CONSTRUCTION OF 100 Bedded Rajkiya kalyan Hostel at Bodhagaya, Gaya

BOQ Of 100 Bedded Rajkiya kalyan Hostel at Bodhagaya, Gaya

S.No. SOR Item Of work Unit Quantity Rate Amount Building PHE Boring Septik Fire Fur. Boundary Campus RWH Building PHE Boring Septik Fire Fur. Boundary Campus RWH

1 2.32 Clearing jungle including uprooting of rank vegetation ,grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. 100m2 1050.00 697.40 7,322.70 1050.00 7323 0 0 0 0 0 0 0 0

2 2.8.1 Earth work in excavation in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m . including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kind of soil. Cum 1373.41 360.70 495,387.35 1076.12 279.45 17.84 388155 0 0 0 0 0 100798 0 6435

3 2.6.1 Earth work in excavation over areas ( exceeding 30 cm in depth. 1.5 m in width as well es 10 sqm on plan) including disposal of excavated earth , lead upto 50 m and lift upto 1.5 m; disposed earth to be levelled and neatly dressed. Cum 56.26 314.90 17,715.96 56.26 0 0 0 17716 0 0 0 0 0

3 2.27.1 Extra for every additional lift of 1.5 m or part thereof in all kind of soil etc. all complete jobs. Cum 331.71 49.40 16,386.24 261.84 69.86 12935 0 0 0 0 0 3451 0 0

4 2.26 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead Cum 839.52 123.90 104,016.38 646.39 193.13 80088 0 0 0 0 0 23929 0 0

5 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. Cum 652.77 287.30 187,541.44 522.70 4.02 55.99 68.40 1.662 150172 0 0 1155 0 0 16086 19651 477

6 11.72 Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l. sqm 1238.17 290.04 359,120.28 995.75 26.79 198.11 17.52 288808 0 0 7770 0 0 57461 0 5082

8 4.1.5 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level. 0 0 0 0 0 0 0 0 0

1:3:6(1 Cement: 3 coarse sand:6 graded stone aggregate 20 mm nominal size) Cum 1.86 3434.00 6,380.37 1.858 0 0 0 0 0 0 0 0 6380

9 4.1.8 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level. 0 0 0 0 0 0 0 0 0

1:4:8(1 Cement: 4 coarse sand:8 graded stone aggregate 20 mm nominal size) Cum 83.34 3998.10 333,218.89 68.85 4.0185 10.48 275255 0 0 16066 0 0 41898 0 0

10 5.33 Providing and laying in position ready mixed or site batched design mixcement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana /Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate /retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. 0 0 0 0 0 0 0 0 0

10.1 5.33.1.1 Concrete of M-25 grade with minimum cement content of 330 kg/cum Cum 436.44 5063.20 2,209,794.69 365.10 5.04 66.30 1848578 0 0 25519 0 0 335698 0 0

10.2 5.33.2 All works above plinth level upto floor V level 0 0 0 0 0 0 0 0 0

5.33.2.1 Concrete of M-25 grade with minimum cement content of 330 kg/cum Cum 480.89 5863.20 2,819,563.16 446.32 34.57 2616865 0 0 0 0 0 202698 0 0

11 5.9 Centring and shuttering including strutting,propping etc. and removal of form for. 0 0 0 0 0 0 0 0 0

11.1 5.9.1 Foundations, footings, bases of columns etc. for mass concrete. sqm 451.92 211.60 95,626.80 244.34 75.72 128.83 3.04 51701 0 0 16022 0 0 27260 0 643

11.2 5.9.3 Suspended floors, roots, landings, balcnies and access platform. sqm 1524.95 473.50 722,064.04 1524.95 722064 0 0 0 0 0 0 0 0

11.3 5.9.5 Lintels, beams, plinth bams, griders, bressumers and contilevers. sqm 1991.45 404.70 805,939.82 1574.57 416.88 637228 0 0 0 0 0 168711 0 0

11.4 5.9.6 Columns,Pillars,Piers,Abutments, Posts and Struts sqm 1460.62 494.40 722,131.52 948.64 511.98 469009 0 0 0 0 0 253123 0 0

11.5 5.9.7 Stairs,(excluding landings) except spiral-staircaces. sqm 116.06 439.90 51,055.89 116.06 51056 0 0 0 0 0 0 0 0

11.6 5.9.16.1 Edges of slabs and breaks in floors and walis- Under 20 cms wide m 311.40 130.20 40,544.28 311.40 40544 0 0 0 0 0 0 0 0

11.7 5.9.19 Weather shade,Chajjas, corbels etc. including edges sqm 85.27 550.90 46,975.24 85.27 46975 0 0 0 0 0 0 0 0

11.9 5.9.2 Walls (any thickness) including attached pilasters. Butteresses, plinth and string courses etc. sqm 69.85 375.10 26,199.23 69.85 26199 0 0 0 0 0 0 0 0

12 5.22 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. 0 0 0 0 0 0 0 0 0

13 6.1C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in etc. 0 0 0 0 0 0 0 0 0

14 6.3C Extra tor Brick work in superstructure above plinth level upto floor V cum Cum 395.10 842.20 332,757.17 320.23 74.87 269698 0 0 0 0 0 63059 0 0

15 6.1.12C Half brick masonry with non modular fly ash bricks of class designation 10, conforming IS :12894, in superstructure above plinth and upto floor V level. 0 0 0 0 0 0 0 0 0

16 6.21A Extra for providing and placing in position 2 Nos, 6 mm dia , MS bars at every third course of half brick masonry (with F. P. S. bricks) sqm 746.08 113.60 84,754.38 746.08 84754 0 0 0 0 0 0 0 0

17 13.24.2 Providing 6 mm cement plaster to ceiling of mix 1:4(1 cement: 4 coarse sand) etc. complete. sqm 1504.80 125.60 189,003.25 1504.80 189003 0 0 0 0 0 0 0 0

18 13.11.4 Providing 12 mm cement plaster of mix 1:6(1 cement: 6 coarse sand) etc. allc omplete. 4613.10 141.50 652,753.94 3469.12 136.37 1007.61 490881 0 0 19296 0 0 142577 0 0

19 13.12.2 Providing 15 mm cement plaster on rough side of single or half brick wall of mix 1:4(1 cement: 4 coarse sand) etc. all complete. sqm 2577.29 176.40 454,634.13 1781.39 795.90 314237 0 0 0 0 0 140397 0 0

20 13.26 Neat cement punning over plaster surface etc. sqm 289.77 40.50 11,735.52 153.40 136.37 6213 0 0 5523 0 0 0 0 0

21 13.17.1 12 mm cement plaster 1:3( 1 cement: 3 coarse sand) finished with a floating coat of neat cement sqm 10.30 203.60 2,097.08 10.3 0 0 0 0 0 0 0 0 2097

22 4.17 Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth sqm 107.40 436.60 46,889.53 107.40 46890 0 0 0 0 0 0 0 0

23 6.47A Providing 250mm wide brick drain in cement mortar (1:6) with av. 150mm. Clear depth and 250mm apron including cost of E/W. involved with 75mm cement concrete (1:4:8) over one brick designation 100-A flat soling in proper grade and slope at the base.the drain duly.plastered in CM. (1:3) with punning over exposed surface all complete as per building specification and direction of E/l, m 119.33 1097.49 130,963.48 119.33 130963 0 0 0 0 0 0 0 0

