ADDN/ALTN and SPECIAL REPAIRS TO PATIENT WARDS AND OTM ACCN OF MH SECUNDERABAD

Amount

Demolition of cement concrete (un reinforced ) of any description and in any position not otherwise specifically provided including removal of existing roof treatment of any type and any description complete all as specified and directed.

M&L for 40mm thick plain cement concrete type B1(1:2:4) ( using 20 mm graded stone aggregate) as in padding (level course) on roof finishing cement concrete surface even and fair complete all as specified and directed.

M&L for rendering 10 mm thick in CM (1:3) using water proofing compound as per manufacturer instruction as in roof and chajjas finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed. Note : Water proofing compound will be measured and paid separately.

M&L for Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar (1:3) complete all as specified and directed.

M&L for (a) applying a coat of 85/25 bitument based primer over the plastered surfaces @ 0.30Ltr/Qqm (b) Providing and laying APP based polymeric membrane of 3mm thickness of weight not less than 3.50kg/sqm on primed surfaces by means of torch application with side overlap of 100 mm both longitudinally and transversely (c) Over APP membrane applying a coat of biumen primner of 85/22 grade @ 1.20Ltr/Sqm and over this solar reflective bitumnionous aluminium paint @ 0.20Ltr/Sqm complete all as specified and directed

M&L for Plain cement concrete type E-2 (1:5:10) (using 40 mm graded aggregate) for filling in sunken floors etc complete all as specified and directed.

M&L for Rendering 15 mm thick in CM (1:3) using water proofing compound as per manufacturer instruction as in sunken floor complete all as specified and directed. Note : Water proofing compound will be measured and paid separately.

M&L rendering 15mm thick in cm 1:3 on brick work or concrete surfaces, and applying priming coat of NITO proof WB primer or equivalent product of M/s MC-Bauchemie/STP/CIPY/SIKA/Pidilite/ Dr fixit / Asian Paints/ Thermax applied as per manufacturerers insutruction to bottom and full vertical sides of sunken floors and all juinction points of sided and wall where CI/GI pipes are passing through shall be sealsed with epoxy cement mortar complete all as specified and as directed

Dismantling timber scantlings in unframed work 40 sq. cm and over in section fixed in any position complete all as specified and as directed.

S&F Rolled sections of grade Fe 410W (Gde E-250)as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and as directed.

Dismantling AC corrugated or semi corrugated etc sheets in roof coverings complete all as specified and as directed.

M&L Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strengh of 550 mpa as on roof covering/ridges fixed with self tapping screws complete all as specified and directed.

Dismantling of wall and ceiling boards ( fiber pulp insullation etc ) or insullation boards / slabs, blankets any thickness including cover fillets complete all as specified and as directed.

S & F in anodised aluminium snap grid frame work for false ceiling including supporting wire all as specified of size of grid 605 x 605mm. complete all as specified and as directed.

S & F 4mm thick non-asbestos fibre cement building boards fixed or laid/inserted to aluminium / wooden frame work with screws including two coats of OBD over a coat of alkali resistant primer and preparation of new surfaces of ceiling. complete all as specified and as directed.

Demolition of cement concrete(unreinforced) of any description and in any position not otherwise specifically provided including floor finishes complete all as specified and directed.

M&L for PCC (1:3:6) type C2 ( using 40 mm graded aggregate) as in plinth protection of average 75mm thick including finishing cement concrete surface fair and even complete all as specified and directed .

M&L for 75 mm thick plain cement concrete 1:4:8 type D-2 (40 mm graded aggregate) as in subbase of floor complete all as specified.

M&L for 25 mm thick plain cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as below floor finish complete all as specified.

M&L for 10mm thick vitrified light shade doubly charged polished ceramic tiles,area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for 10mm thick vitrified light shade doubly charged polished ceramic tiles, area of each tile not exceeding 0.36 sqm, in skirtings/ dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick cement plaster backing coat in CM 1:4 complete all as specified and as directed.

M&L for Non - skid Ceramic jointfree tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for Non - skid Ceramic jointfree tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4 complete all as specified and as directed.

