Renovation and repair of work in Building of Distt. Industries Center Sirsa

Amount

Earth work in excavation in foundations, trenches, etc. in all kinds of soils, not exceeding 2 meters depth including dressing of bottom and sides of trenches, stacking the excavated soil, clear from the edge of excavation and subsequent filling around masonry, in 15 cm layers with compaction, including disposal of all surplus soil, as directed within a lead of 30 meters. ( HSR 6.6)

Removing door and windows (wood and steel) with chowkats by making recesses in walls when the wall is not to be dismatlled (HSR 8.18) a) Door

b) Window

Dismantling cement conglometate/terrazzo floors 25mm to 50mm thick without concrete base. (HSR. 8.26)

Scraping of white wash and colour wash cement plaster. (HSR.8.32 (a)

Scraping of tiles 30.48 X 15.24 X 5.08 cm dismantlled from tile work in lime or cement (HSR 8.32 g)

Cement concrete 1:8:16 with brick ballast 40mm nominal size in foundation and plinth (HSR. 10.26)

Damp proof course 25 mm thick of cement concrete 1:2:4 using stone aggregate 20mm nominal size with 2 coats of bitumen 20/30 penetration, at 1.65 Kg per sqm laid hot and sanded HSR 10.115 Note (without bitumen coat)

First class brick work laid in cement sand mortar 1:4 in foundation and plinth. (HSR 11.4)

First class brickwork laid in cement sand mortar 1:4 in first storey upto 4 meters above plinth level. (HSR 11.9)

Conglomorate floor 40mm thick cement concrete topping 1:2:4 (HSR 14.9)

Terracing consisting of tiles 22.86 cm x 11.43 cm x 3.81 cm laid over 87.50 mm mud filling on a layer of 25mm mud palster and another layer of mud mortar for laying the tiles, including two coats of bitumen laid hot at 1.65 Kg. per sqm. on top of R.C.C. slab including grouting with cement sand mortar 1:3 ad top surface to be left clean etc. (Ch. 13.13)

Providing and fixing vitrified tiles of size 600x600mm of approved make in flooring laid in any pattern as specified over base of 20mm thick cement coarse sand morter 1.3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. Note: tiles shall be of premium quality (First quality) of reputed manufacturar like NITCO, KAJARIA, SOMANI, ORIENT, JOHNSONS & RAK. (HSR No. 14.89)

Providing & Fixing vitrified tiles of size 600mmx600mm of approved make in skirting or Dado in any pattern as specified over base of 12 mm thick cement coarse sand morter 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tiles. Note:- tile shall be of premium quality( 1st quality) of reputed manufacturar like NITCO, KAJARIA,SOMANI, ORIENT, JOHNSONS & RAK.( HSR.14.90)

Providing and fixing ceramic tiles/anti skid tiles of size 400mmx400mm or above size approved make in flooring, laid in any pattern as specified over base of 20mm thick cement coarse sand morter 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tiles. Note:- tile shall be of premium quality( 1st quality) of reputed manufacturer like NITCO, KAJARIA,SOMANI, ORIENT&JOHNSONS.(HSR.14.91)

12mm thick cement plaster 1:4 (HSR. 15.5)

15mm thick cement plaster 1:6 on the rough side of single or half brick wall. (Ch. 15.12)

Cement pointing 1:2 flush on brick and tile walls (HSR.15.62)

Applying pink primer or aluminium priming ocat on wood work including preparation of surface, Knotting and stopping etc. (HSR 16.2)

Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or matallic or plastered or concrete surfaces to give an even shade. (HSR 16.3)

Preparation of plastered or concrete surfaces for painting, including sand papering the surface, applying one coat of linseed oil and filling with approved quality filler, consisting of white lead, linseed oil, varnish and chalk mitti including finishing surface to the required finish, complete. (HSR 16.24)

Providing and Applying priming coat with cement primer in all shades on newely plastered or concrete exterior surface. (Note: First quality paint/primer or reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge). (HSR 16.25).

Preparation of plastered surfaces for oil bound distemper including sand papering the surface, applying one coat of linseed oil and filling with approved quality filler, consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to the required finish complete (HSR. 16.52)

Distempering with washable oil bound distemper (of approved manufacture) two coats over one priming coat on new work. (HSR 16.58)

Providing two coats of exterior acrylic emulsion paint. (b) 1st quality (HSR. 16.79-b)

Chowkhats of commercial hardwood such as hollock champ, chikrassy and chaplash etc. (non confirious timber other than teak confirming to ISI specification no. 1003 kiln seasoned) of doors and windows including iron hold fasts corners streps , screws bolts for hold fasts etc. complete fixed in position. (HSR 17.12)

Cupboard shtters of commercial hard wood such as hollock,champ, chikrassy and chaplash, etc. (Non coniferous timber other than teak conforming to I.S. specification no. 1003, kiln seasoned) excluding chowkat but with commercial plywood panels or faced on one side including iron hinges and screws fixed in posiion (excluding the cost of handles, tower bolts, hasp with stample, but including the labour for fixing the same-(b) 25 mm thick (Ch. 17.32 (b)

Providing and fixing 12 mm thick and 150 mm wide pelmet, with 25 mm diameter wooden curtain rod and brackets, including fixing with 25 mm X 3 mm M.S. flat 10 cm long and plugs (Teak),etc., complete (HSR 17.59-D)

Cost of aluminium fittings complete for doors and windows, such as tower bolts, handles, etc. and screws for these fittings ( excluding sliding bolt) a) for single leaf shutters(HSR 17.72 a)

Providing and fixing sliding bolt with nuts and screws, etc., complete aluminium (ii) size 250 mm x 16 mm (Ch. 17.83 (b-II)

Factory manufactured panelled door or glazed window, shutters of commercial hard wood, such as hollock, champ,chikrassy and haplash,etc.,(non-coniferous timber other than teak,conforming to I.S.specification No.1003,kiln-seasoned),with 100 mm wide verticle styles, 150 mm wide lock rail, 200 mm wide bottom rail and 100 mm wide other rails, with panels of 15 mm thick, tongued and grooved of commercial hard wood and including cost of iron hinges,screws,chocks/cleats,stops,nails etc., complete,fixed in position (excluding the cost of any fittings,other than specified above,but including labour for fixing the same in position). (HSR 17.90-B) 35 MM. (-) Note I under 17.18 shutters

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE (to the approval of the Engineer-in-charge). INDIAN TYPE ORISSA OR ORYA WATER CLOSET SUITE for sinking into floor, with raised foot treads COMPLETE WITH 100 MM H.C.I.’P’ TRAP with or without vent as required and all OTHER NECESSARY FITTINGS as fully described in item no.30.1 above. (c) size 680 mm (iii) Mixed Colour (HSR 30.2-C-iii)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE A RANGE OF FOUR URINALS FLAT BACK OR ANGULAR LIPPED IN VITREOUS CHINA-WARE WITH TWO NO.5 LITRES CAPACITY best Indian make C.I. automatic flushing CISTERN WITH FITTINGS AND FLUSH PIPE ETC., COMPLETE AS FULLY DESCRIBED IN ITEM NO.30.19 ABOVE.465 MM HIGH(III) MIXED COLOUR (HSR 30.22-iii)

Providing and fixing in position best Indian make lavatory suites (with full anti splash rim in vitreous chinaware and all other necessary fittings as fully decribed in item No. 30.41 above. Size 690 mm x 550 mm with one no. tap (HSR 30.42-Mixed Colour-vi

Providing and fixing in position 15mm i/d C.P. brass bib cocks of best quality (as required by the Engineer-in-charge).(a) Bib cock long body. [HSR 30.75].

Providing & fixing in position C.P. brass stop cock (as approved by the engineer-in-charge). (a) 15 mm Stop cock. (ii) Concealed stop cock with flange. [HSR 30.76 (a) (ii)].

Providing and fixing C.P. brass liquid soap container of best quality (as required by the Engineer-in-charge). (d) teek wood (HSR 30.77)

Recovery items: The rates quoted against recovery items will not be included in the total amount rather it will be deducted while calculating financial statement of the agency. Material obtained from dismentalling of Tile terracing/floor/doors and windows has been calculated taking assumption that 80% of theoretical material will be retrieved. The dismentalled material can used in any of the item for the work after modification (bringing it to required specifications) as per approval of employer. In case it is not possible to use this material on the work, the agency can take away this material. This material can be taken away by the agency at the price quoted by the agency. However the reserve price is as udner: Note:- The reserve rates are minimum rates to be used as base for quoting purchase rate by the agency. No rates below the reserve price will be entertained and reserve price will be considered for all purposes in case the agency quotes lesser than reserve price. Good Bricks @ 5/- each

Brick Bats @ 500/- P.Cum

Door @ 500/- each

Window @ 200/- each

Metro Infra Solutions