24 10.15 Providing and fixing pressed steel door confirming IS code 4351 manufactured from commerical mild steel sheet of 1.25 mm thickness including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50 x 25 mm or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechnical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge 0 0 0 0 0 0 0 0 0

25 21.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / aneling,C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 0 0 0 0 0 0 0 0 0

A 21.1.1.1 For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) sqm 913.07 386.10 352,537.29 913.07 352537 0 0 0 0 0 0 0 0

B 21.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) sqm 913.07 480.20 438,457.41 913.07 438457 0 0 0 0 0 0 0 0

26 9.51.1 Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With second class teak wood beading 62x19 mm sqm 202.91 992.4 201,362.92 202.91 201363 0 0 0 0 0 0 0 0

27 21.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 0 0 0 0 0 0 0 0 0

21.3.2 With float glass panes of 5.50 mm thickness(weight not less than 12.50 kg/sqm) sqm 172.47 1115.10 192,320.46 172.47 192320 0 0 0 0 0 0 0 0

28 9.48 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 0 0 0 0 0 0 0 0 0

28.2 9.48.2 Fixed to openings/ wooden frames with rawl plugs screws etc KG 271.95 161.10 43,811.15 271.95 43811 0 0 0 0 0 0 0 0

29 10.3 Providing and fixing in position collapsible steel shutters with vertical channes 20x10x2 mm and braced with flat iron diagonals 20x5 mm size with top and bottom rail of T-tron 40x40x6 mm with 40 mm dia steel pulleys complete with bots.nuts locking arrangement stoppers handies including applying a priming coat of approved steel primer. sqm 6.71 6303.40 42,283.84 6.71 42284 0 0 0 0 0 0 0 0

30 10.18 Providing and fixing M.S.fan clamp type I or II of 16 mm dia.M.S. bar bent to shape with hooked ends in R.C.C slabs during laying including painting the exposed portion of loop,all as per standard design complete. nos. 100.00 165.40 16,540.00 100.00 16540 0 0 0 0 0 0 0 0

31 10.36 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.). KG 869.40 546.80 475,387.92 869.40 475388 0 0 0 0 0 0 0 0

32 11.26 Kota stone slab flooring over 20 mm (average ) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete . Base with 1:1:1 (1 lime : 1 surkhi: 1 coarse sand ) / 1:4 (1 cement: 4 coarse sand) sqm 488.48 1252.70 611,912.87 488.48 611913 0 0 0 0 0 0 0 0

33 11.27 Kota stone slabs 20 mm thick in risers of steps skirting. Dado & pillars laid on 12 mm (average (thick cement mortar 1:3 (1 cement: 3 coarse sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. sqm 83.81 1334.90 111,872.31 83.81 111872 0 0 0 0 0 0 0 0

34 11.41.2 Providing and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete. sqm 668.75 1638.80 1,095,953.68 668.75 1095954 0 0 0 0 0 0 0 0

35 11.46.2 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. sqm 74.81 1191.8 89,161.26 74.81 89161 0 0 0 0 0 0 0 0

36 11.31 Extra for pre finished nosing in treads of steps of Kota stone / sand stone slab. m 270.90 82.90 22,457.61 270.90 22458 0 0 0 0 0 0 0 0

37 11.32 Extra for Kota stone / sand stone in treads of steps and risers using single up to 1.05 metre.length sqm 53.54 18.10 968.98 53.54 969 0 0 0 0 0 0 0 0

38 11.39 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1 st quality conforming to IS : 13755 of NITCO , ORIENT , SOMANY , KAJARIA or equivalent make in colours such as white , Ivory , Grey , Fume , Red , Brown , laid on 20 mm thick cement motar 1:4 (1 cement: 4 Coarse sand) including grouting the joints with white cement and matching pigments etc, complete. sqm 70.47 686.80 48,402.23 70.47 48402 0 0 0 0 0 0 0 0

39 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. sqm 316.75 795.00 251,814.37 316.75 251814 0 0 0 0 0 0 0 0

40 8.2 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. 0 0 0 0 0 0 0 0 0

41 22.3 Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C. kitchen and the like consisting of: (i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming tc IS 2645 in recommended proportions. (ii) 2nd course of 20 mm cement plaster 1:3 (1 cement:3 coarse sand)mixed with water proofing compound in recommended proportion, (iii) 3rd course of applying blown or/residual bitumen aplied hot at 1.7 kg. per sqm of area, (iv) 4th course of 400 micron thick PVC sheet.(Overlaps at joints of PVC shet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqni). sqm 51.32 480.60 24,663.62 51.32 24664 0 0 0 0 0 0 0 0

42 22.8 Providing and laying integral cement based water proofing treatment including prepatation of surface as required for treatment of roofs, balconies , terraces etc, consisting of following operations. (a) Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with proprietary water -proofing compound cleaning the surface before treatment, (b) Laying cement concrete using broken bricks / brick bats 25 mm to 100 mm size with 50 % of cement mortar 1:5 (1 cement: 5 coarse sand ) admixed with proprietary water proofing compound conforming to IS : 2645 over 20 mm thick layer of cement mortar of mix 1:5 (1 cement: 5 coarse sand ) admixed with proprietary water froofing compound conforming to IS 2545 to reuired slope and treating similary the adjoining walls upto 300 mm height including rounding of junctions, or walls ad slabs. (c) After two days of proper curing applying a secoung coat of cement slurry admixed with proprietary water proofing compound conforming to IS : 2645. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement: 4 coarse sand ) admixed with proprietary water proofing compound conforming to IS : 2645 and finally finishing the surface with trowel with neat cement slurry and making of 300 x 300 mm square. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test, All above operations to be done in order and as directed and specifed by the Engineer-in-Charge. sqm 483.51 850.70 411,318.68 483.51 411319 0 0 0 0 0 0 0 0

43 12.39 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 mx1 mx400 micron, finished 12 mm cement plaster 1:3 (1 cement:3 coarse sand) and a coat of neat cement rounding the edges and making and finishing the outlet complete nos. 10.00 189.4 1,894.00 10.00 1894 0 0 0 0 0 0 0 0

44 13.116 Forming groove of uniform size in the top layer of washed stone grit piaster as per approved pattern using wooden batten nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charges. m 450.00 47.10 21,195.00 450.00 21195 0 0 0 0 0 0 0 0

45 9.6 Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), including ISI marked M.S.pressed butt hinges bright finished of required size with necessery screws, all complete as per directions of Engineer-in-Charge and panelling with panels of: 0 0 0 0 0 0 0 0 0

9.6.3 12 mm thick prelaminated (with decorative lamination on one side and balancing lamination on other side) particle board Grade -1 medium density flat pressed, three layer and graded (FPT-1) conforming to IS :3087 bonded with BWP type synthetic resin adhesive as per IS :848 and prelamination conforming to IS :12823 Grade-1 Type II sqm 139.20 2894.90 402,961.68 139.20 402962 0 0 0 0 0 0 0 0

