Proposed Development of Waterfront at Chena River in MBMC Area on the Model of Sabarmati river front in MBMC Area. (Basic Facility Development Fund)

Amount

Description

Excavation for foundation in earth, soils of all types, sand, gravel, soft murum including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed etc. complete. ( By Mechanical Means ) a) Upto 1.50m lift Normal Rate b) 1.50m to 3.00m lift, Add 10% c) 3.00m to 4.50m lift, Add 20% d) 4.50m to 6.0m lift, Add 30% SSR No 12.03

Excavation for foundation in hard murum including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed etc. complete. a) Upto 1.50m lift Normal Rate b) 1.50m to 3.00m lift, Add 10% c) 3.00m to 4.50m lift, Add 20% d) 4.50m to 6.0m lift, Add 30% SSR No 12.04

Excavation for foundation in hardrock by chiselling and wedging or line drilling including shoring and strutting, dewatering a snecessary and disposing off excavated stuff asd irected etc. complete SSR No 12.11

Excavation for foundation in soft rock including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed etc. complete. a) Upto 1.50m lift Normal Rate b) 1.50m to 3.00m lift, Add 10% c) 3.00m to 4.50m lift, Add 20% d) 4.50m to 6.0m lift, Add 30% SSR no 12.08

Excavation for foundation / pipe trenches in slush muddy / marshy / slushy / soil including use of poclain, labour for dewatering during execution including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, preparing the bed by cleaning the mud, labour required for execution for shuttering item but excluding backfilling, etc. complete. Providing and fixing shuttering shall??be??paid??separately. MJP SSR

Dewatering on BHP basis by using water pump including diversion of stream, providing coffer dams, earthern bunds etc. as may be necessary for foundation and other parts of the works and pumping out water during and after excavation as may be required by using 5.0 to 9.0 BHP pump etc. complete. (prior approval of Superint ending Engineer will be necessary). SSR no 12.23

Providing solingusing 80 mmsize trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete.) SSR no 21.40

Providing and laying in situ / ready mix / ready mix M15 cement concrete of trap / granite / quartzite / gneiss metal in foundation including necessary centering, formwork, bailing out water, compacting and curing etc. complete. (with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer / concrete batch mix plant (pan mixer) with natural /artifical sand) SSR no 24.04

Providing and laying Cast in situ / Ready Mix cement concrete in M20 of trap / granite / quartzite / gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying / pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering unevenand honeycombed surfaceonly. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro process or based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer) etc. complete. Withfine aggregate (Crushed sand VSI Grade) SSR no 24.10

Providing and laying Cast insitu / Ready Mix cement concrete in M-25 of trap /granite /quartzite /gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/ pumping, compacting and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mixplant (Panmixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR no 26.19

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. beams as per detailed designs and drawings or as directed including centering, SSR no 25.54

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, SSR no 25.35

Providing and laying Cast in situ / Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, SSR no 26.23

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR no 25.74

Providing and fixing in position HCRM / CRS (Corrosion Resistant Steel) bar reinforcementof various diameters forR.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detaileddesigns,drawingsandschedules. includingcutting,bending, hooking the bars, binding with wires or tack welding and supporting as required complete SSR no 26.34

Providing Fusion Bonded Epoxy Coating SSR no 26.41

Providing and fixing bituminous pad 25mm thick for expansion joints in retaining wall, compound wall etc. complete. SSR no 30.11

Conveying excavated material upto lid of 20KM (Lead Chart)

Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185 (Part3)-1984 in extra fine jointing mortar of fix oblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc.Complete.(The test shall be carried out conforming to IS:6441 (Part I) - 1972) SSR no 27.15

Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in Half brick thick wall including striking joints, raking out joints and scaffolding etc.Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972) SSR no 27.16

Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete SSR no 33.34

Providing sandfaced plaster externally in cement mortar using approved screened sand ,in all positions including base coat of 15 mm thick in cement mortar 1:4 using water proofing compound at 1 Kilogram per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receivet he sand faced treatment 6 to 8 mm thick in cement mortar1:4finishingthesurfacebytakingout grains and curing for fourteen days scaffolding etc.complete. SSR no 32.11

Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and inorganic gases (NOx, VOC’s, CO, SOx, formaldehydes, etc.) in presence of natural or artificial light. It contains Graphene and nanoparticles of titanium oxide. and Absorbs CO2 (4.8 Kilogram / 15l). plaster crack should be filled by Acrylic base Crack seal / Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise on site technical reports from the concerned company technologist. SSR no 50.79

Providing and laying weep holes of 100 mm diameter PVC pipes as per drawing for abutment returns, return walls etc. Complete. SSR no 17.37

