Repair and maintenance of wooden and steel, joinery, ventilator, Granite work, Tilling work alongwith certain B/R- Nature repair work in MD Accn at Piru vihar and certain OTM Accn in the area of AGE B/R-III under GE (West) Delhi Cantt-10

Amount

Note:- It is to be noted that all Items are to be executed in G+8 Storey Buildings. The bidders are required to quote their rates considering this fact. The cost of scoffolding , safety belt and cradle platform etc where necessary to be included in the unit rate. No extra payment will be made on this account.

Taking down chowkats or frames not exc. 1.5 sq. m with shutters (without taking off shutters from the frames) , complete all as specified and directed.

Taking down chowkats or frames exc. 1.5 sq. m but not exc 4 sqm each with shutters (without taking off shutters from the frames) , complete all as specified and directed.

Taking down shutters of any description exc 1 sq. m and not exc 2 sqm each, and refixing in same opening complete all as specified and directed.

S & F Steel windows with side hung shutters including box type hinges with steel handle 100mm long made of Z section, and steel peg stay and necessary holdfasts, each shutter to be provided with 02 Nos of MS tower bolts 100 mm complete with glazing bars, dovetailed or welded and making good to the opening of the window complete all as specified and directed.

All as per Ser No. 05 above, but without glazing bars and stay.

S&F powder coated anodised aluminium frame for windows, ventilators, grill with one or more rebates including necessary joining cleat, powder coated aluminium snap beading, screws for fixing etc. complete all as specified & directed. Note: (1) Only aluminium items to be measured. (2) Glass, wiremesh, handles to be measured & paid separately. (3) Minimum thickness of powder coating to be 50 micron.

S&F aluminium powder coated sliding window comprising of sliding runner of three way aluminium frame section (weight not less than 0.80 Kg/RM) as per series-A, consisting of three sliding shutters made out of section (weight not less than 0.55 Kg/RM) with 5.5mm thick glass and wiremesh (two No sliding glass shutters and 1 No wire mesh shutter) fixed with rubber and aluminium beading including down push type locking arrangement in shutter, fixed the frame with rawl plug complete all as specified and directed.(Note:- min thickness of powder coating not less than 50 micron.)

S&F in repair Vitreous china urinal partition white of size 310x700 mm.complete all as specified and directed.

S&F PVC Partition consisting of 12mm thick plain solid PVC ply sheet both sides reinforced with frame work made from 40mm x 20mm MS tubes. In between two MS tubes, 5mm thick Plain heat moulded 'C channel of size 75mmx50mm with feathered edges shall be fixed on the floor, wall and ceiling. Plastic ply opanel shall be inserted in the PVC 'C channel.The first & last MS tube should be errected such that it is inside a PVC 'C channel, in between adjoining plastic panel, 5mm thick x75mm width plain PVC sheet feathered at edges shall be stick on the front & back face using solvent cement complete.

S & F for mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, angle iron chowkhats; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0, complete all as specified and directed. .

S&F 35 mm thick 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats incl one shop coat of pink primer as speicifed and directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M S square tube supplying and fixing in opening as per specification & drawing. it shall be wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and directed.

S&F Factory Made Solid panel PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail and bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beadingand jointed together with solvent cement fixing in the frame at site as per specifications and drawing.it shall be laminated with wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900 ) used instead of exposed portion of PVC sheet beading.complete all as specified and directed..

S&F 100mm long aluminium butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, complete all as specified and directed.

S&F 125mm long aluminum anodised handle complete all as specified and directed.

S&F 150mm long aluminium anodised tower bolt complete all as specified and directed.

S & F stainless steel butt hinges 100mm long medium weight etc complete all as specified and directed.

S & F 200mm long aluminum, anodized barrel tower bolts of extruded section complete all as specified & directed.

S & F aluminum anodised handle 150 mm long cast type complete all as specified & directed.

S & F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified & directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples (for steel windows and gauzed doors) all as specified and directed

M&L for two coats of synthetic enamel paint over a coat of red oxide primer incl preparation of new steel surfaces of any description over 10cm girth or width complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of pink primer incl preparation of new wooden surfaces of any description over 10cm girth or width complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty all as specified and directed.

