Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹59.3 LAccepted-AOC | L1 | Accepted-AOC SATISFIED | |
| 2 | Rejected-Technical | - | Rejected-Technical Technically Not Qualified |
Tender Value
₹72 L
EMD Value
₹72,000
Closing Date
25 Sept 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
The Commissioner, Coimbatore Corporation
The Commissioner, Coimbatore Corporation
Formation of STEM Park at Ponthottam nagar, Saravanampatty in Ward No.10 North Zone, Coimbatore Corporation.
2023_MAWS_370495_2
E59/2023-24 CGF PHASE 2
Open Tender
Civil Works - Others
Works
210 days
Coimbatore corporation-
As per the tender condition attached
4 documents required · 4 mandatory
₹0
₹72,000
5 Oct 2023
15 Sept 2023
25 Sept 2023
15 Sept 2023
25 Sept 2023
15 Sept 2023
Amount
Earth work excavation and depositing on bank with initial lead of 10 meters and initial lift of 2 meters in hard stiff clay, stiff block cotton hard red earth, murrams, gravel stoney earth and earth mixed with small size boulders and hard gravel soil etc., complete as per standard specification.
Plain Cement concrete 1:4:8 [one cement, four M-sand and eight course aggregates] using 40mm size Hard Broken / Machine crushed Granite Stone Jelly including dewatering if found necessary and laid in layer so not more than 15cm thick and compacted etc., complete complying with standard specification.
Supplying and erecting centering for soffits of RCC slabs, plane surface like lintels, beams etc., including strutting 3m high using mild steel sheets of size 90cm x 60cm and BG 10 stiffened with M.S angles of size 25mm x 25mm x 3mm laid over silver Oak (C.W) joists of size 10cm x 6.5cm (spaced at about 90cm c/c) and supported by casurina props of 10cm to 13cm dia (spaced of 75cm c/c) etc., complete complying with standard specification.
Supply and erecting shuttering including necessary supports for plane surfaces such as RCC column, footing, plinth beam, stair case etc., in all floors using mild steel sheets of 90cm X 60cm and 10 gauge stiffened with welded mild steel angle for boarding supported by casurina props at suitable intervals etc., completed complying with standard specification
Supplying, fabricating and placing in position of Steel Reinforcement using Mild Steel or Ribbed Tor steel bars for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors etc., complete complying with standard specification.
Reinforced cement concrete 1:1½:3 [one cement, one and half M-sand and three course aggregates] using 20mm size Hard Broken / Machine crushed Granite Stone Jelly for all RCC items of works excluding centering, shuttering and cost of reinforcement, including curing, fixing fan clamp and fixtures if necessary etc., complete complying with standard specification.
Fly Ash Brick work In CM 1:5 mix (one cement and five M-sand) using best Fly Ash Bricks of size 230 x 110 x 70mm including finishing, curing etc., complete complying with standard specification.
Plastering with cement mortar 1:5 mix, 12mm thick in all floors using clean screened sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including the cost of preparing the surface for plastering and protecting from other damages till setting of mortar etc., complete complying with standard specification.
Supply, fabricating & fixing in position of M.S Doors / Windows / Ventilators / Gates / Grills of required of size suitable to site condition using necessary 'L' Angles, flats, I sections covered with 18 gauge M.S.Sheet with one coat red oxide primer including cost and conveyance of materials, all labour charges for fabrication, fixing with all furnitures fittings etc., complete as directed by departmental officer.
Supplying, Fabricating and Fixing of Main GATE and Wicket Gate required of size suitable to site condition using necessary 'L' Angles, flats, I sections covered with 18 gauge M.S.Sheet with one coat red oxide primer including cost and conveyance of materials, all labour charges for fabrication, fixing with all furnitures fittings with Nural Design etc., Complete
Painting two coats with approved first quality Cement Paint over one priming coat of cement paint over plastered New / Old Wall surface and ceiling including cost of one priming coat, Cost of all materials, all labour charges, brushes etc, complete as per standard specification
Painting two coats for New iron work surface using best quality synthetic enamel paint etc complete complying with standard specification.
Provision for Drawing government logo,Awarness drawings and Quotes,lettering with base coat of primer etc complete including cost Paints of an approved brands and labour charges .
Supply and fixing of granite culvetu nameboard with fixing in compound wall including all cost etc complete.
FOOT PATH Earth work excavation and depositing on bank with initial lead of 10 meters and initial lift of 2 meters in hard stiff clay, stiff block cotton hard red earth, murrains, gravel stoney earth and earth mixed with small size boulders and hard gravel soil etc., complete as per standard specification.
Plain Cement concrete 1:4:8 [one cement, four M-sand and eight course aggregates] using 40mm size Hard Broken/Machine crushed Granite Stone Jelly including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted etc., complete complying with standard specification.
Supplying and erecting centering to sides and soffits including supports and strutting for drainage sides and culvert body wall sides using 90cm x 60cm and B.G 10stifened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding laid over (silver oak joists ) of size 10cm x 6.50cm spread at about 90cm etc. complete complying with standard specification .
Plain Cement Concrete 1:2:4 (one cement, two fine aggregates and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification.
Supply stocking and filling of Quary dust including all conveyance and consolidation cost etc complete.
Providing and laying rubber moulded hydraulic pressed paver block of approved designs like décor, regular (or) castle including all cost etc complete.(63mm thick)
TOILET Earth work excavation and depositing on bank with initial lead of 10 meters and initial lift of 2 meters in hard stiff clay, stiff block cotton hard red earth, murrams, gravel stoney earth and earth mixed with small size boulders and hard gravel soil etc., complete as per standard specification.
Plain Cement concrete 1:4:8 [one cement, four M-sand and eight course aggregates] using 40mm size Hard Broken / Machine crushed Granite Stone Jelly including dewatering if found necessary and laid in layer so not more than 15cm thick and compacted etc., complete complying with standard specification.
Supply and erecting shuttering including necessary supports for plane surfaces such as RCC column, footing, plinth beam, stair case etc., in all floors using mild steel sheets of 90cm X 60cm and 10 gauge stiffened with welded mild steel angle for boarding supported by casurina props at suitable intervals etc., completed complying with standard specification
Supplying and erecting centering for soffits of RCC slabs, plane surface like lintels, beams etc., including strutting 3m high using mild steel sheets of size 90cm x 60cm and BG 10 stiffened with M.S angles of size 25mm x 25mm x 3mm laid over silver Oak (C.W) joists of size 10cm x 6.5cm (spaced at about 90cm c/c) and supported by casurina props of 10cm to 13cm dia (spaced of 75cm c/c) etc., complete complying with standard specification.
Supplying and erecting centering for sides soffits including supports and strutting upto 3.29m high for plain surface such as rectangular column top and bottom slabs of boxing, sill, slabs, sun shade etc., in all floors using mild steel slabs of sizes 90cm x 60cm and BG 10 stiffened with welded mild steel angles of size 25X25x3mm for boarding laid over country wood joists of size 10cm X 6.5cm spaced at about 90cm C/C and supported by casurina props of 10cm to 13cm dia spaced at 75cm C/C etc., complete as directed. Sl.No.123 C Part-II., complete complying with standard specification.
Supply and Filling with well gravel layer by layer including cost of watering,consolidation,ramming and cost and conveyance of all materials etc., complete as per specifications.
Supplying, fabricating and placing in position of Steel Reinforcement using Mild Steel or Ribbed Tor steel bars for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors etc., complete complying with standard specification.
Reinforced cement concrete 1:1½:3 [one cement, one and half M-sand and three course aggregates] using 20mm size Hard Broken / Machine crushed Granite Stone Jelly for all RCC items of works excluding centering, shuttering and cost of reinforcement, including curing, fixing fan clamp and fixtures if necessary etc., complete complying with standard specification.
