SPL REPAIR TO MD OFFRS QTR NO P- 045 5 P 982 6 P 1009 5 IN NOE AND KOTA STONE FLOORING OTHER CONNECTED WORKS TO BLDG NO P 23 OF FOD AND CERTAI MINOR AND REVENUE WORKS AT BB CANTT SRINAGAR

Amount

Taking down chokats or frame with shutters (without taking off shutters from frame) n.exc 1.5 sqm each and removing from site complete all as specified and directed.

Taking down chokats or frame with shutters (without taking off shutters from frame) exc 1.5sqm and n.exc 4.0sqm each and removing from site complete all as specified and directed.

S&F 2nd class hard-wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and directed.

M&L for 35mm thick 2nd class hard wood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part-I), kiln easoned and chemically pressure treated complete all as specified and directed.

S&F 35mm thick 2nd class hardwood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24(a) fitted to chowkats complete all as specified and directed.

S&F powder coated aluminium anodised (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections/ 3 track and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed.

S&F aluminium anodised window and ventilator shutters powder coating of any colour (Thickness or powder coating not less than 50 micron, side hung type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handle, locking arrangement and with all required fittings etc. complete all as specified and directed.

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and as directed.

S&F 5mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane complete all as specified.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified.

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples etc complete all as specified and directed.

Dismantling wall, ceiling and floor boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

S&F 12mm thick block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work including teak wood lipping of required thickness complete all as specified and directed.

S&F 1.5mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, including necessary fillets/cornices fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

S&F 12mm thick plywood, grade BWR, type BB, fixed with screws to timber frame-work complete all as specified and directed.

S&F 6mm thick Non Asbestos fibre cement designer board /Pre Laminated self embossed texture designer board E-Board classic size 600x600mm, HPSC (High pressure steam cured) to be fixed or inserted to pre laminated GI frame work for seamless ceiling size 600mmx 600mm with main runner 38x24x0.9mm thick, cross tee 8.6x0.9mm and wall angle 19x19x0.9mm duly suspended with 6mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip complete all as specified and directed.

S & F butt hinges medium weight 100mm size colled rolled mild steel complete all as specified and directed.

S & F butt hinges medium weight 75mm size colled rolled mild steel complete all as specified and directed.

S&F 150mm size extruded aluminium handles fabricated type, anodised all as specified and directed.

S & F 150mm size aluminium anodised barrel tower bolts of extruded section all as specified and directed.

S&F 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy all as specified and directed.

S&F Hasp and staple 100mm safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws all as specified and directed.

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flap 30mm when open all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and directed.

M&L for brickwork with old size sub class 'B' bricks straight or curved on plan exc 6m mean radius and built in CM 1:6 complete all as specified and directed.

Taking down cement plaster of any description, on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M & L for rendering 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 10mm thick in CM (1:4) on fair faces of brick work or concrete surfaces finished even and fair complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F for Framed brackets of angles or tees with web and flanges, tubular pipes cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Vitrified Ceramic tiles 9-10 mm thick (square/ rectangular) double charged dark shade, polished, area of each tiles not exceeding 0.36sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick screed bed in CM 1:6 complete all specified and directed.

M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick screed bed in CM 1:6 complete all specified and directed.

M&L for coloured glazed ceramic tiles on vertical surface as in dado, skirting etc of size 350x250x7mm/ 450X350X7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile fixed over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

Hacking out old broken glass (any thickness size quality ) from metal frames including punching or drilling out old glazing pins/spring clips complete all as specfied.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded in any mortar complete all as specified and directed.

M&L for 18-20mm thick Granite (of any type) in steps, jambs, pillars, window- cills, cooking platforms and like including rounding edges, laid over and including 15mm thick bedding layer in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified & directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F 110mm bore PVC (SWR) branch piece single equal or unequal complete all as specified and directed.

S&F 75mm bore PVC (SWR) branch piece single equal or unequal complete all as specified and directed.

S&F PVC (SWR) bends any radius 110mm bore complete all as specified and directed.

S&F PVC (SWR) bends any radius 75mm bore complete all as specified and directed.

S&F PVC (SWR) 'S' trap 110mm bore complete all as specified and directed.

S&F PVC (SWR) vent cowl any radius 110mm bore complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed.

