SPECIAL REPAIR TO CERTAIN OTM ACCN AT AF STN TUGHLAKABAD UNDER GE (AF) TUGHLAKABAD

Amount

Demolition of Brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and directed.

Dismantling sructural steel work, including doors, gates but excluding framed truss etc all as specified and directed.

Excavation in over areas n.exc. 1.5m deep and getting out in soft/loose soil complete all as specified and directed.

Excavating in trenches not exc 1.5m wide and not exc 1.50 m depth, for foundations, etc, or for shafts, wells, cesspits, manholes, pier holes, etc and not exceeding 10 square meter on plan for manholes etc and getting out in soft/loose soil complete all as specified and directed.

M&L PCC in foundations, filling and mass-concrete type D-2 (1:4:8) (using 40 mm graded stone aggregate) complete all as specified and directed.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built with cement mortar1:4 complete all as specified and directed.

M&L M-25 (design mix) (using 20 mm graded agrregate) as in foundation, including rafts,footings, plinth beams etc complete all as specified and directed

M&L M-25 (design mix) (using 20 mm graded agrregate) as in columns, pillers,struts etc complete all as specified and directed

M&L for form work to sides of foundation, footings, rafts, base of columns sides and soffits of foundation, etc vertical or curved rough finished surfaces of concrete complete all as specified and directed.

M&L for form work to faces of walls, columns sides etc curved rough finished surfaces of concrete.complete all as specified and directed.

S&F for TMT bars 10 mm dia and over cut to length bent to shape required including bending hooking, binding with MS wire not less than 0.9 mm dia complete all as specified and directed.

S & F for TMT bars 6mm to10 mm dia cut to length bent to shape required including bending hooking, binding with MS wire not less than 0.9 mmdia but in stirrups complete all as specified and directed.

M&L fabrication of MS gate framed work including drilling welding making of hooks for hanging and fabricationn of guide rail, holdfast,sliding bolt, bolt and nut, roller wheel, stopper,bearing for holdfast/axle etc ornamental type complete all as specified and directed.

M&L mild sheet, plain black sheet 1 mm th in wall cladding, steel gates and similar work cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc all as specified and directed.

Preparing of new or previously untreated steel surfaces and applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface and applying one coat of red oxide, zinc chrome complete all as specified and directed

M&L Rendering 10mm thick in cement mortor 1:4 on brick works or concrete surfaces complete all as specified and directed.

M&L for 20mm thick Granite of (any type) work (table rubbed and polished) in steps , jambs,pillars window cills ,cooking platforms over cement screed and jointed with grey cement slurry like in cement mortor 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and directed.

M&L rounding to Edges of stone slabs one edge , such as in steps, cooking platforms , pillars and other similar situationss complete all as specified and directed

Returning and filling including spreading. Levelling, watering and well ramming in layers n.exc. 25cm in soft/loose soil complete all as specified and directed.

Removal of excavated material exc 50 m but n.exc 250 m and depositing were directed ata level not ecxeeding 1.5 mtr above the starting point complete all as specified and directed

Demolition of concrete in ground floors and pavings (un-reinforced) n.exc 15 cm thickness (below or above ground level) all as specified and directed.

Removing building material obtain from demolition to a distance of 100m or part therof (upto 5.0 km total distance) beyond the lead included in the rates, including loading, unloading and stacking at the destination out of MoD land all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth/ broken rubble mixed with earth around, in layers n. exc. 25cm, watering, and removing surplus soil to a distance n exc 50m & making good surface in soft/loose soil all as specified and directed

M&L PCC in foundations, filling and mass-concrete type C-2 (1:3:6) ( using 40 mm graded stone aggregate) all as specified and as directed.

Hardcore of Broken stone/boulders gauge n exc. 63mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface all as specified and as directed.

M&L Rendering 15mm thick in cement mortor 1:4 on brick works or concrete surfaces finished even and smooth without using extra cement all as specified and directed.

M&L for preparation of on new surfaces of walls including two coats of cement based paint over a coat of white wash complete all as specified and directed.

M&L for 100mm thick PCC 1:3:6, type C-2 (using 40mm graded aggregate) in hard standing all as specified and as directed.

M&L 100mm thick PCC type B-1, (1:2:4) (using 20 mm graded stone aggregate), finishing cement concrete even and smooth using with out using extra cement all as specified and as directed.

S&F for MS Pipe of Square/round shape Steel work in tubular tru-sses including special shaped washer, cleats etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 all as specified ans as directed.