M&L for Machine cut kota stone slab flooring 18-20mm thick over cement 20mm screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for machine cut kota stone slab 18-20 mm thick in riser of steps, skirting,dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete incl 10mm thick rendering in CM (1:3) backing of wall tiles such as dado/skirting in vertical surface complete all as specified and directed.

M&L for pre polished Machine cut kota stone slab flooring 18-20mm thick for shelves complete all as specified and directed.

Material and labour for cement concrete tiles of size 25cm x 25cm x 22mm thick machine pressed , laid over 20 mm thick screed bed in CM 1:4 mixed with WPC , set jointed and pointed in CM 1:2 mixed with WPC complete all as specified and directed .

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

Taking out old unserviceable floor, hearth or wall tiling including cement mortar bedding (but not backing and rubbish off the premises complete all as specified and as directed

M&L for glazed ceramic coloured tiles 450x300x7mm thick on vertical surfaces such as dados set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick backing coat in CM 1:4 complete all as directed.

M&L for chequered cement concrete tile 300 mm x 300 mm x 25 mm thick set jointed and pointed in neat cement slurry in floor with grey cement and pigment and including 20 mm thick screed bed cement mortar 1:4 all as specified and directed.

M & L granite work of any type 18-20mm thick ( of any type) work table rubbed & polished in steps , jambs , pillar, widow cills, cooking platforms and laid over 15mm thick screed bed or bedding in layer of in CM 1:4 for laying floor finishes incl pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite, complete all as directed and as specified.

Demolition of brick work or stone/boulders masonry built in Cement Mortar or cement lime mortar complete all as specified and as directed.

M & L for brick work with old size bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.

M&L for brick work brick straight or curved on plan to any radius in half brick thick wall built in CM 1:4, complete all as directed and as specified.

Taking down plastering in cement mortar on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc. complete all as specified.

M&L for rendering 15mm thick on fair faces of brick works in CM 1:6 finished even and smooth without using extra cement complete all as specified.

Material and labour for rendering 5mm thick in cement mortar (1:4) with WPC over a layer of 10 mm thick in CM 1:6 on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick in CM 1:3 on ceiling,chajja,roof projection etc finished even and smooth without using extra cement.complete all as specified and as directed.

M&L for prepartion of new plastered surfaces on wall applying two coats of oil bound distemper over a coat of primer including 3mm thick in (two coats) wall care putty complete all as specified and directed.

M&L for complete removal or existing wall treatment of old surfaces and applying two coats of oil bound distemper over a coat of primer and 3mm thick wall care putty complete all as specified and directed.

M&L for complete removal of existing treatment including preparing surfaces of wall & Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)complete all as specified and directed.

M&L for new plastered surfaces & Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and directed.

M&L for Complete removal of existing treatment including preparation of surfaces incl filling all cracks with approved crack filler of ceiling and applying two coats of oil emulsion distemper over a coat of alkali resistant primer over 3mm thick wall care putty to finish surface even and smooth all as specified and directed.

Material and labour for preparation of newly plastered surfaces of ceiling and applying two coats of oil emulsion distemper over a coat of alkali resistant primer over 3mm thick wall care putty to finish surface even and smooth complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames ) exceeding 1.5 Sqm each but n.exc. 4 sqm each complete all as specified and directed .

Taking down chowkats or frames with shutters (without taking off shutter from the frames ) not exceeding 1.5 Sqm each incl steel window, ventilators etc complete all as specified.

Supply and fix Pressed steel door frame of size 105 X60 mm with one or more rebates including necessary fixing lugs , hinges , lock strike plate etc complete all as specified and as directed .

Supply and fix Pressed steel door frame of size 125 X60 mm with one or more rebates including necessary fixing lugs , hinges , lock strike plate etc complete all as specified and as directed .

M&L Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube, supplying and fixing in opening as per manufacturers instructions all as directed.

S&F Factory made solid panel laminated PVC door shutter 30mm thick (style) consisting of frame made out M.S tube for top & bottom rails. M.S Srame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail : Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled the stiles & rails with suitalble PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specifications & drawing.

Material and Labour for PCC 1:2:4 Type B0 ( using 12.5 mm graded stone aggregate ) as in filling in pressed steel door frame complete all as specified and as directed .

