Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.8 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹27.5 L+₹72,375 (2.70%)Rejected-Finance | L2 | Rejected-Finance Not being lowest | |
| 3 | L3₹28.5 L+₹1.7 L (6.45%)Rejected-Finance NEAR SATSANG GARACHARMA BASTI GARACHARMA PORT BLAIR 744 105 | PORT BLAIR | SOUTH ANDAMAN | ANDAMAN AND NICOBAR ISLANDS | 744105 | L3 | Rejected-Finance Not being lowest | |
| 4 | L4₹35.9 L+₹9.1 L (34.1%)Rejected-Finance OPP MARUTI SERVICE CENTRE SARACHARMA POST SRI VIJAYA PURAM 744 105 | SRI VIJAYA PURAM | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744105 | L4 | Rejected-Finance Not being lowest | |
| 5 | L5₹36.0 L+₹9.2 L (34.4%)Rejected-Finance | L5 | Rejected-Finance Not being lowest |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
9 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Minniebay
Junglighat PO Port Blair A and N Islands
PERIODICAL SERVICES TO BV YARD,IDSC,NCS,JAYANT PARK,ASHWINI NAGAR EME AND CERTAIN OTM ACCN UNDE AGE B/R I AT GE MINNIEBAY, PORT BLAIR
2022_MES_562603_1
8169/E8
Open Tender
Civil Works
Item Rate
270 days
GE Minniebay
Please refer Tender documents.
10 documents required · 10 mandatory
₹500
GE Minniebay
₹60,000
Yes
4 Jan 2023
12 Nov 2022
12 Dec 2022
12 Nov 2022
9 Dec 2022
26 Nov 2022
Amount
M&L for removing loose and broken concrete by chiseling/ mechanically etc from the roof slab, column, beam and similar structural members cutting edges, cleaning the dismantled portion with wire brush etc to make the reinforcement naked and remove dust, dirt and other foreign particle etc and washing with clean water with pressure and removing rubbish off the premises to a distance not exceeding 50 mtrs and including necessary safety precautions and scaffolding up to a height of 12m complete all as specified and as directed by Engineer- in- charge.
M&L for providing and applying rust remover to the exposed corroded reinforcement as per manufacturer's instruction including removing of concrete all around reinforcement by manual methods such as hammering the rebar, using wire brushes, salt paper, chiseling, etc (if left uncleared) including applying two coats of anticorrosive primer over dry steel surfaces after allowing due time for removal of rust complete as directed by Engineer-In-Charge. Note : The circumferential area around rusted bars along the length shall be measured and paid under this quoted item.
M &L for applying one coat epoxy bonding agent as per manufacturer's instructions to old concrete surfaces of RCC floors, columns, beams and similar structural members for bonding with new concrete complete all as specified and directed.
M&L for rendering the identified RCC surfaces with 15mm average thick cement mortar (1:3) on concrete surface by using POLYMER MODIFIED MORTAR in single layer of relevant proportion and weight of polymer, cement and filler material as per approved make, blended to a required consistency, applying, finishing and curing as per manufacturer's instructions including necessary scaffolding, formwork complete all as specified and as directed by Engr-in-Charge.
M&L for Reinforced cement concrete Nominal mix 1:1.5:3 Type A1, graded using 20mm size coarse aggregate as in columns, pillars, piers, posts and struts including necessary form work at any height of existing building complete all as specified and as directed by Engr-in-Charge.
M&L for Reinforced cement concrete Nominal mix 1:1.5:3 Type A1, graded using 20mm size coarse aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span including necessary form work complete at any height of existing building complete all as specified and as directed by Engr-in-Charge.
M&L for drilling 15mm dia holes in to RCC slab / wall / Column /beams to a depth of 100 to 150mm & provide shear connector of 12mm dia rod of length of 150mm bent to "L" shape with 75mm to be embedded in hole & 75mm to be used as dowel, fixed with polyester resin grout mixed mechanically and pour the same into the hole and insert the shear connector and finish the top; allow the same to set complete all as per manufacturer's instructions and as directed by Engineer-in-Charge.
M&L for injecting cementitous grout prepared by mixing dry powder and water in required consistency and filling under substrate of stanchion or grillages,machinery base plate etc of approximately 25 mm thick including temporary shuttering to edges with cement mortar 1:2 as per manufacturer's instructions and finishing the top surface even and fair with necessary curing complete all as specified and as directed by Engr-in-Charge
Note for item No 1 to 8:- (i) The work under item No 1 to 7 shall be carried out by authorised applicator as certified by manufacturer only (ii) Guarantee period of these items shall be 5 years from the certified date of completion (iii) An amount of 3% on the total value of these items in the form of FDR shall be submitted/retained during RAR and FB. This FDR/ amount shall be released only after successful completion of guarantee period.
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed by Engr-in-Charge
Taking down cement plaster on brick or concrete and racking out joints hacking for key sucrubing down with water etc complete all as specified and as directed by Engr-in-Charge.
M & L for rendering 5 mm thick in cement mortar 1:4 over a backing coat of 10mm thick in CM 1:6 (Total 15 mm thick) on concrete or block masonry surfaces including mixing water proofing compound on top layer as per manufacurers instructions and finishing the top surface even and fair complete all as specified and as directed by Engr-in-Charge. Note: Water proofing compound shall be measured and paid separately under relevant item of this schedule as "Supply only"
M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge..
