REPAIR MAINT OF AMF PANEL LT PANEL AND REPLACEMENT OF DEFECTIVE MCCB TIMER SWITCH RELAY CONTACTOR PUSH BUTTON LT CABLES OTHER MISC WORK AT NAVAL STATION KARANJA

Amount

Notes : (i) The work consists of 02 jobs as under:- JOB (A) : TPP 2024-2025 Ser No. 69 (ii) Please refer schedule 'A' notes before quoting the tender. (iii) Amount of Schedule of Credit shall be deducted off line by the department. ITEMS FOR JOB 'A'

M&L for checking of AMF panel & DG set for detecting any kind of fault in AMF panel & DG set and attending the fault immediately at any time round the clock and carry out certain repair as per site requirement and checking of AMF panel and DG set for power suply from DG set through AMF panel and replacing of worn out parts of AMF panel & DG set by expert engineer complete all as specified and directed. Notes :- (a) Replacement of worn out parts of AMF panel/DG set shall be measured and paid separately under items of BOQ'. (b) Charges for detecting the fault in AMF Panel/electric system/DG set are included in the quoted item rate.

Supply only of Relay-24 VDC/ 12 VDC / 220 VAC / 240 VAC for AMF panel of DG set complete all as specified and directed.

Supply only of Electronic Timer, auxilary supply-240 VAC/24 VDC for 125 KVA to 200 KVA DG set complete all as specified and directed.

Supply only of Electronic Timer, auxilary supply-240 VAC/24 VDC for 250 KVA to 400 KVA DG set complete all as specified and directed.

Supply only of Electronic Timer, auxilary supply-240 VAC/24 VDC for 500 KVA to 625 KVA DG set complete all as specified and directed.

S&F in replacement of Genset Controller Panel suitable for 125 Kva make and model as per site complete all as specified and directed.

S&F in replacement of Genset Controller Panel suitable for 125 KVA to 250 KVA make and model as per site complete all as specified and directed.

M&L for reset and reprogramming/updated of existing software in control panel of DG set upto 125 KVA complete all as specified and directed.

M&L for reset and reprogramming/updating of existing software in control panel of DG set upto 150 to 250 KVA complete all as specified and directed.

M&L for reset and reprogramming/updating of existing software in control panel of DG set upto 315 to 625 KVA complete all as specified and directed.

S&F in repairs of Contactor- 3/4 Pole,150 Amps/ 140 Amps up to 62.5 KVA DG Set AMF panel with replacement of lugs and checking of all connections etc complete all as specified and directed.

S&F in repairs of Contactor- 3/4 Pole, 225 Amp/ 200 Amp for 62.5 to 150 KVA DG set AMF panel with replacement of lugs and checking of all connections etc complete all as specified and directed.

S&F in repairs of Contactor of 4 Pole, 250 Amps AMF PANEL of DG Set with replacement of cable lugs and checking of all connections etc complete all as specified and directed.

S&F in repairs of Contactor of 4 Pole, 320 Amps for AMF PANEL of DG Set with replacement of cable lugs and checking of all connections etc complete all as specified and directed.

S&F in repairs of Contactor of 4 Pole, 400 Amps for AMF PANEL of DG Set with replacement of cable lugs and checking of all connections etc complete all as specified and directed.

S&F in repairs of Self Engine Stop Relay Device for 63 KVA to 180 KVA DG set AMF panel etc complete all as directed and specified

S&F in repairs of Self Engine Stop Relay Device for 200 KVA to 315 KVA DG set AMF panel etc complete all as directed and specified

S&F in repairs of Self Engine Stop Relay Device for 400 KVA to 625 KVA DG set AMF panel etc complete all as directed and specified

S&F in repairs of AMF Controller device for Auto/ Manual function for upto 200 KVA DG set etc complete all as directed and specified

S&F in repairs of AMF Controller device for Auto/ Manual function for 250 KVA to 500 KVA DG set etc complete all as directed and specified

S&F in repairs of AMF Relay Box for Auto/ Manual function including voltage monitor system and fully auto and manual system for upto 62.5 KVA set etc complete all as directed and specified

S&F in repairs of AMF Relay Box for Auto/ Manual function including voltage monitor system and fully auto and manual system for 62.5 KVA to 200 KVA DG set etc complete all as directed and specified

S&F in repairs of AMF Relay Box for Auto/ Manual function including voltage monitor system and fully auto and manual system for 250 KVA to 500 KVA DG set etc complete all as directed and specified

M&L in replacement wiring of DG Set/AMF panel upto 25 to 50 KVA complete all as specified and directed .

M&Lin replacement wiring of DG Set/AMF panel 62.5 to 100 KVA complete all as specified and directed .

M&L in replacement wiring of DG Set/AMF panel 125 to 320 KVA complete all as specified and directed .

M&L in replacement wiring of DG Set/AMF panel 400 to 625 KVA complete all as specified and directed .