46 9.1 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). 0 0 0 0 0 0 0 0 0

47 9.20 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1 st class hard wood and well matched teak 3 ply veneering th vertical grains or cross bands and face veneers on both faces of shutters. 0 0 0 0 0 0 0 0 0

9.20.3 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws sqm 183.08 2271.90 415,934.91 183.08 415935 0 0 0 0 0 0 0 0

48 9.18.2 Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). sqm 616.86 1371.00 845,715.06 616.86 845715 0 0 0 0 0 0 0 0

49 9.96 Providing and fixing aluminium door Fittings, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete: 0 0 0 0 0 0 0 0 0

Sliding Door Bolt 0 0 0 0 0 0 0 0 0

50 9.97 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ), transparent or dyed to required colour or shade, with necessary screws etc. complete: 0 0 0 0 0 0 0 0 0

51 9.100 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete: 0 0 0 0 0 0 0 0 0

52 9.101 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. 0 0 0 0 0 0 0 0 0

53 13.80A.2 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. sqm 4973.93 105.40 524,251.70 4973.93 524252 0 0 0 0 0 0 0 0

54 13.77 Distempering with oil bound washa ble distemper of approved brand and manufacture to give an even shade 0 0 0 0 0 0 0 0 0

13.77.1 New work (two or more coats ) over and including priming coat with cement primer sqm 4973.93 102.30 508,832.53 4973.93 508833 0 0 0 0 0 0 0 0

55 13.46 Finishing walls with Acrylic Smooth exterior paint of required shade : 0 0 0 0 0 0 0 0 0

13.46.1 New work (Two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) sqm 3584.90 137.00 491,131.44 1781.39 1803.51 244051 0 0 0 0 0 247081 0 0

56 13.93 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: 0 0 0 0 0 0 0 0 0

57 13.116 Forming groove of uniform size from 12x12 mm and upto 25x15 mm in plastered surface as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repairs to the edges of plaster panel and finishing the groove complete as per specifications and direction of the Engineer-in-Charge. m 1844.00 47.10 86,852.40 1844.00 0 0 0 0 0 0 86852 0 0

58 16.9 Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having water absorption less than 0.5% and conforming to IS: 15622, of approved make in all colours and shades in outdo sqm 18.90 1464.30 27,675.27 18.90 27675 0 0 0 0 0 0 0 0

59 9.60 Providing and fixing oxidised M.S. double acting spring hinges with necessary screws etc. complete. 0 0 0 0 0 0 0 0 0

60 5.33B Add or deduct for providing richer or leaner mixes respectively at all floor levels. 0 0 0 0 0 0 0 0 0

5.33.B.2 Providing M-30 grade R.C.C. instead of M-20 grade R.C.C. cum 15.95 225.40 3,595.13 15.95 3595 0 0 0 0 0 0 0 0

61 9.150 Providing and fixing zinc alloyed (white powder coated) touch lock for Upvc sliding window with necessary screws etc. complete. nos. 164.00 160.80 26,371.20 164.00 26371 0 0 0 0 0 0 0 0

62 9.148 Providing and fixing stainless steel (SS-304 grade) friction hinges to the side/ top hung uPVC windows,of approved quality, with necessary stainless steel screws etc. as per direction of Engineer-incharge. 0 0 0 0 0 0 0 0 0

63 9.151 Providing and fixing steel roller for uPVC sliding window with necessary screws etc. complete. nos. 328.00 88.60 29,060.80 328.00 29061 0 0 0 0 0 0 0 0

65 Carriage of materials 0 0 0 0 0 0 0 0 0

66 16.78 Construction of granular sub-base by providing close graded Material conforming tospecifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts 0 0 0 0 0 0 0 0 0

16.78.2 With material conforming to Grade-II (size range 53mm to 0.075 mm ) having CBR Value-25 cum 68.40 1239.40 84,774.96 68.4 0 0 0 0 0 0 0 84775 0

67 11.79 Providing and laying factory made chamfered edge Cement Concrete paver blocks of required strength,thickness & size/shape, made by table vibratory method , to attain superior smooth finish using PU or equivalent moulds, laid in required Grey colour & pattern over 50mm thick compacted bed of coarse sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with jamuna sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks,lawns, drive ways or light traffic parking etc. all complete as per manufacturer’s specifications & direction of Engineer -in-Charge: 0 0 0 0 0 0 0 0 0

11.79.1 (a) 80 mm thick c.c. paver block of M-35 grade with approved colour design and pattern. sqm 456.00 956.40 436,118.40 456 0 0 0 0 0 0 0 436118 0

68 5.1 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring,shuttering,finishing and reinforcement-All work puto plinth level 0 0 0 0 0 0 0 0 0

5.1.2 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20 mm nominal size) cum 0.74 4688.30 3,480.59 0.7424 0 0 0 0 0 0 0 0 3481

69 17.1 Providing and fixing water closet squatting pan (Indian type W.C pan) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C flushing cistern with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required: 0 0 0 0 0 0 0 0 0

17.1.1 White Vitreous china Orissa pattern W.C pan of size 580x440mm with integral type foot rests. Each 13.00 4470.90 58,122.00 13 0 58122 0 0 0 0 0 0 0

70 17.2 Providing and fixing white vitreous china pedestal type water closet (European type W.C pan) with seat and lid, 10 litre low level white P.V.C flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 0 0 0 0 0 0 0 0 0

17.2.1 W.C pan with ISI marked white solid plastic seat and lid Each 4.00 4230.00 16,920.00 4 0 16920 0 0 0 0 0 0 0

71 17.7 Providing and fixing wash basin with C.I brackets, 15mm C.P brass pillar taps, 32mm C.P brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 0 0 0 0 0 0 0 0 0

17.7.1 White Vitreous China Flat back wash basin size 550x400mm with single 15mm C.P brass pillar tap. Each 17.00 2764.40 46,995.00 17 0 46995 0 0 0 0 0 0 0

72 17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required: 0 0 0 0 0 0 0 0 0

17.10.2 Kitchen sink without drain board 0 0 0 0 0 0 0 0 0

73 17.28 Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete. 0 0 0 0 0 0 0 0 0

17.28.2 Flexible pipe 0 0 0 0 0 0 0 0 0

74 17.32.2 Providing and fixing mirror of superior glass and of required shape and size with plastic molded frame of rectangular shape 453x357 mm. including all cost of labour, materials, taxes, etc. all complete. Each 17.00 857.00 14,569.00 17 0 14569 0 0 0 0 0 0 0

75 17.33 Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P brass brackets and guard rail complete fixed with 40mm long screws, rawl plugs etc. complete. Each 17.00 713.30 12,126.00 17 0 12126 0 0 0 0 0 0 0

76 17.73.1 Providing and fixing PTMT towerl rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. Each 29.00 397.30 11,522.00 29 0 11522 0 0 0 0 0 0 0

77 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 0 0 0 0 0 0 0 0 0

78 18.10 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including, cutting and making good the walls etc. 0 0 0 0 0 0 0 0 0

Internal work-Exposed on wall 0 0 0 0 0 0 0 0 0

79 18.17 Providing and fixing brass gate valve with C.I. wheel of approved quality (screwed end). 0 0 0 0 0 0 0 0 0