Fly Ash Brick work In CM 1:5 mix (one cement and five M-sand) using best Fly Ash Bricks of size 230 x 110 x 70mm including finishing, curing etc., complete complying with standard specification.
Plastering with cement mortar 1:5 mix, 12mm thick in all floors using clean screened sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including the cost of preparing the surface for plastering and protecting from other damages till setting of mortar etc., complete complying with standard specification.
Plastering with cement mortar 1:3 mix (one cement and three sand) 12mm thick in all floors using clean screened sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including the cost of preparing the surface for plastering and protecting from other damages till setting of mortar etc., complete complying with standard specification.
Plastering in Cement Mortar 1:5 mix 20mm thick in all floors using clean screened sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including the cost of preparing the surface for plastering and protecting from other damages till setting of mortar etc., complete complying with standard specification.
Weathering course in concrete broken stone brick jelly 20mm size in pure slacked lime over RCC slab.The proporation being 32:12:5 for requuired slope and the thickness of as required and well beaten with wooden beaters etc., completed
Terrace flooring with one couse of pressed tiles of size 23 X 23 in cement mortar 1:3 mix with impermo oil 2% by weight of cement and pointed with same oiled mortar
Supply and fixing of Solid panel PVC door with frame with all furnitures fittings etc., complete as directed by departmental officer.
UPVC Ventilator Specification : Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter.The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Engineer before use on work
Supplying and fixing of Ornamental Type White Glazed Porcelain Corner 'L' Type Wash Hand Basin of size 350mm
Supplying and fixing European Water Closet (Colour) with 'P' or 'S' Trap with Double Flapped seat and seat cover with Brass Highes and 10 litre capacity PVC low level flusing tank with all internal fittings
Supplying and fixing in position of Indian make colour water closet of size in 580mm * 440mm weight glassed earthan ware of approved with P Trap (or) S Trap and foot rest and filling all round the closet using 20mm broken brick jally in 10cm thick and plaster in c.m. 1:3 12 mm thick including fixing in position levelling complete with necesary connection as per standard specification
Flooring finishing with first quality design ceramaic tiles of all colours of size 305cm X 305cm X 6mm laid in cement mortar 1:3 mix to 20mm thick and painting with white cement using 0.30 kg/1m2 including finishing the jointing and painting flush with tiles surface etc.,complete complying with standard specification.
Daddoing the walls with first quality approved colour glazed tiles with printed design of 150X150X6 mm laid in cement mortar 1:2 mix to 10mm thick and painting with white cement using 0.40 kg/1m2 including finishing the jointing and painting flush with tiles surface etc.,complete complying with standard specification.
Painting two coats with approved first quality Cement Paint over one priming coat of cement paint over plastered New / Old Wall surface and ceiling including cost of one priming coat, Cost of all materials, all labour charges, brushes etc, complete as per standard specification
Supply and run off 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed CU conductor of 1100V grade in rigid PVC pipe concealed in wall and ceilling with continuous earth wire connection of 14 SWG TC wire for making good of concealed portion with suitable colour
Supply and run off 3x4 sq.mm (56/0.3) PVC insulated SC unsheathed CU conductor of 1100V grade in rigid PVC pipe concealed in wall and ceilling with continuous earth wire connection of 14 SWG TC wire for making good of concealed portion with suitable colour
Supply of 25mm dia PVC pipe 4ksc
Supply of 20mm dia PVC pipe 4ksc
Supply of 20mm PVC tap
Supply and fixing of single box type 11 W CFL fitting complete with copper choke and condenser with TW round blocks on wall ceilling with flu tube with PVC unsheated copper leads from terminals to the fitting
Supply and fixing of fancy glass shade and 11W CFL for BH point.
Supply and fixing of PVC Water Tank
SECURITY ROOM Earth work excavation and depositing on bank with initial lead of 10 meters and initial lift of 2 meters in hard stiff clay, stiff block cotton hard red earth, murrams, gravel stoney earth and earth mixed with small size boulders and hard gravel soil etc., complete as per standard specification.
