exc. 25 cm thick each layer complete all as specified and directed.

Material and labour for Mild steel work wind tie etc for roof including securing bolt, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified.

Supply only chain link fencing MS galvanized any size or type complete all as specified and directed

Fixing only chain link fencing MS galvanized any size or type complete all as specified and directed.

Mild steel in flat, round or square bars, in available lengths conforming to Fe 410-W (Gde-E-250) quality-A complete all as specified.

Supply and fixing mild steel screw bolts diameter of neck 11 to 15mm (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc. 5cm but n.exc 10cm long complete all as specified and directed.

Supply and fixing voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 150 V to 290 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 6 Amps complete all as specified and directed.

All as per srl item No. 26.00 here-in-before but capacity 4 Amps

Material and labour for galvanised steel tubes 15mm bore, medium grade any length required with & including all fittings fixed to wall, ceilings and or laid in floors etc. including any alteration, cutting, screwing, threading for taking branch connection from existing concealed/ surface tubing complete all as specified and directed. Note:- The quoted rate include any type of civil wks involve for making good the disturbed surface to match with existing surface

Supply and fixing Brass CP stop valve 15mm bore , screwed both ends for iron pipe or for brass ferrule or to GI socket complete all as specified and directed.

All as per srl item No. 29.00 here-in-before but 20 Amps

Material and labour for sub main wiring with PVC insulated cable copper conductor FRLS two single core 2.5 Sqmm drawn in and including through PVC rigid non metallic concealed conduit, cutting chases and making good to disturbed surfaces to match with existing specifications including earth continuity FRLS copper conductor 2.5 Sqmm PVC insulated with green insulation complete all as specified and directed. Note: Two run of 2.5 sqmm wire and one run of 2.5 sqmm wire as earth wire through rigid PVC conduit shall be measured as one unit.

Material and labour for making existing surface copper wiring to concealed wiring by disconnecting, taking down existing copper wiring single phase 2.5 Sqmm and PVC conduit, cutting chases in brick wall, cutting holes and fixing existing taken down conduit and plastering the surface with cement mortar and making good disturbed surface and passing through conduit existing taken down copper size 2.5 Sqmm and making connections complete all as specified and directed.

Material and labour for sub main wiring with PVC insulated cable copper conductor FRLS two Nos of single core 4 Sqmm drawn in and including through PVC rigid non metallic concealed conduit, cutting chases and making good disturbed surfaces to match with existing specifications including earth continuity FRLS copper conductor 4 Sqmm PVC insulated with green insulation complete all as specified and directed. Note: Two run of 4 sqmm wire and one run of 4 sqmm wire as earth wire through rigid PVC conduit shall be measured as one unit.

Material and labour in replacement MCB SP 20 Amps, B-curve complete all as specified and directed.

Material and labour in replacement MCB SPN 32 Amps, B-curve complete all as specified.

Supplying, laying, jointing and testing in replacement underground XLPE insulated,PVC sheathed, steel stripped wire armoured heavy duty electric cable LT 1100 volt grade (heavy duty) with stranded aluminum conductor of size 16 Sqmm 2 core laid in trenches, in floor, in duct, through pipes or along the pole complete all as specified and directed.

All as per srl item No. 36.00 here-in-before but size 185 Sqmm 3.5 Core

All as per srl item No. 36.00 here-in-before but size 95 Sqmm 3.5 Core

Supply and fixing in sheet metal enclosure for DBs when MCBs to be used, SPN 4 ways 240 V, bus bar for neutral and earth, double door, inside and outside complete all as specified and directed

Supply and fixing AC 3 phase 4 wire, CT opeated electronic kWh energy meter of rating -/5A programmable upto 600A of class-1, 3x240V, 50Hz complete all as per specified and directed

Supply and fixing current transformers (CT) resin cast ring type of primary rating 600A and secondary rating 5A, accuracy class 1.0 with diameter of suitable size Required at site complete all as per specified and directed

Supply and fixing LTCT meter box for housing 3 Nos CTs and 3 phase energy meter made of FRP material and of dimension 830mm x 350mm x 230mm alongwith all fixing accessories complete all as per specified and directed

Supply, installation and testing of AMF panel outdoor type suitable for DG set 125 KVA with factory made type weather proof, vemin proof fully ventilated both side opening and fabricated out of 2.0mm thick CRCA sheet and mounting channel 75mm having bus bar three phases and one neutral of aluminium 250 Amp capacity, fixed on insulator by coloured heat shrinkable sleeves and housed in specified including powder coated internally externally the entire steel surfaces, all the cover shall have fully locking arrangement. fully internaly wired with suitable size of thimbles and internally wireing of suitable size all as speicifed and directed, comprising with following parts :- (a) Under volate relay 415V AC for main supply (b) Under voltage relay 415V AC for DG supply (c) AC meter 230 V, 2 NO+2 NC (d) DC meter 12V

Earthing complete for feeder pillar/ LT Panels with galvanised steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground vertically at a depth not less than 2.25 metres below normal ground level with top edge of the plate at a depth not less than 1.5 metres below normal ground level, connected with and including aluminium strip 25mm x 3mm in and including GI pipe 40mm bore light grade as protection pipe (from top of earth plate up to the test point) by means of GI bolts, nuts, check nuts and washers of GI and thimbles, earth plate surrounded by packed layers of charcoal dust and common salt 15cm thick, all around including top and bottom and watering pipe 20mm bore of GI pipe light grade with funnel and wire mesh, PCC chamber of size 300x300x300mm(top of chamber minimum 15 cm above the normal ground level (1:3:6) using 20mm graded stone aggregate and RCC cover (1:2:4) type B-I using 20mm graded crushed stone aggregate of 25mm thick with 2 Nos MS handles of 12mm dia including necessary excavation/ earth work in any type of soil/rock and as shown in Electrical plate No. 3 of SSR Part-I (2009) testing on completion complete all as specified. Note : If result is not satisfactory then contractor will do 2nd earthing on his own cost

RS ENTERPRISES (BID ID -3109240)