Construction of Law and Order Police Station building with development works at Brammapuram in Vellore District.

Amount

E0001) Earth work excavation for foundation in all soils (including refilling) a) 0 to 2 mt.

E0003) Earth work excavation in Soft disintegrated rock (including refilling) a. 0 to 2 mt.

E0005) Earth work excavation for Open foundation (excluding refilling) a) 0 to 2 mt.

E0006) Earth work excavation for Open foundation for drains (excluding refilling) width upto 1.25 m a) 0 to 2 mt.

RE0006) Providing Pre-Constructional Antitermite treatment

F0040) Supplying and filling in foundation and basement with filling crushed stone sand

F0006) Supplying and filling with 40mm size Hard broken stone jelly in foundation and basement

F0007) Supplying and filling with 20mm size Hard broken stone jelly in foundation and basement

F0026) Filling in foundation and basement and other similar works with Excavated earth

F0013) Supply and filling in foundation and basement with gravel

CSMP0002) Plain cement concrete 1:5:10 (One of cement, five of crushed stone sand and ten of hard broken stone Jelly including Mortar Plasticizer (Liquid) at 200ml per bag) for foundation and basement using 40 mm gauge hard broken stone jelly

CSMP0003) Plain cement concrete 1:2:4 (One of cement two of crushed stone sand and four of Hard Broken Stone jelly) (including Mortar Plasticizer (Liquid) at 200ml per bag) using 20mm gauge hard broken stone jelly

CSMP0004) Plain cement concrete 1:8:16 (One of cement, eight of crushed stone sand and sixteen of broken brick jelly including Mortar Plasticizer (Liquid) at 200ml per bag) for foundation and other similar works using 20mm gauge broken Brick Jelly

CSMP0005) Plain cement concrete 1:3:6 (one of cement, three of crushed stone sand and six of hard broken stone jelly including Mortar Plasticizer (Liquid) at 200ml per bag) for foundation and other similar works using 20mm gauge hard broken stone jelly

CS0037) Supplying and fixing of precast cement concrete slab for cupboard / ward robes, shelves, cover slab for chambers baffle walls etc., and other similar works 20mm thick using standardised concrete mix M20 I. 20mm thick a) In Stilt / Ground Floor

b) In First Floor

CS0038) Supplying and fixing of precast cement concrete slab for cupboard/ ward robes, shelves, cover slab for chambers, baffle walls etc., and other similar works 40mm thick using standardised concrete mix M20 II. 40mm thick a) In Foundation and Basement

b) In Stilt / Ground Floor

c) In First Floor

C0049) Precast cement concrete Jally ventilator using standardised concrete mix M20 without vibrating charges 50mm thick a) In Ground Floor

C0065) Providing and laying in position, Standardised Concrete Mix M-20 Grade (Using crushed stone sand) a) In Foundation and Basement

b) In Stilt / Ground Floor

c) In First Floor

d) In Second Floor

C0020) Providing Rain water harvesting pit of 1.0m dia 0.60m depth and filling with CS sand and stone jelly of 40mm size and by augering 300mm dia bore pits to a required depth with stone jelly of 40mm size materials and perforated precast cover slab (M20) etc., all complete Providing Pit

C0020.a) Augering 30cm dia

CSMP0001) Supplying and fixing of fibre mixed precast slab of 50mm thick of all required shapes made in cement concrete 1:3:6 (one of cement,three of crushed stone sand and six of 20mm hard broken stone jelly including Mortar Plasticizer (Liquid) at 200ml per bag) with secondary reinforcement fibre of approved quality at 0.25% by weight of cement (125gm of fibre for 1 bag i.e., 50Kg of cement) used including cost of all materials, moulding, curing, transportation, laying, pointing etc., for approach road,pavement slab and other similar works etc., complete as per the relevant standard specifications and as directed by the departmental officers.