S&F floor door stopper 140 mm of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed in floor.

M&L for pressed steel frames of size 165x60mm for doors with one or more rebates incl necessary fixing lugs,hinges,lock strike plate,etc.complete as specified

M&L for pressed steel frames of size 125x60mm for doors with one or more rebates incl necessary fixing lugs,hinges,lock strike plate,etc.complete as specified

S&F of framed work as in doors or gates of angle or ther section with gusset plates, rails, grills, braces etc, complete drilled for fixed of Gde Fe-410 (Gde E-250) quality B etc complete all as specified and directed

S&F in repair 18/19mm thick medium density fiber board,interior grade,prelaminated one side for cupboard shutter/partition with knob and handle each shutter decorative choice lamination & other side balancing white lamination,fixed with screw to timber frame work complete all as specified and directed.

S&F in repair stainless steel curtain rod 25 mm dia with good finished,pair of suitable brackets,fennals and also making good the wall surface to match the existing surfaces complete all as specified and directed.

S&F 30mm thick flush shutters solid core construction with block board core and plywood face panels commercial type on both sides complete all as spcified and directed.

M&L for 20 mm thick granite (shade as approved of any type) work (table rubbed and polished) in window-cills, cooking platforms, sides of cooking platforms etc and like including 15mm thick screed bed in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, polishing & half rounding of edges, making hole for gas pipe incl demolition of stone slab/pcc if any complete all as spd & directed.

M&L for non skid colour ceramic tiles 7-8 mm thick (square/rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.18Sqm, in floors etc, set jointed in neat cement slurry & pointed in coloured cement to match and including 15mm thick screed bed in CM 1:6 complete all as spd & directed.

M&L for coloured printed glazed ceramic tiles of size 450X 300X 6-7mm/600X 300X 6-7mm on vertical surfaces such as dado/skirting, set and jointed in neat cement slurry and pointed in white/ coloured cement, laid over and including backing coat 15mm thick in cement mortar 1:4, complete all as specified.

M&L for cutting holes in brick walls built in cement mortar or cement lime mortar for inserting hold fasts depth of embeded portion of hold fast exc half brick but n.exc one brick and making good dismantled portion in Cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.

Demolition of cement concrete in ground floor and paving n.exc 15CM thickness (below or above ground level) complete all as specified and directed.

M&L for Plinth protection 75 mm thick in PCC 1:3:6 type C-1(using 20 mm graded crushed stone aggregate) laid in alternate bays(not exc 2 Sqm each) finished even and fair at top without using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 graded and three parts of sand by weight complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick laid over and including 20mm thick screed bed in cement mortar 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick as in riser in steps,skirting ,dado and pillar laid over and including15mm thick backing coat in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed.

S&F 2 mm thick Fibre glass reinforced translucent plain sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed.

M&L rendering 15mm thick ready mix mortar on fair faces of brick work or concrete surfaces of walls/ceiling and finished even and smooth without using extra cement including taking down old plaster of any description on walls complete all as specified.

M&L for preparation of new plastered surfaces on walls and applying two coats of cement base paint including one coat of alkali resistant primer complete all as specified.

M&L for preparation of new plastered surfaces on walls and applying two coats of oil bound distemper including 1mm thick wall care putty including one coat of alkali resistant primer complete all as specified.

Deduct Credit: for demolished/dismantled material of (-) Rs 259750.00 (Minus) as listed in Schedule 'A' Part II (Credit Schedule) Note: Tenderer's shall not quote against this item. The amount of Credit Schedule is tentative, however the same shall be considered to arrive at the contract sum.

M/S DSSP Construction Co.

M/S Ayub Khan

GLOBAL DEVELOPERS COMPANY

M/S SHRINARAYAN MEENA

Usha Contractors and Engineers

RK TRADERS

VIJAY KUMAR GUPTA

SHRI JI ENTERPRISES

ABHIMANYU LAMBA

K S CONSTRUCTIONS

B. S BUILDERS