REPAIR TO STEEL FURNITURE INCLUDING PAINTING UNDER GE (N) MAMUN AT MAMUN MIL STN

Amount

Repair to Almirah large steel with replacement of following items (components) with new material complete all as specified ( Drg No:FD-1031 & 67(M)):-

Shelf made out of PGI sheet 1 mm thick

All as per srl item No 1.01 but fixing only loose/hanging shelves.

CP handles with washers (As per sample)

Locks brass with duplicate keys. (The locks shall be of GI with six brass levers, (As per sample)

Legs made out of 1mm thick PGI sheet

Base made out of PGI sheet 20 gauge

MS hinges 75mm long (as approved by GE), fixed by welding

MS round bar (locking rod) 10mm dia with brass bush fitting

M&L for scrubbing down all old painted steel surface, preparation of surface with denting where required, applying putty etc and spray painting with two coats of synthetic enamel paint (Olive Green) shade over a coat of metal primer, complete all as specified and directed.

Repair to Almirah Medium steel with replacement of following items(components) with new material complete all as specified ( FD-67 & 1032/1031):-

Shelf made out of PGI sheet 1mm thick

All as per srl item No 2.01 but fixing only loose/hanging shelves.

CP handles with washers (As per sample)

Locks brass with duplicate keys. (The locks shall be of GI with six brass levers, (As per sample)

Leg made out of 1mm thick PGI sheet

Base made out of PGI sheet 20 gauge

MS hinges 75mm long (as approved by GE) by welding

M&L for scrubbing down all old painted steel surface, preparation of surface with denting where required, applying putty etc and spray painting with two coats of synthetic enamel paint (Olive Green) shade over a coat of metal primer, complete all as specified and directed.

Repair to locker steel with replacement of following items (components) with new material complete all as specified (FD- 243 & 257):-

Shelf made out of PGI sheet 1 mm and fixing with rivetting on locker steel

All as per item srl No 3.01 but fixing only loose/hanging shutter.

CP handles 100mm long.

CP hasp & staples 75mm long

MS hinge 75mm long (as approved by GE) by welding

Leg made out of 1mm thick PGI sheet

Base/shelves made out of PGI sheet 1 mm

M&L for scrubbing down all old painted steel surface, preparation of surface with denting where required, applying putty etc and spray painting with two coats of synthetic enamel paint (Olive Green) shade over a coat of metal primer, complete all as specified and directed.

Repair to table office clerk steel with replacement of following items (components) with new material and labour complete and all as specified ( FD-84 (M), FD-1004):-

Table top size 4’x2’6” made out of 18mm thick MDF Board with glossy matt finish, 6mm thick teak wood beading alround the top duly French polished.

Drawer with 1mm thick PGI sheet (with denting/welding or any other means to enable all the three drawer to work smoothly).

Locks with new GI locks with brass lever with duplicate keys.

PVC shoes

M&L for scrubbing down all old painted steel surface, preparation of surface and spray painting with two coats of synthetic enamel paint (Olive Green) shade over a coat of metal primer, complete all as specified and directed.

Repair to Teapoy verandah steel with replacement of following items (components) with new material and labour complete and all as specified ( FD-383, 255):-

Top with new top of size 3'X1'6" made out of 18 mm thick HDHMR Board(high density high moisture resistance) with glossy matt finish, 6mm thick teak wood beading alround the top duly French polished.

PVC shoes

M&L for scrubbing down all old painted steel surface, preparation of surface and spray painting with two coats of synthetic enamel paint (Olive Green) shade over a coat of metal primer, complete all as specified and directed.

Repair to table office officer steel with replacement of following items (components) with new material and labour complete all as specified (FD-84 (M), FD-1003, HFD-2053):-

Top size as per drg made out of 18mm thick HDHMR Board (high density high moisture resistance) with matt finish, 6mm thick teak wood beading alround the top duly French polished.

Drawer with 1mm thick PGI sheet including the repairing the sliding surface of the drawer by smoothing the portion, denting/welding or any other means to enable all the three drawers to work smoothly

Locks with new brass lever locks with duplicate keys.

PVC shoe

PVC recessed Handle

M&L for scrubbing down all old painted steel surface, preparation of surface and spray painting with two coats of synthetic enamel paint (Olive Green) shade over a coat of metal primer, complete all as specified and directed.

Repairs to Table 3'x2' steel with Drawer replacement of following items (components) with new, material complete all as specified (Drg No: FD-1008):-

Top size 3'x2' made out of 18mm thick HDHMR Board(high density high moisture resistance) with glossy matt finish 6mm thick teak wood beading alround the top duly French polished.

Drawer with 1mm thick PGI sheet including the repairing the sliding surface of the drawer by smoothing the portion, denting/welding or any other means to enable all the drawers to work smoothly.

GI locks with brass lever with duplicate keys.

PVC shoes.

Handle

M&L for scrubbing down all old paint, preparation of surface with denting where required, applying putty etc and spray painting with two coats of synthetic enameled paint (Olive Green) shade over a coat of metal primer, complete all as specified and directed.

Repair to table 3'x2' steel without drawer with replacement of following items (components) with new material and labour complete all as specified (FD-1007):-

Table top with new top size 3'x2' made out of 18mm thick HDHMR Board(high density high moisture resistance) with glossy matt finish, 6mm thick teak wood beading alround the top duly French polished.

PVC shoe

M&L for scrubbing down all old painted steel surface, preparation of surface and spray painting with two coats of synthetic enamel paint (Olive Green) shade over a coat of metal primer, complete all as specified and directed.

Repair to CHAIR COMPUTER with replacement of following items (components) with new material and labour complete all as specified (FD/E6/MAP/01):-

Removing existing u/s seat foam and tapestry cloth and S & F new seat with the provision of plywood commercial 12mm, foam 3" and tapestry cloth not less than 350/- mtr all as per drg

Back with the new foam 2" and tapestry cloth (not less than 350/- mtr)

PVC moulded back frame with screws and PVC lipping

Hydraulic system (as per sample)

Castor wheel (as per sample)

PVC hand rest (as per sample)

Base of chair computer (As per sample)

Repair to table dinning ORs aluminum top with replacement of following items (components) with new material and labour complete all as specified ( FD-165 ):-

Top made out of 18mm thick BWR plywood commercial covered with 0.88 mm thick aluminium sheet with 5” over lapping with s/s screws

MS square 25mm 16 gauge in frame including stiffener duly welded.

M&L for welding upto 2.5mm long welding to steel frame with electric welding and smoothing the welding portion, scrubbing down all old painted steel surface, preparation of surface and spray painting with two coats of synthetic enamel paint (Olive Green) shade over a coat of metal primer, complete all as specified and directed.

Repair to chair steel tubular with/ without arms with replacement of following items (components) with new material and labour complete and all as specified ( FD-75 ):-

Seat made out of sheesham wood duly polished and canned with 2mm wide cane, (fixed with nuts and bolts) including welding MS flat 25 x 3mm 02 Nos (front & back) beneath the seat

All as per item No 11.01 but back of chair tubular steel with arms.

PVC shoes/ PVC Caps

M&L for scrubbing down all old painted steel surface, preparation of surface and spray painting with two coats of synthetic enamel paint (Olive Green) shade over a coat of metal primer, complete all as specified and directed.

Handle of chair tubular (As per sample)

Repair to Table 3'x3' Steel with replacement of following items (components) with new material and labour complete all as specified ( FD-1009 ):-

Table top with new top size 3'x3' made out of 18mm thick HDHMR Board(high density high moisture resistance) with glossy matt finish, 6mm thick teak wood beading alround the top duly French polished.

PVC shoes

M&L for scrubbing down all old painted steel surface, preparation of surface and spray painting with two coats of synthetic enamel paint (Olive Green) shade over a coat of metal primer, complete all as specified and directed.

Repairs to Chair CBA Steel Cushioned with replacement of following items(components) with new, material complete all as specified (Drg No: HFD-2045):-

Seat (U foam 3" thick 32 density covered with tapestry cloth of market rate not less than Rs. 350/- Per mtr. Make : Sleepwell/Kurlon or equivalent as approved

Back (U foam 3" thick 32 density covered with tapestry cloth of market rate not less than Rs. 350/- Per mtr. Make : Sleepwell/Kurlon or equivalent as approved

Hand rest made of black intergal skin polyurethane reinforced with MS insert .