S&F 3 layer PPR Polypropylene random copolymer concealed pipes of 16mm outer dia SDR 7.4 (PN16) UV stabilied and antimicrobial fusion welded having thermal stability for hot & cold water supply inclduing all PPR plain & brass threaded polypropylene random fittings fixed complete to walls, ceiling or in floors complete all as specified and directed

S&F 3 layer PPR Polypropylene random copolymer concealed pipes of 20mm outer dia SDR 7.4 (PN16) UV stabilied and antimicrobial fusion welded having thermal stability for hot & cold water supply inclduing all PPR plain & brass threaded polypropylene random fittings fixed complete to walls, ceiling or in floors complete all as specified and directed

S & F in repairs sinks with drainage board made of stainles steel sheet 1.0 mm thick kitchen or laboratory with plugs washers and waste pipes, including bedding in cement mortor to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx 460mm, bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs 15mm bore Brass CP mixer (sink/WHB/wall) for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repairs 75mm dia cast iron floor trap, with grating including jointing to waste pipe and fixed in cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) complete all as specified and directed.

S & F in repair vitreous China wash down (EWC) water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) but including plastic water closet seat cover closed pattern with flat bottom and cover with PVC hing devise, fixing bolt for pedestal pattern and PVC 'P' or 'S' trap complete all as specfied and directed.

S&F in repair PVC valve less, syphonic action type low level flushing cistern, white with inlet ball valve, float handle, including brackets 10 ltr capacity including 32 mm PVC flush pipe complete all as specified and directed.

S&F 450mm long (PVC connection) 15 mm bore with PTMT nut complete all as specified and directed.

S&F in repair brass chromium plated shower rose, 125mm size with or without swivel joints including fixing to 15mm bore steel pipe or union complete all as specified and directed.

S&F in repair vitreous china wash hand basin white, size 550 x 400mm,(flat back or angle back type) including brackets cutting for and pinning in ends of brackets including 32mm bore waste fittings, brass, chromium plated complete all as specified.

S&F in repair toilet paper holder, vitreous china, white, box type fixed to wall with chromium plated brass screws and rawl plugs complete all as specified and directed.

S&F in repair vitreous china, white, soap dish approximate size 160x160x90mm, fixed to plugs with chromium plated brass screws, complete all as specified and directed.

S&F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracked guard and railing 60 cm long fixed to rawl plugs with chromium plated brass screws & washers complete all as specified and directed.

S&F in repairs brass chromium plated Towel Rail 20mm dia complete all as specified and directed.

S&F towel ring of PTMT fixed with and including chromium plated brass screw and wooden/plastic cleats complete all as specified and directed.

S&F in repairs 15mm bore Bib taps, chromium plated, fancy type, screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and directed.

S&F in repair 15mm dia gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F 15mm bore stop valves or angle valve, fancy type chromium plated, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions etc complete all as specified and directed.

S&F 500 litres capacity rotational moulded polye-thylene water storage tanks three layers (cylindrical vertical with closed top) hoisted and fixed in position including brass float valve all as specified in SSR Part-I including dismantling old unserviceable water tanks complete all as specified and directed.

Demolition of plain cement concrete (un-reinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level) etc complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base/levelling course complete all as specified.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for RCC (nominal mix) 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including necessary form work complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

Dismantling of timber scantlings 40 sq. cm and over in section, in any position unframed work complete all as specified.

M&L for second class hard-wood in scantlings wrought fixed in frame work complete all as specified.

M&L for preparation of new wooden surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of previously treated wooden surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old plastered/ unplastered surfaces of wall (upto 3 storey) by washing down, brooming down with steel wire brush and removing all grass, vegitation or shrubs from wall and roof etc and applying two coats of cement base paint white or tinted all as specified and directed.

M&L for preparation of previously treated steel surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint at any height complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of suitable primer complete all specified and directed.

M & L for preparation of previously treated plastered surfaces of walls and applying two coats of oil bound distemper complete all specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F in repair plate rack made of stainless steel sheet 1.00mm thick of size 750mmx600mmx300 mm with steel shelves and hanging arrangments for utensil, complete all as specified and directed.

S&F in repair 100mm dia cast iron soil waste and vent pipe (spun pipe) in any length with or without ears, with cement joints, laid in trenches or in floor complete all as specified.

S&F in repair 75mm dia cast iron soil waste and vent pipe (spun pipe) in any length with or without ears, with cement joints, laid in trenches or in floor complete all as specified.

S&F 25mm dia stainless steel drapery rod, heavy duty, fancy type with brackets & domes two in each door and window complete all as specified and directed.

M&L for providing and laying wooden laminated flooring in strips of size 1200x200x10-12mm thick fixed above PVC sheet and cushion over 9mm thick plywood grade BWR type BB (5 Nos of ply) fxed with nails to timber as per manufacturer's instructions complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge thickness, including nanital or similar pattern roof covering complete all as specified and directed.

S&F 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with 'L' or 'J' type hook or cranked bolt and washers, in roof, wall etc with grade of zinc coating 275 complete all as specified and directed.

S&F 0.63mm thick plain, galvanised, mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, fixed with coach screws and washers complete all as specified.

S&F 30mm thick 2nd class hardwood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24(b) fitted to chowkats complete all as specified and directed.

S&F 150mm size aluminium handles cast type, anodised all as specified and directed.

S&F 100mm size aluminium handles cast type, anodised all as specified and directed.

S & F 100mm size aluminium anodised barrel tower bolts of extruded section all as specified and directed.

S&F 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy all as specified and directed.

S&F 4mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or with aluminium beading to aluminium joinery in pannels complete all as specified and directed.

M&L for 20-25mm thick machine cut kota stone slab, as in floor over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over and including 20mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.

M&L for 20-25mm thick machine cut kota stone slab, as in skirting, dado, steps and pillar etc over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete fixed over and including 10mm thick backing layer in CM 1:4 complete all as specified and as directed.

M&L for 75mm thick PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in plinth protection, finished concrete surfaces even and smooth without using extra cement and filling joints with bitumastic filling in proporation bitumen and coarse sand mixture. 1:2 complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of suitable primer over and including 1-2mm thick layer of wall putty to obtain even/smooth surface using sand paper complete all specified and directed.

S&F aluminium anodised door shutters powder coating of any colour (Thickness or powder coating not less than 50 micron, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handle, locking arrangement and with all required fittings etc. complete all as specified and directed.

S&F aluminium anodised window and ventilator shutters powder coating of any colour (Thickness or powder coating not less than 50 micron, fixed/sliding type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handle, locking arrangement and with all required fittings etc. complete all as specified and directed.

M&L for providing and fixing stainless steel (Grade 304) gate/ railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel hinges, nuts and bolts complete, including fixing the gate/ railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts, SS hinges etc., of required size, on the top of floor or the side of waist slab and in the wall/ pillers with suitable arrangement complete all as specified and directed.

S&F 9mm thick plywood, grade BWR, type BB, fixed with screws to timber frame-work complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of cement base paint complete all as specified and directed.

Taking down carefully existing old burn out/unserviceable copper/aluminium point wiring any type (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing old materials tfrom site and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

M&L for point wiring with PVC insulated FRLS wire, 1100 volt grade with multistranded copper conductor wire of size 1.5 Sqmm (Nominal area) drawn through in heavy duty ISI marked PVC Casing capping / PVC conduit of suitable size along with its all connected fittings accessories including providing of modular type/size of pressed steel terminal sunken boxes 1.2 mm thick or PVC flush type box and dully fixed it concealed on wall or surface on wall and covered with suitable size of modular type back and face PVC top cover plate frame for housing/mounting of switches, sockets, regulators etc and also providing 1.5sqmm PVC insulated FRLS wire, 1100 Volt grade (ISI Marked) with multistranded copper conductor wire used as a continuous earth wire complete and including making good all disturbed surfaces to match the existing surface of wall/floor/ceiling etc. all as specified and directed for following:-

One light/fan point controlled by one way switch 5 Amp

One 3/5 pin socket outlet, 5 Amps on same board controlled by one way switch

One 3/5 pin socket outlet point, 5 Amps on independent board controlled by one way switch

Two way point controlled by two way switch point wiring system

One bell point controlled by one bell push switch of one way point wiring system

All as per Sl item No.110 above but using single runs of PVC insulated FRLS wire, 1100volt grade with multistranded copper conductor wire of size 2.5 Sqmm (Nominal area) power point wiring system with controlled by one way switch fixed on independent board and also providing of 2.5 sqmm PVC insulated FRLS wire , 1100 Volt grade (ISI Marked) with multistranded copper conductor wire used as continuous earth wire complete all as specified and directed

S&F modular type switch 5/6 Amps 220 Volts for one way switching system complete as specified and directed.

S&F modular type socket 5/6 Amps 220 Volts, 3/5 pin complete as specified and directed.

S&F modular type switch 15/16 Amps 220 Volts for one way switching system complete as specified and directed.

S&F modular type socket 15/16 Amps 220 Volts, 5/6 pin complete as specified and directed.

S&F modular type switch bell push of 5/6 Amps 220 Volts for one way switching system complete as specified and directed.

S&F bell Ding Dong type 220 Volts AC single pole complete as specified and directed.

S&F ceiling rose three terminals type made out of polycarbonate , isolated body complete all as specified and directed.

S & F angular/batten type shape lamp holder with PVC/ Polycarbonate insulated body, alongwith brass adaptor and back plate for housing of bulb complete all as specified and directed .

S&F one/two modular type step type electronic fan regulator with hum free step alongwith speed control knowb complete all as specified and as directed.

