COMPREHENSIVE REPAIRS TO MD ACCN OF PH II AND REPAIR TO INTERNAL ELECTRIFICATION INCLUDING REPAIR TO FLAME PROOF FITTINGS UNDER GE NARANGI

Amount

Demolition of plain cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.

Demolition of cement concrete ( unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in fixing of hold fast or bed block complete all as specified and directed.

M & L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed.

M&L for 25mm thick PCC 1:2:4, type B0 (using 12.50mm graded stone aggregate) as in floor/ roofs finished the surface even and smooth with using extra cement complete all as specified and as directed.

M&L for 50mm thick PCC 1:3:6, type C-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed.

M&L for PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in back filling of pressed steel door/window frame complete all as specified and directed.

M&L for PCC 1:5:10 type E-2 (using 40mm graded stone aggregate) as in filling of sunken floors complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillar including coping etc. complete all as specified and as directed.

M&L for brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed.

All as per item No.10 above but except bricks. ( Serviceable bricks shall be obtained from demolition of old brick work) complete all as specified and as directed.

M&L for brick work with sub class ‘B’ bricks, (locally available best quality) straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and as directed.

Taking down cement plaster on walls, chajja surfaces, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M & L for rendering 10 mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed

M&L for 15mm thick rendering in cement mortar (1:4), in two layers, under coat of 10 mm thick & top of 5 mm thick, to other than fair faces of brick or concrete wall surfaces, top layer 5 mm thick mixed with water proofing compound (@ 2% by weight of cement or as per manufacture's instructions), finished even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound will be measured and paid separately as "Supply only".

M&L for rendering 5mm thick in cement mortar (1:3) on fair faces of RCC concrete surfaces and including applying cement slurry in bottom of slab, chajjas, fin, facias etc. complete all as specified and as directed.

M&L for rendering 10mm thick bedding layer in cement mortar (1:4) on roof top, sunken floor surfaces in single layer mixed with WPC @ 2% by weight of cement for laying floor finish etc. complete all as specified and as directed. ( Note: WPC shall be measured and paid seperately under relevent item as Supply only).

M&L applying two coats @ 1.50Kg per square metre per coat minimum of two componenets of water proofing treatment on RCC roof/wall/sunken surfaces or plastered surfaces with Nito proof 100 as priming coat and Nito proof 120 or 100 as finishing coat of Forsoc or equivalent approved make

Supply only integral water proofing compound complete all as specified and as directed.

M&L for preparation of newly plastered surface of walls and applying two coat of cement base paint over a coat of primer complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L for preparetion of new plastered surfaces of wall and applying two coat of oil bound distemper over a coat of primer complete all as specified and directed .

M&L for complete removal of existing treatment of wall surfaces, applying two coat of oil bound distemper over a coat of primer is obtained complete all as specified and directed .

M & L for preparing new surfaces of wood and wood based materials of any description exceeding 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and directed.

M&L preparation of new or previously untreated surface of steel and iron work of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of red oxide primer complete all as specified & as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F for Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe 290, Gde-E-165 completed all as specified and directed.

S&F in repairs, suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system ) of grid size 600mmx600 mm with main runner 38 mm x 24 mm and wall angle 24mm x 24mm using 4mm thick High Pressure stean Crude Everest Non Asbestos Fiber Cement plain Board (E-Board Classic) in & including a grid of GI system duly suspended with 4mm dia GI wire hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures,air conditioning diffuser and ducts ,sprinkler ,smoke detectors etc.The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. the last hanger at the end of each main runner should not be placed at more than 450mm from the adjucent wall,Flush fitting 1220 mm cross tee to be interlocked between main runners @ 610mm c/c,so as to form 600mm x 600 mm grid complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area n.exc. 1.5 Sqm each including builders hardware complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exceeding 1.5 Sqm but not exceeding 4 Sqm each including builders hardware complete all as specified and as directed.

Taking down chowkats or frames area exceeding 1.5 Sqm but not exceeding 4 Sqm each including builders hardware complete all as specified and as directed.

Taking down shutter of any description area n.exc 1 sqm each including builders hardware complete all as specified and as directed.