S&F in repairs of AVR suitable for DG Sets complete all as specified and directed DG Set of for following capacity:-

Up to 50 KVA DG set

62.5 to 125 KVA DG set

160 to 320 KVA DG set

400 to 625 KVA DG Set

Supplying, laying, jointing, connecting & testing XLPE/PVC insulated PVC sheathed cable heavy duty 1100 volts grade, aluminum conductor in trenches / ducts of following sizes incl taking out cable complete all as specified and directed:-

3.5 core 50 Sqmm

3.5 core 70 Sqmm

3.5 core 95 Sqmm

3.5 core 120 Sqmm

3.5 core 150 Sqmm

3.5 core 240 Sqmm

Excavation in trenches for not exc 1.5 mtr wide and not exceeding 1.5 mtr depth and getting out in any type of soil including taking out faulty cable/cable covers and GI pipe complete all as specified and directed.

Excavation in trenches for not exc 1.5 mtr wide and not exceeding 1.5 mtr depth and getting out in any type of soil including taking out faulty cable/cable covers and GI pipe complete all as specified and directed.

Returning filling in including spreading levelling watering and well ramming in layers n.exceeding 25cm complete all as specified & directed.

Removing excavated materials n.exc 50m and depositing where directed at a level n.exceding 1.5m above the Starting point complete all as specified & directed.

M&L for dry river sand as sand cushioning for protection of UG cable including punning of sand in layers complete all as specified & directed. Note :- Punned thickness shall be measured and paid seperately.

Supply & laying un-reinforced precast concret cable cover class LV type 1, flat size 250mm x 150mm x 40 mm complete all as specified & directed

Laying only un-reinforced precast concret cable cover class LV type 1, flat size 250mm x 150mm x 40 mm complete all as specified & directed.

S&F in repairs 1.1 KV straight through joint kit 3.5 core 25 sq mm to 50 sqmm complete as specified and directed.

S&F in repairs 1.1 KV straight through joint kit 3.5 core 70 sqmm to 120 sq mm complete as specified and directed.

S&F in repairs 1.1 KV straight through joint kit 3.5 core 150 sq mm to 185 sqmm complete as specified and directed.

M&L GI pipe light grade with all fittings complete laid in trenches all as specified for 80 mm bore of pipe all complete as specified and directed.

M&L for fabrication/Jointing/welding work to repair electric control panel/LT Panel/Feeder Piller box /Bus bar panel any type and any size including repairing of hinges,doors, clamp,handle,angle iron,nut bolts & replacement handle with numric lock etccomplete all as specified and directed

M&L for spray painting to electric control panel/LT Panel/Feeder Piller box /Bus bar panel any type and any size of E/M installations by cleaning the existing old paint with the help of mechanical tools such as wire brush, scraper and sand paper from the surface of panel and painting the prepared surface with two coat of synthatic enamel paint of approved shade over a coat of red oxide primer & hang the danger sign board of 1100 Volt on LT Panel complete all as specified abd specified.

M&L for taking out carefully LT UG cable following sizes after necessary excavation , removing of soil, precast cable cover and setting aside for reuse complete all as specified & directed..

2/3.5/4 core 10 to 16 sqmm

3.5/4 core 25 to 50 Sqmm

3.5 core 70 to 120 SQmm

M&L for relaying of LT UG cable of following sizes obtained from ser No 44 including sand filling, laying of cable cover and filling of soil complete all as specified and directed.

2/3.5/4 core 10 to 16 sqmm

2/3.5/4 core 25 to 50 Sqmm

3.5 core 70 to 120 SQmm

S&F 2.5 SQMM FRLSH PVC insulated single core unsheathed industrial multistrand cable with flame retardent low smoke (FRLSH) properties with flexible bright annealed bare copper conductor for voltage grade upto 1100 V confirming to IS-694:2010 complete all as specified and directed.

S&F 4 SQMM FRLSH PVC insulated single core unsheathed industrial multistrand cable with flame retardent low smoke (FRLSH) properties with flexible bright annealed bare copper conductor for voltage grade upto 1100 V confirming to IS-694:2010 omplete all as specified and directed.

S&F 6 SQMM FRLSH PVC insulated single core unsheathed industrial multistrand cable with flame retardent low smoke (FRLSH) properties with flexible bright annealed bare copper conductor for voltage grade upto 1100 V confirming to IS-694:2010 omplete all as specified and directed.

S&F in repairs MCB SP of 6-32 A ,240 V with breaking capacity 10 KA Conforming to IS/IEC 60898-1:2015 complete all as specified and directed.

S&F in repairs MCB SP of 40 A ,240 V with breaking capacity 10 KA Conforming to IS/IEC 60898-1:2015 complete all as specified and directed.

S&F in repairs MCB DP of 6-32 A ,240 V with breaking capacity 10 KA Conforming to IS/IEC 60898-1:2015 complete all as specified and directed.

S&F in repairs MCB DP of 40 A ,240 V with breaking capacity 10 KA Conforming to IS/IEC 60898-1:2015 complete all as specified and directed.

