Completion of balance Work of OPD Block G.A.Ganai Memorial Sub District Hospital at Mandi.

Amount

Brick work with common burnt clay F.P S ( non modualar) bricks in super structure above plinth level lupto floor V level.of class designation 75 cement mortar 1:6 (1 cement :6 coarse sand) including carriages.

12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 coarse sand)

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Sal wood

Providing and fixing 35mm thick panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).First class kail wood

Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-in-charge (Frame work shall be paid for separately). 12mm thick commercial ply conforming to S : 1328 BWR type

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. First Class kail wood

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete: 2nd class teak wood 50 x 20 mm

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc.

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood).

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. Size of tile 800x800 mm sqm sqm sqm sqm 1299.10 1531.85 1792.80 2533.35

Providing and fixing white vitreous china pedestal type water closet (European type W.C.pan) with seat and lid.10litre low level white P.V.C.flushing cistern including flush pipe with manually controlled device (hand lever) conforming to IS:7231,with all fittings and fixtures, complete,including cutting and making good the walls and floors wherever required.

W.C.pan with ISI marked white solid plastic seat and lid. make CERA, CAT No. S1050101

Providing and fixing wash basin with C.I/M.S.brackets,15mm C.P.brass pillar taps,32mm C.P.brass waste of standard pattern,including paintaing of fittings and brackets,cutting and making good the walls wherever required:

Round wash basin under Counter type Make CERA CAT No. S2030112 size 570 x 750mm

Providing and fixing G.I. pipes complete with G.I. pipes complete with G.I. fitting excluding trenching and refiling etc (external work) Medium

20mm dia nominal bore

25mm dia nominal bore

32mm dia nominal bore

40mm dia nominal bore

Providing and fixing P.V.C.waste pipe for sink or wash basin including P.V.C. waste fittings complete:

Flexible pipe pipe 40mm dia

Providing and fixing 100mm sand cast iron grating for gully,floor or Nahani trap.ISI Marked

Providing and fixing mosquito proof waste coupling 40mmx100mm of approved municipal design. Make JAQUAR CAT No. ALD 709 ISI Mkd. (6 inch)

Providing and fixing 600x120x5mm glass shelf with edges round of suspported on anodised aluminium angle frame with C.P.brass brackets and guard rail complete fixed with 40mm long screws,rawl plug,etc.complete.Make HEXA

Providing and fixing Soil, waste and vent pipes of approved quality LIKE VECTUS or PRINCE, ISI marked, unbreakable (4 Kg. pressure).

110mm dia

75mm dia

150 mm dia

Providing and fixing PVC clamps of approved design to PVC pipes:

of 110mm dia Pipe

of 75mm dia Pipe

Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete:

110mm dia PVC Door Bend of Make vectus or prince

75mm dia PVC Door Bend of Make Vectus or prince

Providing and fixing plain bend of required degree:

110mm dia PVC Plain Bend of make Vectus or prince

75mm dia PVC Plain Bend of Make Vectus or prince

Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete.

110x110x110mm dia PVC Door Tee of Vectus or prince

75x75x75mm dia PVC Door Tee of Vectus or Prince

Providing and fixing single equal plain junction of required degree

110x110x110mm dia PVC Plain Tee of Vectus or Prince

75x75x75mm dia PVC Plain Tee of Vectus or Prince

Providing and fixing single unequal junction of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete:

110x110x75mm dia PVC Reducer Door Bend of Vectus or Prince

Providing and fixing single unequal plain junction of required degree

110x110x75mm dia PVC Reducer Plain Tee of Vectus or Prince

Providing and fixing following PVC Fittings of approved quality as vectus or prince:

PVC Y/TEE of 110 mm dia.

FLOOR TRAP 110 mm dia.

VENT COWL 110 mm dia.

END CAP 110 MM dia

REDUCER 110MM x 75 mm dia.

P TRAP 110 mm dia.