BMP0011) Brick work in cement mortar 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in foundation and basement

BMP0012) Brick work in Cement Mortar 1:6 (One of cement and six of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² for superstructure in the following floors a) In Ground Floor

b) In First Floor

c) In Second Floor

BMP0013) Brick partition wall in Cement Mortar 1:4 (One of cement and four of Crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 110mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in the following floors a. In Foundation and basement

b) In Ground Floor

c) In First Floor

d) In Second Floor

BMP0014) Brick partition wall in Cement Mortar 1:4 (One of cement and four of Crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 70mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in the following floors a. In Ground floor

b) In First Floor

FL0003) Supplying and fixing of 20mm thick Bituminous Expansion joint filler Pad

FLMP0001) Flooring with a bed of CC 1:5:10 (one of cement, five of crushed stone sand and ten of hard broken stone jelly including Mortar Plasticizer (Liquid) at 200ml per bag) using 40mm size hard broken stone jelly

FLMP0002) Plastering the top of flooring in CM 1:4 (One of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

FL0025) Weathering Course with concrete broken brick jelly 20mm gauge

FLMP0004) Finishing top of roof with one course of Pressed Tiles of approved superior quality of size 23cmx 23cmx20mm thick laid over weathering course in CM 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag,) 12mm thick mixed with Water proofing compound at 2%

FLMP0005) Supplying and fixing of Colour glazed tiles (Best approved quality and the same shall be got approved from the Executive Engineer before using) over cement plastering in CM 1:2 (One of cement and two of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 10mm thick

FLMP0006) Supplying and fixing of colour Ceramic Tiles Anti skid without corrugated design for flooring and other similar works (Best approved quality, colour and shade shall be got approved from the Executive Engineer before using) over cement mortor 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

FLMP0010) Supplying and fixing of Ivory colour Vitrified Tiles of size 59.5x59.5cmx10mm for flooring and other similar works (Best approved quality, colour and shade and the same shall be got approved from the Executive Engineer before use) in cement mortar 1:3 (one of cement and three of curshed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

FLMP0011) Supply and laying superior variety Concrete Designer tiles for flooring in CM 1:3 (One of Cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

FLMP0012) Supply and fixing of GRANITE TILED FLOORING (Superfine Polished with Machine Cut Edges) of size 2'0 x 1'0 or 1'0 x 1'0 or 1'0 x 0'6 of 10 mm thick (Ruby Red) using grout joint, laid over CM 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick

FW0004) Providing Form work and centering for reinforced cement concrete works a) For Column footings, plinth beam, Grade beam, Raft beam, Raft slab etc.,

b) Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase waist, portico slab and other similar works

c) For Square and rectangular columns and small quantities such as sunshade, parapet cum drops window boxiing, fin projection and other similar works.

d) For Vertical wall

e) For Circular Column

f) For Curved surface

PLMP0001) Plastering with CM 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick

PLMP0002) Plastering with CM 1:4 (one of cement and four of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick

PLMP0003) Special ceiling plastering in cement mortar 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 10mm thick

PLMP0004) Plastering in cm 1:3 (one of cement and three of crushed stone sand (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm tk. mixed with water proof compound at 2%

PLMP0005) Plastering in CM 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick for border finish in all floors a) 150mm wide border

b) 75mm wide border

c) 50mm wide border

PL0027) Providing Polymer Coating (Water Proof Coating) for sunken portion of toilet with following specification and the surface shall be cleaned to remove all dust, foregin, matters lose materials or any other deposits of contamination by rubbing with wire brush. Slurry: Dry blend and polymer liquid blend shall be mixed into the desired ratio as per recommendation of the supplier. The mix shall be stirred thoroughly until no bubbles remain in the mix. Any lumps found in mix shall be removed. Apply first coat of polymer modified cementitious slurry by brush on wet cleaned surface. After drying, second coat shall be applied on the first coat as directed by the departmental officers etc. The rate inclusive of cost of materials and labour, etc., complete.