Repair to Chair Writing Steel Cushioned with replacement of following items (components) with new material and labour complete and all as specified ( FD/E6/ MAP/12 ):-

Seat (U foam) covered with tapestry cloth of market rate not less than Rs. 350/- per mtr Make : Sleepwell/Kurlon or equivalent as approved

All as per item 14.01 but Back

Hand rest made of black intergal skin polyurethane reinforced with MS insert

Repair to Desk with replacement of following items (components) with new material and labour complete and all as specified ( FD-107 (M) ):-

Box made out of prelaminated particle board18mm extrerior quality alround 4mm thick TW beading over all, size 1270x530x840mm

MS tube 25mm dia cut and duly welded (as per sample), joint made smooth and applying one coat of red oxide primer.

S&F Rubber shoe (as per sample)

All exposed steel surfaces to be painted with two coats of synthetic enamel paint to the required finish after preparation of surface by sand papering, removing of old filth to smooth surface complete all as specified and directed.

Repair to Rack Adjustable 6 Tier with replacement of following items (components) with new material and labour complete and all as specified (FD-107M ):-

Shelf made out of 1.00mm thick PGI sheet

Spray painting with two coats of synthetic enamal paint Olive Green over a coat of metal primer after scrubbing all the old paint preparation of surface & denting where required, applying putty etc. complete all as specified and directed.

Repair to Bed Hard Steel with replacement of following items (components) with new material and labour complete all as specified ( FD/E6/MAP/8 (R) ):-

S&F in replacement of old unsv plastic seat (cum back) frames as shown in drg.

S&F in replacement of old unsv hnd board made out of 18mm thick prelamined MDF board of sixe as show in drg.

M&L for preparation of surface with applying putty etc and spray painting with two coats of black coloured synthetic emameled paint, complete all as specified and directed.

S&F in replacement of old unsv plastic shoes as shown in drg.

Repair to desk stand lecture with replacement of following parts/ components with new material complete all as specified (Drg No FD-1022).

S&F in replacement of old unsv table top made out of 18mm thick prelaminated MDF board of approved shade.

All as per item Srl No 18.01 but sides of desk made out of 12mm thick prelaminated MDF board as shown in drg.

All as per item Srl No 18.01 but front of desk as shown in drg.

All as per item Srl No 18.01 but shelf of desk as shown in drg.

Repair to Form with Back/without Back with replacement of following parts/ components with new componenets complete all as specified and directed(Drg No FD-78(M), FD-335 & FD-1027)

S&F in replacement of old unsv seat plank made out of teak wood duly polished as shown in drgs.

All as per item Srl No 19.01 but back plank as shown in drgs.

M&L for preparation of surface with applying putty etc and spray painting with two coats of black coloured synthetic enameled paint, complete all as specified and directed.

Repair to table computer with replacement of following parts with new component and all as specified (Drg No FD/E6/MAP/01)

S&F in replacement old unsv top made out of 18mm thick prelaminated MDF board of size as shown in drgs.

S&F in replacement old unsv Tray for keboard made out of 18 mm thick prelaminated MDF Board of appropriate shade.

S&F in replacement old unsv but tray for mouse paid duly fitted with handle

S&F in replacement old unsv drawer duly fitted with handle/ knob complete all as shown in drgs.

S&F in replacement old unsv side partition

M&L for preparation of surface with applying putty etc and spray painting with two coats of black coloured synthetic enameled paint, duly replaced unsv PVC shoes for balancing table computer, complete all as specified and directed.

M&L for removing unsv channels and S&F new channel of appropriate size as per drgs.

Repair to Book case steel with replacement of following components with new material complete all as specified (Drg No FD-1028)

M&L for preparation of surface with applying putty etc and spray painting with two coats of black coloured synthetic enameled paint, complete all as specified and directed.

S&F in replacement old unsv glass of appropriate size & 5/4 mm thickness as per drgs.

S&F in replacement old unsv handles knob

Repair to table centre with replacement of following components with new componenet all as specified (Drg No FD-274, FD-134)

S&F in replacement of old unsv glass of thickness 8mm size

Repair to table bed side with replacement of following components with new componenets complete all as specified (Drg No FD/E6/MAP/15R)

S&F in replacement of old unsv top/front/back/side as shown in drgs

S&F in replacement of old unsv MS frame back of shape and size as shown in drgs.

S&F in replacement of old unsv MS front legs of shape & size as shown in drgs.

S&F in replacement old unsv handles of appropriate size and shape as shown in drgs.

PVC Shoes

M/S Ajay Saini (BID ID -3511609)

vivek and co (BID ID -3511882)

M/S MALHI CONSTRUCTIONS (BID ID -3512037)