S & F in replacement LED tube light fitting 1 x 20W/ 22W, 220V AC decorative box type with eletronic driver, holder including LED tube light with having energy efficient including providing of suitable type of flat fexible cable for electric connection complete all as specified and directed.

S & F in replacement LED mirror light fitting with high output diffuser 2' long, 1x10W, 220V AC decorative type with eletronic driver, holder including LED lamp with having energy efficient including providing of suitable type of flat fexible cable for electric connection complete all as specified and directed.

S & F surface wall mounted decorative bracket light fitting with having stainless steel rust free fixture with white glass diffuser alongwith bulb holder based adhaptor suitable for 7.5/9W LED filament lamp E-27 base including providing of 1Nx9W LED lamp use in both warm/white type colour complete set and including providing of suitable type of flat flexible two/three core cable and making electric connection all as specified and directed.

S & F surface mounted LED decorative type angle adjustable spot light/bed side study lamp light fitting with lamp in matt finish for premium aesthetics with based of suitable rating capacity 7W LED fixture in required fitting use in both warm/white type colour complete set and including providing of suitable type of flat flexible two/three core cable and making electric connection all as specified and directed.

S&F surface mounted LED bulk head luminaries light fitting of rated capacity 10W including LED lamp & driver, out door type with dust and water proof, energy efficient for ready to use and required in both warm/white type colour fixture complete including dully fixed on bldg wall surface including providing of suitable type of flat flexible two/three core cable and making electric connection and including taking down of old fitting all as specified and directed.

S&F ventilating exhaust fan made out of sturdy engineering plastic body complete with louvers and shutter, 250mm sweep suitable to work on 230 Volts 50 Hz, 1200 RPM, coper winding including making of suitable type /size of hole on wall and fixing compete with nut, bolt etc all as specified and directed.

S & F in replacement sheet metal enclosure duly powder coated with double pole and neutral enclosure with having a two pin and earth plug socket base & metal plug top and having mounting channel with one MCB SPN 20 Amp and making all necessary electrical connection and dully fixed surface on wall or concealed in wall with the help of cutting chases to wall for fixing of DB and making good the disturbed wall surface all as required at site complete all as specified and as directed.

S&F in replacement sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrangement system suitable of rating of size/type of distribution board of rating SPN 12 way type 220 volt AC supply system with IP-43 protection rating and having neutral and earth link bus bar mounting base channel for holding MCBs incommer and outgoing complete set and also making all necessary electrical connection and dully fixed surface on wall or concealed in wall with the help of cutting chases to wall for fixing of DB and making good the disturbed wall surface complete all as specified and as directed.

S&F MCB SPN 40 to 63 Amps, 230 Volts, 50 Hz AC supply suitable for 'C' series, 10 KA breaking capacity complete all as specified and directed.

S&F MCB SP 6 to 32 Amps, 240 Volts, 50 Hz AC supply suitable for 'C' series, 10 KA breaking capacity complete all as specified and directed.

M&L for sub main wiring system with two runs PVC insulated FRLS wire, 1100 volt grade with multistranded copper conductor wire of size 2x10Sqmm and one run of 1x10 Sqmm (Nominal area) (ISI Marked) as in earth wire any type any length drawn through in heavy duty ISI marked PVC Casing capping / PVC conduit of suitable size along with its all fittings and connected accessories and duly fixed concealed on wall or surface on wall including taking down old sub main wiring and making good the disturbed wall surface complete all as specified and as directed. Note:- 3 runs of 10sqmm wire and one run of PVC cassing capping/conduit shall be measured and 1.0 RM.

M&L for sub main wiring system with two runs PVC insulated FRLS wire, 1100 volt grade with multistranded copper conductor wire of size 2x6Sqmm and one run of 1x6 Sqmm (Nominal area) (ISI Marked) as in earth wire any type any length drawn through in heavy duty ISI marked PVC Casing capping / PVC conduit of suitable size along with its all fittings and connected accessories and duly fixed concealed on wall or surface on wall and making electrical connection complete all as specified and as directed. Note:- 3 runs of 6sqmm wire and one run of PVC cassing capping/conduit shall be measured and 1.0 RM.

M&L for taking down carefully existing ceiling/exhaust fan and geyser any type and capacity and removing fan blade and body parts and cleaning all dust and filling cavities with filler material, oiling, greasing including painting fan with blade and geyser complete body by applying two coats of synthetic enamel paint and assemble the same alongwith all connecting & fixing accessories such as rubber reel, nut, bolt, washer, lock pin, clamp etc and hanging and refixing the same in position with providing nut, bolt and washer etc and making electric connection complete all as specified and directed.

M/S Vivek Gupta and Co (BID ID -3111262)

M/S SK ATLANTIC ENTERPRISES (BID ID -3123774)