PA0001) White washing three coats using clean shell lime slaked

PA0022) Painting the new wood work with two coats of approved first class synthetic enamel ready mixed paint in addition to one coat of Primer

PA0026) Painting the new Iron work and other similar works such as PVC /ASTM Pipes, Kerb Stone and grills with two coats

PA0027) Providing wooden (melamine) polish for new wood

PA0032) Supplying and applying of full putty one coat with aproved make wall putty for smooth finishing the new cement plastered walls

PA0037) Painting the New walls with two coats of approved best ready mixed plastic emulsion paint for inner walls

PA0042) Painting the New walls with two coats of approved best ready mixed exterior emulsion paint outer walls in addition to one coat of approved primer coat

J0001) Supplying and fixing of Teak wood wrought and put up a) Teak wood over 2m and below 3m length

b) Teak wood below 2 m length

J0021) Supply and fixing of best approved superior variety magnetic door catches

J0029) Supplying of Mild Steel hold fasts horizontally twisted of size 230x40x4mm

JD0073) Providing and fixing factory made unplasticized polyvinyl chloride (UPVC) Door Frame with shutter

JV0022) Supply and fixing of UPVC (Un plasticized polyvinyl chloride) Louvered ventilators

JW0042) Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open)

JW0044) Supply and fixing of UPVC Sliding Window (Two track)

JD0098) Supplying and fixing of Teak wood Panelled Double leaves door shutters with Brass fittings Suitable for Door of size a) 1800 x 2100 mm

JD0027) Supplying and fixing of T.W. single leaf Door shutters using 9 mm tk. phynol bonded BWR plywood shutters with brass screws a) 900 x 2100 mm

JD0059) Supplying and fixing of Single leaf Solid core flush door shutters Suitable for Door of size a) 900 x 2100 mm

JD0086) Supply and Fixing of MS Door (for lockup door) a) MS Door of Size 1000 X 2100mm

JV0014) Supply and Fixing of MS ventilator of size (for lockup ) a) MS Ventilator of size 600 X 600mm

b) MS Ventilator of size 900 X 600mm

c) MS Ventilator of size 1200 X 600mm

d) MS Ventilator of size 1200 X 800mm

f) MS Ventilator of size 1350 X 600mm

GR0001) Supplying and fixing Mild Steel grills as per the design approved

RE0004) Supplying, fabricating and placing in position of Mild steel Grills / Ribbed Tor Steels (without cement slurry)

JD0094) Providing T.W.double leaf shutters for cupboard/ward robes with 9mm thick phenol bonded BWR grade plywood

JD0099) Providing T.W.double leaf shutters for cupboard/ward robes with 9mm thick phenol bonded BWR grade plywood (For Rest room)

FLMP0018) Supplying and fixing of pre-cast kerb stone of size 450x300x150mm made in CC 1:3:6 (One of cement, three of crushed stone sand and six of hard broken stone jelly) using 20mm size hard broken stone jelly including Cost of Mortar Plasticizer (Liquid) at 200ml per bag, the cost of Kerb stone moulding, laying, curing, transporting, pointing and as directed by the departmental officers..

WS0002) Supplying and fixing of 110mm dia PVC SWR pipe with ISI mark conforming to IS 13952:1992- type `A` for Rain water down fall pipe

WS0276.a) 20mm dia PVC water supply ASTM pipe (fully consealed in walls)

WS0033) Supplying and fixing of half turn C.P Long body Tap of 15mm dia

WS0036) Supplying and fixing of half turn C.P short body Tap of 15mm dia

MS0050) Supply & fixing of CI Steps (not less then 5 Kg each)

WS0006) Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of schedule 40 of wall thickness a) 32mm dia ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI/GM specials

b) 25mm dia ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI/GM specials

SA0002) Supplying and fixing of porcelin wash hand basin (white without pedastal), superior variety of size 550x400mm with all accessories

SA0036) Supplying and fixing of PVC (SWR) pipe with ISI mark - type 'A' for Ventilating shaft with cowl a) 110mm dia PVC SWR pipe of 3m with required PVC cowl & PVC specials etc.,