Providing and fixing 900 mm high S.S.304 Grade Stainless steel railing with 40 mm diameter and 1.5mm thick at top,40 mm diameter and 1.5 mm thick vertical supports spaced at 1.5 m center to center and 8mm thick toughened glass including fabricating, fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete SSR no 40.07

Stamp Concrete of 100mm Thickness-Providing and Laying in-situ M30 Grade unreinforced plain cement stamp concrete of 100mm thickness pavement over a prepared sub base with 43 grade cement,coarse and fine aggregate (naturalsand/VSI grade finely washed crusheds and )Confirming to IS383,as per mixed in a batching and mixing plant/non tilting mixer and weigh batcher as per approved mix design,admixtures,transporting to site in nagpur city with lead upto 20KM (on Inner Ring Road from Avasti nagar to wadi),spreading,laying with approved make pover,compacted and finished in a continous operation,finishing to lines and grades. Also Providing,Placing and applying stamp powder which is light fast UV resistant pigment with appropriate chemical compounds of desired colour on base concrete after excess bleed water has evaporated using dry shake method@5kg per sqm.Including texturing,and covering with plastic sheet(min200micron thickness) and also applying two coats of UV-stable,30%solids clear sealer@150 to 250gms per sqm using surface roller and protecting from falling dust,dirt and curring by curring compound/by providing cement vata in cement Mortor1:[email protected] center to center,admeasuring 80mm at bottom and 40mm at top with depth of 75mm and maintaining the same through ou tcuring period by any other method approved byEngineer-in charge or Landscape architect etc.complete.(prior approval of superinteding Engineer will be necessary ) SSR/54.01

Providing and fixing kerb stone with led lighting system as per following specifications: dimensions with vertical mounting legs with10mm horizontal square shape mild steel reinforcements. Illuminated kerb stone having visible dimensions:- 500mmx150mmx150mm. (asperirc-86-1983) 80mm leg shaving ms reinforcements shall be embedded in bt/concrete road surface. the kerb stone should have kerb angle of 45degree, with rubber plugs at both ends of the kerb stones (2nos) having load carrying capacity-vertical:1465kg, horizontal:2349 (certified by govt. Recoganized bodies) having thermal stability-:-40 to 120degree celcius (certified by govt. Recoganized bodies. Illuminated kerb stones including: in grace protection and connect or rating ip 67, electrical wire- (asperis:694), ledstrip (asperlm:80) standard. Including for electrical fixing-frp junction box consisting of-10amp. Switch module power supply (smps) having input voltage-230vac, output voltage 36vdc, 2polemcb. Illuminated kerb stone shaving warranty for 3 years. illuminated kerb stone shall be fixed into cast-in-situ cement concrete of m20 grade at base, back filling and grooves, including dismantling, fixing, removal of dismantled material and cleaning etc.Complete.The colour of kerb stone shall be provided as directed by engineer in charge. SSR no 54.05

FRP Pargola for Seating (Market Rate)

Providing Geotextile filter fabric for retaining wall SSR Page no 543 Material rate

Providing structural steel work of rectangular hollow steel section for steel trusses, other similar trussed items like purlin and members with all bracing, gusset plates etc. as per detailed designs and drawings SSR no 23.11

Providing ,aupplying, fabricating and fixing panel of aluminium composite panel cladding in approved shapemadeoutof4mmthickACPsheetmaterialconsistingof3mmthickFRgrademineralcorefollowingNBCpartIVFireandlifesafety(having2hoursfireresistanceinaccordancetoASTME119-12andBS476part6and7classO)sandwitchedbetweentwoaluminiumsheets(each0.5mmthickofAA5005/AA3105grade)Thealuminiumcompositepanelcladdingsheetshallbecoilcoatedwithkynar500basedPVDF/Lumiflonbasedfluropolymerresin(having70:30ratioofPVDFandacrylic)coatingofapprovedcolourandsg=hadeontopfaceandpolymer(service)coatingofbottomfaceasspecifiedusingstainlesssteelscrews,nuts,bolts,washers,cleats,weathersiliconsealent,backerrodsetc.overallweightoftheACPshallnotbelessthan7.5Kilogram/ One Square Metre) SSR no 51.100

Providing and Fixing Processed Stone Cladding on wall surface/ plywood surface. RCC pardi/ Wall and all type of Interior, Exterior Compound wall and Gate etc. of cladding processed stone with material of Processed clay, Wooden chips, Silica sand, Cement, GFRC admixtures, Colour pigments, Fiber up to thick of 230 mm/ 25 mm including scaffolding, fixing of screw, etc. (As directed by Engineer in Charge) SSR no 51.192

