COMPREHENSIVE MAINTENANCE OF FIRE ALARM SYSTEM AT AHRR ADC AND CTVS CENTRE UNDER GE EM RR HOSPITAL DELHI CANTT10

Amount

Preventive and comprehensive maintenance /Annual maintenance contract of complete fire detection and alarm system(s) installed at multistory AHRR Hospital Bldg, ADC and CTVS Centre in reliable, safe and efficient manner using latest techniques & expertise consultancy by regularly examining the sensor/detector, Main fire alarm control panels, Repeater panels, Hooters, MCP, Sirens etc of various type / capacity / make, including making the non-functional parts of fire alarm system into fully functional condition, attending day to day complaint / fault(s) in general shift of 08 hrs every day incl sunday & holiday, including quarterly cleaning of the detectors and monthly joint testing/inspection of the complete fire alarm system, including replacement of minor items such as wire, lugs, nut, bolts, screws, electronic circuit, chip etc complete all as specified and directed by Engr- in- charge. Note : (i) The contractor will have to employ minimum 01 Nos of Fire technician & 02 No Helper every day incl Sunday and holiday to attend day to day complaints as well as periodical / routine maintenance and joint inspection / testing of fire alarm system(s) installed at various locations / areas and submit the feedback on daily basis to the Engineer-in-Charge/ concerned JE E/M. (ii) The tradesmen/Technician (s) should be having minimum 3 years work experience of respective trade. (iii) In case, additional manpower other than mentioned here-in-above, will be required for smooth functioning of fire alarm system or attending day to day complaints or periodical / routine maintenance or joint inspection / testing of fire alarm system(s) installed at various locations / areas, the contractor shall arrange the same without any extra cost to Deptt. (iv) The comprehensive / preventive / periodical maintenance includes monthly joint inspection / testing of entire fire alarm system(s), in presence of rep of user. The joint inspection / test report duly signed by contractor and MES representative will be submitted along with RAR/payment. If contractor fails to complete the joint inspection / testing of fire alarm system(s), the compensation / penalty of Rs. 1000.00 (Rupees One Thousand only) per day shall be recovered from the contractor’s dues. (v) The complete fire alarm system(s) will be handed over to contractor in existing condition and no claim on this effect will be accepted at any stage. Hence, the bidder is advised to visit the site to assess the quantum of work to be carried out in this contract and quote their rates accordingly. (vi) The cost of all kind of repair /servicing/ replacement of defective equipment/devices and other minor parts/spares or cell/ batteries as and when required for making the entire fire alarm system(s) fully functional, is deemed to be included in quoted rates and no extra cost shall be paid to the contractor on this effect. However, the Cost of major equipment / devices shall be measured & paid separately under relevant item of this Schedule. (vii) All the complaint / fault (s) will be addressed within 02 hrs from the time of receipt of complaint. If, contractor or his tradesmen fails to attend the complaint within 02 hrs from the time of receipt of complaint verbaly or telephonically, the compensation/penalty of Rs. 500.00 (Rupees Five Hundred only) per complaint per hr for first 04 hr and after that Rs. 1000 (Rupees one thousand only) per complaint each day (i.e 24 hrs ) shall be recovered from the contractor’s dues. (ix) The contractor shall provide all the necessary T&P, uniform and stationery such as Attendance Register, Periodical Maintenance Register, log book etc to the technician without any extra cost to Dept.

M&L in replacement of Detectors Complying with and type certified to EN - 45 conventional type smoke detector Photoelectric/Optical with base with self built intelligence as per IS: 11360 as per existing make and model complete all as specified and directed by Engr- in- charge.

All as per item ser No. 2 here-in-above but addressable type smoke detector all as per existing make and model complete all as specified and directed by Engr- in- charge.

All as per item ser No. 2 here-in-above but Addressable type multisensor detector with heat and smoke combination as per existing make and model complete all as specified and directed by Engr- in- charge.