S&F Rolled mild steel Plates (plain or chequered) channels. Square cut or notched (ordinary & counter sunk) forming holes, without any attachment GDE Fe410-w, Gde-E-250 quality-A all as specified ans as directed.

S&F framed worki n Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Fe 410-W (Gde- E- 250)quality-A all as specified and as directed.

Supply and fixing mild steel Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square exc 15 cm and n exc 22.5 cm long, dia of shank 16 to 20mm all as specified and directed.

Supply and fix Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required:hooks (stay), heavy, for largegates; hook and pintle hinges:large hasps and staples; chains;hand made sliding bolts; clamps;hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall,in valley gutters fixed with self tapping screws / L or J type hook all as specified.

M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds,mitred/stopped ends etc. completed all as specified and directed

M&L for Plain cement concrete (1:2:4) type B-0, (using 12.5mm graded crushed stone aggregate) as in coping including weathering, slightly rounded or chamfered angles and throating including necessary form work, for filling in bed block of hold fast, back side of steel frame etc complete all as specified and directed.

Taking down wall plastering on brick wall/concrete surfaces including racking out joints hacking for key scrubing down with water complete all as specified and as directed. Note:- Quoted rate shall be deemed to be included for work of any height including scoffolding

M&L for 15mm thick rendering readymix plaster of approved make (as per manufactures instruction) on exterior walls or concrete surfaces finished even and smooth, without extra cement complete all as specified and directed by Engr-In-Charge Note:- Quoted rate shall be deemed to be included for work of any height including scoffolding

M&L for 10mm thick rendering readymix plaster of approved make (as per manufactures instruction) on interior walls or concrete surfaces finished even and smooth, without extra cement complete all as specified and directed by Engr-In-Charge Note:- Quoted rate shall be deemed to be included for work of any height including scoffolding

M&L for 5mm thick rendering readymix plaster of approved make (as per manufactures instruction) on ceilings or concrete surfaces finished even and smooth, without extra cement complete all as specified and directed by Engr-In-Charge Note:- Quoted rate shall be deemed to be included for work of any height including scoffolding

M&L Preparing new plaster surface of wall of any description and apply two coats of exterior weather proof water base emulsion paint (APEX) in white or tinted paint over a coat of primer complete all as specified and as directed. Note:- Quoted rate shall be deemed to be included for work of any height including scoffolding

M&L Preparing old plaster surface of wall of any description and apply two coats of exterior weather proof water base emulsion paint (APEX) in white or tinted paint over a coat of primer complete all as specified and as directed. Note:- Quoted rate shall be deemed to be included for work of any height including scoffolding

M&L for Preparing new surfaces of walls and applying two coat of Oil Bound Distemper over a priming coat complete all as specified and directed.

M&L for Preparing old surfaces of walls and applying two coat of Oil Bound Distemper complete all as specified and directed.

M&L preparation of New surfaces of ceilling and applying three coat of white wash complete all as specified and directed.

M&L preparation of old surfaces of ceilling and applying two coat of white wash complete all as specified and directed.

M&L making good broken edges of chajjas slabs, faccias, fins, etc in patches area not exceeding 1 Sqm of each patch, height upto 15 metre, with 15mm thick cement plaster and sand mortar (1:3) or with PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) with necessary formwork / scoffolding, finished the surface even and smooth without using extra cement complete all as specified and directed

Complete taking down/demolition carefully any type of existing roof treatment i.e. mud puska, brick coba, brick tiles, any type of tiles, PCC, plastering, leeping etc. of any type and thickness varying from 20mm to 125mm in roofs including cleaning the surface with broom, after removal (removing the rubbish) and preparing surfaces to the entire satisfaction of Engr-in Charge /GE complete all as specified and as directed. Note:- The removal of debris shall be measured separately

Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and slurry 1:3 complete all as specified and as directed.

M&L plain cement concrete 1:2: 4 type B-0 (using 12.5 mm graded aggregate) as in roof for maint the uniform slope are any thickness at any height and in any position all as specified and directed by Engr-in-charge at site.

M&L for 10mm thick plastering in CM (1:3) on concrete roof surfaces Sqm with water proofing compound @ 3% by weight of cement, surface finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge. Note - WPC shall be measured and paid separately.

Supply only water proofing compound @ 3% by wt of cement complete all as specified and directed by Engr-in-Charge.