GARDEN SOIL :- Supplying on site garden soil well sieved 90% to pass through I.S. sieve of 10mm size Free from stones rubbish like dried grass roots and other such materials. The soil should be fresh be measured by measuring box (Farma) Item includes royalty charges, octroi, corporation Tax Transporting, loading – unloading etc GDSR

FARM YARD MANURE: - Supplying on site well decayed, well dried, well powdered, without clods and free from stones, dried grass and other rubbish material. The color of the manure generally is black. The manure will be measured by measuring box. (Farma) Item includes Transporting, loading -unloading etc (.Lead charges per 50 km. considered.). GDSR

Preparing Instant Lawn : Supplying on site fresh Garden soil (free from stones rubbish like dried grass roots, other such materials) for excavation area of depth of 20 cms.( consolidated thickness).(As per P&G DSR 2022-23 Items of garden work,Sr No.38a)

Supplyings & planting of plants required for landscaping:-Bahva (Amaltash) Bakul . (height of plant 8-10 ft ) GDSR

Planting large flowering / shady trees :-Areca Palm should be well Developed,Good Branching ,healthy Condition,appropriate Size in Polybag,undamaged.7-8 FT GDSR

Supplying & erecting triple pole and neutral distribution board (TPNDB),SPMCB of 12 ways /phase (36 poles), with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB CSR 5.4.3

Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 10 ways (10 poles) for outgoing SP MCBs , with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB CSR 5.4.9

Supplying, erecting & marking SP MCB 6A to 32A, C-series with rated short circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB CSR 5.3.2

Supplying, erecting & marking FP MCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB CSR 5.3.13

Supplying, erecting & commissioning 2 pole RCCB 40A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no.SW-RCCB/RCCB CSR 5.6.2

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU CSR 7.2.16

LV Cables of following sizes to be laid buried in ground/ laid in cable trays in ready made trenches, cables shall be fitted on wall / ceiling by the means of saddle & spacers. Miscellaneous items such as cable dressing accessories like nylon tie, Aluminium clamps, GI cleats, cable tags etc. are included in the scope. Removal of empty drums, cartoons and making the site normal as instructed by Purchaser client is included in scope.Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU CSR 7.2.33

Cable end terminations for LV, XLPE/PVC insulated, PVC sheathed, armoured/ unarmoured cables including supply and fixing of single compression cable glands, stripping of cable insulation, supply and fixing of tinned plated copper lugs for copper cables for all phases and crimping the same to the conductor for the following cables. Miscellaneous items like cable lugs, G.I nut - bolts and G.I washers , consumables and other hardware materials as required to make the installation complete, are in the scope. All G.I Nut, bolt and washers shall be HDGI with 80 micron. One set of termination includes gland, lugs for cable core & accessoriesSupplying & erecting single compression type brass cable glands for 3 to 4 core 6 sq mm /2 to 4 core 10 sq mm for XLPE armoured cable as per specification No. CB-GL CSR 7.7.2

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 160 mm outside dia, double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. CSR 7.6.14

Supplying, fixing and commissioning 2 pole RCBO 32/40A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCCB/RCBO CSR 5.6.10

Point wiring for light/bell/exhaust fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW CSR 1.7.19

Secondary point wiring for additional light/ bell point, concealed type in min 20 mm FRLS grade PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires with required accessories as per specification No: WG-PW/CW CSR 1.7.22

Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete. CSR 1.6.1

Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete CSR 1.6.10

Supplying and erecting mains with 3x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW CSR 1.3.6

Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC. CSR 1.1.9

Supplying and erecting integrated LED street light fitting 60W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 6600 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2. CSR 2.4.5

Supplying and erecting Gate/garden light fitting with 200mm dia. glass bowl suitable for upto 12W LED Lamp on provided pipe as per specification No. FGODF/GLT CSR 2.5.1

Supplying and erecting LED square / circular Max. 11 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1200 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. CSR 2.1.3

Supplying and erecting Street light bracket for erection of Single fitting on tubular welded pole with 40 mm. dia 1.0 m. length “B” class G.I .pipe along with pole cap of 125mm dia 600 mm long duly welded as per specification no. FG-BKT/BPC CSR 2.7.7

Supplying and erecting Street light bracket for erection of Double fitting on tubular welded pole with 40 mm. dia 1.0 m. length “B” class G.I .pipe along with pole cap of 125mm dia 600 mm long duly welded as per specification no. FG-BKT/BPC CSR 2.7.8

Supplying and erecting GI wire of high purity of required sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/ conduit with screws complete. CSR 9.2.5

Supplying and erecting G.I. pipe pole ‘B’ class 80 mm dia 6 m long with pole cap, base plate in provided foundation as per specification no. OH-PL/GIP CSR 8.1.16

Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no.EA-EP CSR 9.1.1

N A CONSTRUCTION PVT. LTD.