TMC/ACTREC/ENGG/RD/ET-51

Amount

Providing corrugated 1.00 mm thick with zinc coating not less than 275 gm/m² G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.

Providing valleys of 90 cm wide overall in plain G.S. sheet fixed with polymer coated J, or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete : 1.60 mm thick with zinc coating not less than 350 gm/m²

STRUCTURAL STEEL WORK: Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, and two coatss of synthetic enamel as per approved shade welded and bolted including special shaped washers etc.complete. Fixing of weather shed at all levels/heights including supplying cutting fabricating welding or bolting erecting and fixing in position. This is including cost of materials labour with chiselling in wall or embedding in floor and making good the same by filling 1:2:4 cement concrete and plastering if necessary all as specified and directed by Engineer-in-Charge.,

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of approved make from factory/workshop to construction site including placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sq . Over and including priming coat of exterior primer applied @ 0.90 litre/10 sq

Providing 20 mm Cement Plastering for internal wal and ceiling with cement mortar 1:4 finished smooth with neeru over brick walls of concrete surfaces including hacking the concrete surfaces at all floors and levels in quantities as required at site including scaffolding curing, etc. complete all as directed by Engineer-in-Charge.

Providing & fixing in position aluminum sliding window shutter with frame fully glazed / aluminum grills witH using 5.5mm thick glass sheet of approved make and quality plain / frusted / bajari glass of approved make Triveni / Shri Vallabh /J / A/ G/ pilkinten fixed with aluminum beeding channels with two way rubber gasket / PVC lining to ensure water tightness and Nos rattling for aluminum grill fixing with F channel beeding using satin finish anodized 15 micron Jindal sections for shutters and frame of required size and section including using aluminum / S.S. hinges of required size of Archies make, tower bolt of required size of Archies make , C type alum handle for shutter of Archies make and other necessary hardware as per requirement etc. complete all as per specified and directed by Engineer in charge. sliding window two track

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)

P/F Hilti bolt 12 mm upto 150mm depth with pull test & proper anchoring adhesive

P/F Hilti bolt 16 mm upto 200mm depth with pull test & proper anchoring adhesive

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge

Providing & fixing 16 mm thick multi wall polycarbonate sheet of min weight of 3250 gms/sq. Meter, with extruded UV Protected (co. Test report shall be submitted) with special anti-glare protection to prevent glare and sun streaks, with vertical standing seam at both sides sun streaks, with vertical standing seam at both sides of panels, wielding or gluing of up stands or standing panels shall have a grip-lock double tooth locking mechanism to ensure maximum uplift capability. Panel ends shall be closed with additional End cap of Aluminum U-profile (anodized/poweder coated) The work shall be fitted on existing MS Structure perpendicular to direction of sheet with purline spacing as specified by manufacturer of M/s Tuflite Polymer or equivalent as approved and directed by Engineer in-charge. Colour of Sheet will be Opal weight /Green/brown or other colured as approved. The existing MS structure to be painted with one coat of red oxide and two coats of synthetic enamel paint of approved shed. The rate shall included cost of all scaffolding equipment’s, hardware, wastage etc working at all levels and heights.

Design and drawing of MS structure through CIDCO registered authorized Structural designer and issuing valid certificate of stability after completion work. The Designer should visit site during progress with two sets of drawing after completion of work.

NALANDA DECOR

JAYLAXMI ENTERPRISE

Bombay Construction

global air tecnix