SPECIAL REPAIR TO BLDG NO TK-25, TK-27, TK-12A AND ETK-6-10-A OF INF BN AT MIL STN DHANA UNDER AGE (I) DHANA

Taking down chowkhats or frame nexc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkhats or frame exc 1.5 sqm but n exc 4.00 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Supply & fixing 105 x 60 mm size Pressed steel frames 1.25mm thick for doors with one rebate including necessary fixing lugs, hinges, lock strike plate, and making good with plastering in CM 1:4 including distempering as required at site etc, complete as specified and directed.

Supply & fixing 35mm thick factory made second class hard wood Glazed and skeleton door shutters, open rebated and prepared to receive gauze with sash bars, edges of framing plain fitted with cut and mitred beads (all around of Ist class soft wood) for securing wire mesh or glass, size of members of shutter as specified in SSR Pt-I Sec-8 clause 8.24(b) fitted to chowkats, complete as specified and directed.

S & F 30 mm thick Flush shutters, solid core construction, and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply and fixing anodised aluminium window and ventilator shutters,powder coated side hung / sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

Supply and fixing Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of andles and fixing approved anodised aluminium standard section around the opening, all complete as per equirement and direction of Engineerin- charge. complete all as specified and directed.

M&L for Frame work such as grills , gratings, railings, frame work of water tanks and the like conforming to Fe-290, Gde E-165 complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperure 1.40 mm and fixed with stainless steel wire staples fixed complete all as specified and directed..

S&F 150 mm Stainless steel handles ISI marked, cast type, complete all as specified and directed