SAMP0006) Supplying and fixing 150mm x 100mm size stone ware Gully trap with iron gratings over a bed of 150mm thick brick jelly concrete in CC 1:8:16 (one of cement, eight of crushed stone sand and sixteen of broken brick jelly) using 40mm size brick jelly and brick masonry wall 110 mm thick using kiln burnt country bricks of size 8¾”x4¼”x2¾” (22x11x7cm) in cm 1:5 (One of cement and five of crushed stone sand) plastered with CM 1:3 (One of cement and three of crushed stone sand) 12mm thick including Mortar Plasticizer (Liquid) at 200ml per bag etc., complete and as directed by the departmental officers.

SAMP0003) Supplying and fixing of PVC Nahani Trap not less than 75mm 4 way / 2 way (Superior variety) having minimum of water seal of 50mm confirm to relevant I.S. specifications with its latest amendments including resting on the bed of brick jelly concrete 1:5:10 (One of cement, five of crushed stone sand and ten of 40 mm gauge brick jelly) including Mortar Plasticizer (Liquid) at 200ml per bag etc., complete

SA0013) Supplying and fixing of Flat Back Urinal

SAMP0004) Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580 mm x 440 mm of approved make with ISI mark (to be got approved from EE before use) with PVC SWR grade 'P' or 'S' trap (Using crushed stone sand) (including Mortar Plasticizer (Liquid) at 200ml per bag) In Ground floor.

SA0025) Supplying and fixing EWC superior variety (white) 500mm with 'P' or 'S' trap (Using crushed stone sand) (including Mortar Plasticizer (Liquid) at 200ml per bag)

SA0033) Supplying and fixing of PVC SWR pipe (Soil line) with ISI mark - type 'B'. a) 110mm dia PVC SWR pipe including all required PVC specials etc., all complete.,

b) 75mm dia PVC SWR pipe including all required PVC specials etc., all complete.,

SA0035) Supplying, laying and concealing the 50mm dia PVC (SWR) pipe with ISI mark confirmed to IS 13952-1992 Type-B for waste water line

SA0047) Supplying and laying and loose jointing the following dia stone ware pipes with ISI mark Superior variety (glazed) with spigot and sockets ends in dry conditions and tested with water, after the pipes are laid to proper gradient to the alignment etc., complete and as directed by the departmental officers. b) 150 mm dia S.W. pipe

SA0048) Supplying, laying and jointing the following dia UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a) 110 mm dia UPVC Non Pressure pipe

b) 160 mm dia UPVC Non Pressure pipe

SA0052) Supplying and fixing of following dia PVC Bend a) 110mm dia PVC Bend

SA0053) Supplying and fixing of following dia PVC Tee b) 160mm dia PVC Tee

MS0003) Supplying and fixing of Aluminium Towel Rail of 75cm long

MS0006) Supplying and fixing of Aluminium plate with five pin for Coat Stand

MS0007) Providing and fixing iron Chromium plated 8 gauge Picture hook

MS0053) Supplying and fixing of C.I man hole cover with locking arrangements of approved quality and brand of size 0.6m x 0.6m (50Kg) as per standard specifications including cost of material, labour charges for fixing etc., all complete and as directed by the departmental officers.

L0001) Supply and planting Avenue Trees

L0004) Supplying and fixing of Triangular shape chicken mesh Tree guard

NL0002) Supplying Fabrication and Erection in position of M.S. scheme name and layout board

MS0008) Supplying and fixing of Bevelled Edge Mirror of approved quality and brand of size 500x400x5.5mm shelf type

EL0002) Wiring with 1.5 sqmm PVC insulated single core multistrand fire retardant flexible copper cable with ISI mark confirming to IS 694/1990 1.1 K.V. grade cable a) Light point with ceiling rose

b) Light point with bakelite battern type holder

c) Point wiring for calling bell/buzzer with push type switch with required Buzzer.