S&F in repairs on load changeover switch 4 pole of cap 125 A with SS enclosure including spreader terminal kit conforming to IS/IEC-60947-3 complete all as specified and directed.

S&F in repairs on load changeover switch 4 pole of cap 160 A with SS enclosure including spreader terminal kit conforming to IS/IEC-60947-3 complete all as specified and directed.

S&F in repairs load changeover switch 4 pole of cap 200 A with SS enclosure spreader terminal kit conforming to IS/IEC-60947-3 complete all as specified and directed.

S&F in repairs changeover switch 4 pole of cap 250 A with SS enclosure including spreader terminal kit conforming to IS/IEC-60947-3 complete all as specified and directed.

S&F in repairs changeover switch 4 pole of cap 400 A with SS enclosure spreader terminal kit conforming to IS/IEC-60947-3 complete all as specified and directed.

S&F MCCB of 160 A,adjustable type ,3 pole 415 volt 25 kA breaking cap. With adjustable over load,short circuit ,ground fault (3 pole) & fixed instantanous neutral protection(4 pole), conforming to IS/IEC-60947-2 with spreader terminal kit including taking down u/s MCCB complete all as specified and directed.

S&F MCCB of 200 A,adjustable type , 3 pole 415 volt 25 kA breaking cap. With adjustable over load,short circuit ,ground fault (3 pole) & fixed instantanous neutral protection(4 pole), conforming to IS/IEC-60947-2 with spreader terminal kit including taking down u/s MCCB complete all as specified and directed.

S&F MCCB of 250 A,adjustable type , 3 pole 415 volt 36 kA breaking cap. With adjustable over load,short circuit ,ground fault (3 pole) & fixed instantanous neutral protection(4 pole), conforming to IS/IEC-60947-2 with spreader terminal kit including taking down u/s MCCB complete all as specified and directed.

S&F MCCB of 400 A, adjustable type, 3 pole 415 volt 50 kA breaking cap. With adjustable over load,short circuit ,ground fault (3 pole) & fixed instantanous neutral protection(4 pole), conforming to IS/IEC-60947-2 with spreader terminal kit including taking down u/s MCCB complete all as specified and directed.

S&F MCCB of 160 A,adjustable type , 4 pole 415 volt 16 kA breaking cap. With adjustable over load,short circuit ,ground fault (4 pole) & fixed instantanous neutral protection(4 pole), conforming to IS/IEC-60947-2 with spreader terminal kit including taking down u/s MCCB complete all as specified and directed.

S&F MCCB of 200 A,adjustable type , 4 pole 415 volt 25 kA breaking cap. With adjustable over load,short circuit ,ground fault (4 pole) & fixed instantanous neutral protection(4 pole), conforming to IS/IEC-60947-2 with spreader terminal kit including taking down u/s MCCB complete all as specified and directed.

S&F MCCB of 250 A,adjustable type , 4 pole 415 volt 35 kA breaking cap. With adjustable over load,short circuit ,ground fault (4 pole) & fixed instantanous neutral protection(4 pole), conforming to IS/IEC-60947-2 with spreader terminal kit including taking down u/s MCCB complete all as specified and directed.

S & F MCCB of 400 A, adjustable type, 4 pole 415 volt 50 kA breaking cap. With adjustable over load,short circuit ,ground fault (4 pole) & fixed instantanous neutral protection(4 pole), conforming to IS/IEC-60947-2 with spreader terminal kit including taking down u/s MCCB complete all as specified and directed.

S&F aluminium bus bar red,yellow,blue and black colour coded heat shrinkable sleeve of size 25 x 5 mm fixed with suitable ss nut bolts etc in LT Panel including taking down u/s bus bar complete all as specified and directed

S&F aluminium bus bar red,yellow,blue and black colour coded heat shrinkable sleeve of size 40 x 10 mm fixed with suitable ss nut bolts etc in LT Panel including taking down u/s bus bar complete all as specified and directed

S&F aluminium bus bar red,yellow,blue and black colour coded heat shrinkable sleeve of size 60 x 10 mm fixed with suitable ss nut bolts etc in LT Panel including taking down u/s bus bar complete all as specified and directed

S&F in repairs SS nut bolts ,clamp ,screw of different size and sample complete all as specified and directed.

S&F triping indication switch in ACB/MCCB including taking down u/striping indication switch complete all as specified and directed.

S&F spring charge indication switch in ACB/MCCB including taking down u/s spring charge indication switch complete all as specified and directed.

S&F position indication switch in ACB/MCCB including taking down u/s position indication switch complete all as specified and directed.

S&F adaptor type terminal for ACB/MCCB including taking down u/s adaptor type terminal complete all as specified and directed.

R A Electric Co. (BID ID -3084152)

Sagar Electricals (BID ID -3084739)

D.N.PATIL (BID ID -3083705)

somnath engineering corporation (BID ID -3082365)