Taking down shutter of any description exc 1 Sqm but n exc 2 Sqm each including builders hardware complete all as specified and directed.

Taking down shutter of any description exc 1 Sqm but n exc 2 Sqm each and refixing in same opening complete all as specified and directed.

M&L for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

M&L for 1.25mm thick factory made pressed steel frames of size 105x60mm for doors with single rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

M&L for 1.25mm thick factory made pressed steel frames of size 125x60mm for doors with single rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

S&F 30mm thick flush shutter, solid core construction with particle board core and plywood face panel, commercial type on both side complete all as specified and directed.

S&F 30mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc with plain, chamfered or rounded, mitred beads (with sash bars) for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (b) complete all as specified and directed.

S&F 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc with plain, chamfered or rounded, mitred beads (without sash bars) for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (a) complete all as specified and directed.

S&F factory made single extruded WPC( Wood Polymer Composite) solid plain flush door shutter of 30mm thick comprising of virgin PVC polymer of K value 58-60 ( Suspension grade), calcium carbonate and natural fibres ( Wood powder/Rice husk/Wheat husk) and non toxic additives ( maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/cum, screw withdrawl strength of 1800N ( Face) and 900N ( Edge) , minimum compressive strength of 50N/sqmm modules of elasticity 850N/sqmm and resistance to spread of flame of class A category with property of being termite/borer proof, water / moisture proof and fire retardent and fixed with SS butt hinge of required size with necessary full body threaded star headed counter sunk SS screws. ( SS buttt hinge and necessary SS screws shall be measured and paid seperately) .

S&F factory made single extruded WPC( Wood Polymer Composite) solid plain flush door shutter of 18mm thick comprising of virgin PVC polymer of K value 58-60 ( Suspension grade), calcium carbonate and natural fibres ( Wood powder/Rice husk/Wheat husk) and non toxic additives ( maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/cum, screw withdrawl strength of 1800N ( Face) and 900N ( Edge) , minimum compressive strength of 50N/sqmm modules of elasticity 850N/sqmm and resistance to spread of flame of class A category with property of being termite/borer proof, water / moisture proof and fire retardent and fixed with SS butt hinge of required size with necessary full body threaded star headed counter sunk SS screws. ( SS buttt hinge and necessary SS screws shall be measured and paid seperately) .

S&F factory made single extruded WPC( Wood Polymer Composite) solid door/window/Ceosetory windows and other frames/chowkats of size 50X100mm comprising of virgin PVC polymer of K value 58-60 ( Suspension grade), calcium carbonate and natural fibres ( Wood powder/Rice husk/Wheat husk) and non toxic additives ( maximum toxicity index of 12 for 100 gms) febricated with miter joints after applying PVC solvent cement and screwed with fulll body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawl strength of 2200N ( Face) and 1100N ( Edge) , minimum compressive strength of 58N/sqmm modules of elasticity 900N/sqmm and resistance to spread of flame of class A category with property of being termite/borer proof, water / moisture proof and fire retardent and fixed in position with MS hold fast/lugs/SS desh fasteners of required dia and length. ( MS hold fast/Lugs or SS dash fastener shall be measured and paid seperately) Note : For WPC solid door/window frame plus minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable complete all as specified and directed.

S&F factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails, MS frames shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stills and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/ scaled to the stiles and rails with suitable PVC Sheet beading and jointed together with solvent cement as per drawings and specifications as catered in SSR Part – II 2004 complete all as specified and directed.

S&F in repair 18/19mm thick block boards grade 2 quality interior grade commercial type fixed with screws to timber frame work as in cup boards and shelves complete all as specified and directed.

S&F steel window with side hung shutter glazed shutter ibncluding both side openable ( outsude glazed window and inside fly proof window) including projecting type hinges with steel handle and steel peg stay complete with glazing bars and 12 mm square bar or round bar of approved design welded to steel window frame dovetailed or welded complete all as specified and directed.( Guard bar or square bar shall be measured and paid seperately).

S&F steel ventilators with top hung shutters including hinges , steel peg stay complete all as specified & as directed .

S&F stainless steel butt hinges 100 mm long complete all as specified and as directed.

S&F stainless steel butt hinges 75 mm long complete all as specified and as directed.

S&F 100mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm size extruded aluminium handles, cast type, anodised complete all as specified and directed.

S&F 100 mm size aluminium alloy handles, cast type, anodised complete all as specified and as directed.

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and directed

S&F in repair steel helical door spring 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F in repair 25mm dia harrison rails mild steel chromium plated with fixing brackets, stops, rollers etc. complete all as specified and as directed.

S&F in repair powder coated bracket for 25mm dia curtain rod omplete all as specified and as directed.

S&F stain-less steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless wire staples complete all as specified and as directed.

S&F in repair stain-less steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless wire staples complete all as specified and as directed.

Hacking out old broken glass (any thickness, quality or description) from wooden/steel frame or stone concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

S & F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed.

S&F 3mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq.m in each pane complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing complete all as specified and directed.

M & L for coloured Non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M & L for coloured Non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M & L for coloured Non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, in vertical surfaces such as skirting, dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 10mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M&L for glazed light coloured/printed ceramic tiles 300x200x7mm/350x250x7mm/450x350x7mm thick in vertical surfaces such as skirting, dado etc set and jointed in neat cement slurry, pointed in white or coloured cement to match colour of tiles, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

Demolition of stone slab and tiles of any description or thickness in floor, apron etc laid, bedded and pointed in cement mortar complete all as specified and as directed.

M&L for 18 to 20 mm thick granite (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and the like including pointing in white cement 1:2 using granite dust with admixture of pigment to match with the shade of granite work including rounding of exposed edges of granite over and including 15mm thick backing coat in cement mortar 1:4 complete all as specified and as directed.

Taking up or down 15 mm bore GI tubing from trenches / wall including all fittings segregated, cleaning and stacking the pipe for reuse at site if required complete all as specified and as directed. Note : Excavation and earthwork if any shall be included in the quoted rate

S & F GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Refixing old serviceable 15 mm bore steel tubing and connections as obtained from taking down including provision of new fittings, in new or old position of walls, ceiling, floor etc. complete all as specified and as directed.

Taking up or down 20 mm bore GI tubing from trenches / wall including all fittings segregated, cleaning and stacking the pipe for reuse at site if required complete all as specified and as directed. Note : Excavation and earthwork if any shall be included in the quoted rate.

S & F GI tubing 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Refixing old serviceable 20 mm bore steel tubing and connections as obtained from taking down including provision of new fittings, in new or old position of walls, ceiling, floor etc. complete all as specified and as directed.

S & F in repairs, bib taps, 15mm dia cast copper alloy chromium plated, fancy type with crutch or butter- fly handles screwed down for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repairs, PTMT bib taps 15mm dia standard any colour screwed doen for iron pipe and fixed (minimum weight 90gms) complete all as specified and directed.

S & F in repairs, 15 mm bore pillar taps, cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.

S & F in repairs, stop valves/ angular stop valve, 15mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directed.

S&F in repairs,grating doom 100m dia with waste hole of PTMT ( Minimum weight 25 gms) complete all as specified and as directed.

S&F in repairs,grating doom 125m dia with waste hole of PTMT ( Minimum weight 40 gms) complete all as specified and as directed.

S & F in repairs, waste coupling of PTMT 40mm (half or full thread) complete ( minimum weight -60gms) all as specified and as directed.

S & F in repairs, waste coupling of PTMT 32mm (half or full thread) complete ( minimum weight -45gms) all as specified and as directed.

M&L for mild steel Bands,supports,or stays for rainwater, ventilating pipes, including bolts if required, hooks( stay) , heavy, for large gates, hooks and pintle hinges, large hasp and staples, chains, hand made sliding bolts, clamps, holdfasts, wall ties, hooks for hanging fans, plain angle claets for securing purlins to wood trusses or rafters, knee piece inserts, two way or three way starps, plate washers and similar small articles quality confirming to Fe290-Gde E-165 complete all as specified & as directed.

S&F in repair, brass chromium plated tubular towel rail of 20mm dia and 60cm in length, D shaped, with brass chromium plated brackets complete all as specified and as directed.

S&F in repair PVC waste pipe of size 40mm dia for sink complete all as specified and directed.

S&F in repair PVC waste pipe of size 32mm dia for wash hand basin complete all as specified and directed.

S & F in repairs, 500 litres capacity rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I with and including 20mm bore dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc complete all as specified and as directed.

S&F in repair 25mm dia ball brass valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (Minimum weight 210 gms) complete all as specified & as directed.

S&F in repair 20mm dia ball brass valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (Minimum weight 210 gms) complete all as specified & as directed.

S & F in repairs, vitreous china wash hand basin, white flat back size 550 mm x 400 mm including brackets including pillar tap, 15 mm bore chromium plated, cast copper alloy with capstan heads, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts and PVC waste pipe,15mm dia PVC connection pipe complete all as specified and as directed

S & F in repairs, Vitreous China Squatting Pan"Orissa pattern" size 580 mmx440 mm white with integral foot rest etc. ( excluding cistern and flush pipe) including S or P Trap and provision of concrete bedding and making good to floor complete all as specified and as directed.

S & F in repairs, vitreous china wash down water closet (padestal pattern) including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set and including white or black seat cover for padestal pan with mild steel chromium plated aluminium hinging device, fixed to pan with suitable screws etc complete all as specified and as directed.

S&F in repair plastic water closet seat, white, closed pattern with flat bottom and cover with mild steel chromium plated or aluminium hinging device complete all as specified & as directed.

S&F in repair 40mm dia spout medium grade 40 cm long fixed in top of sunken slabs including cutting holes to wall and making good with CM 1:2 complete all as specified & as directed.

S & F in repairs, 10 Litres capacity PVC valveless syphonic action type, flushing cistern, low level, white or coloured, with inlet, ball valve, float and handle including brackets etc complete all as specified and as directed.

S & F in repairs, 125 mm, dia chromium plated, swivel type shower rose with 190 mm long chromium plated shower arm and wall flange suitable for fixing 15 mm bore iron pipe complete all as specified and as directed.

S&F PVC connections 15mm dia with PTMT nuts of length 450mm complete all as specified and as directed.

S & F in repairs, sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortat to dwarf wall or including fixing cantiliver brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed.

S & F in repairs, stainless steel kitchen rack made of 0.65mm thick stainless steel sheet of size,786mmX914mmX254mm fixed to wall with screws complete all as specified and as directed.

S&F in repair Cast iron floor trap 100mm dia with grating including jointing to waste pipe fixed in cement concrete type B-I ( 1:2:4) complete all as specified & as directed

Taking down carefully any type of point wiring (light, fan, bell, socket or power), complete excluding fittings but including switches, ceiling roses, pendants, regulators, sockets, etc. and making good disturbed surfaces of walls, ceiling, floors etc to match with existing surface complete all as specified and as directed.

M&L for point wiring with PVC insulated and unsheathed cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts, FRLS grade cable conforming to IS-694 1990 drawn in existing concealed/surface conduit including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for one light or fan point controlled by one 5 Amps switch one way complete all as specified and directed.

All as per item No 106 here-in-before but for one 3 pin 5 Amp switch socket outlet on independent board

All as per item No 106 here-in-before but for one 3 pin 5 Amp switch socket outlet on same board with other switches.

All as per item No 106 here-in-before but wiring with 2.5 sqmm size single core multistranded copper conductor cable for 6 pin 15 Amps switch socket combination outlet on independent board with 2.5 sqmm PVC insulated and unsheathed copper conductor as earth and connected to earth dolly.

Dismantling of old flameproof fittings for height not exceeding 20 feet for repairs/replacement etc.

S&F in repairs switch, flame proof, rotary type with terminal box in LM 6 , 16A single pole 250V complete all as specified and as directed.

S&F in repairs switch, flame proof, rotary type with terminal box in LM 6 , 16A double pole 250V complete all as specified and as directed.

S&F , switch piano, flush type single pole one way 5 Amps 230 volt complete all as specified and as directed.

S&F in repair switch piano, flush type single pole one way 5 Amps 230 volt complete all as specified and as directed.

S&F socket outlet 3 pin, 2-in-1, 5 Amps flush type complete all as specified and as directed.

S&F switch socket combination outlet 5 pin, 2-in-1, 5 Amp flush type complete all as specified and as directed.

S&F in repairs ceiling rose surface bakelite 65x50mm three terminal complete all as specified and as directed.

S&F in replacement CMRI certified flame proof 2X16/20W LED tube fixture IP65 protection including lamp and all accessories complete all as specified and as directed. Make: Crompton/Sudhir/Philips

S&F in replacement CMRI certified flame proof 1X16/20W LED tube fixture IP65 protection including lamp and all accessories complete all as specified and as directed. Make: Crompton/Sudhir/Philips

S&F in replacement CMRI certified flame proof 2X8W LED tube fixture IP65 protection including lamp and all accessories complete all as specified and as directed. Make: Crompton/Sudhir/Philips

S&F in replacement CMRI certified flame proof 1X8W LED tube fixture IP65 protection including lamp and all accessories complete all as specified and as directed. Make: Crompton/Sudhir/Philips

S&F in replacement CMRI certified LED flame proof wall glass luminaire die cast aluminium housing with heat resistant toughened glass IP65 protection, including lamp 30 W and all accessories complete all as specified and as directed. Make: Crompton Cat Part No. FWL 1315-30 CDL or equivalent inSudhir/Philips

S&F in repairs, decorative hexagonal bulk head LED luminaire 10 Watt, 6000K with IP 66 protection complete all as specified and as directed. Model HEXAFT10WLED857SSYMBOPC Make Havells or equivalent model of make Philips /GE/Crompton.

S&F in repairs, LED ( Double side connection) ultra bright polycarbonate tube light 20W retrofit in existing fluorescent tube light fittingcomplete all as specified and as directed. Model CRYSTAL1213T8DSTL20W LED 865 SGLASS Make Havells or equivalent model of make Philips /GE/Crompton.

Supply, install, testing and commissioning of flame proof distribution board as per IS13346 (2004) and IS 15142(2002) and protection grade IP 65 made of cat aluminium alloy LM 6 totally enclosed with O ring prewired and enclosed with residual current breaker operators ( RCBO) 40 to 63 Amps, 4 pole, residual current rating capacity 100mA with TPN connector and one incomer cable gland, one flame proof chamber as incomer and MCBs SP ^ Amps ( 6to 8 Nos.) flame proof chamber as outgoing complete.Make Sudhir/Cropmpton/ Havells/ Philips

S&F MCBs, SP 6 to 32 Amps, 10 KA, IS/IEC 60898-1 2002 marked fixing in DBs complete all as specified and as directed. Make :- Legrand Cat No 4085 87 to 4085 95 or equivalent model of make Hager/ Siemens/ ABB/Schneider/GE/C&S Electricals Ltd.

S&F in replacement MCBs, SP 40 to 63 Amps, 10 KA, IS/IEC 60898-1 2002 marked fixing in DBs complete all as specified and as directed. Make :- Legrand Cat No 4086 09 to 4086 17or equivalent model of make Hager/ Siemens/ ABB/Schneider/GE/C&S Electricals Ltd.

M & L for Sub main wiring with 2 runs of 6.0 sqmm, single core, PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20 mm dia non metallic PVC grey conduit conforming to IS-9537 with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 6 sqmm single core PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and any type of conduitcomplete all as specified and as directed. Note : Three runs of cable and one run of PVC conduit will be measured as one Rm unit.

M&L for earthing complete with GI earth plate electrode of size 60cm x 60cm x 6.3mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filling in alternate layers etc and connected to and including 4mm dia GI wire upto 7.5 m by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 15mm dia GI pipe connected to main control board and GI pipe medium grade 20mm bore for watering and including funnel, wire mesh, charcoal,salt etc RCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate) including excavation and earthwork disposal of surplus soil to distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009 including demolition of old earthing complete all as specified and as directed.