EL0010) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable for Fan Point

EL0018) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable for Stair case light point

EL0026) Wiring with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 K.V. grade cable for 5 Amps 5 Pin plug Socket Point @ Switch Board Itself

EL0034) Wiring with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable for 5 Amps 5 pin Plug Socket Point at Convenient Places

EL0041) Supplying and fixing 15 Amps 3 pin plug type socket with switch

EL0214) Earthing and Earth connections: Providing Earthing Station using pipe electrode as per IS 3043 using 2.5m of 40mm and 1.0m of 20mm B-class GI pipe including all requirements

EL0074) Supply and fixing of best approved superior variety concealed type Fibre box with M.S. Fan Hook

EL0075) Charges for assembling and fixing of ceiling fan of different sweep with necessary connections and fixing of fan regulator

EL0078) Supply and delivery of following Electric Ceiling fan with ISI mark with blades and double ball bearing, capacitor,etc., complete a) 48"" Electric fan 1200mm sweep

EL0084) Supplying and fixing of 300 mm dia sweep AC exhaust fan of approved ISI quality

EL0070) Supplying & fixing of LED bulbs suitable for fixing it to pendent / bakelite battern holder of best approved variety etc., all complete and as directed by the departmental officers. a) 9 watts LED bulb

b) 12 watts LED bulb

EL0047) Supplying and fixing of 4'18 watts crystal LED tube light and fixing the tube light fittings

EL0045) Supplying and fixing of water tight Bulk head fitting suitable for 12w LED bulb with guard

EL0101) Supplying and fixing of 30 watts LED bulb with Street light fittings arrangements

EL0147) Supplying and fixing of 18 W LED 3000 K Square type recessed fitting with LED indoor fittings including cost of materials and labour charges etc., all complete and as directed by the departmental officers.

EL0190) Run of main with 2 wires of 2.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable

EL0191) Supply and Run off main with 2 wires of 4 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable

EL0200) Run of main with 4 wires of 4 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable

EL0201) Run off 4 wires of 4 Sq mm. PVC insulated single core multi strand fire retard flexible copper cable (for EB service connection ).

EL0230) Supplying and fixing of 3 Nos.of 100 amps 500 volts grade porcelain fuse unit on suitable teakwood plank varnished to be fixed on the top of pole EB street pole with necessary clamps including cost of all materials etc., all complete and as directed by the departmental officers.

EL0165) Supply and fixing of 63 amps triple pole main switch with fuse and neutral link on a suitable well varnished teak wood board including necessary interconnection and earth connection cost of all materials etc., all complete and as directed by the departmental officers.

EL0237) S & F of 450 x 375 x 20mm thick TW plank

EL0597) Supply and fixing of 25A Flush type Wall Socket 25A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug)

EL0312) Supply and fixing of 6 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63 A 4 P MCB switch as incoming and 18 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Lower End

EL0549) Labour charges for laying of PVC Aluminium Armoured LTUG cable excluding Civil works Below Ground level

EL0548) Labour charges for laying of PVC aluminium armoured LTUG cable on post and wall to make good Above Ground level

EL0298) Supply and fixing of 32 Amps Electro mechanically operated three phase Earth Leakage Circuit Breaker/Residual Current Circuit Breaker (ELCB/RCCB) Three phase

EL0174) Supplying and run of 8 SWG GI wire for earth connection on wall / below ground level

EL0241) Supplying and fixing best country wood meter cupboard

EL0337) Supplying and delivery of following PVC aluminium armoured LTUG cable a) 3.5 core 35 Sqmm PVC aluminium armoured LTUG cable

EL0342) Supplying and delivery of Brass cable Gland suitable for PVC Aluminium armoured LTUG cable a) 3.5 core 25 Sqmm Brass cable gland

WS0107) Supplying and fixing of 32mm dia PVC Tee with end cap

GR0053) Supplying and fixing in position of colour galvalume sheet of 0.47mm thick as ridge piece inclusive of overlap length labour charges and nuts, bolts etc., all complete and as directed by the departmental officers. (the quality and the brand of material should be got approved by the executive engineer before use)

GR0056) Supplying & fixing of Stainless steel Hand Rails for Staircase (304 L Grade)

GR0059) supplying, fabrication and fixing in position of mild steel angle truss including cost of materials and labour charges etc., all complete and as directed by the departmental officers.