80 18.19 Providing and fixing gun metal non-return valve of approved quality (screwed end). 0 0 0 0 0 0 0 0 0

81 18.49 Providing and fixing 15 mm. dia. C.P. brass bib cock of approved brand and manufacture etc. all complete jobs. Each 60.00 434.20 26,052.00 60 0 26052 0 0 0 0 0 0 0

82 18.50.1 Providing and fixing 15 mm. dia. C.P. brass long nose bib cock of approved brand and manufacture etc. all complete jobs. Each 20.00 715.10 14,302.00 20 0 14302 0 0 0 0 0 0 0

83 18.52.2 Providing and fixing 15 mm. dia. C.P. brass stop cock of approved brand and manufacture etc. all complete jobs. Each 46.00 594.80 27,361.00 46 0 27361 0 0 0 0 0 0 0

84 18.53.1 Providing and fixing 15 mm. dia. C.P. brass angle valve for basin mixer and geyser points of approved brand and manufacture etc. all complete jobs. Each 17.00 500.40 8,507.00 17 0 8507 0 0 0 0 0 0 0

85 18.21.1 Providing and fixing 20 mm. nominal bore unplasticised PVC connection pipe with brass ions of approved brand and manufacture etc. all complete jobs. Each 65.00 74.80 4,862.00 65 0 4862 0 0 0 0 0 0 0

86 17.16A Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. Each 4.00 299.40 1,198.00 4 0 1198 0 0 0 0 0 0 0

87 18.22.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : Each 16.00 190.10 3,042.00 16 0 3042 0 0 0 0 0 0 0

88 19.30.1.1 Constructing brick masonry chamber for underground inspection chamber with bricks in C.M. (1:4) 455x61 mm. Inside dimensions 455x610 mm. and 45 cm. deep for single pipe line etc. all complete jobs. Each 18.00 4266.80 76,802.00 10 8 0 42668 0 0 0 0 0 0 34134

89 18.46 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc.complete (new work) 0 0 0 0 0 0 0 0 0

90 18.58 Providing and fixing PTMT grating of approved quality and colour. 0 0 0 0 0 0 0 0 0

18.58.2 Rectangular type with openable circular lid 0 0 0 0 0 0 0 0 0

18.58.2.1 150 mm nominal size square,18 mm high with 100 mm dia of the inner hinged round grating. Each 44.00 169.70 7,467.00 44 0 7467 0 0 0 0 0 0 0

91 18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements. Weighing not less than 106 gms. Each 17.00 96.80 1,646.00 17 0 1646 0 0 0 0 0 0 0

92 12.78 Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 0 0 0 0 0 0 0 0 0

93 12.79 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 0 0 0 0 0 0 0 0 0

(ii) Plain band 0 0 0 0 0 0 0 0 0

(iii) Single Tee With Door 0 0 0 0 0 0 0 0 0

94 12.80 Providing and fixing unplasticised -PVC pipe clip of approved design to unplasticised PVC rain water pipe by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar(1:4) 1 cement: 4corsa sand and making good the wall etc complete 0 0 0 0 0 0 0 0 0

95 19.6 Providing, laying non-pressure NP-2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement motor in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete. 0 0 0 0 0 0 0 0 0

96 19.32 Making soak pit 2.5m diameter 3.0 metre deep with 45x45cm dry brick honey comb shaft with bricks of class designation 75 and S.W drain pipe 100 mm diameter, 1.8m long complete as per standard design. 0 0 0 0 0 0 0 0 0

98 24.1 Boring /drilling bore well of required dia for casing / strainer pipe, by suitable method prescribed in IS : 2800 (part I), including collecting samples form different strata, preparing and submitting strata chart / bore log, including hire & running Charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-Charge, upto 90 metre depth below ground level, all type of soil. 0 0 0 0 0 0 0 0 0

99 24.3 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 0 0 0 0 0 0 0 0 0

100 24.4 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 0 0 0 0 0 0 0 0 0

101 24.5 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-incharge. cum 1.21 1188.90 1,436.00 1.208 0 0 0 0 0 0 0 0 1436

102 24.6 Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. cum 1.21 1195.60 1,444.00 1.208 0 0 0 0 0 0 0 0 1444

103 24.7 Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge. cum 1.21 1195.60 1,444.00 1.208 0 0 0 0 0 0 0 0 1444

104 24.8 Gravel packing in tube well construction in accordance with IS: 4097 including providing gravel fine / medium / coarse, in required grading and size as per actual requirement all complete as per direction of E/I. m3 4.00 1343.20 5,373.00 4 0 0 5373 0 0 0 0 0 0

105 24.13 Providing and fixing suitable size threated mild steel cap or spot welded plate to the top of bore well housing / Casting pipe, removable as per requirement, all complete for borewell of : 0 0 0 0 0 0 0 0 0

106 24.12 Development of tube well in accordance with IS : 2800 (part I ) and IS : 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by 'V' notch method or any approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory,i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. hour 8.00 916.80 7,334.00 8 0 0 7334 0 0 0 0 0 0

107 24.14 Providing and fixing M.S. clamp of required dia to the top of casing / housing pipe of tube well as per IS : 2800 (part I ), including necessary bots & nuts of required size complete. 0 0 0 0 0 0 0 0 0

108 24.15 Providing and fixing Ball plug / Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS : 2800 (Part I) 0 0 0 0 0 0 0 0 0

109 18.10.5 Providing and fixing 40 mm. dia. nominal bore G I pipes complete with G.I. fittings of approved brand and manufacture etc. all complete jobs. m 40.00 589.20 23,568.00 40 0 0 23568 0 0 0 0 0 0

110 18.46.5 Providing and fixing 40 mm. dia. nominal bore G.I. union in G.I. pipe line cutting and threading the pipe and making long screws etc. all complete jobs. Each 5.00 419.70 2,099.00 5 0 0 2099 0 0 0 0 0 0

111 Approved Supplying and fittings 2 HP Submersible water pump with starter cables etc. all necessary fitting etc. all complete jobs. Set 1.00 26000.00 26,000.00 1 0 0 26000 0 0 0 0 0 0

112 7.0 Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS:1239 including Welding, fittings like elbows, tees, flanges,tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 0 0 0 0 0 0 0 0 0

113 9 Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : 0 0 0 0 0 0 0 0 0

9.2 Single headed Stainless steel Set 6.00 5722.00 34,332.00 6 0 0 0 0 34332 0 0 0 0

114 10 Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/ Stainless Steel cap and chain as required : 0 0 0 0 0 0 0 0 0

10.2 Single headed Stainless steel set 4.00 5722.00 22,888.00 4 0 0 0 0 22888 0 0 0 0

115 11 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 0 0 0 0 0 0 0 0 0

116 13 Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required. EACH 4.00 1236.00 4,944.00 4 0 0 0 0 4944 0 0 0 0

117 14 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 0 0 0 0 0 0 0 0 0

118 15 Providing, installation, testing and commissioning of stainless steel Ystrainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. 0 0 0 0 0 0 0 0 0

119 16 Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : 0 0 0 0 0 0 0 0 0

120 Approved m,S Hose CABINET WITH DOOR FABRICATED 16G M S sheet with full glass door and fire alarm system locking arrangement suitable to accomodate hydrant landing valve fire hose sill two nos 15 mm approx size 1.2 m x2.1 m EACH 6.00 2800.00 16,800.00 6 0 0 0 0 16800 0 0 0 0

121 17 Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. "Connections from riser with 25 mm dia stop gun metalvalve & M.S. Pipe and socket." 0 0 0 0 0 0 0 0 0

122 18 Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : 0 0 0 0 0 0 0 0 0

123 19 Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : 0 0 0 0 0 0 0 0 0

124 20 Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required. EACH 1.00 17707.00 17,707.00 1 0 0 0 0 17707 0 0 0 0

125 22 Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. EACH 3.00 1442.00 4,326.00 3 0 0 0 0 4326 0 0 0 0

126 4 Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump)(a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 (b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. (d) Suitable cement concrete foundation duly plastered and with anti vibration pads. 0 0 0 0 0 0 0 0 0

127 5.1 INCOMING 250A, 50kA 4 Pole MCCB, Ics=100% Icu rating Digital Voltmeter 0- 500V with selector switch Digital Ammeter (0-250 A) with selector swtich & CTs etc. LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar 300A OUTGOING ( Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps) Main Fire Pump 125 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 60 HP pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. Jockey Pump 63 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. set 1.00 248187.00 248,187.00 1 0 0 0 0 248187 0 0 0 0

128 Approved Providing and fixing heavy duty aluminium armored cables 1.1 KVA grade including necessary support clamps at ceiling 0 0 0 0 0 0 0 0 0

129 Approved Providing & fixing of ABC Powder type (Stored Pressure) Firt Extingtiishet 6 Kg. Capacity,. III Mark (IS:15683), Glled with MAP Powder, Complete in !all respect.. EACH 9.00 2200.00 19,800.00 9 0 0 0 0 19800 0 0 0 0

130 Approved Providing & Jixing of Carbon Dloxlde (CO2) type fire extinguisher 4.5 Kg. Capacity, ISI Mk (IS:15683), fitted with 1 Mtr. Hose & PVC Horn, Complete EACH 9.00 7500.00 67,500.00 9 0 0 0 0 67500 0 0 0 0

131 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.Separate Water Tank 10,000 Ltr. Capacity required on Terrace ltr. 10000.00 9.70 97,000.00 10000 0 0 0 0 97000 0 0 0 0

132 Approved Single Metal Bed (Without Mattress) with 8mm Ply on mattress area-| Bed SIZE(IN MM): 1981 X 977 * MATERIAL : METAL. Bed frame made up of mild steel heavy duty. The frame joints are all mig welded and grounded for better finish. The frame to be powder coated. The Product Should be Certified Company BIFMA,ISO- |50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC EACH 102.00 15660.00 1,597,320.00 102 0 0 0 0 0 1597320 0 0 0

133 Approved Mattress 2" thick (Size75"x36") Supplying and fixing of Mattress (Size75"x36"x2) at site. The Product should be green guard. The Product should be PEFC,FSC,BIFMA,Green Gaurd,AGSI & ISO.14001,18001 Certified. EACH 102.00 4704.00 479,808.00 102 0 0 0 0 0 479808 0 0 0

134 Approved SLOTED ANGLE RACK * (L)900MM X (D)450MM X (H)2MTS SLOTTED ANGLE RACKS WITH 7 PANELS ANGLE : 40 X 40 X 2MM PANELS: 20 GAUGE. The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC. EACH 1.00 9682.00 9,682.00 1 0 0 0 0 0 9682 0 0 0

135 Approved Visitor Chair Size (W)490mm X (D)470mm X (H)680mm). Multipurpose fixed cantiliver chair & armrest with pading & metal base. Seat & Back made up of 14mm thick boiling water proof plywood os ISI303. Standard on every executive with task chair & controls rate and ease with which chair reclines to different weight and strengths of users. Quick and easy adjustment regulated height of chair relative to floor. The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC. EACH 3.00 7820.00 23,460.00 3 0 0 0 0 0 23460 0 0 0

136 Approved Library Table-Library Table Size : 2400L x 1200W x 740Ht.25mm thk. Prelam Particle board tabletop with PVC edge banding.Tabletop supported with Powder coated "C" shape metal legs of size 50mm x 50mm and connectors of size 50mm x 50mm. (Table Top PLPB should be in round corner). The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC. EACH 3.00 30654.00 91,962.00 3 0 0 0 0 0 91962 0 0 0

137 Approved 2 Door Book Case- 2 Door File Cabinet - Size (800x381x1970)mm. 2 Door file cabinet. On the top shelf for display with two glass door. With ample storage facility. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology Color-Wenge. The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC EACH 1.00 28224.00 28,224.00 1 0 0 0 0 0 28224 0 0 0

138 Approved 4 DOOR GLASS BOKK CASE :(L)838MM X (D)305MM X (H)1676MM * BOOKCASE 4 DOORS WITH CAM * BODY: 22 GAUGE * DOORS: 20 GAUGE. The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC. EACH 4.00 23696.00 94,784.00 4 0 0 0 0 0 94784 0 0 0

139 Approved Study Table - TABLE TOP IN 18MM THICK PRELAMINATED BOARD WITH UNDERSTRACTURE MADE OF POWDER COATED SINGLE UNIT WITH METAL MESH SHELF FOR BOOKS TABLE SIZE: 700MML X 450MMD X 740MMH. * SCRATCHPROOF EASY WIPE TOP * METAL SHELF & WIRE SHELF WITH BAG HOOK * DURABLE ,STRONG & SAFE. The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC. EACH 102.00 6125.00 624,750.00 102 0 0 0 0 0 624750 0 0 0

140 Approved Study Chair - CHAIR SIZE: 355MML X 381MMD X 780MMH. FIBER SEAT* SCRATCHPROOF EASY WIPE TOP SUPPORTED WITH UNDERSTRACTURE MADE OF POWDER COATED. The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC. EACH 102.00 5370.00 547,740.00 102 0 0 0 0 0 547740 0 0 0

141 Approved Dining table-Size : 2400L x 1200W x 740Ht.25mm thk. Prelam Particle board tabletop with PVC edge banding.Tabletop supported with Powder coated "C" shape metal legs of size 50mm x 50mm and connectors of size 50mm x 50mm. (Table Top PLPB should be in round corner). The Product should be green guard. The Product should be PEFC,FSC,BIFMA,Green Gaurd,AGSI & ISO.14001,18001 Certified EACH 8.00 22344.00 178,752.00 8 0 0 0 0 0 178752 0 0 0

142 Approved Stackable Café Chair : Size: (L)381mm X (D)419mm X (H)839mm Seat and back in PVC Moulded Chair with SS 202 grade frame Round Pipe. The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC. EACH 64.00 4704.00 301,056.00 64 0 0 0 0 0 301056 0 0 0

143 Approved Cantiliver Chair - Chair Size (W)595mm X (D)510mm X (H)875mm. Multi-purpose fixed chair,Metal frame,PU Padding on armrest. Cushion upholstery in leatherette with four leg metal legs with matt finish. The Product should be PEFC,FSC,BIFMA,Green Gaurd,AGSI & ISO.14001,18001 Certified. Color-Black. The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC. EACH 12.00 8820.00 105,840.00 12 0 0 0 0 0 105840 0 0 0

144 Approved Table with side unit return- Table Size(1500x750x750)mm with 25 mm thk top & Side runner Size(750x450x750)mm with 25 mm thk. Table made of 25 mm thk pre lam particle board with edge banding. Table top supported with 25 mm side panel & fron panel. Kyeboard tray & cpu trolly. Table top with wire manager & interchangable side runner with fixed pedestal of 3 drawers. Phenol bond using in Pre-Laminated Particle Board & Edge band thickness will be start from 2mm for Top & 1mm for rest parts. Our PLPB certified from ISI grade & Termite, Borer & Fungus resistance laminated outside in selected color & inside (Non Visible Part) will be balancing white. 100% European design & texture & 100% Product Consistency, fade resistance lamination best International Technology. Color-Wenge.The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC EACH 1.00 36064.00 36,064.00 1 0 0 0 0 0 36064 0 0 0

145 Approved High Back Chair Size (Back Height-670xBack Width-470)mm & (Seat Depth-485xSeat Width-475)mm with Min-Max Height (460-540)mm. Nylon base chair with push back mechanism & Fix handle. Nylon base chair with push back mechanism. Back & seat cover cushion chair uphlostered in fabric & adjustable armrest locks any position. Syncro mechenism with locking system and five star chrome base with nylon casters. Seat & Back made up of 14mm thick boiling water proof plywood os ISI303. Chair rotates a full 360 degree in either direction for ease of motion. Standard on every executive with task chair & controls rate and ease with which chair reclines to different weight and strengths of users. Quick and easy adjustment regulated height of chair relative to floor. Back reclines at A 2-to-1 ratio to the seat. 5% post consumed recycled content & 30% total recycled content. The Product Should be Certified Company BIFMA,ISO-50001,Green Guard/Green PRO, Sedex,AIOTA, IGBC, AGSI,FSC & PEFC. Color-Black EACH 1.00 14602.00 14,602.00 1 0 0 0 0 0 14602 0 0 0

146 Approved 3 Seater Chrome Chair Length 1775mm x Depth 690mm x Height 755mm 1)Seat & back single section 2)Seat is 410 mm from ground 3)Perforated mild steel powder coated 4)Seat thickness 1.2 mm 5)Seat width 520 mm 6)Beam MILD steel with black power coating thickness 1.6mm 7) Mild steel border with chrome plating for every seat & back 8) Mild steel handles chrome plated & die pressed legs at the end of chairs 9) Gross weight of regular 3-seater will be 31 kg. EACH 2.00 16640.00 33,280.00 2 0 0 0 0 0 33280 0 0 0

Sl. No. Code No. Particular Qty. Unit Rate Amount

1 1.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with modular switch , modular plate, suitable size G.I. box etc as required.

Total Points 458

2 1.5 Wiring for light/ power plug with 2 X 4 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit along with 1 Nos 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. 330 p. mtrs. 309.00 101,970.00

3 1.7 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

1.7.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire 1200 p. mtrs. 201.00 241,200.00

1.7.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire (1 PHASE DB) 40 p. mtrs. 422.00 16,880.00

1.7.11 4 X 6 sq. mm + 1 X 6 sq. mm earth wire(FOR LIGHT DB) 340 p. mtrs. 660.00 224,400.00

1.7.13 4 X 16 sq. mm + 1 X 6 sq. mm earth wire (FOR POWER DB) 120 p. mtrs. 1,312.00 157,440.00

4 1.31 Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface or recess including providing and fixing 3 pin, 5/6 amps modular socket outlet and 5/6 amps modular type switch connection, painting etc. as required. 71 Each 414.00 29,394.00

5 1.32 Supplying and fixing suitable size of G.I. box with modular plate and cover in front or in surface or in recess including providing and fixing 6 pin, 20/16 amps modular socket outlet and 20/16 amps modular switch. connection, painting etc, as required. 22 Each 531.00 11,682.00

6 1.33 Supplying and fixing 2 pin, 6 amp. ceiling rose on the existing junction box/PVC box including connection etc as required. 275 Each 64.00 17,600.00

7 1.34 Supplying and fixing batten/angle holder including connection etc. as required. 129 Each 80.00 10,320.00

8 1.25 Supplying and fixing stepped type electronic Fan regulator on the existing modular plate switch box including connections but excluding modular plate etc as required. 123 Each 358.00 44,034.00

9 1.55 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 amps modular socket outlet and 2 nos. 5/6 amps modular switch, connection etc. as required. 112 Each 632.00 70,784.00

10 2.8 S/F/F Way Single Pole & neutral, sheet steel, MCB distribution board, 240V on surface/recess, complete with tinned copper busbar,neutral busbar,earth bar, din bar inerconnections, power painted including earthing etc as reqd.(But without MCB/RCCB/Isolator)

2.8.6 8 way, Double door 3 Each 2,591.00 7,773.00

11 2.9 Supplying and fixing following way, horizontal type three pole & neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus - bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

2.9.1 4 way ( 4 + 12 ), Double door, horizontal type 23 Each 4,184.00 96,232.00

12 2.12 Supplying and fixing following rating, 240/415 volts, ‘C’ series, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

2.12.1 6/32 amps, single pole 294 Each 237.00 69,678.00

13 2.13 Supplying and fixing following rating, double Pole, 240 volts, ‘C’ series, miniature circuit breaker suitable for inductive loads in the existing MCB DB complete with connections, testing and commissioning etc. as required.

2.13.3 40 A to 63 A, double pole 8 Each 1,198.00 9,584.00

14 2.4 Providing and fixing following rating and breaking capacity and pole MCCB with thrmomagnetic release and terminal spreaders in existing panel board including drilling holes in cubicle panel, making connections etc. as required.

15 2.7 Providing and fixing following capacity four pole ON-load/ panel mounted changeover switches inside the existing cubical panel board including drilling holes in cubicle panel, making connections etc. as required.

16 5.1 Supplying and fixing 4' X 18 watt LED batten with minimum efficacy 100 lm/w in polycarbonate housing and complete with integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor etc. as required. 135 Each 521.00 70,335.00

17 5.8 Supplying and fixing surface mounted following types LED downlighter with minimum efficacy 100 lm/w in pressure die-cast aluminium housing and integrated electronic driver etc directly on ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required.

18 6.1 Supplying and fixing of following types lamp in the existing electrical fitting / fixtures etc. as required.

6.1.5 12 watt LED lamp 34 Each 239.00 8,126.00

6.1.6 15 watt LED lamp 95 Each 250.00 23,750.00

19 2.33 Supplying and fixing following ways, surface/recess mounting, Vertical three phase distribution board ( VTPN DB's ) of CRCA sheet steel, dust protected, duly powder painted suitable for upto 160 amp, four pole MCCB as Incomer and SP/TP MCB's as outgoing inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's etc as required. (but without MCCB & MCBs)

2.33.1 4 ways , Double door, I/C 160 A, MCCB 6 Each 12,107.00 72,642.00

20 2.12 Supplying and fixing following rating, 240/415 volts, ‘C’ curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

21 8.11 Supply and fixing of fabricated Electrical control panel of cubical construction, floor/wall mounted type, fabricated out of 16 SWG CRCA sheet, compartmentalised with hinged doors, dust and vermin proof, powder coated painting of approved shade after 7 tank treatment process, cable alley, internal wiring, earth terminals, Bus bar Chamber, insulator and complete in all respect etc and panel manufactures must be approved by CPRI. (But without RYB inicator, ammeter, voltmeter, inter-connection copper conductor cable/solid copper strip, switchgears etc.) 25 S.ft 1,809.00 45,225.00

22 A-R Supplying of copper strip of 50mm X5mm size for bus bar strip/interconnection including drilling holes etc. as required 9 Each 871.00 7,839.00

23 8.13 Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc as required. 1 Each 6,536.00 6,536.00

24 7.9 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed PVC conduit as required.

25 3.6 Earthing with Copper earth Plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe 2.7 meter long etc. with charcoal/ coke and salt as required. 2 P. Set 13,721.00 27,442.00

26 3.17 Supplying & fixing 4.00 mm dia copper wire on surface or in recess for loop earthing etc as reqd. 40 P. mtr. 144.00 5,760.00

27 5.14 Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, IP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required.

28 8.4 Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required.

29 7.7 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required.

30 7.3 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required but excluding sand cushioning and protective covering.

7.3.3 Above 95 sq. mm and upto 185 sq. mm 60 p. mtrs. 143.00 8,580.00

31 DSR/19.1 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star reated, ceiling fan with BLDC motor, class of nsulation: B, 3 nos blades, 30 cm long down rod, 2 nos conopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service value (CM/MM) minimum 6.00, Air delivery minimum 210 cum/min, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise = 75 degree C (max), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, earthing etc. complete as required. 122 Each 2,730.00 333,060.00

32 8.17 Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required.

8.17.2 380 mm sweep(FOR KITCHEN) 2 Each 5,560.00 11,120.00

33 3.7 Supply and laying 6 SWG G.I. wire at 0.50 meter below ground level for conductor earth electrode, including connection/terminationwith GI thimbleas required. 180 Meter 37.00 6,660.00

LIGHTING ARRESTER

34 4.1 Providing and fixing lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 3 mm thick copper baseplate includingholes etc.complete as required. 6 Each 1,056.00 6,336.00

35 4.4 Jointing copper/ G.I. tape ( with another copper/ G I tape, base of the finial or any other metallic object ) by riverting/ nut bolting sweating and soldering etc. as required. 48 Each 81.00 3,888.00

36 4.7 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For horizontal run) 240 Meter 102.00 24,480.00

37 4.8 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For vertical run) 50 Meter 145.00 7,250.00

38 3.2 Earthing with G.I. earth plate 4.5 meter long, 40 mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering watering pipe etc. with charcoal/ coke and salt as required. 12 P. Set 6,323.00 75,876.00

39 4.14 Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required. 65 Each 174.00 11,310.00

FOR CAMPUS LIGHT

40 8.21 Supply and erection of 4 metre height Hot-dip galvanized octagonal street light pole with following arm with top dia 70 mm and bottom dia A/F 130 mm, made of 3 mm thick sheet along with base plate of size 220 X 220 X 12 mm , small door opening for junction box mounting including 6A 'C' series SP MCB, connector, and suitable size foundation bolts with template as required.(but without pole foundation)

41 5.14 Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, IP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required.

42 8.3 Providing and making steel pole collar with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 stone aggregate 20 mm ) of specified size and shapeincluding form work, plastering if required, curing etc. as required. (volume of pole/pipe not to be deducted) 4 Cum 7,501.00 30,004.00

43 3.2 Earthing with G.I. earth plate 4.5 meter long, 40 mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering watering pipe etc. with charcoal/ coke and salt as required. 2 P. Set 6,323.00 12,646.00

44 3.7 Supply and laying 6 SWG G.I. wire at 0.50 meter below ground level for conductor earth electrode, including connection/terminationwith GI thimbleas required. 20 Meter 37.00 740.00

45 7.7 Supply of following sizes and core PVC / XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required.

46 7.3 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required but excluding sand cushioning and protective covering.

47 3.16 Providing & fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing etc. as required. 300 Meter 53.00 15,900.00

48 1.15 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed PVC conduit as reqd.

FOR SOLAR PHOTO VOLTAIC POWER GENERATION SYSTEM

49 DSR Supply, Installation, Testing and Commissioning of orgrid solar Photovoltaic Power Plant conforming to MNRE specification as amended, cousisting of Mono/Poly Crystalline silicon solar cells, net metering facility, necessary protection, earthing, mounted on Aluminium/GI structure of suitable strenght with following components coupletes as required:- (a) Solar Photovoltaic Module of capacity 330 Wp or above, manufactured in India, Conforming to IS 14286/IEC 61215, IS/IEC 6170-Part-1, IS/IEC 6170-part-2, Solar Photovoltaic Module conversion efficiency shall not be less than 16.5% PV moules used in solar power plants/systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. (b) Power conditioning Unit (PUC) of 350-800 V CD Imput voltage range and 400 V AC, three phase, 4 wire, 50HZ +/- 2.5 Hz, output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 degree C. The PCU shall adjust the voltage and frequency level to suit the Grid Voltage Frequency. (c) Data Monitoring System complete with accessories. (d) Fixing of Array junction box & Main junction box with IP 65 portection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required. (e) Lighting and surge voltage protection. (f) Connections and interconnections by supplying & fixing required size XPLE insulated copper conductor 1.1 kv grade armoured power and control cables between solar modules, main power cable to grid supply PCU unit along with supplying & fixing of necessary channel/conduit lugs and other accessories etc. as required. 12 KWP 64,332.00 771,984.00

TOTAL PART 'A' 4,380,614.00

PART-B FOR FIRE ALARM & DETECTION SYSTEM

50 DSR 17.1.9 Supply, Installation , Testing and Commissioning of sector peanel suitable for following zone complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required.

51 DSR 17.1.2 Supply, Installation, Testing and Commissioning of smoke detector with buuiltin LED and mounting base complete with all connection etc. as requied. 80 Each 1,153.00 92,240.00

52 DSR 17.1.4 Supply, Installation, Testing and Commissioning of Manual call boxes of ABS type in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required. 3 Each 408.00 1,224.00

53 DSR 17.1.7 Supply, Installation, Testing and Commissioning fire alarm sounder facility to make announcement, mounted in ABS box with hinged plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required. 3 Each 491.00 1,473.00

54 DSR 17.5.1 Supply & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of cross linkable ethylene propylene rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required. 800 Each 359.00 287,200.00