Plain Cement concrete 1:4:8 [one cement, four M-sand and eight course aggregates] using 40mm size Hard Broken / Machine crushed Granite Stone Jelly including dewatering if found necessary and laid in layer so not more than 15cm thick and compacted etc., complete complying with standard specification.
Supply and erecting shuttering including necessary supports for plane surfaces such as RCC column, footing, plinth beam, stair case etc., in all floors using mild steel sheets of 90cm X 60cm and 10 gauge stiffened with welded mild steel angle for boarding supported by casurina props at suitable intervals etc., completed complying with standard specification
Supplying and erecting centering for soffits of RCC slabs, plane surface like lintels, beams etc., including strutting 3m high using mild steel sheets of size 90cm x 60cm and BG 10 stiffened with M.S angles of size 25mm x 25mm x 3mm laid over silver Oak (C.W) joists of size 10cm x 6.5cm (spaced at about 90cm c/c) and supported by casurina props of 10cm to 13cm dia (spaced of 75cm c/c) etc., complete complying with standard specification.
Supplying and erecting centering for sides soffits including supports and strutting upto 3.29m high for plain surface such as rectangular column top and bottom slabs of boxing, sill, slabs, sun shade etc., in all floors using mild steel slabs of sizes 90cm x 60cm and BG 10 stiffened with welded mild steel angles of size 25X25x3mm for boarding laid over country wood joists of size 10cm X 6.5cm spaced at about 90cm C/C and supported by casurina props of 10cm to 13cm dia spaced at 75cm C/C etc., complete as directed. Sl.No.123 C Part-II., complete complying with standard specification.
Supply and Filling with well gravel layer by layer including cost of watering,consolidation,ramming and cost and conveyance of all materials etc., complete as per specifications.
Supplying, fabricating and placing in position of Steel Reinforcement using Mild Steel or Ribbed Tor steel bars for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors etc., complete complying with standard specification.
Reinforced cement concrete 1:1½:3 [one cement, one and half M-sand and three course aggregates] using 20mm size Hard Broken / Machine crushed Granite Stone Jelly for all RCC items of works excluding centering, shuttering and cost of reinforcement, including curing, fixing fan clamp and fixtures if necessary etc., complete complying with standard specification.
Fly Ash Brick work In CM 1:5 mix (one cement and five M-sand) using best Fly Ash Bricks of size 230 x 110 x 70mm including finishing, curing etc., complete complying with standard specification.
Plastering with cement mortar 1:5 mix, 12mm thick in all floors using clean screened sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including the cost of preparing the surface for plastering and protecting from other damages till setting of mortar etc., complete complying with standard specification.
Plastering with cement mortar 1:3 mix (one cement and three sand) 12mm thick in all floors using clean screened sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including the cost of preparing the surface for plastering and protecting from other damages till setting of mortar etc., complete complying with standard specification.
Weathering course in concrete broken stone brick jelly 20mm size in pure slacked lime over RCC slab.The proporation being 32:12:5 for requuired slope and the thickness of as required and well beaten with wooden beaters etc., completed
Terrace flooring with one couse of pressed tiles of size 23 X 23 in cement mortar 1:3 mix with impermo oil 2% by weight of cement and pointed with same oiled mortar
Providing and fixing casement doors fabricated from un plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside.Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug.
Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with G1/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work
Paving the floor with Vitrified Floor Tiles of size 60 X 60cm of approved brand and colour Marbonite tiles in all floors base layer of cement mortar 1:3 (one cement and three sand) 20mm thick using first quality Marbonite tiles of size 60 X 60cm and point with colour cement neatly and fixed in position so as to make perfectly smooth and to alignment etc., complete complying with standard specification.