SA0070) Supply and delivery at site and fixing of SFRC manhole cover with frame and locking arrangements b) 600mm x 600mm

NL0006) Supplying and fixing of following size Aluminium dye casting lettering and numbering b) 9" height Aluminium letters

NL0007) Supplying and fixing of following size plastic foam plate of 3mm thick with 3' height vinyl cutting numbers with approved colours etc., complete and as directed by the departmental officers. (The quality of the material should be got approved from Executive Engineer before use) b) 24'' x 4" Plastic Foam Plate

MS0059) Supplying and delivery of following God - rej novtal lock including all cost of lock and labour charges etc., all complete and as directed by the departmental officers. a) 6 Lever with 3 keys

WS0236) Drilling of (150mm) vertical bores in hard rock area to any required depth as desired by TNPHC officials including labour charges for grouting and inserting the casing pipe in the drilling hole etc., a) Upto 150m depth ending below Ground level

b) From 151m upto 180m depth ending below Ground level

c) From 181m upto 210m depth ending from Ground level

d) From 211m upto 240m depth ending from Ground level

e) From 241m upto 250m depth ending from Ground level

WS0148) Supply and delivery of 150mm dia of PVC casing pipes a) 150mm dia PVC Pipe

WS0207) Supply and fixing of 160mm dia PVC end cap for borewell bottom and top cover including cost of all materials and labour charges for fixing etc., all complete and as directed by the departmental officers.

WS0240) Supply and delivery of PVC end cap suitable for 160mm dia PVC casing pipe of approved quality etc., all complete.r

WS0018.XIII.b) Supplying and fixing of the 40mm dia MS Borewell clamp set

WS0278) Supply and delivery of clear water vertical wet type 3 phase 5 HP - Submersible pumpset with ISI mark suitable for 150mm dia borewell o. 50 lpm x 175 m

WS0279) Supply and delivery of 2 HP - Openwell Submersible pumpset with ISI mark suitable for Openwell b. 50 lpm x 40 m

WS0266) Supplying and fixing of 5 HP three phase panel board D.O.L with two level guard and auto start

WS0162) Labour charges for the erection of three phase Upto 5 HP submersible pumpset in borewell / openwell

WS0265) Supplying and fixing of 3 HP three phase panel board D.O.L with two level guard and auto start

WS0277) Supplying and fixing of 2 HP three phase panel board D.O.L with two level guard and auto start

EL0349) Supply and delivery of 3 core 4 sq.mm flat type copper cable

WS0235) Supply and delivery of 12mm dia nylon rope of best appred quality.

WS0243) Supplying of following dia UPVC Column pipe for borewell a) 32mm dia UPVC Column Pipe

WS0023) Supplying, laying and jointing the following dia of UPVC Pipes below Ground Level a) 32mm dia UPVC pipe

WS0280) Supplying and fixing of following dia UPVC special with ISI mark a) 50mm dia UPVC Coupler

b) 50mm dia UPVC Elbow

c) 50mm dia UPVC Tee

d) 50mm x 40mm dia UPVC Reducer

WS0018) Supply and fixing of following dia GI/GM Specials of best approved quality, with ISI mark a) 50mm dia GI Union

b) 50mm dia GI Bend

WS0018.X.a) 50mm dia GM Non Return valve

WS0022) Supply and laying of following dia G.I pipes Below ground level a) 50mm dia GI Pipe

WS0021) Supply and laying of following dia G.I pipes Above ground level a) 32mm dia GI Pipe

b) 50mm dia GI Pipe

EL0290) Supplying and fixing of MS angle of size 50x50x5mm MS angle to hold LTUG cable in duct portion

MS0087) Geologist Survey Charges

RAMANAN (BID ID -1507635)

SATHIYANARAYANA CONSTRUCTIONS (BID ID -1507782)