WELCOME MAINT TO OMQS, SMQS AND SLA AND REPAIR/ MAINT/ MISC REPAIRS TO FOOTPATH, HARD STANDING, DRAINS, CULVERTS, COMPOUND WALL/ SECURITY WALL, FENCING AND ALLIED WORKS AT AF STN DINJAN UNDER GE (AF) MOHANBARI

Amount

M&L for preparation of old plastered or unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash on old decorated surfaces of walls including washing floors, cleaning glass, joinery, electrical fittings, wiring etc of drops and splashes complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash on old decorated surfaces of ceiling including washing floors, cleaning glass, joinery, electrical fittings, wiring etc of drops and splashes complete all as specified and directed.

M&L for preparation of old decorated distempered surfaces of walls by washing, rubbing down and stopping of distempered and painted surfaces and distempering walls by applying one coat of acrylic based distemper emulsion of any tint/shade complete all as specified and directed.

M&L for preparation of old surfaces of walls by complete removal of existing treatment and applying wall care white putty thickness not less than 2mm and sand papering surfaces to achieve smooth surfaces and applying two coats of acrylic based distemper emulsion over a coat of primer, white or tinted including washing floors, cleaning glass, joinery,electrical fittings, wiring etc of drops and splashes complete all as specified and directed.

M&L for Preparation of old decorated surface distempered surfaces of ceilings by washing, rubbing down and stopping of distempered and painted surfaces and distempering ceilings by applying one coat of acrylic based distemper emulsion of any tint/shade complete all as specified and directed.

M&L for preparation of old painted wooden /wood based materials surfaces of any description, not otherwise described, over 10 cm width or girth and painting one coat with synthetic enamel paint (1st quality) including cleaning, stopping and rubbing down and removing all dropings etc complete all as specified and directed.

M&L for preparation of old painted wooden /wood based materials surfaces of any description, not otherwise described, not exceeding 10 cm width or girth and painting one coat with synthetic enamel paint (1st quality) including cleaning, stopping and rubbing down and removing all dropings etc complete all as specified and directed.

M&L for preparation of old painted steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and painting one coat with synthetic enamel paint including cleaning, stopping and rubbing down and removing all drops etc complete all as specified and directed.

M&L for preparation old painted steel and iron surfaces of any description, not otherwise described, not exceeding 10 cm width or girth and painting one coat with synthetic enamel paint including cleaning, stopping and rubbing down and removing all drops etc complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thick above or below ground level, including removing of demolished material from work site at any distance outside MD land complete all as specified and directed.

M&L for PCC 1:2:4 type B-1, (using 20 mm graded stone aggregate) 40 mm thick and finished the cement concrete surface even and smooth without using extra cement all as specified.

M&L for Plain cement concrete type C2 (1:3:6), using 40 mm graded crushed stone aggregate,75 mm thick, as as in path / plinth protection/paving finished even and smooth with out using extra cement complete all as specified and directed.

Supplying Glass dividing strips, 3 mm thick 38 mm wide and inserting in position to conform to designand complete all as specified and directed.

Demolition Brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles including removing of demolished materialfrom work site complete all as specified and directed.

M&L for Brickwork with old size sub class locally available bricks, having compressive strength 75Kg sqcm, straight or curved on plan excd 6 M mean radius in built in cement and sand mortar 1:6 complete all as specified and directed.

M&L for Brickwork with old size sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement and sand mortar 1:4complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water, any description etc.including removing of rubbished material from work site complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6 brick work or concrete surface of wall and finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new surfaces of walls and applying wall care white putty thickness not less than 2mm and sand papering surfaces to achieve smooth surfaces and applying two coats of acrylic based distemper emulsion over a coat of cement based primer, white or tinted including washing floors, cleaning glass, joinery,electrical fittings, wiring etc of drops and splashes complete all as specified and directed.

M&L for preparation of new plastered or unplastered surafces of walls and applying three coats of white wash including washing floors, cleaning glass, joinery, electrical fittings, wiring etc of drops and splashes complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces, in cement and sand mortar 1:4 top surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coat of cement base paint over a coat of cement based primer of any tint/shade including washing floors, etc of drops and splashes complete all as specified and directed.

M&L for rendering 5mm thick on concrete surfaces in ceiling, in cement and sand mortar 1:3 complete all as specified and directed.

M&L for preparation of new plastered or unplastered surafces of ceilings and applying three coats of white wash including washing floors, cleaning glass, joinery, electrical fittings, wiring etc of drops and splashes complete all as specified and directed.

S&F in repair for 50mm dia polishced harewood knobs of cupboard fixed with screws complete all as specified and directed.

M&L for 2nd Class Hardwood not exceeding 3 sq cm in Plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and directed.

S&F in repair for aluminium body (extruded section) body Door closer hydraulically regulated, designation No. 3, universal type , suitable for door shutters 851 to 1000 mm in width and of weight between 61 to 80kg complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads upto 1.5 Sqm complete all as specified and directed.

S&F for 3 mm thick (nominal) Sheet glass, ordinary quality, in squares, not exceeding 0.50 sqm each each pane fixed with oil putty complete all as specified and directed.

S&F for 3 mm thick figured glass, pin head type and ordinary quality, in squares, not exceeding 0.50 Sqm each each pane fixed with oil putty complete all as specified and directed.

S&F in repair for harrison rails, anodised aluminium alloy chromium plated with fixing brackets, stops,rollers etc complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), in floors, aprons etc .laid dry or laid dry and pointed including removing of demolished material from work site at any distance outside MD land complete all as specified and directed.

M&L for Non Skid ceramic coloured tiles (1st quality) 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match. over 15 mm thick screeding in cement mortar 1:4 complete all as specified and directed. Note: screed bed shall also deemed to be included in the quoted rate by the contractor).

M&L for glazed ceramic coloured tiles, 350 mm x 250 mm x 7mm/ 450 x 350 x 7mm thick, in dado skirting and vertical surfaces set and jointed in neat cement slurry and pointed in white cement to match including rendering 10 mm thick in cement morter 1:4 for laying tiles complete all as specified and directed. Note: screed bed shall also deemed to be included in the quoted rate by the contractor.

M&L for vitrified ceramic (square/rectangular) light shade coloured polished tiles, (1st quality) area of each tiles not exc 0.36 sqm and 7-8mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white cement and pigment to match over 15 mm thick screeding in cement mortar 1:4 complete all as specified and directed. Note: screed bed shall also deemed to be included in the quoted rate by the contractor.

M&L for Non Skid ceramic coloured tiles (1st quality) 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. over 20 mm thick screeding in cement mortar 1:6 complete all as specified and directed.

M&L for Cleaning of over head tank and taking out of scale and dirts from inside the tank and washing with bleaching powder and again washing with clean water tank capacity upto 500 litre complete all as specified and directed.

M&L for Cleaning of over head tank and taking out of scale and dirts from inside the tank and washing with bleaching powder and again washing with clean water tank capacity exc 500 litres not exceeding 1000 litre complete all as specified and directed.

Dismantling PVC water tanks exceeding 250 litres but not exceeding 500 litres capacity, including removing ball valve and removing unserviceable tank from work site complete all as specified and directed.

Dismantling PVC water tanks exceeding 500 litres but not exceeding 1000 litres capacity, including removing ball valve and removing unserviceable tank from work site complete all as specified and directed.

S&F for rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 500 litres capacity including 15 mm bore ball valve, hoisted and fixed in position (ISI Marked embossed) complete all as specified and directed.

S&F for rotational moulded poly-ethylene multilayer water storage tanks ( cylinderical vertical with closed top ) 1000 litres capacity including 20 mm bore ball valve ,hoisted and fixed in position complete all as specified and directed.

S&F in repair for ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms complete, screwed for 20mm bore dia pipe or brass ferrule complete all as specified and directed.

S&F in repair for 9-10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including flush pipe and bracketes ISI marked embossed complete all as specified and directed.

S&F in repair for vitreous china wash basin (WHB), white, flat back, size 550 mm x 400 mm (1st quality) including brackets, waste fittings, brass Chromium plated for glazed basins etc with long screw shanks and fly nuts, flange end embedded in red lead cement, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply pipe and supply of taps complete all as specified and directed.

S&F in repair for sheet glass assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long which necessary or directed complete all as specified and directed.

S&F in repair for PTMT connections 15 mm size with PVC nuts of length 600 mmcomplete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc Laid, bedded and pointed in any mortar complete including removing demolished material from work site complete all as specified and directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking plateforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 20mm thick screeding in cement mortar 1:4 complete all as specified and directed. Note: screed bed shall also deemed to be included in the quoted rate by the contractor.

S&F in repair for stainless steel sink with draining board , made out of 1mm thick sheet for kitchen or laboratory with plug, washers, waste pipe, cast iron cantilever brackets, connecting union overall size 915 mm x 460 mm with bowl size 410 mm x 355 mm x 165 mm complete all as specified and directed.

S&F in repair for stainless steel sink without draining board , made out of 1mm thick sheet for kitchen or laboratory with plug, washers, waste pipe, cast iron cantilever brackets, connecting union overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm mm complete all as specified and directed.

S&F in repair for Cast Brass chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union in repairs complete all as specified and directed.

Demolition of Cement concrete (reinforced) of any description and in any position not otherwise specifically provided for including reinforced cut to facilitate demolition complete including removing demolished material from work site complete all as specified and directed.

M&L for precast reinforced cement concrete 1:2:4 type B-1 as in landings, cover slabs (for manholes etc) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set un cement mortar 1:6 complete all as specified and directed.

M&L for Mild steel deformed or twisted bars (TMT) 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia or higher complete all as specified and directed.

S&F in repair for central hole basin mixer swan neck, cast copper alloy with capstan head, chromium plated screwed down, high pressure with or without lettered "hot" or "cold" with long screwed shank and fly nuts screwed for iron pipe of 15mm bore complete all as specified and directed.

S&F in repair for Single Lever Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with115 mm Long Bend Pipe, Connecting Legs & Wall Flange (without Hand & Overhead Shower) complete all as specified and directed.

S&F in repair for waste pipe 32 mm bore Low density Polyethylene pipes (LDPE) of pressure rating 6 Kgf/cm2 fixed to wash basin / sinks as waste pipe complete all as specified and directed.

S&F in repair for health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and directed.

S&F in repair forglass corner shelf fancy type complete all as specified and directed.

S&F in repair for aluminium anodized Tubular towel rail, 20 mm dia. D type, 60 cm long between flanges with brackets complete all as specified and directed.

S&F in repair for angle valve(stop valve) 15 mm dia CP with long screwed shank and cup, cast copper alloy, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair for CP fancy type Bib taps, cromium plated with crutch handle, screwed for 15 mm bore dia. iron pipe or for brass ferrule and fixed complete all as specified.

S&F in repair for 15mm dia pilllar tap fancy type cast copper alloy chromium plated ,screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts screwed for iron pipe (bore of pipe 15mm) complete all as specified and directed.

S&F in repair for vitreous China white wash down water closet (padestal pattern), plastic water closet seat, black, closed pattern with recessed bottom and cover and mild steel CP hinging device, polyethylene flush pipe of low or high density 32 mm dia for cistern complete all as specified and directed.

S&F in repair for Plastic water closet seat with cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair for vitreous China white Squatting pan, 'Orissa' pattern size 580 mm x 440 mm with integral footrests water closet) with 'P' or 'S' trap front or back inlet complete including lime concrete for bedding, connection to drain pipe and to flushing pipe, anti syphonage pipe etc complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each and refixing the same after rescuring / easing complete all as specified and directed.

S&F in repair for aluminium, anodised, barrel tower bolts of extruded section and fixed, 150 mm length of bolt complete all as specified and directed.

S&F in repair for aluminium handle cast type anodised 125 mm size etc complete all as specified and directed.

Taking up or down steel tubing & connection 15mm bore complete all as specified and directed.

All as per item No 72 above but 20 mm bore complete all as specified and directed.

S&F for 20mm dia 3-layer PP-R (Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass thereaded polypropylene random fitting fixed complete to walls, ceiling or in floors complete all as specified and directed.

S&F for 25mm dia 3-layer PP-R (Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass thereaded polypropylene random fitting fixed complete to walls, ceiling or in floors complete all as specified and directed.

M&L for Cutting chases for concealed water tubing and making good to disturbed surfaces in cement mortar 1:3, cutting n.exc 10cm in girth complete all as specified and directed.

Taking down Chowkhats or frames n.exc 1.5 Sqm each with shutters (without taking off shutters from the frames) and making good disturbed surfaces including removing disposable materials from worksite outside MD land at any distance complete all as specified and directed.

Taking down chowkhats or frames exc 1.5Sqm and n.exc 4Sqm each with shutters (without taking off shutters from the frames) and making good disturbed surfaces including removing disposable materials from worksite outside MD land at any distance complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each making good disturbed surfaces including removing disposable materials from worksite outside MD land at any distance complete all as specified and directed.

Taking down shutters of any description n.exc 1 Sqm each making good disturbed surfaces including removing disposable materials from worksite outside MD land at any distance complete all as specified and directed.

Taking down chowkats or frame n.exc 1.5Sqm each and making good disturbed surfaces including removing disposable materials from worksite outside MD land at any distancecomplete all as specified and directed.

Taking down chowkats or frame exc 1.5 Sqm but n.exc 4 Sqm each.and making good disturbed surfaces including removing disposable materials from worksite outside MD land at any distance complete all as specified and directed.

Taking down shutters, repairs and refixing in same opening of any description n.exc 1 Sqm complete all as specified and directed.

Taking down shutters, repairs and refixing of any description in same opening exc 1 Sqm and n.exc 2 Sqm each complete all as specified and directed.

Dismantling timber scantlings 40 Sqcm and over in section,unframed work in any position including removing of unserviceable material from work site complete all as specified and directed.

M&L for 2nd class hard wood (well seasoned) scantling clean sawn as in unframed work etc complete all as specified and directed.

S& for 35 mm thick plain framed , panelled shutter ( two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 ( Part I) complete all as specified and directed.

M&L for 35 mm thick, IInd class HW(sal), factory made, Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR part-I, Section-8, clause 8.24 (a) supplied and fitted to chowkhats complete all as specified and directed.

M&L for 35 mm thick, IInd class HW(sal), factory made, Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into square with plain, chamfered or rounded, mitred and rebated sash bars, any numbers with edge of sash bars, forming moulded for window etc provided with stile and rails as specified in SSR part-I, Section-8, clause 8.24 (b) supplied and fitted to chowkhats complete all as specified and directed.

M&L for 2nd Class Hard wood ( Sal) Plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, supplied and fixed including tarring back of chowkhats with tar or coal tar black paint complete all as specified and directed.

S&F for Flush shutters, 30 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M&L for 125 mm x 60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strikes plate etc complete all as specified and directed.

M&L for 105 mm x 60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strikes plate etc complete all as specified and directed.

S&F for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified.

S&F for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

S&F for Steel ventilator with top hung shutter including hinges steel peg stay, steel handle complete including taking down existing old steel ventilator complete all as specified and directed.

M&L for mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/ or riveted, or forged in to spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings,frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F for stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

S&F in repair for stainless steel wire cloth, 0.36 mm nominal dia. of wire and average width of aperture 1.4 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F for 4 mm thick sheet glass, ordinary quality, in squares not exceeding 0.5 Sqm in each pane, glazed with putty or fixed with beads complete all as specified and directed.

S&F in repair for 3 mm thick sheet glass, ordinary quality, in squares not exceeding 0.5 Sqm in each pane, glazed with putty or fixed with beads including hacking out old broken glass complete all as specified and directed.

S&F for solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with Mild steel square tube, supplying and fixing in opening as per specifications and drawings complete all as specified and directed.

S&F for factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F for butt Hinges, medium weight, cold rolled mild steel, 100 mm size complete all as specified and directed.

S&F for Aluminium handles, cast type anodised, 150 mm long complete all as specified and directed.

S&F for Aluminium handles, cast type anodised, 125 mm long complete all as specified and directed.

S&F for Aluminium, anodised, barrel tower bolts of extruded section and fixed, 150 mm length of bolt complete all as specified and directed.

S&F for Aluminium, anodised, barrel tower bolts of extruded section and fixed, 100 mm length of bolt complete all as specified and directed.

S&F for Aluminium handles, cast type anodised, 100 mm long complete all as specified and directed.

S&F for butt Hinges, medium weight, cold rolled mild steel, 75 mm size complete all as specified and directed.

S&F for aluminium anodised sliding door bolt 250mm long with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

M&L for preparation of untreated new wooden surface of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint, with a coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F for solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications including PVC cover fillet of matching colour, grid size n.exc 800mm complete all as specified and directed.

M&L for preparation of untreated old wooden surface of any description Exc 10cm in width or girth one coat of varnish complete all as specified and directed.

S&F in repair for mild steel 150mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repair for extruded aluminium alloy handles, fabricated type, anodised, 150 mm long complete all as specified and directed.

M&L for Anodized aluminum frame for doors, windows, ventilators with one or more rebate including joining cleat for fixing etc complete all as specified and directed.

M&L for Anodized door shutters, aluminum section weighting 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handle four No’s in each door, hinges anodized aluminum snap beading screws etc complete all as specified with powder coating thickness not less than 50 micron complete all as specified and directed.

M&L for Anodised aluminium window and ventilator shutters, sliding or fixed type without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified with powder coating not less that 50 micron complete all as specified and directed.

S&F for 5.5 mm thick sheet glass, ordinary quality, in squares not exceeding 0.5 Sqm in fixed in aluminium shutters, glazed with putty or fixed with beads complete all as specified and directed.

S&F for 5.5 mm thick sheet glass, ordinary quality, in squares exceeding 0.5 Sqm in fixed in aluminium shutters, glazed with putty or fixed with beads complete all as specified and directed.

S&F for 4 mm thick figured glass,pin head type, in squares not exceeding 0.5 Sqm in fixed in aluminium shutters, glazed with oil putty complete all as specified and directed.

S&F for anodised aluminium grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and directed. (Only weight of grill to be measured for payment)

S&F in repair for Mortice lock, 2 lever, vertical type, size 100mm complete all as specified and directed.

S&F in repair for Prelaminated particle board 18/19 mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, as in kitchen cabinet shutter complete all as specified and directed.

Taking out existing aluminium frame with shutter and repair of all necessary items i.e. hinge aluminium snap beading, rubber packing, glazing clip, door closer,door closer screw etc, any type of repair and refixing the same and making good distrubed portion of wall/floor incl complete all as specified and directed. Note.- cost of hinge aluminiium snap beading, rubber packing, glazing clip, door closer,door closer screw ,etc are inclusive in quoted rate.

M&L in repair for steel windows by welding of hanging hinges, window stays, handles etc making good to the steel welded surface by providing synthetic enamel paint in two coats over primer to match existing color complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in hold fast block, filling in pressed steel chowkats including necessary form work etc complete all as specified and directed.

S&F for bands, straps,hold fast etc conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F in repair for aluminium body (extruded section) body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters 851 to 1000 mm in width and of weight between 61 to 80 Kg complete all as specified and directed.

M&L in repair for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, fixed in repairs, with & including replacement of floor tiles if any broken during repair work and making good disturbed surfaces matching to the existing surfaces complete all as specified and directed.

S&F in repair for 140 mm floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified and directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (40mm graded stone aggregate) as in posts etc complete all as specified and directed.

Dismantling brick work (laid flat or on edge) in floors, channels kerbs aprons etc laid dry and pointed in cement mortar complete including removing of materials obtained from demolition from worksite to outside MD land at any distance complete all as specified and directed.

M&L for Brick work with well burnt bricks having crushing strength 75kg/sqcm laid flat in floor/tappered wall of drain, bedded & jointed in cm1:6 and pointed in pointed in cement mortar (1:6) using old size bricks complete all as specified and directed.

All as per item No 137 above but except Bricks complete all as specified and directed.

M&L for Brick work with well burnt bricks having crushing strength 75 kg/sqcm laid on edge in floors/tappered wall of drain, bedded & jointed in cement mortar 1:6 and pointed in cement mortar 1:6 using old size bricks complete all as specified and directed.

All as per item No 139 above but except Bricks complete all as specified and directed.

M&L for plain cement concrete type B-1 (1:2:4), using 20 mm graded crushed stone aggregate, as in surface chanel and drain complete all as specified and directed.

M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed.

Dismantling posts or struts (wood, steel or RCC) any section embedded in Concrete, brick work, masonry, etc including taking out embedded portion and making good disturbed ground complete all as specified and directed.

M&L for reinforced cement concrete type B-1, 1:2:4 (20 mm graded stone aggregate) in precast poles, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area exc 100 Sqcm and n.exc 250 Sqcm with or without chamfered angles and flat, splayed, rounded or mitred tops complete all as specified and directed.

Ditto, but in landings, cover slabs (for man holes etc) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed.

Dismantling of chain link wire mesh of any type including removing of rusted unserviceable wire mesh, flat iton, round bar MS, nuts & bolts from work site and keep serviceable wire mesh, flat iton, round bar MS, nuts & bolts for reused in safe custody complete all as specified and directed.

Supply only chain link fencing made out of 3.15 mm dia galvanised steel wire, (Hot dipped galvanised), 75 mm x 75 mm mesh, made up into mattresses or cages complete all as specified and directed.

Fixing only chain link fencing to post old and new including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed. Note: MS flat iron and nuts and bolt shall be measured and paid under respective items and old material shall be obtained from dismantling item here-in-before.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete including removing dismantled material from work site complete all as specified and directed.

S&F for rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete, drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening grade Fe-410-W (Gde-E-250) quality -B complete all as specified and directed.

S&F for Framed work such as grills,gratings, fencing posts etc. with ends of bars shouldered and/or riveted,or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railing, framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

Dismantling of mild steel Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings, including removing of rusted unserviceable wire from work site and keep serviceable wire for reused in safe custody complete all as specified and directed.

M&L for Mild steel Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including,securing or tying at crossings with and Provision of galvanised mild steel wire, staples or steel pins etc (each line wire to be measured) complete all as specified and directed.

S&F for 1.6mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles etc complete all as specified and directed.

M&L in replacement for Concertina coil 610 mm dia having 50 Nos of turns in each coil weighing approx 8.5 kg/coil fabricated from PTC, anti rust coating of specification as indicated below extendable upto a length of 6 meters enabling adjacent coils to be jointed by special galvanized steel clips in order to form a long stretch of continuous barrier complete. Specification of PTC : Punched tape coils of approx weight 8.5 kg/coil and length 6m (approx) PTC round in shape, made of GP sheet 5mm and high tensile HC wire 2.6 mm, with blades of size 19 mm+ 2mm, at a distance of 24 cm and it is coated with anti rusted paint for maximum corrosion both sides resistance and durability and also providing camouflage effect complete all as specified and directed.

Excavating in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out complete all as specified and directed.

M&L for cement concrete type D-2, 1:4:8 mix using 40 mm graded crushed stone aggregate) in foundation, filling & mass concrete complete all as specified and directed.

M&L for cement concrete type C-2, 1:3:6 mix using 40 mm graded crushed stone aggregate) in foundation, filling & mass concrete complete all as specified and directed.

M&L for Mild steel round bars 10 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for chain link mattresses, as in tie bar strengthing and fising with nuts & bolts complete all as specified and directed.

M&L for Mild screw bolts ( Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends , each screwed end to be fitted with washers and one hexagonal or square nut , exc 10 but n exc 15cm long and 11 to 15 mm dia. of shank complete all as specified and directed.

M&L for spot welding in repairs exceeding 2.5 cm but not exceeding 5 cm in length, thickness of metal to be welded exceeding 6 mm and not exceeding 9mm complete all as specified and directed.

M&L for preparation of new steel surfaces of any description not otherwise described n.exc10 cm width or girth and applying two coats of synthetic enamelled paint (1st quality) over one coat of red oxide Zinc chrome primer complete all as specified and directed.