TOTAL 391,003.00

Add GST @ 5.36% as per BCD letter No. 5751 Date 18/07/2023 20,957.76

TOTAL PART-B 411,960.76

NON SCHEDULE ITEM

55 NS SITC of 2MP IR Builet Fixed Camera - 1/2.8" Progressive scan CMOS, 1920 X 1080 at 25fps, 2.8 mm Fixed lens, 0.01 Lux at F 1.2, 0 Lux with IR, ICR, ONVIF (PROFILES), support H.265, H.264, MJPEG, DWDR, 3D Digital Noise Reductio, Three individually configurable stream, 12 VDC & PoE, IR range: 40m, IP67 Edge Anlaytics- Line crossing detection, Intrusion delection, Video tamering, UL, CE, FCC certified. (DS-2CD3021G0-I (2.8mm) (Approved Makes: HIK vision/Honeywell/Bosch) 8 Nos 5,250.00 42,000.00

56 NS SITC of 2MP IR Indoor Dome Fixed Camera - 1/2.8" Progressive scan CMOS, 1920 X 1080 at 25fps, 2.8 mm Fixed lens, 0.01 Lux at F 1.2, 0 Lux with IR, ICR, ONVIF , support H.265, H.264, MJPEG, DWDR, 3D Digital Noise Reductio, Triple individually configurable stream, 12 VDC & PoE, IR range: 40m, IP67, IK10, Edge Anlaytics- Line crossing detection, Intrusion delection, Motion detection, Video tamering, UL, CE, FCC certified. (DS-2CD3121G0-I (2.8mm) (Approved Makes: HIK vision/Honeywell/Bosch) 8 Nos 5,150.00 41,200.00

57 NS SITC of 2MP IR Outdoor PTZ Camera - 1/2.8" Progressive Scam CMOS, 1920 X 1080 at 60fps, 4.8 mm to 153 mm, 32XOptical, 16X ditital zoom, color: 0.005 Lux at F1.6, B/W: 0.001 Lux at F1.6, ICR, ONVIF, support H.265, MJPEG, 120 db WDR, 3D Digital Noise Reduction, HLC, BLC, Defog, EIS, Tripple individually configurable stream, 24 VAC & Hi PoE, IR range: 150m, Pan: 360˚ endless, Tilt: From - 15˚ to 90˚ (auto-flip), Pan Speed - from 0.1˚/s to 160˚/s, Preset Speed: 240˚/s, Tilt Speed - from 0.1˚/s to 120˚/s, Preset Speed: 200˚/s, Presets- 300, Alarm Input-2-ch alarm input, Alarm Output-1-ch alarm Output, Audio-1 channel input & output, Support on-board storage up to 256 GB (SD card not included), IP66, IK10, Face Detection, Region Entrance Detection, Line Crossing Detection, Region Entrance Detection, Region Exiting Detection, UL, CE, FCC certified. (HI-PoE Injector under Si Scope, if PoE is used)(Model no DS-2DE7232IW-AE (Camera) + DS-1602ZJ (wall mount Bracket) or DS-1602ZJ-pole (Vertical Pole Mounting Bracket)) (Approved Makes: HIKvision/Honeywell/Bosch)Equivalent 1 Nos 64,200.00 64,200.00

58 NS SITC of Surveillance class Common Micro SD Card 128 GB for camera. (ANR-Automatic Network Replenishment) (Approved Makes: HIKvision/Honeywell/Bosch)/Equivalent 17 Nos 1,760.00 29,920.00

59 NS SITC of 64ch Network Video Recorder- Connect UP to 64 IP cameras, Dual OS, Up to 12 Megapixels Resolution, Two independent HDMI outpuls, one HDMI output of 4k resolution, 1 VGA outut with outut upto 1920 X 1080, Support H.265, MJPEG, Supports N+1 hot spares system, supports RAIDO, RAID 1, RAID5, RAID6 and RAID 10, Supports HDD hot swap, Supports Dual Power-Redundanl, Incoming Bandwilh 320 Mbps, 8 SATA Hard Disks, ANR Technology,, 8 SATA interfaces for 8 HDDs and capacity of each HDD upto 6 TB. 3 X USB at least 1 X USB with 3.0 Alarm I/O 16/4, RS-485, RS-232, 2 RJ-45 10/100/1000 Mbps self-adaptive Ethernet Interface, Multiple network monitoring: Web viewer, CE, FCC, UL certified. (DS-7764NI-I8) (Approved Makes: HIKVision/Honeywell/Bosch) 1 Nos 78,500.00 78,500.00

60 NS SITC of 6 TB Surveillance Hard Disk (ST 6000VX0023) (Approved Makes: HIK Vision/Honeywell/Bosch) 2 Nos 14,850.00 29,700.00

61 NS SITC of 16 port Unmanaged Network PoE Switch: 24 port PoE Switch with PoE standard of IEEE 802.3af, IEEE 802.3at, PoE port, Uplink ports (DS-3 e0326P-E) (Approved Makes: HIK Vision/Honeywell/Bosch) 1 Nos 10,450.00 10,450.00

62 NS SITC of 24 port Unmanaged Network PoE Switch: 24 port PoE Switch with PoE standard of IEEE 802.3af, IEEE 802.3at, PoE port, Uplink ports (DS-3 e0326P-E) (Approved Makes: HIK Vision/Honeywell/Bosch) 1 Nos 20,735.00 20,735.00

63 NS SITC of 8 port Managed Network PoE Switch: 1 Nos 12,650.00 12,650.00

64 NS SITC of Video Management Software - FOC- SOFTWARE 1 Nos 110,330.00 110,330.00

65 NS SITC of Server or high end PC for Video Management Software 1 Nos 93,500.00 93,500.00

66 NS SITC of 32" LCD 24X7 Survelliance Monitor 1 Nos 43,780.00 43,780.00

67 NS SITC of Cat-6 Cable: UTP CAT 6, 305 meter, Core diameter: 0.53mm, OFC, CM, White (Aproved Makes: HIKVision/Honeywell/Bosch) 1000 Mtrs 33.00 33,000.00

68 NS Smart-UPS On-Line, 5.4 kw/6kva with 1 hour Backup 12 V 65 AH SMF Battery UPS Toplogy Double Conversion On-Line, Power Rating (VA / Watts) 5400 watts/6000VA, Form Factor Rack/Tower Convertible; Output Power Capacity 5400 watts/6000 VA, Max Configurable Power 5400watts/6000VA, Nominal Output Voltage 230V, Output Voltage Note Configurable for 220 : 230 or 240 nominal output voltage, Efficiency at Full Load 94.00% Output Voltage Distortion Less than 3%, Output Frequency (sync to mains) 50/60 Hz +/03 Hz, crest Factor 03 : 01, Wave form Type Sine Wave, Output Connection (1) Hard wire 3-wire (8) (H N + G) IEC 320 C 13(8), Bypass Built-in Bypass, Output Short Circuit Protection Yes, Parallel Redundancy (Option) 1 + 1, Nominal Input Voltage 230 V, Input Power Factor>0.98, Input Frequency 40-70 Hz, Input Connections Terminal Block, Protection Thermal Circuit Breaker (250VAC/20A), Input voltage range for main operation full load 160-285V, High Voltage withstand Capability 420 VAC, Green Mode Range 210-250 VAC (230 V), Battery Type Mintenance -free sealed Lead-Acid battery with suspended, electrolyte. 12V 65 Ah SMF battery for 60 Min Battery Back-up. 1 Nos 284,500.00 284,500.00

TOTAL PART 'C' 894,465.00

ELECTRIC 5687040.00