Repair/replacement of certain rewiring/ Flame Proof rewiring/ building street light works and allied works at Mil Stn Suranussi under GE Kapurthala

Amount

Taking down carefully of any type of point wiring light, fans, socket or power complete fitting such as switch ceiling roses, pendent, regulator, sockets etc for taking schedule of credit and making good disturbed surface of wall, floor etc complete all as specified & directed by Engr-in-Charge.

M&L for surface point wiring complete with 2.5 Sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor 1100 V grade flameproof conforming to IS drawn through and including 20mm dia stove enamelled ERW MS conduit ISI marked and conduit accessories fixed on surface of wall/ceiling/floors etc. for flameproof application connected upto light fitting/fan with and 2.5 sq mm copper earth wire for earth continuity conductor and connecting to common earth dolly One light point controlled by one 16 Amps one way switch complete all as specified & directed by Engr-in-Charge.

M&L for surface point wiring complete with 4 Sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor 1100 V grade flameproof conforming to IS drawn through and including 25mm dia stove enamelled ERW MS conduit ISI marked and conduit accessories fixed on surface of wall/ceiling/floors etc.and 4 sqmm copper earth wire for earth continuity conductor and connecting to common earth dolly for 16 Amps socket independent board complete all as specified & directed by Engr-in-Charge.

S&F Flame proof rotary type switch with separate cable terminal box including rubber gasket as per IS 2149,SP 16 Amps ISI marked for ON/OFF light,made out of aluminium alloy LM-6 materal in high tensils steel with anticorrosive epoxy paint grey shede CMRI certified with cable entries including taking down old unserviceable switch complete all as specified & directed by Engr-in-Charge.

S&F Flame proof switch socket & plug combined with two pin and earth with plug top in sheet metal enclosure made out of aluminium alloy LM-6, 16 A epoxy painted CMRI certified suitable for AC 250 volts including taking down old unserviceable plug socket complete all as specified & directed by Engr-in-Charge.

M&L surface sub main wiring 2 runs of 6 Sqmm PVC insulated FRLS cable multistranded copper conductor 1100 V grade flameproof conforming to IS drawn through and including suitable dia stove enamelled ERW MS conduit ISI marked and conduit accessories fixed on wall/ ceiling/floors etc. for flameproof application connected upto DB and 4 sqmm copper earth wire for earth continuity conductor and connecting to common earth dolly including taking down old wiring complete all as specified & directed by Engr-in-Charge. Note :- 2 runs of 6 sqmm cable, 1 run of 4sqmm cable and one length of MS conduit shall be measured as one length.

S&F Flame proof and weatherproof LED light fitting including tube suitable for 1 x 16 watts, body made out of aluminium alloy LM-6 epoxy painted with wire guard, mirror optic relector, flameproof heat resistance glass all accessories prewired CMRI certified and hardware in high tensile with anti corrosive epoxy grey shade paint fixed to wall/ceiling with MS flat grouted in wall/ ceiling including LM-6 flameproof fexible conduit with wire from fitting to terminal point including taking down old unserviceable fitting complete all as specified & directed by Engr-in-Charge.

S&F Flame proof and weather proof LED light fitting including tube suitable for 2 x 16 watts, body made out of aluminium alloy LM-6 epoxy painted with wire guard, mirror optic relector, flameproof heat resistance glass all accessories prewired CMRI certified and hardware in high tensile with anti corrosive epoxy grey shade paint fixed to wall/ceiling with MS flat grouted in wall/ ceiling including LM-6 flameproof fexible conduit with wire from fitting to terminal point including taking down old unserviceable fitting complete all as specified & directed by Engr-in-Charge.

S&F Weather proof Flame proof junction boxes 100 mm dia 2/3/4 way suitable for ERW steel including taking down old unserviceable junction complete all as specified & directed by Engr-in-Charge.

S&F Flame proof and weather proof flame proof bulk head fitting of size 80W HPMV including bulb and accessories, body made out of aluminium alloy LM-6 epoxy painted with wire guard, mirror optic relector, flameproof heat resistance glass all accessories prewired CMRI certified and hardware in high tensile with anti corrosive epoxy grey shade paint fixed to wall/ceiling with MS flat grouted in wall/ ceiling including LM-6 flameproof fexible conduit with wire from fitting to terminal point including taking down old unserviceable fitting complete all as specified & directed by Engr-in-Charge.

M&L point wiring with 1.5 Sqmm PVC insulated and unsheathed multistranded FRLS copper conductor cable 1100 volts grade, single core, drawn through and including PVC casing and capping not less than 20mm size complete with all fittings and accessories, fixed to walls/ ceiling, including sunk cast type pressed steel terminal boxes 1.25mm thick with 3mm plastic laminated sheet (Hylem) top cover for mounting switches/ regulator etc including 1.5 Sqmm PVC insulated unsheathed multistranded (green colour) copper conductor cable 1100 volts grade, single core, earth continuity conductor connected to common earth dolly for one light point/ one fan point controlled by one one way switch complete all as specified & directed by Engr-in-Charge.

All as per serial item No.11 here-in-before but wiring with 2.5 Sqmm including 1.5 Sqmm PVC insulated unsheathed multistranded FRLS copper conductor cable 1100 volts grade, single core earth continuity conductor connected to common earth dolly for one 3/5 pin 15 amps switch socket out let on independent board complete all as specified & directed by Engr-in-Charge.

S&F in replacement of MCB SP 6 to 32 Amps 10KA ‘B’ curve 240 volts, complete all as specified & directed by Engr-in-Charge.

S&F in replacement MCB SPN 40 Amps 10 KA ‘B’ curve 240 volts complete all as specified & directed by Engr-in-Charge.

S&F in replacement of MCB TPN 63 Amps 10 KA ‘C’ curve 415 volts complete all as specified & directed by Engr-in-Charge.

S&F in replacement of sheet metal enclosures DB’s when MCBs to be used for 240 volts, 4 way SPN, double door with 200 Amps rated bus bar including earth and neutral link complete all as specified & directed by Engr-in-Charge.

S&F in replacement of sheet metal enclosures DB’s when MCBs to be used for 240 volts, 8 way SPN, double door with 200 Amps rated bus bar including earth and neutral link complete all as specified & directed by Engr-in-Charge.

S&F in replacement of sheet metal enclosures DB’s when MCBs to be used for 415 volts, 4 way TPN, vertical type, double door with 200 Amps rated bus bar including earth and neutral link complete all as specified & directed by Engr-in-Charge.

M&L in replacement for submain wiring with two runs of single 4 sqmm PVC insulated unsheathed multistranded 1100 vols grade with copper conductor drawn through and including in steel conduit medium grade ISI marked and its accessories including one run of single core 4 sqmm PVC insulated unsheated multistranded 1100 volts grade with copper conductor cable as earth contuinity conductor along with the wiring and connected from DB to DB/ main board complete all as specified & directed by Engr-in-Charge.

S&F in replacement of modular switch 6 amp 230 V AC one way, one module complete all as specified & directed by Engr-in-Charge.

S&F in replacement of modular switch 16 amp 230 V AC one way, with indicator one module complete all as specified & directed by Engr-in-Charge.

S&F in replacement of Modualr Socket 6A, 2/3 pin two module combined complete all as specified & directed by Engr-in-Charge.

S&Fin replacement of Modular socket, 6A/16A, 2/3 pin, two module complete all as specified & directed by Engr-in-Charge.

S&F in replacement of modular fan regulator step type, 120W, 2 module complete all as specified & directed by Engr-in-Charge.

S&F in replacement of white colour plates with frame for modular switch of 01 module complete all as specified & directed by Engr-in-Charge.

S&F in replacement of white colour plates with frame for modular switch of 03 module complete all as specified & directed by Engr-in-Charge.

S&F in replacement of white colour plates with frame for modular switch of 04 module complete all as specified & directed by Engr-in-Charge.

S&F in replacement of white colour plates with frame for modular switch of 06 module complete all as specified & directed by Engr-in-Charge.

S&F in replacement of white colour plates with frame for modular switch of 08 module complete all as specified & directed by Engr-in-Charge.

S&F in replacement of ceiling rose surface bakelite 65 x 50mm three terminals complete all as specified & directed by Engr-in-Charge.

S&F in replacement of switch piano flush type 5 Amp single pole one way complete all as specified & directed by Engr-in-Charge.

S&F in replacement of switch piano flush type 15 Amp single pole one way complete all as specified & directed by Engr-in-Charge.

S&F in replacement of switch piano 15 Amp flush type single pole two waycomplete all as specified & directed by Engr-in-Charge.

S&F in replacement of socket outlet 5 pin 5 Amps flush type multi purpose complete all as specified & directed by Engr-in-Charge.

S&F in replacement of socket outlet multipurpose 2 in one, 6 pin 15Amps flush type, complete all as specified & directed by Engr-in-Charge.

S&F in replacement of angular lamp holder insulated body with back plate suitable for pendent fittings complete all as specified & directed by Engr-in-Charge.

S&F in replacement of call bell single phase 240 volt complete all as specified & directed by Engr-in-Charge.

S&F in replacement of bell push flush type 5 Amps complete all as specified & directed by Engr-in-Charge.

Supply & fixing in replacement of fan regulator electronic step type and making connection complete all as specified & directed by Engr-in-Charge.

S&F in replacement of single pole and neutral enclosure with a two pin and earth plug and socket complete all as specified & directed by Engr-in-Charge.

Supply only in replacement of LED Lamp 5 watt complete all as specified & directed by Engr-in-Charge.

Supply only in replacement of LED Lamp 9 watt complete all as specified & directed by Engr-in-Charge.

Supply only in replacement of LED Lamp 12 watt complete all as specified & directed by Engr-in-Charge.

Supply only in replacement of LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & directed by Engr-in-Charge.

Supply only in replacement of LED tube light fitting 1 x 18 Watt, wall mounted LED batten with polycarbonate housing & integrated electronic driver LUMILINEBS18WLED865SPCWH, complete all as specified & directed by Engr-in-Charge.

Supply only in replacement of LED Tube light fitting new e-Lite LED Curve. high lumen batten with efficacy of 100 Lumens. Available in 10W LED 600 K LheXBXPnin1W010 complete all as specified & directed by Engr-in-Charge.

S&F in replacement of LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified & directed by Engr-in-Charge.

S&F in replacement of LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified & directed by Engr-in-Charge.

Supply only in replacement plug top 3 pin, 5 Amps, complete all as specified & directed by Engr-in-Charge.

Supply only in replacement plug top 3 pin, 15 Amps, complete all as specified & directed by Engr-in-Charge.

S&F in replacement of round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified & directed by Engr-in-Charge.

S&F in replacement of round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified & directed by Engr-in-Charge.

S&F in replacement of MCCB 100 Amp, 4 Pole, 16 KA 415 Volts, 50 Hz with adjustable thermal release fixed magnetic setting complete all as specified & directed by Engr-in-Charge.

Supply only in replacement of single core wire 2.5 Sqmm multi-strand PVC insulated copper conductor FRLS cable including connections of cable with MCBs or bus bars complete all as specified & directed by Engr-in-Charge.

Supply only in replacement of single core wire 1.5 Sqmm multi-strand PVC insulated copper conductor FRLS cable including connections of cable with MCBs or bus bars complete all as specified & directed by Engr-in-Charge.

Supply only in replacement of capacitor AC 230 volts 2.5 MFD complete all as specified & directed by Engr-in-Charge.

S&F in replacement of capacitor 4 mfd ISI marked complete all as specified & directed by Engr-in-Charge.

S&F in replacement of 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one 2 core 10 sqmm cable flat or circular complete all as specified & directed by Engr-in-Charge.

S&F in replacement of 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one 2 core 16 sqmm cable flat or circular complete all as specified & directed by Engr-in-Charge.

Supply only in replacement of LED Tube rod crystal glass double side 15 W, complete all as specified & directed by Engr-in-Charge.

Supply only in replacement of LED Tube rod crystal glass double side 18 W, complete all as specified & directed by Engr-in-Charge.

Supply only in replacement of LED Tube rod crystal glass double side 20 W, complete all as specified & directed by Engr-in-Charge.

Supply only in replacement of , Post Top,energy saving,environmental friendly,long life aesthetically designed with symmetrical light distribution,spun aluminium landscape luminaire with high power LEDs as light source CORAL (OPAL) - IP 65 CORALMINIPT15WLED757PSYMTOPC complete all as specified & directed by Engr-in-Charge.

Taking down high pressure SV/ MV/ MH lamp fitting of any capacity after dismantling from any height of pole/ walls/ any location and detecting the fault in the fitting by checking the accessories and wiring and rectifying the fault and refixing the same after repairs complete all as specified & directed by Engr-in-Charge.

S&F GI bracket suitable for street light fitting made out of 40mm dia GI tubing of light grade bent to shape of 1.5m length complete with necessary nuts bolts and MS clamps including taking out old one complete all as specified & directed by Engr-in-Charge.

M& L for fabrication for Cross arms, bracing, supports,clamps and black plates fabricated from structural steel sections including nuts,bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any size or shape as indicated or directed by Engr In Charge and inclusive of one primer coat epoxy and a coat of epoxy complete all as specified & directed by Engr-in-Charge.

Supply and fix HOT moulded (FRP) juction boxfor street light pole with locking arrengement with IP -65 protection of size 280 x 200 with 32 Amp 4 way heavy duty terminal block with 10 Amp MCB SP and two steel bracket to fix with pole complete all as specified & directed by Engr-in-Charge.

Supply, fix, connect and test in replacement , LED street light fitting 35 Watts (or above watt) IP 65/66 with PDC Aluminium body and toughened glass visor fitted in frame, separate driver compartment provided, secondary optical lens for superior light distribution efficiency >95 Lm/W, CCT5700K IP65, input voltage from 120-270 V power factor above 0.95 complete fitting including all accessories Note : Contractor shall provide 1 years written manufactures warranty for the LED fixture complete including driver from the certified date of completion. Make : Polycab Cat Part No PCGLS 01 30 Product code PUB0502004 and C&S electric Cat part No LTESS 12 X 2.5 HPLED/LS Product Code INDUS/30W/LS (Model Indus series) or equivalent in makes indicated in Appendix 'B' of Particular Specifications complete all as specified & directed by Engr-in-Charge.

Material and Labour in replacement for earthing complete with copper earth plate electrode 600mm x 600mm x 3.15 mm thick buried directly in ground earth pit not less than 2.25 mtr below normal GL with the top edge of the plate not less then 1.5 mtr below the normal GL connected to 20X3mm copper strip as earth lead by means of bolts, nuts, check nuts and washer of brass and protected by 40 mm GI pipe (light grade) and watering pipe 20mm bore GI pipe (light grade) including GI wire meshed funnel and chamber PCC (1:4:8) type D2 using 40mm grade stone aggregate, coping shall be (1:3:6) type CI using 20mm stone aggregate with RCC 1:2:4 type B1 (using 20mm graded stone aggregate) pit cover re-inforced with 8mm dia at 80mm c/c both way in lieu of CI pit cover with angle iron frame, including excavation and earth work in any type of soil and removal of surplus soil of earth complete all as shown in electrical plate of SSR Part I and as specified including charcoal dust, common salt complete and earth lead connected to earthing test point all as specified and testing of earthing on completion complete all as specified & directed by Engr-in-Charge. NOTE 1. The unit rate includes for protection pipe and copper strip 20X3mm from top of earth plate up to 7.5 meter above ground level.

Material and Labour in replacement earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required aluminium strip 25x3 mm complete all as specified & directed by Engr-in-Charge.

Supply and fix in replacement, earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required galvanised iron strip 32x6 mm complete all as specified & directed by Engr-in-Charge.

Supply and fix in replacement, earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required copper strip 20x3 mm complete all as specified & directed by Engr-in-Charge.

Supply and fix in replacement, air termination, single pointed aluminium rod 12mm dia and 300mm long complete all as specified & directed by Engr-in-Charge.

Supply and fix in replacement, test point terminal block made out of gun metal or phosphorous bronze of size 75x75x25mm drilled and screwed including 3 Nos 8mm dia 25 cm hexagonal head screw complete all as specified & directed by Engr-in-Charge.

Supply and fixing in replacement 50 mm bore galvanized steel tubing, light grade fixed to poles/Walls etc, for holding Air termination with coupling, complete complete all as specified & directed by Engr-in-Charge.

Material and labour for plain cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregates as in foundation of stays and including necessary form work of poles etc complete all as specified & directed by Engr-in-Charge.

Supply, Installation and testing of Desert Cooler electric driven (Single phase) as per followoing specification.Size of Desert Cooler - L x b x h 660 x 660 x 825 mm (26" x 26" x 32.5") Approx, Body: (i) steel body Top cover and pillars of 20 SWG (1.00 mm) thick GI Sheet (iii) Side panels of 22 SWG (0.8 mm) GI Sheet (iiii) Tank Height7" made of 20 SWG (1.00 mm) GI Sheet (iv) Front grill and Directional grill of GI Sheets, Fan Motor : (i) Fan motor should be copper winding, 500 mm Sweep Cooler fan, three speed (High/Medium/Low) with methalic blade duly painted with Snthetic anti corrosive oven cured paint fitted to body Fan motor /GEC (ii) Input Cap 200 watt(approx), Speed 1400 RPM, 230 Volts, 50 Hz, Air Delivery 5000 Cum/Hrs, Submersible Pump Motor: Input Cap 40 watt (Approx), Speed 1300 RPM, 230 volts, 50 Hz.

Supply and fix in replacement; blower motor 1/8 HP, single phase suitable for desert cooler including testing, complete all as specified & directed by Engr-in-Charge.

Material and labour for taking down existing unserviceable fan motor from desert cooler and including replacement of wornout winding, bushes and bearing etc refixing, connecting and testing complete all as specified & directed by Engr-in-Charge.

Supply and fix in replacement of water lifting submersible pump suitable for desert cooler as per existing capacity complete all as specified & directed by Engr-in-Charge.

Supply and fix PVC pipe 15mm dia suitable for desert coolers including taking out unserviceable PVC pipe complete all as specified & directed by Engr-in-Charge.

Supply and fix cooler pad made of Khas-Khas suitable for desert coolers including taking out unserviceable pads complete all as specified & directed by Engr-in-Charge.

Supply and fix starting capacitor 40 MFD 230 Volts including taking out unserviceable capacitor, including testing complete all as specified & directed by Engr-in-Charge.

Supply and fix in replacement; Fan blade of desert cooler heavy duty HDPE suitable for 4000/5000 CFT cap complete all as specified & directed by Engr-in-Charge.

Supply and fix in replacement; copper conductor cable 40/0.0076 Sqmm 3 core not less than 3 mtrs long with plug top 5 Amp suitable for desert cooler complete all as specified & directed by Engr-in-Charge.

Supply and fix in replacement; new compressor for water cooler of capacity 40/80 Ltr, deep freezer capacity 200 to 300 Ltr including disconnecting, opening up, taking out burnt compressor by cutting/opening the pipe connections, fixing in position, reassembling, testing and commissioning including gas & oil charging after ensuring entire system leak proof complete all as specified & directed by Engr-in-Charge.

Supply and fix in replacement; new compressor for water cooler of capacity 60/120 Ltr, including disconnecting, opening up, taking out burnt compressor by cutting/opening the pipe connections, fixing in position, reassembling, testing and commissioning including gas & oil charging after ensuring entire system leak proof complete all as specified & directed by Engr-in-Charge.

Supply and fix in replacement; blower motor 1/35 HP with base and clamp, rubber mountings for water coolers including taking out the old unserviceable motor complete all as specified & directed by Engr-in-Charge.

Material and labour for rewinding of blower motor of water cooler 40/80 litres capacity any make with super enamelled copper wire including replacement of wornout bushes etc and testing complete all as specified & directed by Engr-in-Charge.

Material and labour for trickle charging of gas F-12 or as required in water cooler, any capacity, after detection of leakage with soap solution/halide torch ,making the system leak proof by brazing/ soldering the leakage point, flushing out the moisture contents trapped in the pipe line by charging CO2 gas and maintaining the pressure for prescribed period complete all as specified & directed by Engr-in-Charge.

Supply and fix in replacement; push type water tap, 15 mm dia, chromium plated suitable for water cooler complete all as specified & directed by Engr-in-Charge.

Supply and fix in replacement, thermostat switch suitable for water cooler, any capacity/make including taking down unserviceable thermostat switch complete all as specified & directed by Engr-in-Charge.

Supply and fix in replacement; capillary filter drier 2 way suitable for water cooler including taking out old unserviceable capillary filter complete all as specified & directed by Engr-in-Charge.

Material and labour for rewinding of blower of Deep freezer hard top 200 litres capacity having single door any make with super enamelled copper wire including of wornout bushes etc and testing complete all as specified & directed by Engr-in-Charge.

Supply and fix in replacement; new compressor for refrigerator of capacity 286/310 Ltr including disconnecting, opening up, taking out burnt compressor by cutting/opening the pipe connections, fixing in position, reassembling, testing and commissioning including gas & oil charging after ensuring entire system leak proof complete all as specified & directed by Engr-in-Charge.

Material and labour for trickle charging of gas F-12 or as required in refrigerator of capacity 286/310 Ltr, after detection of leakage with soap solution/halide torch ,making the system leak proof by brazing/ soldering the leakage point, flushing out the moisture contents trapped in the pipe line by charging CO2 gas and maintaining the pressure for prescribed period complete all as specified & directed by Engr-in-Charge.

Supply and fix in replacement; thermostat switch for refrigerator of different capacity/make including taking out old unserviceable thermostat switch complete all as specified & directed by Engr-in-Charge.

Supply and fix in replacement; capillary tube made of copper, any size suitable for Refrigerator/Water Cooler including taking out old unserviceable capillary tube complete all as specified & directed by Engr-in-Charge.

AGGARWAL ENGINEERING CO