M&L for preparation of new concrete surfaces of fencing post and applying two coats of cement base paint complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:3 on fair faces of brick or concrete ceiling surfaces finishing surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:3 on fair faces of brick or concrete surfaces finishing surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement based paint, white or tinted including washing floors, cleaning glass, joinery, electrical fittings, wiring etc of drops and splashes complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for including removing rubbish from worksite outside MD land at any distance complete all as specified and directed.

M&L for Reinforced Cement concrete M-25 (20 mm Design Mix in slabs supported on walls, beams and columns, in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for RCC M25 (20mm graded stone aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams, bases for columns etc basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for RCC M-25 (20mm graded stone aggregate) in columns, pillars, posts etc complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

M&L for Reinforced Cement concrete M25 (20 mm Design Mix in slabs supported on walls, beams and columns, in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for Mild steel deformed or twisted bars (TMT) 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or higher complete all as specified and directed.

M&L for High strength deformed TMT steel bars 8mm dia and over as in stirrups cut to length, bent to shape required including cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L for Non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exceeding 0.11 sqm but nexc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match etc over and including screed bed or bedding layer 15mm thick in cement morter 1:6 for laying tiles complete all as specified and directed. Note: screed bed shall also deemed to be included in the quoted rate by the contractor.

M&L for Non skid ceramic tiles (heavy duty endura) 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but nexc 0.18 sqm in floorsetc set and jointed in neat cement slurry and pointed in white or coloured cement to match etc over and including screed bed or bedding layer 20mm thick in cement morter 1:6 for laying tiles complete all as specified and directed. Note: screed bed shall also deemed to be included in the quoted rate by the contractor.

M&L for glazed ceramic coloured tiles of size 300 mm x 200 mm x 7 mm thick on vertical surfaces such as dados , skirting and risers to steps etc. set and jointed in neat cement slurry and pointed in coloured cement to match over 10 mm thick screeding in cement mortar 1:4 complete all as specified and directed. Note : screed bed shall also deemed to be included in the quoted rate by the contractor.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc laid dry or laid dry and pointed including removing of demolished material from work site at any distance outside MD land complete all as specified and directed.

M&L for cement concrete tiles 25cmx25cmx20mm thick,machine pressed,in floors, set, jointed and pointed in neat cement slurry with grey cement and pigments to match etc over and including screed bed or bedding layer 20 mm thick in cement morter 1:6 for laying tiles complete all as specified and directed. Note: screed bed shall also deemed to be included in the quoted rate by the contractor.

M&L for 60 mm thick,M-35 Grade PCC interlocking tiles rubber moulded and chemical coated of size and shape as approved set, jointed and pointed in neat cement slurry with grey cement and pigments, laid dry on sand not less than 50 mm thick(including), interstices filled in floors/ pathway complete all as specified and directed. Note: Sand cushion shall also deemed to be included in the quoted rate by the contractor.

M&L for machine cut kota stone slab flooring 20-25mm thick in floors and jointed in grey cement with admixture of pigment to match with shade of kota stone over 20mm thick screeding in cement mortar 1:6 including rubbing and polishing complete all as specified and directed. Note : Screed bed shall not be measured and paid separately.

M&L for machine cut kota stone slab flooring 20-25 mm thick on vertical surfaces such as skirting/ dado, over and including cement screed bed 10mm thick in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slabe incl rubbing and granite polishing complete all as specified and directed.

M&L for plain cement concrete type B-1 (1:2:4), using 20 mm graded crushed stone aggregate, 40 mm thick, as in path / flooring finished even and smooth without using extra cement complete all as specified and directed.

Supply only Liquid water proofing compound complete all as specified and directed.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces for camouflage painting complete all as specified and directed.

M/S CHANDAN ENTERPRISE (BID ID -3499002)

Construction House (BID ID -3499448)

HIND CONSTRUCTION (BID ID -3499553)

PATKAI ENTERPRISE (BID ID -3499346)

KP GHOSH AND CO (BID ID -3499262)

Saranga Saikia (BID ID -3497387)

FREEZCON (BID ID -3498864)