M&L applying water proofing treatment with APP modified polymeric membrane centre core of 100 micron HMHDPE, weight not less than 3 Kg/Sqm and clear thickness of membrane not less than 3 mm, on newly prepared surface with torch application method with overlaps 100mm on length side and 100 mm on the width side as per manufacturer instruction complete all as specifid and as directed with the following description :- (a) Apply evenly a coat of bituminous primer conforming to IS -3384 @ 0.40 Kg/Sqm. (b) A coat of bonding bitumen confirming to IS -702 of grade 85/25 @ 1.20 Kg/Sqm as a IInd course. (c) Laying of APP modified polymeric membrane as a IIIrd course. (d) A coat of bonding bitumen confirming to IS -702 of grade 85/25 @ 1.20 Kg/Sqm as a forth course.

M&L providing cement concrete in roof or mud stops using type B-1 1:2:4 (using 20 mm graded aggregate) rounded or chamfered on edges complete all as specified and directed by Engr-in-Charge.

S&F Steel rolling shutters of 1.25mm thickness of laths, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated of gear operated type with bevel gear box and crank handle complete all as specified and directed.

Supply and fixing framed work such as grills, gratings, tank cover, drain covers made of angle,for monkey proofing, channel, bars and sheets etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and as directed.

Supply and fixing welded steel wire fabric not exceeding 4 kg/sqm welded to steel sections at any position complete all as specified and as directed.

M & L for Framed work 410-W (Gde E-250 )as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including hinges weldingcomplete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) , removing serviceable tiles to store and rubbish off the permises complete all as specified and directed.

M&L for Screed bed or bedding layer of cement mortar 15 mm thick in CM 1:6 for laying floor finishes all as specified and directed..

M&L joint free non skid coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm (600 x 600) as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Serial item No 63.here-in-above but in vertical surfaces as skirting complete all as specified and directed.

M&L Glazed ceramic coloured tiles of size 450x300x7mm thick on vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match the shade etc including 10mm thick rendering in CM (1:4) complete all as specified and directed .

Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters (Without taking off shutters from the frames) complete.all as specified and directed

Taking down chowkhats or frame n.exc 1.5 Sqm each with shutters (W/out taking off shutters from the frames). complete.all as specified and directed

S & F anodised aluminium powder coating (minimum thickness of powder coating 50micron) frame for doors windows,ventilators and partition section with one or more rebates including joining cleats for fixing etc. complete all as specified and directed.

S&F Anodised aluminium powder coating door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified and directed.

S&F aluminium powder coating of any colour (Thickness of powder coating not less than 50 micron) window and ventilator shutter side hung type without sashbar, aluminium sections weighing 0.55kg/m incl necessary joining cleat glazing clips, rubber neoprene packing, alumimium anodised snap beading, screws , peg stay 150mm long -1 No, hinges type B-21 100mm long -2 Nos, suitable handle -1 No complete all as specifiedhandles 2 Nos in each door, hinges, aluminium snap beading screws complete all as specified.

M&L for 12mm th prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination, fixed with screws to frame work complete all as specified and directed.

Supply and fixing in repairs 7mm thick aluminium grill of make ' Deco grill DG-104 model fitted in to suitable aluminium channel and fixed to windows / ventilators including channel complete all as directed by Engr-in-charge.

M&L for 5.5mm thick plain sheet glass seleted quality in squares exc 0.5 Sqm each pane and fixed in anodised aluminium frame work including necessary joining cleats, glasing clips, rubber neoprene pack in etc. complete all as specified and directed.

M&L for 4.0mm thick plain sheet glass seleted quality in squares n.exc 0.5 Sqm each pane and fixed in anodised aluminium frame work including necessary joining cleats, glasing clips, rubber neoprene pack in etc.complete all as specified and directed.

S&F in repairs double action floor spring hydraulically regulated made up of of minimum 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification and drawing and as directed by Engineer-in-Charge.

S&F for 30 mm thick factory made solid panel PVC door shutter confirming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 guage thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C' channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings ass as directed by Engineer-inCharge.

S& F Pressed steel frames of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete.all as specified and directed

M&L cutting holes exc half brick but not exc one brick in brick walls bulit in cement mortor or cement lime mortor and stone walls bulit in lime mortor for inserting holdfasts & making good dismantltled portion in CM (1:3) or PCC (1:2:4) type B1 as all specified and directed

M&L for 35 mm thick factory made, second class hardwood plain framed, panelled shutter(two panel) with rock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (part 1), kiln seasoned and chemically pressure treated) all as specified and directed.