M&L for rendering 5mm thick in CM (1:3) on ceiling surfaces finished even & smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.
M&L for rendering 5mm thick in CM (1:3) using water proofing compound on external ceiling surfaces of bldgs, finished even & smooth without using extra cement complete all as specified and as directed by Engr-in-Charge. Note: Water proofing compound shall be measured and paid separately under relevant item of this schedule as "Supply only"
Supply only integral water proofing compound (ISI) marked complete all as specified and as directed by Engr-in-Charge
Material and labour for preparation of newly pastered wall surface and applying two coats of oil bound distemper over a coat of primer over & including Plaster of Paris putty (of average thickness 2 mm) for obtaining even and smooth levelled surface complete all as specified and as directed by Engr-in-Charge.
Material and labour for complete removal of existing treatment on ceiling surfaces and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed by Engr-in-Charge.
Material and labour for preparation of new plastered ceiling surfaces and application of two coats of oil bound distemper over a coat of primer complete all as specified and as directed by Engr-in-Charge.
M & L for preparation of old distempered surfaces of ceiling and applying one coat of oil bound distemper complete all as specified and as directed by Engr-in-Charge
M & L for preparation of old distempered surfaces of walls and applying one coat of oil bound distemper complete all as specified and as directed by Engr-in-Charge.
M & L for preparation of old wooden surfaces exc 10cm width and girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge
M & L for preparation of old wooden surfaces exc 10cm width and girth and applying two coats of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge
M & L for preparation of old steel surfaces exc 10cm width and girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge
S&F in repairs 2mm thick aluminium sheeting alloy 31000 H4 in ridges,hips & valley gutter,drip,crumble joint and straight flashing (length and girth as fixed) complete all as specified and as directed by Engr-in-Charge.
Material and labour for complete removal of existing treatment on wall surfaces and preparation & application of two coats of oil bound distemper over a coat of primer complete all as specified and as directed by Engr-in-Charge.
Material and labour for preparation of newly plastered/old painted wall surface and applying Plaster of Paris putty (of thickness not less than 1 mm) for obtaining even and smooth levelled surface complete all as specified and as directed by Engr-in-Charge.
M & L for Preparation of new plastered wall surfaces and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm complete all as specified and as directed by Engr-in-Charge.
M & L for Preparation of old plastered wall surfaces and applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm complete all as specified and as directed by Engr-in-Charge.
M & L for complete removal of existing treatment on wall surfaces and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed by Engr-in-Charge.
M&L for making arrangement of scaffolding for any height of existing building in the shafts / spot/ location of weed growth having height more than 1.0 Mtr removing the weeds including its root and treating the area with glyphosate in required concentration, making good with CM 1:3 or PCC 1:2:4 type B1 (nominal mix) using 12.5mm graded stone aggregate making good including painting etc., complete all as specified and as directed by Engr-in-Charge
M&L for complete removal of old existing treatment/finishes on (G+3) bldgs providing necessary scaffolding & safety precautions and cleaning the surfaces free from any loose paint, dust,greases,growth of fungus,algae or moss using wire brush and levelling the surface even and smooth using mechanical sander and finally applying water by pressure jet washer of max pressure of 170 bar with automatic pressure relief system. The following process shall be initiated only after the above surface preparations :- (a) Filling the surface cracks using crack seal compound on required consistency using electric mixer. (b) Filling the dents and holes using wall care putty in appropriate ratio using electric mixer.(c) Applying one or two coats of damp proof primer (primer coat) using Airless spray technology with max working pressure of 22.8 Mpa/3300 psi and capable of operating single spray gun with a max material hose length of 30m.(d) Applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm Anti algal weather coat 100% acrylic smooth emulsion paint using Airless spray technology with max working pressure of 22.8 Mpa/3300 psi and capable of operating single spray gun with a max material hose length of 30m.
Note : (i) Work shall be executed only through authorised applicator duly approved by Manufacturer of Paint and certificate in this connection shall be submitted by the Contractor. (ii) The affected area of the wall due to dampness shall be ascertained by moisture meter of power input 9v Display 60 LEDs using colour code scale and Moisture measurement of each location shall be submitted along with RAR. (iii) The contractor shall upload MOU letter with any one of Paint manufacturer within 28 days of receipt of acceptance copy failing which contract shall be liable for cancellation. Authorised applicator shall have valid authorisation letter from the manufacturer The authorisation letter needs to be valid for the complete period of execution of the painting work. (iv) After preparation of the surface, Engr-in-Charge shall inspect and approve the same before applying primer and finishing coats. (v) Building wise stage passing register shall be maintained & submitted alongwith RAR/FB duly signed by Engr-in-Charge and contractor.
(vi) The equipments to be used in the work shall be certified by the manufacturer with whom the MOU been entered into.The specification and details of the equipments and tools pertaining to this item is denoted on Particular Specification.Manual method of paint application is not allowed and also Penalty shall be levied if appropriate tools & equipments pertaining to smart periodicals not used. (viii) Proper masking arrangement shall be carried before the application of primer or paint. (ix) The other coat of Primer and Paint shall be applied only after the completion of drying time and comply with recoating period as per manufacturer instructions. (x) Cost of scaffolding upto (G+3) height of building shall be included in the quoted rate.
EXCEL ENGINEERING WORKS
M/s Sriya Enterprises
M/s Ramesh Lal
ANITA VARMA ENTERPRISES
GAYATRI ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .