The Safety Engineering Works at Various Maternity Homes and Speciality Hospitals in Western Suburbs of BMC.

Amount

Main Fire Pump-Supplying and installing, testing, perfect aligning and proper leveling and commissioning of fire service main pump, of 2820 LPM (Litres/min.) at 88m centrifugal type pump

Jockey Pump-SITC of Jockey Pump of 240 LPM at 88m head

Booster Pump-SITC of Booster Pump of 450 LPM at 88 m head

G.I. Pipes: Providing and fixing in position G.I. Heavy grade 'C' class pipes (I.S. 1239 part I) with necessary clamping to wall beams and ceilings with hangers and clamps anchor fasteners wherever required to firmly support piping-Providing and fixing in position G.I. Heavy grade 'C' class pipes150 mm

G.I. Pipes: Providing and fixing in position G.I. Heavy grade 'C' class pipes (I.S. 1239 part I) with necessary clamping to wall beams and ceilings with hangers and clamps anchor fasteners wherever required to firmly support piping-Providing and fixing in position G.I. Heavy grade 'C' class pipes100 mm

G.I. Pipes: Providing and fixing in position G.I. Heavy grade 'C' class pipes (I.S. 1239 part I) with necessary clamping to wall beams and ceilings with hangers and clamps anchor fasteners wherever required to firmly support piping-Providing and fixing in position G.I. Heavy grade 'C' class pipes 80 mm

G.I. Pipes: Providing and fixing in position G.I. Heavy grade 'C' class pipes (I.S. 1239 part I) with necessary clamping to wall beams and ceilings with hangers and clamps anchor fasteners wherever required to firmly support piping-Providing and fixing in position G.I. Heavy grade 'C' class pipes 65 mm

G.I. Pipes: Providing and fixing in position G.I. Heavy grade 'C' class pipes (I.S. 1239 part I) with necessary clamping to wall beams and ceilings with hangers and clamps anchor fasteners wherever required to firmly support piping-Providing and fixing in position G.I. Heavy grade 'C' class pipes 50 mm

G.I. Pipes: Providing and fixing in position G.I. Heavy grade 'C' class pipes (I.S. 1239 part I) with necessary clamping to wall beams and ceilings with hangers and clamps anchor fasteners wherever required to firmly support piping-Providing and fixing in position G.I. Heavy grade 'C' class pipes 25 mm

PAINTING OF POLES-Painting of 7 mtr G.I./M.S. Pole (All types).

WAFER TYPE BUTTERFLY VALVES:WAFER TYPE BUTTERFLY VALVES: -150 mm dia.

WAFER TYPE BUTTERFLY VALVES:WAFER TYPE BUTTERFLY VALVES: -100 mm dia.

WAFER TYPE BUTTERFLY VALVES:WAFER TYPE BUTTERFLY VALVES: -80 mm dia.

Non Return Valves (NRV): Supplying and installing double flange NRV-Supplying and installing double flange NRV 150 mm

Non Return Valves (NRV): Supplying and installing double flange NRV-Supplying and installing double flange NRV 100 mm

Non Return Valves (NRV): Supplying and installing double flange NRV-Supplying and installing double flange NRV 80 mm

Pressure Gauge-Supplying and installing pressure gauge of 100 mm Ø., 0-300 PSI or 0- 14 kg per cm square fitted with 12/15 mm Ø. pad cock valve, and G.I. pipe, elbow etc

Supplying and installing pressure switch with 12/15 mm Ø isolation valve, G.I. nipple, elbow etc. in an approved manner as per specification

1 st category Cu armoured cables FRLS outer sheathed- 3.5C x 95 Sq.mm

Cable End Termination For Aluminium Cables – 3.5C x 95 Sq.mm

Supply & installation of Earth conductor of the following sizes to be cleated on wall / columns with nuts & bolts or laid in cable tray / buried in ground including cutting, drilling, tapping, jointing by welding, connecting to equipments, painting to welded portion by black bitumen paint and with all necesary GI hardware & accessories to complete the work-Earthing Continuity Conductors -50 x 6mm GI

1.1 kV grade stranded Cu conductor, XLPE insulated, extruded PVC inner and outer sheathed FRLSHZ, galvanised steel round or strip armoured cables (SP-ME-TS- 6)-2nd category Cu armoured cables FRLSZ outer sheathed- 2C x 1.5 Sq.mm

SUPPLY & INSTALLATION OF ANGLE IRON FRAME WORK (TS-7)-50 x 50 x 6 mm of M.S.angle.

Providing & Fixing gunmetal breaching head as per IS:904 specification tested for 20 kg/cm. with 63 mm Dia 4 nos. instantaneous type inlet and 150 mm dia flanges outlet with built in non-return valve for fire brigade connection to fire risers including companion flanges of Table E withnuts, bolts & washers etc.

Supplying & installing moulded HDP / Fibre water tank. for -ve suction only, having capacity 1000 ltrs.fitted with necessary accessories complete as per specification

Supplying and erecting 20/25mm Ø G.M.air release cock, with necessary G.I. coupling to be fitted on top of Air vessel or on wet riser as per specification

Supplying and installing Air Vessel of 300 mm Ø 1.5m in height M.S. tank installed inside pump house as per specification

Hydrant Valves (HV)-Supplying and installing gun metal single outlet hydrant valve fitted with necessary accessories

Nozzles (NZ)-Supplying Stainless Steel branch Pipe 63 mmØ fitted with 20 mm dia detachable hexagonalnozzle as per specifications

Hose-Providing and fixing in position 2 lengths of 15 M long flexible canvas rubber lined hose reels 63 dia with adapter, branch pipe and nozzle and storing them in metal cabinets with lockable glass shutters and fixing the metal cabinet at ground level in a location where it can be easily spotted including painting etc

MS/CRCA Boxes (BOX)-Supplying and erecting M.S./CRCA cabinet for housing single hydrant valve (size 400 x 400 x 400mm.) made from 16 SWG sheet and angle iron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8"x6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour

Supplying and installing fire brigade Header (Siamese Connection) of 150 mm Ø for supplying water to wet riser system as per specification

Providing coating of Bitumen paint for underground rising main-Providing coating of Bitumen Paint & 4mm thick Wrapping as per IS 10221 for underground 100 mm Ring Main of Fire Fighting System.

Excavating the trenches and refilling,reinstatement of the same after the cable is laid in approved manner (750 mm deep, 600 mm wide),in all types of soils 1 Cu. Mtr. = 2.2 mtr

Supplying and installing wall mounting swinging Hose reel drum fitted with 19 mm dia. 30m high pressure polypropylene (Polyhose) long fitted with necessary accessories complete as per specification

MISCELLENEOUS-Cement concrete foundation using M-20 cement concrete mix with J shaped foundation bolts where required

Supply & Laying of double wall corrugated ( DWC) pipes of HDPE for underground cable protection as per IS 14930 Part II. With necessary connecting socket/couplings, tees of some material at required depth up to 900 mm below road ground surface. backfilling of with light ramming is included in the scope-Supply & Laying of double wall corrugated ( DWC) pipe 120 mm OD / 103.5 mm I.D.

Excavating the trenches and refilling the same after the cable is laid in approved manner (Size of trench: 750 mm deep, 600 mm wide) in concrete/ masonary / asphalt. 1 Cu. Mtr. = 2.2 RMT. And reinstatement.

Providing, detailing, composite fabricating members like Trusses, N-girders, girders, bracings, supports, purlins, runners, and similar structural steel members fabricated using M.S. hollow tubular steel sections (circular & rectangular pipes), of TATA Structura Make or equivalent conforming to IS 1239 part 1 and 2 and of grade Fe 250 as per specifications and approved fabrication drawings (which are to be prepared by Contractor and got approved from Engineer), including transportion of the same to site, erection of structural steel members for all heights & at all levels, provision of necessary erection bolts, fixing bolts, nuts, washers, cleats, stiffeners, gussets, base plate, and all necessary operations like preheating as per specifications, straightening, bending, cutting, drilling, grinding, machining if specified, welding, grinding, removing the welding burr and preparing surface for painting with wire brush cleaning and applying two coats of epoxy red oxide zinc phosphate primer of 30 microns each and two coats of Epoxy Corrosion Resistant Enamel paint of 30 microns after fabrication including touching up with spray painting after erection etc complete as directed by Engineer In Charge.

Providing and fixing single skin trapezoidal profiled sheeting 930 - 1020mm cover width 28-32 mm crests depth at 186-250 c/c ( above 195 mm c/c crest distance there will be minimum 2 ribs at the centre for stiffening). The feed material shall be manufactured from AZ 150 (min. 150 gms/sq.mt total on both sides) Zincalume / Galvalume sheets of minimum yield strength of 550 MPa, 0.45 mm BMT, ( 0.5 mm TCT excluding paint coating thickness), metallic hot dip coated with Al?Zn alloy (55% Aluminium, 43.5% Zinc, 1.5% Si ) as per AS 1397 / IS15961 & painted with Super Durable Polyester Colorbond steel XRW or equivalent quality paint system of apporved color, suitable for exterior application conforming to AS/NZS 2728:2007 type-4 / IS15965:class3 of approved make. The sheet shall have a total coating thickness of 35 microns, super durable polyester paint system of 20 microns on exposed surface and 5 micron reverse polyester coat on back surface over 5 micron primer coat on both surfaces. The paint system shall have stable inorganic pigments for color durability. The product will be fastened using no.12-14x55 mm (or as per design requirement ), mechanically coated with 25 micron Zn-Sn alloy or hot dipped zinc coated with min 40 micron hex self-drilling fasteners with EPDM washer of approved make confirms to AS3566:2002 class 3-Bare Galvalume/zincalume sheets for roofing

Earthing (SP-ME-TS-37)-Earthing station with 600 mm x 600 mm x 6 mm galvanised iron plate & 50 mm dia. G.I. pipe, 3000mm long GI pipe (Class B or better) earth pit as per IS 3043. The earth pit shall be provided with watering pipe (Class B) with wire messed funnel, 25x3 GI strip/ / 2X8SWG G.I. wire up to chamber (wire or strip size as per fault level), disconnecting links with 600 x 600 mm (clear) RCC chamber & heavy duty 3mm thick CI chequered plate cover with hinge & stainless steel bolts. Bentonite/ Charcol & Salt shall be provided for earth pits. Excavation, back filling, removal of excess soil is included in the scope

Supply & installation of Earth conductor of the following sizes to be cleated on wall / columns with nuts & bolts or laid in cable tray / buried in ground including cutting, drilling, tapping, jointing by welding, connecting to equipments, painting to welded portion by black bitumen paint and with all necesary GI hardware & accessories to complete the work-Earthing Continuity Conductors -25 x 6mm Tinned copper

Supply & installation of Earth conductor of the following sizes to be cleated on wall / columns with nuts & bolts or laid in cable tray / buried in ground including cutting, drilling, tapping, jointing by welding, connecting to equipments, painting to welded portion by black bitumen paint and with all necesary GI hardware & accessories to complete the work-Earthing Continuity Conductors – Bare Copper Conductor size 12 SWG

Cable end terminations for LV, XLPE/PVC insulated, PVC sheathed, armoured/ unarmoured cables including supply and fixing of Double compression cable glands, stripping of cable insulation, supply and fixing of tinned plated copper lugs for copper cables for all phases and crimping the same to the conductor for the following cables. Miscellaneous items like cable lugs, G.I nut - bolts and G.I washers , consumables and other hardware materials as required to make the installation complete, are in the scope. All G.I Nut, bolt and washers shall be HDGI with 80 micron. One set of termination includes gland, lugs for cable core & accessories-Cable End Termination For Copper Cables – 2C x 1.5 / 2.5 Sq.mm

WAFER TYPE BUTTERFLY VALVES:WAFER TYPE BUTTERFLY VALVES: -50 mm dia.

G.I. Pipes: Providing and fixing in position G.I. Heavy grade 'C' class pipes (I.S. 1239 part I) with necessary clamping to wall beams and ceilings with hangers and clamps anchor fasteners wherever required to firmly support piping-Providing and fixing in position G.I. Heavy grade 'C' class pipes 40 mm

G.I. Pipes: Providing and fixing in position G.I. Heavy grade 'C' class pipes (I.S. 1239 part I) with necessary clamping to wall beams and ceilings with hangers and clamps anchor fasteners wherever required to firmly support piping,-Providing and fixing in position G.I. Heavy grade 'C' class pipes 32 mm

Providing and applying first single coat of approved primer and two coats of synthetic enamel paint/flat oil paint of an approved make and colour as per manufacturers specifications to the W.I / G.I. or M.S. pipes of electric, gas or roof rain water down takes and fittings etc. as specified below, at all height and locations as directed including scaffolding, scraping, cleaning old paint and preparing surfaces for painting by any approved means etc. complete as directed by Engineer-in-charge.-For pipe more than 100mm dia. and upto 150mm

Hydrant Valves (HV)-Supplying and installing gun metal Double outlet hydrant valve fitted with necessary accessories

Sprinkler-Supplying & erecting vane type water flow detector suitable for detecting flow of water in wet sprinkler pipe of main line or branch lines of 100 mm dia having following features 1) Visual Switch Activation 2) Rugged Switch Assembly 3) Heavy Duty Alluminium pipe Saddles 4) Durable Metal Encloser 5) Steel U Bolts For Secure Mounting 6) Two SPDT ( Single Pole Double Track ) Synchronised Switches 7) Serviceable Without Draining Pipes

Providing and fixing 15mm gunmetal sprinkler head with quartzoid bulband set to operate at specified temperature pendent/ upright/ side wallas per the location indicated on the drawings. sprinklers 68 degree C FOC/UL/FM approved complete with socket nipple, adaptoretc. Sprinkler shall be pendant type. Temperature of operation 68 deg.C A. Side wall type in brass chrome finish

Sprinkler-Providng and fixing in position sprinkler guards to protect open sprinkler in basement from mechanical damage.

Providing & fixing of Stainless steel corrugated flexible pipe (hose) for dropping sprinklers below false ceiling, pipe shall be 16 bar pressure rating and 1000 mm long 25 mm dia with union / reducer collar, clamps etc. as required.

Providing and fixing 150mm installation control valve assembly with turbine type automatic alarm to be connected with control valve, drainvalve, test valve and piping as per manufacturer’s specifications complete in all respects.

Clean Agent Fire Extinguisher

CSMC for after completing DLP period of 1st year

CSMC for after completing DLP period of 2nd year

CSMC for after completing DLP period of 3rd year

AJANTA INNOVATIVE SOLUTIONS LLP

MAK ENTERPRISES