FLOOR TRAP 75 mm dia

PVC Plain Bend 45 degree 110 dia of make vectus or prince

PVC Collar 110mm Vectus or prince

PVC Collar 75mm Vectus or prince

Providing and fixing trap of self-cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors:

CP Greeting ISI Market

Cutting chases in brick masonry walls for following diameter PVC pipes and making good the same with cement concrete 1:3:6 (1cement: 3coarse sand: 6 graded stone aggregate 12.5mm nominal size) including necessary plaster and pointing in cement mortar 1:4 (1cement: 4coarse sand) :

110 mm dia

75mm dia

Providing and fixing PTMT towel ring trapezoidalshape 215mm long, 200mm wide, with a minimum distance of 37mm from wall face with concealed fittings arrangements of approved quality and color, weighing not less than 88gms JAQUAR CAT NO. AEC 1121

Earth work excavation, refilling laying & filling with 1:3:6 Mix (Cement/Sand/Agg, 20mm) all around the pipes Incl. material (excluding cost of pipe).

150mm dia Pipes

110mm dia Pipes

Making connection of PPR Prince PN 20 distribution branch with PPR main of following sizes by providing and fixing Tee, incl. cutting and Threading the pipe etc complete

25 to 40mm nominal bore

Providing & Fixing Tank Nipple

Providing and fixing CP brass long nose bib cock of approved quality conforming to IS standards and wrighing not less than 810 gms

15mm nominal bore JAQUAR Make CAT No. CQT23037

Providing and fixing CP Brass angle valve fo basin mixer and geyser points of approved make conforming to IS:8931

15mm nominal bore JAQUAR CAT No.CQT 23053

Providing and fixing CP Brass close hole basin mixer with pillar cock of approved make conforming to IS:8931

15mm nominal bore BASIN MIXER of JAGUAR CAT No.CQT 23167 NB

Pillar Cock of Jaquar CAT No. CQT 23011

Constructing masonry chamber 30x30x50 cm, inside with 75 glass designation brick work in cement mortar 1:5 (1cement: 5 fine sand) for stop cock,with C.I. surface box 100x100x75mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) necessary excavation, foundation concrete 1:5:10 (1cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1cement: 3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design.(with F.P.S bricks) CRUSHED

Constructing masonry chamber 60x60x60 cm, inside with 75 glass designation brick work in cement mortar 1:5 (1cement: 5 fine sand) for Sluice valve, with C.I. surface box 100mm top diameter, 160mm bottom diameter and 180mm deep (inside) with chained lid and R.C.C. top slab 1:2:4 mix (1cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) necessary excavation, foundation concrete 1:5:10 (1cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1cement: 3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design.(with F.P.S bricks) CRUSHED

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI:12701 marked indicating the BIS License No. with cover and suitable locking arrangement and make necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank {Sintex, Vectus or equivalent}

Making soak pit 2.5 diameter 3.0m deep with 45x45cm dry brick honey comb shelf with bricks and SW drains pipe 100mm dia. 1.8m long complete as per structural design.

with common burnt clay FPS bricks

Providing installation and testing of Geyser of approved quality and manufacture mounted on bolts, well anchored in wall and connected with hot and cold G.I. connection with superior angle valves as required.

40 Ltrs JAQUAR Model/ CAT No. Versa H 40 [Horizontal] {5 STAR RATING}

Providing & Fixing Water Pump 1.5 Hp of Crompton Greaves /Sharp

Providing and fixing P.V.C.waste pipe for sink or wash basin including P.V.C. waste fittings complete:

Semi rigid pipe 40mm dia

Flexible pipe pipe 40mm dia

Providing and fixing PTMT bottle trap for wash basin and sink: Bottle trap 31mm single piece moulded with height of 270mm, effective length of tall pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 260gms. JAQUAR CAT No. ALE 773AL190

Nazir Hussain

M/S WASIM AKRAM KHAN

MM Ghulam Qadir Sheikh & Sons

M/S Matloob Hussain Shah

M/s Aftab Ahmed Ganai

Fardos Iqbal

Mohd Mashooq