M&L for Preparation of new wood surface of any description over 10cm width or girth applying two coat of synthetic enamel paint over a coat of pink primer complete all as specifed and directed.

S&F butt hinges of size 100 mm extruded aluminium alloy with galvanised mild steel hinge pin , anodised and fixed type B-21 all as specified and directed.

S&F Aliminium anodised barrel tower bolts, 150 mm long complete.all as specified and directed

S&F 200mm Aluminium, anodised, barrel tower bolts of extruded section and fixed all as specified and directed.

S&F Aluminium, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed of size 300mm all as specified and directed.

S&F Aluminium handles, cast type, anodised of 100mm size all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor overall length of cover plate 140mm all as specified and directed.

S & F in repair vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) including connection to drain or out going pipe and flush pipe anti syphonage pipe etc complete and making good to floor complete all as specified and as directed.

S &F Plastic seat cover for EWC closed pattern, flat bottom with MS chromium plated hinging device all as specified and directed.

Supply only PVC valveless ,syphonic action type flushing cistern 10 Ltrs capacity low level ,with inlet , ball valve , float and handle including brackets all as specified and directed.

S&F in repairs Vitreous China urinals, half stall type, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement; fixing flushing system with brackets, flush pipe grating and union for discharge pipe all as specified and directed.

S&F in repairs wash basin vitreous china white (flat back) 550 mmx400mm size including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe all as specified and directed.

S/F waste fittings brass Chromium Plated for glazed ware sinks basins etc with long screwed shanks and fly nuts flange end embedded in red lead cement and other end fixed of 32mm size all as specified and directed.

S&F of 32 mm bore of pipe low density (LDPE) of pressure rating 6 kg/ sqcm fixed to wall or floor etc including fittings complete all as specified and as directed.

S&F PVC connection of 15mm size,600mm long with PTMT nuts complete all as specified and directed.

S & F in repair of Health Faucet(ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete all specified and directed

S&F bib tap cast copper alloy chromium plated fancy type screwed for iron pipes or for brass ferrule of 15mm bore with capstain head all as specified and directed.

S&F stop valve cast copper alloy chromium plated high pressure, fancy type screwed on both ends with iron pipe or unions, 15 mm bore fancy type all as specified and directed.

S&F fancy type pillar tap cast copper alloy chromium plated capstain head screwed down high pressure with long screwed shank and fly nuts for iron pipe, fancy type 15mm dia of bore all as specified and directed.

M&L for PVC (SWR) floor trap of 75mm dia, plain with grating including jointing with solvent cement all as specified and directed.

S&F in repair of CP soap tray fixed to walls with rubber plugs complete all as specified and directed.

S&F 600x 450mm mirror with PVC frame and 5 mm thick glass with PVCsheet backing and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified and directed.

S&F 20mm dia brass chromium plated towel rail 'D'Type 60 cm long between flanges fixed to wall with brass screws and cup washers all as specified and directed.

Taking up or down GI tubing /PPR pipe15 mm bore pipe complete all as specified and as directed.

Taking up or down GI tubing/PPR pipe 20mm bore pipe complete all as specified and as directed.

S&F in repair of GI tubing 15 mm bore medium grade ISI marked galvanise with all fitting and fixed to walls and ceilings or laid in floors, complete all as specified and directed.

S&F in repair of GI tubing 20 mm bore medium grade galvanise ISI marked with all fitting and fixed to walls & ceilings or laid in floors, complete all as specified and directed.

S&F in repair of sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, etc complete all as specified and as directed.

M&L for PVC (SWR) Multi floor trap of 75mm dia, plain with grating including jointing with solvent cement all as specified and directed.

S&F PVC (SWR) pipes single socketed 110mm dia in any length with rubber ring joints fixed to walls complete all as specified and directed.

S& F PVC (SWR) bends 110mm dia any radius complete all as specified and as directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in sooft/ loose soil all as specified and directed.

S&F Machine pressed PCC interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment laid dry, complete all as specified.

M&L for sand filling under sub base including watering and consolidating as in cushioning bed for interlocking paver block complete all as specified and directed by Engr-in-Charge.

Removing excavated material (soil) exc. 1.50 km but n exc. 5 km and depositing where diected completed all as specified and directed.

Schedule of Credit

akenterprises (BID ID -3175169)

Green Leaves (BID ID -3175575)

M/S DEVRAJ SINGHAL (BID ID -3174231)

V r traders (BID ID -3175279)

Parveen Builders (BID ID -3165951)

M/S S.K.Electricals (BID ID -3168553)