Material and labour for PCC (1:3:6) type C-1 using 20 mm graded stone aggregate as in block for fixing of hold fast , window cill and similar items including necessary formwork complete all as specified and as directed .

S & F powder coated ( min thickness of powder coating 50 microns) anodised aluminium frame,three track sliding for windows, fixed/top hung frame for ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S & F powder coated ( min thickness of powder coating 50 microns) anodised aluminium sliding window shutter and top hung ventilator shutters with sash bars aluminium sections weighing 0.55kg/m including necessary joining cleats, glazing clips rubber packing ,locking arrengement complete all as specified and directed.(note: Glass panes and wire mesh shall be measured and paid seperatly )

S&F Anodised aluminium door shutters,aluminium section weighing 0.55 kg/ m including necessary oining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

Dismantling boarding description fixed in any position with nails

S&F 18 mm thick plywood BWR type fixed with screws with timber framework complete all as specified and directed.

Material and labour for 1 mm thick colour / white laminated sheet fixed to wooden surface with glue complete all as specified and directed .

S&F continuous (piano) hinges 30 mm width of flap, brass, bright finish or electrogalvanised complete all as specified and directed.

S&F 40mm dia cupboard knobs fixed with nuts screws and washers of brass polished complete all as specified and directed.

S&F in repair 20mm dia Stainless steel Decorative type draphery curtain rods with brackets and a pair of decorative globe on sides for each opening length of approved quality complete all as specified and as directed .

Supply and fix Stainless steel Telescopic type ball bearing drawer channel of any size complete all as specified .

S&F for brass mortoice lock with 4 lever vertical type size 100mm

Supply and fix in repair bathroom mirror cabinet PVC of size 400 X 500 mm fancy type complete all as specified and as directed .Make : Cat No-554 of Prayag or equivalent .

S&F in repair CP Soap dish fixed with chromium plated brass screw complete all as specified and directed.

S&F in repairs curtain toilet paper holder mild steel chromium coloured, fixed with chromium plated brass screw complete all as specified.

Supply only integral liquid water proofing compound complete all as specified and directed.

S & F sheet glass ordinary quality 5.5mm thick and glazing with oil putty/glazing clips of any description exc 0.5 Sqm. complete all as specified and as directed.

M&L for Mild steel frame work such as grills, gates, railings, framed guard bars confirming to IS Fe 290 -0 Gde E-165 complete all as specified and directed .

S&F 40 mm thick flush shutter ,solid core construction ,with block board core and both face is covered with decorative face veneer with lipping/frame to match complete all as specified and as directed.

S&F for Factory made 35mm thick 2nd class hard wood, plain framed, paneled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete, all as specified and directed.

S&F glazed and skelton shutters divided into squares with plain, chamfered or rounded, mitred and rebated sash bars prepared to receive glass, gauge sizes of members of shutters as specified in SSR Pt-I, section 8 , clause 8.24 (A) 35mm thick second class hard wood complete all as specified and as directed.

S&F 100 mm long stainless steel butt hinges complete all as specified.

S&F 150mm size stainless steel handles, fabricated type complete all as specified.

S&F 150mm long stainless steel barrel tower bolt of extruded section complete all as specified.

S&F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.0 mm and fixed with stainless steel wire staples complete all as specified and directed .

M&L for stainless steel sliding door bolt with hasp staple (bolt type) length 300mm fixed complete all as specified

M&L for applying two coats of synthetic enamel paint over a coat of red oxide , zinc chrome primer including preparation of new steel surface of any description over 10 cm width and girth complete all as specified.

M&L for two coats of synthetic enamel paint over a coat of pink primer including preparation of wooden surfaces exceeding 10 CM girth or width complete all as specified and directed.

M&L for preparation of old painted steel surfaces and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L Preparation of old painted wooden surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F in repair vitreous china wash down water closet (pedestal pattern) with plastic seat and cover including PVC low level flushing cistern 10 ltrs capacity and 450mm long PVC connectin pipe complete as directed.

S&F in repair Vitreous china squatting pan, Orissa pattern of size 580 x 440mm, white complete with integral foot rests and PVC low level flushing cistern of 10 Ltr capacity and 450mm long PVC connectin pipe and PVC flush pipe and including provn of lime concrete bedding including CI 'P' trap 100mm complete all as specified and directed.

Supply & fixing in repair vitreous china wash basin oval type , white size 550x400mm embedded in grainite top and including PVC connection pipe 15 mm bore 450 mm long , waste coupling of PTMT , PVC waste pipe complete all as specified and directed.

S & F in repair 15mm bore Two way Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs concealed stop cock but fancy type 15mm dia, chromium plated with long shank and cup (concealed type).

S & F in repair 15mm bore dia. pillar taps (fancy type), cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete.

S & F in repair 125mm size brass chromium plated shower rose with or without swivel joints including fixing to steel pipe or union fixed complete all as specified and directed.

S & F in repair tubular towel rail 20 mm dia ‘D’ type 60 cm long between flanges of brass chromium plated.

S&F in repairs stainless steel grating of 125 mm dia chromium plate grating for nahani traps with or without hole for waste pipe complete all as directed

S&F GI pipe medium grade 15 mm dia with all fitting laid in floor or fixed in walls including taking down old GI tubes complete all as specified and directed.

S&F GI pipe medium grade 20 mm dia with all fitting laid in floor or fixed in walls including taking down old GI tubes complete all as specified and directed.

S&L in repairs CI floor trap with grating incl jointing to waste pipe with dia of outlet 75mm complete all as specified and directed.

Demolition and beaking up drain AC pipes/PVC pipes/CI Pipes set in cement mortar of any dia and size complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls bore of the pipe 110 mm complete all as specified and as directed.

S&F PVC (SWR) bends 110 mm complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls bore of the pipe 75 mm complete all as specified and as directed.

S&F PVC (SWR) bends 75 mm all as specified and as directed.

Supply and fix in repair 110 mm bore PVC (SWR) junction single ( single 'T') equal or unequal complete all as specified .

Supply and fix in repair 110 mm bore PVC (SWR) Vent Cowl complete all as specified and as directed .

S&F in repair angle valves cast copper alloy, screwed down high pressure fancy type chromium plated 15 mm dia with long shank and cup (concealed type) all as directed.

Dismantling water tanks of exc 500 but n.exc1000 ltr capacity and removing to store complete all as specified and directed.

S&F of rotational moulded poly thylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position of capacity 1000 Ltrs complete all as specified and directed.

S&F in repairs Gun metal globe or gate valves of 20 mm dia with iron wheel head screwed both ends for iron pipe complete all as specified and as directed.

S&F 20 mm Ball brass valves. high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F in repair 20mm dia CP Decorative type drapery curtain rods with bracket a pair of decorative globe on sides for each opening length of approved quality complete all as specified and as directed .

Supply and fix in repair CP health faucet with 01 Mtr tube and hook complete all as specified and as directed .

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed.

S&F 3mm thick sheet glass ordinary quality fixing with putty in square not exceeding 0.5 Sqm in each pane. complete all as specified and as directed.

M&L for pre-cast reinforcement cement concrete (1:2:4) Type B-1, using 20 mm graded stone aggregate as in cover slab for manholes etc.and set in cm 1:6

S & F mild steel TMT bars 6mm to 8 mm dia cut to length bent to shape required including cranking bending etc TMT bars.

S&F TMT bars 10 mm dia and over and cut to length bent to shape required including cranking, bending, hooking ends and bending with MS wire not less than 0.9mm dia or securing with clips quality conforming complete all as directed.

M&L for cleaning, removing the dirt, grinding and beeswax polishing over old terrazzo tile/ Kota stone flooring all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratary with plugs washer and wastes including bedding in cement mortar to drawf wall or including fixing cantiliver brackets and connecting union to pipes overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S&F in repairs sinks without drainage board made of stainless steel 1 mm thick kitchen or laboratary with plugs washer and wastes including bedding in cement mortar to drawf wall or including fixing cantiliver brackets and connecting union to pipes overall size 495mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

Supply and fix in repair CP Quarter Turn Sink Cock with regular swinging spout ( wall mounted model ) with wall flange complete all as specified . Make : Cat No-FLR-5347N of Jaquar or equivalent .

S&F for XPM jali expanded metal standard type weight per sqm is not less than 1.88 kg all spd and directed.

Material and labour for point wiring complete all as specified with 1100 Volts grade 1.5 Sqmm PVC insulated FR-LSH unsheathed cable with multistranded copper conductor conforming to IS:694:1990 with ISI marking in and including PVC rigid conduit medium grade of size minimum 20 mm with all accessories concealed in wall / ceiling including continous earth wire 1.5 Sqmm PVC insulated FR-LSH unsheathed 1100 Volts multistranded copper conductor connected to common earth and earth dolly including modular metal flush boxes concealed in walls and modular white plate covers with frame for mounting of modular switches/sockets/fan regulators etc complete all as specified for the following:- (a) One light / fan point controlled by one switch.

(b) One three pin switch socket 6 Amps outlet on independent board.

(c) One three pin switch socket 6 Amps outlet on same board.

(d) One light point controlled by two nos of two way switches.

(e) One bell point controlled by one bell push.

All as per item No 121 here in before but with cable 4 sqmm multi stranded copper FR-LSH wire , 1100 Volts grade, unsheathed for one 3 pin socket out let 15 amps on independent board including continuous earth wire PVC insulated 4 sqmm copper stranded conductor FR-LSH, 1100 Volts grade, connecting to common earth and earth dolly complete all as specified

Supply and fix Modular switch 1 way 6A , 1-module all as specified and directed.

Supply and fix Modular switch 1 way 16A with indicator, 1-module all as specified and directed.

Supply and fix Modular socket, shuttered type, 6A - 3 pin 2 -module all as specified and as directed

Supply and fix Modular socket, shuttered type, 6/16A - combined 2-module all as specified and as directed.

Supply and fix Modular switch 2 way 6A,1 module

Supply and fix Modular Bell push 6A 1 module

Supply and fix Bell, Ding Dong AC. 230 volts, single pole

Supply and fix AC Power module 240V, 20A complete with 4 module metal flush box, cover plate, Starter, Plug & Socket all as directed

S & F Ceiling rose having terminal capacity 3 X 1.5 mm² complete all as specified and directed.

S & F single pole & neutral, double door, metallic distribution board 12 ways, suitable for flush in wall mounting with provision for DP RCCB / RCBO / Isolator / MCB as incomer and SP MCBs as outgoing, reversible metal door, 200 A copper busbar, fully shrouded neutral bar, earth bar, wire set & cable ties for cable management, pre fitted masking sheet, etc. having IP 42 protection complete all as specified in IS 732: 2019 and directed.

All as per Item 136 but triple pole & neutral double door, 4 ways with MCCB as incomer

All as per Item 136 but triple pole & neutral double door, 6 ways with MCCB as incomer

S & F MCB ('C' curve) 6- 32 A, 230 V, 50 Hz, SP for conforming to IS/IEC 60898-1-2002, having breaking capacity Icn = 10 kA, sliding bottom clamp, colour coded on/off indication on dolly, bi-connect IP 20 protected lower terminals and sliding shutters, etc. with the following rating complete all as specified and directed.

S & F RCBOs for earth leakage, overload & short- circuit protection 6-32 A, 230 V, 50 Hz, 2P, 30 mA rating complete all as specified in IS 12640-1 (2008) and directed.

S & F MCCB, 415 V, 16KA, 4 Pole, 100 Amp with thermal megnatic release and shourt circuit / over load protection complete all as specified and directed.

M & L for submain wiring using 3 runs of 10 Sq mm 1100 V grade single core FR-LSH flexible cable conforming to IS 694: 2010, having multi-drawn thin strands of electrolytic copper conductors and insulation for phase, neutral and earth continuity conductor connecting to earth dolly, colour-coded as per IS 11353: 1985, drawn in medium grade PVC recessed conduits, conforming to IS 9537 (Part- 3): 1983, of size not less than 25 mm NB, including making good of disturbed surfaces of wall / ceiling / floor all complete as specified in IS 732: 2019 and directed.

All as per Item No. 142 but 6 Sq mm wiring cable.

All as per Item No. 142 but 4 Sq mm wiring cable.

All as per Item No. 142 but 1.5 Sq mm wiring cable.

M & L for submain wiring concealed using 5 runs of 10 Sq mm 1100 V grade single core FR-LSH flexible cable conforming to IS 694: 2010, having multi-drawn thin strands of electrolytic copper conductors and insulation for phase, neutral and earth continuity conductor connecting to earth dolly, colour-coded as per IS 11353: 1985, drawn in medium grade PVC recessed conduits, conforming to IS 9537 (Part- 3): 1983, of size not less than 25 mm NB, including making good of disturbed surfaces of wall / ceiling / floor all complete as specified in IS 732: 2019 and directed.

Supply and fixing ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated which can work on electronic regulator with copper winding motor (BLDC Fan) brushless direct current motor, colour as directed. Note :- The rate quoted deemed to be inclusive of taking down of existing old unserviceable Ceiling fan, transport and deposited at MES Store yard. Make : Gold Medal cat part No. SCFS 500748/Bajaj Cat part No: ENERGOS 28/Crompton Cat Part No : ENERGION RIVIRA/Havells Cat part No. PRO 28BLDC

Supply and fix exhaust fan made of sturdy Engineering plastic body complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm sweep for Toilet of Md Accn complete including making suitable size hole in wall as specified and directed. Make : Havells cat part No. Ventil Air DX HS/Gold Medal EFS850310 AIR MAXX/Crompton VENTILUS250MM

Supply and fix exhaust fan, metal body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers complete all as specified and directed. Make : Havells cat part No. Ventil Air DSB / Gold Medal EFS851012 HAVAC PLUS / Crompton drift air plus300mm

M & L for fixing only in repairs LED batten 20W

S & F Modular type fan regulator stepped socket type, suitable to work on 230 volts all as specified.

S & F TV CO-Axial socket outlet fixed to wall on hylem sheet complete all as specified and directed.

S & F Rigid non-metallic PVC conduit of dia 20 mm exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers and fixing accessories such as couplers, lock nuts, saddles, pipe hooks, concealed in wall etc

S & F 20 W surface / wall mounted LED batten having PC diffuser, luminous efficacy of minimum 120 lumen/W, 50000 burning hours, CRI > 80, PF > 0.9, CCT 6500K, independent isolated with THD < 20%, surge voltage protection and other safety tests as per IS 15885 (Part-2/Sec-13): 2012, polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing. white coloured ABS end caps, IP 20 protection, input voltage range 140- 270 V, input frequency 50- 60 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. Make. Crompton CCS-100-20-65-HSL2-DP-NWH/PHILIPS BN308CLED20S-6500L120PSUWH / WIPRO LL20-221-XX-65/Havells ENDURALINEARPROBS20WLED865PCSSIND

All as per Item no.154 but 10 W, 110 lumen / w. Make. Crompton CCS-103-10-65-SL-DP-NWH/ Havells LHEXAZP7PN1W010 / PHILIPS BN021LED12S 6500K PSU GR / WIPRO LL20-111-XX-65

S & F LED light fitting 1X10W bulkhead luminaires metal body including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. Make : Crompton CIS-306-10-57-SL-DP-NBK / Philips WT 202W LED10S CW PSU S3 PC/ HAVELLS HEXAFT10WLED857SSYMBOPC/WIPRO LW07-141-XXX-57-G1

S & F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings suitable for B22 type LED bulb 15 W.

S & F LED Bulb 15 W B22, BEE star rated with minimum 5 star rating efficacy 10 lm/w & rated life 25000 burning hours.

S & F Decorative LED wall light fitting, made out of polycarbonate suitable for and including B-22 base LED Bulb 10 watt fixed on wall and making electric connection complete as per Havells Make : Havells – FLORETINE WL 1SL B22 SS or equivalent

Supply and fix LED Reading lamp 2 Module type capacity 5/7 watts suitable for single phase AC Supply, fixed on wall with the help of screws complete all as specified and directed. Make : Wipro-DH80740/DH52027 or equivalent

Supply and fixing LED luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of light fitting suitable for grid tyupe flase ceiling or POP false ceiling complete all as directed by E-in-Charge. Make: Crompton : LCTLRP-36-FI-CDL/ PHILIPS RC308LED36S6500/ HAVELLS VENUSEXL2X2PLR36WLED865SWH/ WIPRO

S & F Wall mounted Fan 450 mm sweep, PVC blades with wire grill, speed regulator oscillation type including hanging on wall with the help of suitable size screws complete all as specified.

Supply, lay, testing and commissioning of BHP (Bed Head Panel) 4 ft long made out of 1.6 laminated aluminium sheet die pressed in such a shape that looks good as per requirement.The modular medical turn king system/bed head panel: would be fabricated of aluminous die pressed 1.6 mm thick imported laminated sheet in such a way to provide 100% safe and efficient means to deliver all the gases as well as electrical to the patient/staff in intensive care conditions. To enclosed all piping, electrical wires, monitor wire ect it would be fitted continuously running on wall. The design of modular BHU would consist of aluminum section to meet the requirement of HTM 2002, NFPA and other international standard. It would have separate duct for medical gases as well as electrical. There would be no sharp edges having smooth finish and without any visible Reciprocatings etc.It would be have ability fix medical gas outlets, electrical multi-pin sockets outlets-04 Nos (2x 6 Amps & 2x16 Amps), nurse’s call bell, IV fluid’s saline etc.. Make :-(MEC or equivalent) Note :- The rate quoted is deemed to be inclusive of fixing of suitable copper gas pipe and necessary fixing arrangement / accessories required for satisfactory completion of the job.

S & F 35 W security light having high efficiency long life LED module efficacy 120 Lm/w & rated life 50000 buring hours with SMD LED package mounted on PCB with high LED efficacy of ≥ 110 lumen/Watt, integral SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, IP 66 protection, high effiency polycarbonate cover with integrated lens housed in pressure die-cast aluminium alloy heat sink for effective thermal management, sturdiness, excellent corrosion resistance, separate optical and control gear compartment & top opening for easy maintenance, suitable for side entry, wall mounting with bracket arm OD 35 mm to 42 mm including necessary electrical connection to the fixture with 3 core flexible Cu conductor cable of appropriate size and 1.5 m long bracket, having 40 mm diameter light grade GI pipe, including GI clamps, nuts, bolts & washers with two coats of synthetic enemal paint over a coat of red oxide primer complete in all respect as specified and directed. Crompton TRP-409-45-57-SL-GL-NSG / PHILIPS BRP030LED35CWSLRGRPSUV1/ HAVELLS ENDURASUNDOWNSL45WLED765PASYBOPC / WIPRO

Supply & Fix Electric water heater, storage type inner tank and heating element up to 2 KW capacity 25 Ltr, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. Make : Crompton VERSA 25L / HAVELLS FABIA GHWAFATWB025 / Gold Medal SWMS01025VWH / Bajaj SPECTRUM15096625L

Material and Labour for Earthing complete with galvanized steel earth plate electrode 60cmX60cmX6mm thick, buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of plate not less' than 1.5meters below normal ground level, earth plate connected to galvanized earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES SSR-2009 (part I Specifications) connected to earth test point all as specified or indicated including testing on completion, including necessary excavation and earth work in any type of soil and adequate quantity of common salt & charcoal for alternate layer around the earth plate, including PCC (1:2:4) pit and 10mm thick C.I. cover with arrangement of hinge to 40x40x6mm C.I. angle iron frame, including 20mm dia G.I. pipe for watering purpose with the arrangement of funel and wire mess, including GI pipe of 15 dia for earth lead protection complete all as specified and as directed.

M & L for taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Taking down existing unserviceable Distribution Boards with MCBs & MCCBs of any size and any type all as specified and directed.

Taking down existing Submain wiring of any size or any type complete all as specified and as directed.

M&L for earth continuity conductor 4 Sqmm dia GI or steel wire

Taking down existing Earthing with GI Wire / Strip complete all as specified and as directed.

SAI RUPA CONSTRUCTIONS (BID ID -3302815)

S.R.M.K Enterprises (BID ID -3303362)

SRICO PROJECTS PVT LTD (BID ID -3303008)

Shetty Construction Co (BID ID -3309251)

Sri Associates (BID ID -3303786)

Shree Construction Co. (BID ID -3301609)