Painting two coats with approved first quality Cement Paint over one priming coat of cement paint over plastered New / Old Wall surface and ceiling including cost of one priming coat, Cost of all materials, all labour charges, brushes etc, complete as per standard specification
Supply and run off 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed CU conductor of 1100V grade in rigid PVC pipe concealed in wall and ceilling with continuous earth wire connection of 14 SWG TC wire for making good of concealed portion with suitable colour
Supply and run off 3x4 sq.mm (56/0.3) PVC insulated SC unsheathed CU conductor of 1100V grade in rigid PVC pipe concealed in wall and ceilling with continuous earth wire connection of 14 SWG TC wire for making good of concealed portion with suitable colour
Wiring with 2x15 Sq.mm (22/0.3) PVC Insulated SC unsheathed CU conductor of 1100V grade in Suitable PVC rigid pipe concealed in wall and ceilling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A.F.T switch with continuous earth wire connection of 14 SWG TC wire for making good of concealed portion with suitable colour PVC concealed light or fan point.
Supply and fixing of single box type 4'20W LED fitting complete with copper choke and condenser with TW round blocks on wall ceilling with flu tube with PVC unsheated copper leads from terminals to the fitting
Supply and fixing of fancy glass shade and 11W CFL for BH point.
Supply and fixing of 1200mm (48") AC ceilling fan complete with stepped electronic 300W regulator with 1.1 meter down rod on the existing clamp
Supply and fixing of electrical specials of an approved brands and qality et complete
2 pole MCB
1 pole MCB 6 A
32amp DB Switch
Supply and insallation maintenance free GI Earthing System comprising of 50mm dia and 2 mtr. long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs. of carbon based environment friendly backfill compound and suitable clamp
Supply and Fixing of Industrial Type SPMCB DB with IP 54 Protection 12 ways single phase DB ,No. of ways incomer MCB / Isolator - 2 No. of ways incomer ELCB / RCD - 2 No. of outgoings ways - 10
WATER SUPPLY ARRANGEMENT Earth work excavation and depositing on bank with initial lead of 10 meters and initial lift of 2 meters in hard stiff clay, stiff block cotton hard red earth, murrams, gravel stoney earth and earth mixed with small size boulders and hard gravel soil etc., complete as per standard specification.
Plain Cement concrete 1:4:8 [one cement, four M-sand and eight course aggregates] using 40mm size Hard Broken / Machine crushed Granite Stone Jelly including dewatering if found necessary and laid in layer so not more than 15cm thick and compacted etc., complete complying with standard specification.
Plain Cement Concrete 1:2:4 (one cement, two fine aggregates and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification.
Fly Ash Brick work In CM 1:5 mix (one cement and five M-sand) using best Fly Ash Bricks of size 230 x 110 x 70mm including finishing, curing etc., complete complying with standard specification.
Plastering with cement mortar (1:3) 12mm thick in all floors using clean screened sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including the cost of preparing the surface for plastering and protecting from other damages till setting of mortar etc., complete complying with standard specification.
Supplying and erecting centering for soffits of RCC slabs, plane surface like lintels, beams etc., including strutting 3m high using mild steel sheets of size 90cm x 60cm and BG 10 stiffened with M.S angles of size 25mm x 25mm x 3mm laid over silver Oak (C.W) joists of size 10cm x 6.5cm (spaced at about 90cm c/c) and supported by casurina props of 10cm to 13cm dia (spaced of 75cm c/c) etc., complete complying with standard specification.
Reinforced cement concrete 1:1½:3 [one cement, one and half M-sand and three course aggregates] using 20mm size Hard Broken / Machine crushed Granite Stone Jelly for all RCC items of works excluding centering, shuttering and cost of reinforcement, including curing, fixing fan clamp and fixtures if necessary etc., complete complying with standard specification.
Supplying, fabricating and placing in position of Steel Reinforcement using Mild Steel or Ribbed Tor steel bars for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors etc., complete complying with standard specification.
Supply and fixing of SFRC manhole cover
Supply and fixing of 1.0 HP Monoblock Pump
Supply and fixing of single phase panel board with two level guard
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .