Construction of link road from Bajrol to Chamerda via Lamber road Km 0/0 to 3/500

Amount

Excavation in hilly areas in all heights and depths and in all kinds of soil by manual/mechanical menus including saturated soil comprising of ordinary soil, soft rocks, hard rocks, chiseling /wedging out of rock (where blasting is prohibited) and other intermediate classification of soil setting out true to the required line, grades width cutting and trimming of side slopes and level as shown on the drawing and as directed by the Engineer-in-Charge at site according to the MORD technical specification clause 302,1603.1,1603.2 sorting out useful material and stacking the same in all leads and lifts in acquired width of the road and transportation of un-useful material for filling in road ways, camber, embankment for grade improvement and disposal of all un-useful material to required width of the road or on approved dumping sites through all modes of transportation including head load or animals transport or mechanical means along with its leveling fine dressing and carriage of machineries materials, tools, equipments and safety measures and incidentals necessary to complete the work by mechanical means and or labour if required. Any loss to the public/private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be duly compensated by him in all cases as per direction of the Engineer-in-Charge including carriage of material within all leads and lifts. (Recovery of useful stone i.e. 2202.10 cubic metre shall be made from the contractor @ Rs. 300/-(Rupees three hundred only) per cubic metre amounting to Rs 6,60,630/- only).The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Construciton of embankment with approved material obtained from borrow pits with a lift upto 1.5m(one point five metre) transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000m(one thousand metre) as per MORD Technical Specification Clause 301.5 the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Earth work in excavation for all type of road structure such as retaining walls, breast walls, culverts, drains and parapets etcetra in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rocks, chiseling/wedging out of rock (where blasting is prohibited) as per drawings and MORD technical specification clause 305 and as per direction of the Engineer-in-Charge including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal of materials upto all lead and lift including dressing of sides and bottom and back filling in trenches with excavated suitable approved material to the original surface in layers not exceeding 150mm ( one hundred fifty millimetre) compacted thickness including shoring and strutting and pumping and bailing out water ( surface and sub soil water) upto any depth and any quantum of water including cleaning of slush which may arise out during dewatering, as per the direction of the Engineer-in-Charge and carriage of material within all leads lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying reinforced plain concrete mechanically mixed and vibrated in open foundations retaining walls, breast walls and like structures etcetra complete as per drawings nominal mix 1:5:10 (one cement: five sand: ten graded crushed stone) aggregate 40mm (forty millimetre) nominal size including cost of form work and curing complete with out plum as per HP:PWD., specification complete in all respect including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600mm(six hundred millimetre) with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and MORD technical specification Clause 1204.3.8 as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Providing weep holes in brick/stone masonry/ plain/ reinforced concrete abutment, wing walls, return walls, retaining walls and breast wall with 110mm( one hundred ten millimetre) dia PVC pipe made of finolex pipe having pressure not less than 4kg/Cm2. (four kilograme per centimetre square) extending through the full width of the structures with slopes of I(V): 20(H) one vertical twenty horizontal towards drawing face complete as per drawing and MORD technical specification clause 614, 709, 1204.3.7 as per direction of Engineer- in -Charge, including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete for plain/reinforced concrete in open foundation for all type of structure complete of plain cement concrete Grade M-10 (M-ten) design mix or under water and curing complete including pumping or bailing out water, dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights/ depths including the cost of form work as per drawings and technical specification clauses 802.803.1202 and 1203 as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete for plain/ reinforced concrete in sub structure complete grade M-20 (M-twenty) of reinforced cement concrete design mix with cement content 300kg. (three hundred kilograme ) per cubic metre 20mm(twenty millimetre) nominal size in or under water and curing complete including pumping or bailing out water, dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights/ depths including the cost of form work as per drawings and MORD 2014 technical specification clauses 802,803,1202 and 1203 as per direction of Engineer-in-Charge within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete for plain/ reinforced cement concrete in super structure reinforced cement concrete grade M-25 (M-twenty five) design mix grade with minimum cement contents 340kg /cum (three hundred forty kilogramme per cubic metre) on ground or under water and curing complete including pumping or bailing out water, dewatering removal of slush as required at site may arise at the time of laying under water complete for all heights/ depths including the cost of form work as per drawings and MORD technical specification clause 802,803,1202 and 1203 as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, good service tax or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete wearing course M-30 (M- thirty) grade with minimum cement content 360kg. (three hundred sixty kilogram) per cubic metre on ground or under water and curing complete pumping and boiling out water dewatering removal of slush as required at site may arise at the time of laying under water complete for all heights/depths including the cost of form work as per drawing and MORD technical specification clause 800 and 1404. as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Supplying fitting and placing HYSD bar reinforcement (Fe 415) in sub structure made of Tata Tiscon/SAIL straightening cutting binding and placing of bars in position and including cost of binding wire complete as per drawings and technical specification clauses 1001,1004, ,1401 as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax,GST or other taxes imposed by the Government.

Supplying fitting and placing HYSD bar reinforcement (Fe 415)in super structure made of Tata Tiscon/SAIL strengthning cutting binding and placing of bars in position and including cost of binding wire complete as per drawings and MORD technical specification clauses 1001,1004 and 1401 as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax,GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete for plain/ reinforced concrete in open foundation/sub structure complete for all type of structure of plain cement concrete design mix M-15 (M-fifteen) with minimum cement content 240kg/Cum (two hundred forty kilograme/cubic metre) on ground or under water and curing complete including pumping or bailing out water, dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights/ depths including the cost of form work as per drawings and MORD technical specification clause 802,803,1202 and 1203 as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying ( to level and slopes ) 900mm dia (nine hundred millimetre dia metre) reinforced cement concrete heavy duty non pressure pipe I.S. class N.P.2 for culverts on first class bedding of granular material in single row including fixing collars with cement mortar 1:2(one cement: two sand) but excluding the cost of excavation, protection work, back filling, concrete and masonry work in head walls and parapets as per drawing and MORD technical specification clause 1101 and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Loosening of the ground upto a level of 300mm(three hundred millimeters) below the sub-grade level, watered, graded and compacted in layers to meet requirement of table 300.1 and 300.2 for sub-grade construction as per MORD technical specification clause 303.5.2 and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Construction of sub grade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with leads and lifts as per technical specification clause 303.1 as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Construction of granular sub-base by providing well graded materials grading-I spreading in uniform layers with tractor mount grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification MORD 2014 Clause 401.and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax good service tax or other taxes imposed by the Government.

Providing and laying, spreading and compacting stone aggregate of specific size 63mm to 45mm ( Sixty three millimetre to forty five millimetre) 75mm (seventy five millimetre) consolidated thick to water bound macadam specification including spreading in uniform thickness using template, hand packing, rolling with three wheel 80-100KN (eighty by hundred kilo newton) static roller in stages to proper grade and camber applying and booming, stone screening of size 11.2mm ( eleven point two millimetre) nominal size at the rate of 0.20cum ( zero point two zero cubic metre) per ten square metres and binding material at the rate of 0.06 cum ( zero point zero six cubic metre) to fill up the interstices of course aggregate, watering and compacting to the required density of grading-II as per MORD technical specification clause 405 and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying, spreading and compacting stone aggregate of specific size 53mm to 22.4mm ( fifty three millimetre to twenty two point four millimetre) 75mm (seventy five millimetre) consolidated thick to water bound macadam specification including spreading in uniform thickness using template, hand packing, rolling with three wheel 80-100KN (eighty by hundred kilo newton) static roller in stages to proper grade and camber applying and booming, stone screening of size 11.2mm ( eleven point two millimetre) nominal size at the rate of 0.18cum ( zero point one eight cubic metre) per ten square metre to fill up the interstices of coarse aggregate, watering and compacting to the required density of grading-III as per MORD technical specification clause 405 and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and applying primer coat with bitumen emulsion (SS-I) on prepared surface of granular base including cleaning of road surface and spraying primer @ 0.70-1.00 kilogram (zero point seven zero to one point zero kilogram) per square metre using mechanical means as per MORD technical specification clause –502 and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and applying tack coat with bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg.( zero point two five to zero point three zero kilogram) per square metre on prepared granular surfaces treated with primer and cleaned with hydraulic broom as per MORD technical specification clause 503 and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing, laying and rolling of open graded premix carpet of 20mm(Twenty millimetre) thickness composed of 13.2mm (thirteen point two millimetre ) to 5.6mm ( five point six millimetre) aggregate at the rate of 0.27 cum ( zero point two seven cubic metre) mixed with VG-30 bitumen at the rate of 14.6kg. ( fourteen point six kilogram) per ten square metre of road surface to required line, grade and level to serve as wearing course on a previously prepared base including mixing in a suitable plant, laying with paver finisher and rolling with a three wheel 80-100KN(eighty by hundred kilo newton) static capacity road roller capacity finished to required level and grade to be followed by seal coat of Type-B as per MORD technical specification clause 506 mechanical means including carriage of material with in all lead and lifts and as per entire satisfaction and direction of Engineer-in-Charge . The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying seal coat for sealing the voids in bituminous surface laid of the specified levels grade and cross fall using type-B as per MORD technical specification clause 508 VG-30 bitumen at the rate of 6.8 kg. ( six point eight kilogram) premix with 0.06cum (zero point zero six cubic metre) of fine aggregate per 10 sqm. (per ten square metre ) heated in mini hot mix plant and laying mechanically mixed material and rolling with power road roller 80-100 kN ( eighty to hundred kilo newton ) capacity as per direction of Engineer-in-Charge including carriage of material with in all leads and lift and other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying heavy duty precast cement concrete interlocking paver blocks vibro compacted upto M-50(M-fifty) grade including border or kurb block grey or coloured over sub base of concrete with 25mm (twenty millimeters) thick average thickness of cement 1:4 (one cement: four sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curing rubbing and polishing complete (sub base concrete) floor to be paid for 80mm( eighty millimeters) thick inter locking blocks of N.T.C IS make certified blocks and as per direction of the Engineer-in-charge including entire carriage of materials within all leads and lifts.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Reinforced cement concrete M-15 (M-Fifteen) grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc. Ordinary Km Stone as per drawing and MORD technical specification Clause 1703 the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government. (25.01) Ordinary Km stone

200 mtr.(two hundred metre) Stone

Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5mm (one point five millimeters) thick MS sheet duly stove white colour in front and grey colour on back with red reflective border of 65mm (sixty five millimeters) width and required letters and figures with reflective tape engineering grade as per clause 1701.3.9 of MORD for rural roads of required shade and colour supported and welded on 47mmx47mm (forty seven millimeters into forty seven millimeters) 12 SWG (twelve ) sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 (M-fifteen) grade cement concrete 450x450x600mm (four hundred fifty into four hundred fifty into six hundred millimeter), 600mm (six hundred millimeter) below ground level as per approved drawing clause 1701.2.2. 600mmx450mm (six hundred millimeter into four hundred fifty millimeter) rectangular 900mm (nine hundred millimetre) equilateral & Triangle. and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government. (26.01) 900mm (Nine hundred millimetre) equilateral & Triangle

900mm (nine hundred millimetre) side octagon.

Providing and erecting direction and place identifications of retro-reflectorised sign boards as per IRC:67 made of 2mm (two milimetre) thick M.S. sheet duly stove enameled paint in white colour in front and grey colour on back with red reflective border of 70mm (seventy millimetre) width and required message, letters, figures with reflective engineering grade tape as per MORD specifications of required shade and colour. Supported and welded on 47mm x 47mm(forty seven millimetre into forty seven millimetre) of 12(twelve) SWG square tube of 3050mm (three thousand fifty millimetre) height duly strengthened by 25mm x 5mm (twenty five millimetre into five millimetre) M/S flat iron on edges on back firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450mm x 450mm x 600mm (four hundred fifty millimetre into four hundred fifty millimetre into six hundred millimetre), 600mm (six hundred millimetre) below ground level as per approved drawing and MORD technical specification Clause 1701 and size (0.90 x 0.60= 0.54 Sqm) (zero point ninety into zero point sixty equal to zero point fifty four square metre) as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Providing and fixing of typical NABARD informatory sign board as per MORD specifications and drawing. Three MS plates of 1.6mm (One point six millimetre) thick,, top and middle plate duly welded with MS flat iron 25mm x 5mm (twenty five millimetre into five millimetre) size of back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm (twenty five millimetre int twenty five millimetre into five millimetre). The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2Nos. 75mm x 75mm (seventy five millimetre into seventy five millimetre) of 12(twelve) SWG sheet tubes posts (TATA SAIL) duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm ( four hundred fifty millimetre into four hundred fifty millimetre into six hundred millimetre), 600 mm (six hundred millimetre) below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm (forty seven millimetre into forty seven millimetre) of 12(twelve) SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy as per drawing Clause 1701 and Annexure 1700.1 as per approved drawing clause 1701.2.2 including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

PART -II Routine maintenance for five years after completion of construction work as per item and condition of bid document of contract of general condition of contract and technical specification of MORD including haulage carriage of all labour transport and material to various location through all modes of transportations with in all leads lifts and other incidentals. For first year maintenance .The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government. For First year Maintenance

For second year maintenance

For third year maintenance

For fourth year maintenance

For fifth year maintenance

Rajinder Rana

ASHOK KUMAR THAKUR GOVT CONTRACTOR

Piar Chand Chauhan

anil thakur

MSC Roads and Bridges Private Limited

SUMESH KUMAR