REPAIR OF FLOORING, TILLING, PLASTERING AND OTHER MISC WORK OF WATER SUPPLY SUB STATION FOR AGE-I AREA UNDER AGE(I) (U) B/R DELHI CANTT-10

Amount

Demolition of cement concrete (unreinforced) in ground floors and paving n. exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 40 mm thick cement concrete in 1:3:6 type C1, using 20 mm graded stone aggregate as in floor finished even and fair complete all as specified and directed.

M&L for 20 -25 mm thick mirror polished kota stone, machin cut kota stone slab flooring over 20mm cement screed bed in cement mortar (1:4), and jointed in neat cement slurry mixed with pigment to match the shade of slab complete all as specified .

Dismantling floor, hearth or wall tiling including cement mortar bedding (incl backing), removing tiles and rubbish off the premises complete.

M&L for 20 -25 mm thick mirror polished kota stone, machin cut kota stone slab as in skirting, dado or in vertical surface including 15 mm thick cement mrtar in (1:4) and jointed in neat cement slurry mixed with pigment to match the shade of slab complete all as specified and directed.

Demolition of brick work built in cement mortar including all quions arches , pillar etc but excluding ashalar facing dressed stoen and pre-cast concrete articles.

M & L for brick work with old size sub class B well burnt straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) all as specified and directed.

Taking down shutters area exc 1.00 sqm but not exc 2.00 sqm and refixing in the same opening including edging, fixing hinges with screw etc as required complete all as specified and directed.

Taking down cement plaster, any description from brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for Rendering 10 mm thick on brick or concrete surfaces in cement mortar 1:6, finished even & smooth without using extra cement.

M&L for preparation of newly untreated plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer with alkali resistant priming paint complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work on concrete surfaces using water proofing compound @ 3% by weight of cement finished even and smooth without using extra cement complete all as specified and as directed. (Note : rate to be quoted by bidder inclusive WPC)

M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint over a coat of primer (chalk whiting ) complete all as specified and directed.

M&L for rendering 5 mm thick in cement mortar (1:3) on ceilling finish even and smooth without using extra cement complete all as spd and directed.

M&L for prepration of newly plastered surfaces on ceiling and applying three coats white wash complete all as specified and directed.

M&L for applying one coat white wash on old decorated ceiling surface including preparation of old surfaces & filling cracks and holes with wall cement based putty or cement morter 1:2 complete all as specified and directed.

M&L for applying one coat of cement base paint on old decorated wall surface including preparation of old surfaces & filling cracks and holes with white cement complete all as speciifed and directed.

M&L for applying one coat of oil emulsion distemper on old decorated wall surfaces including preparation of old surfaces & filling cracks and holes with white cement complete all as speciifed and directed.

Dismantling concrete posts or struts (wood,steel or R.C.C.) any section, icluding taking out embeded portion and making good disturbed ground by leveling ramming to true surface complete all as speciifed and directed.

S&F of concertina coil 600mm dia / 56 loopse / 2.5 mm core wire, Coil Diameter: 600 mm, Type of Strip: Heavy Galvanised (IS:1703), Type of Core wire: Heavy Galvanised (IS:280-2006), Core wire Diameter: 2.50 mm Dia, Zinc Coating to Strip: Minimum 200 GSM/sqmm, Zine Coating on wire: Minimum 275 GSM/sqmm (IS 6745-1972 reaffirmed 2006), Tensile Strength of wire 1400-1500 N /sqmm, Weight: 6-8 Kg (± 5%), Number of Loops: 56. Blade Length: 22 MM, Barb Profile: Medium Blade (MBBT), Distance Between Barb. 35 mm, Stretchable length 6-8 mtrs, Type of clip: Hardened Steelin Galvanised steel, complete all as specified & directed. Make : M/S Global Engg/M/S Special steels Ltd/M/S Super Fence or other equivalent make as approved by AGE(I).

Cutting holes into or through cement concrete slabs chajja copping and similar work reinforced or other wise superficial area exc 100 sqcm but not exc 250 sqcm each complete all as spd and directed.

M&L for PCC type B0 1:2:4 using 12.5mm graded stone aggregate, as in copings, filling in holes incl weathering , slightly rounded or chamfered or throating incl necessary form wok complete all as specified and directed.

S&F angle iron as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc and similar work conforming to FE -290 Gde E-165 complete all as specified and directed.

Dismantling of structural steel work including doors gates etc complete all as specified and directed.

S&F framed work such as grills, grating, iron gate and doors framed and hung as gates including pintle hinges, stops, hand made sliding bolt, handles etc complete all as specified and directed by EIC.

M&L for preparation of new steel / iron surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified & directed.

M/s Naresh Kumar Gupta & Co.

RIZCON

M/S GR construction compony

SURESH KUMAR SHARMA & CO