M&L in replacement of Addressable control module as per existing make and model complete all as specified and directed by Engr- in- charge.

M&L in replacement of Addressable Monitor module as per existing make and model complete all as specified and directed by Engr- in- charge.

M&L in replacement of conventional manual call point resettable type as per existing make and model complete all as specified and directed by Engr- in- charge.

M&L in replacement of addressable manual call point resettable type as per existing make and model complete all as specified and directed by Engr- in- charge.

M&L in replacement of conventional type hooter as per existing make and model complete all as specified and directed by Engr- in- charge.

M&L in replacement of remote response indicator as per existing make and model complete all as specified and directed by Engr- in- charge.

M&L in replacement of short circuit isolator/fault isolator module as per existing make and model complete all as specified and directed by Engr- in- charge.

M&L in replacement of loop powered sounder as per existing make and model complete all as specified and directed by Engr- in- charge.

M&L in replacement, testing and commissioning of 99 zones digital main wireless fire alarm panel with large LED display all radio emitter through radio waves, alarm 110 db, displays diffrent zones of smoke sensors transmitted by radio emitter, 24 volts DC (Rechargable batteries) including 3 pin socket point 5 amps for connected for charging with 12 Hours battery back up with Addressing method of digitals nos, display on screen with indoor use, made in MS body, fixed on wall with metal stand with base or as per existing make and model complete all as specified and directed by Engr- in- charge.

M&L in replacement of intelligent analog emitter with microprocessor based controller based on radio waves with supported manual call point and hooter with 110DB output in MS body, works on 220 volts used for repeating signals to main control panel or as per existing make and model complete all as specified and directed by Engr- in- charge.

M&L in replacement of intelligent analog wireless smoke detector based on radio waves with senitivity as per NFPA 72, specification EN54 Pt7, monitoring continuosly self checking, detection principle photo electric light scatter, including operating voltage of 9 volts DC (Alkaline batteries), unique address embedded in detector, moulded ABS body in white colour or as per existing make and model complete all as specified and directed by Engr- in- charge.

Supply & fix, testing and commissioning of micro processor based 2 zonal conventional type fire alarm panel having zone wise fire fault LED indication, zone isolation facility, inbuilt buzzer, 16x2 LCD line display, inbuilt battery charger and battery space operates on 230V AC, 50 Hz complete all as specified and directed.

Supply & fix, testing and commissioning of micro controller based 2 loop Addressable type fire alarm panel made with CRCA sheet with control switch for Reset, silence, Lamp-test and Evacuate, also with visual LED indication of control unit and loop line, 30 devices can be connected to each loop, user friendly programming etc complete all as specified and directed.

Supply & fixing in replacement of two core FRLS PVC insulated, unsheathed, multi stranded, copper conductor cable of size 1.5 sqmm complete all as specified and directed by Engr- in- charge.

Supply & fixing in replacement of rigid non metallic PVC conduit of 25 mm dia inclusive all types fitting accessories likes, bends, tees, elbows, reducers, lock nuts, saddles, pipes hooks etc complete all as specified and directed by Engr- in- charge.

M & L for testing of empty fire extinguisher cylinder as per standard fire norms, filling of cylinders with approved powder meant to extinguish electric fire with powder having strength 70% for the following cylinder capacity:- (Note: The rate Quoted by the contractor also include the transportation and necessary repair of the fire extinguisher and nothing extra shall be paid for the same.) (i) Fire extinguisher CO2 type 22.5 Kg capacity

All as per ser item No. 20 but fire extinguisher dry powder type 10.0 Kg capacity

All as per ser item No. 20 but fire extinguisher dry powder type 5.0 Kg capacity

All as per ser item No. 20 but fire extinguisher dry powder type 2.0 Kg capacity

Satish Kumar Gupta

Flint India

SKYLIGHT INNOVATIONS

Continental Engineers and contractors