SPL REPAIRS TO BLDG BK-08 AND BK-11 INCLUDING PROVN OF 05 NOS SS SINK POINT IN COOK HOUSE IN OTM WITH WATER TANK IN BLDG NO 9-11A UNDER AGE B/R-II OF GE GOLCONDA

Amount

Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings etc complete all as specified and directed

Dismantling timber scantlings 40 Sq cm and over in section in any position in framed work complete all as specified and directed

M & L for 2nd class hard wood, clean sawn, in scantiling timber fixed with nails complete all as specified and directed

All as per Item No. 3 here in above but fixing only scantling obtain from No. 2 complete all as specified and directed

S&F rolled mild steel sections as in roof trusses, (framed), trussed purlins, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat section) including distance pieces, cleats confirming to Fe-410-W (grade E-250 quality 'A') complete all as specified and as directed.

M&L Pre painted galvalume aluminum zinc coating, GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre painted galvalume aluminum zinc coating, GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof coverings / cladding to wall, ridges, gutters etc., fixed with self tapping screws complete all as specified and directed.

Taking down cement plaster of any description and in any position of brick/concrete surfaces on walls / celing etc. including racking out joints, hacking for key, scrubbing down with water etc & prepared to receive new plaster and disposing off the rubbish off the premises of cantonment complete all as specified and directed.

M&L 15mm thick plastering in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L 10mm thick plastering in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement. complete all as specified and directed.

Demolition of brick work or stone masonary, built in cement mortar complete all as specified and directed.

M & L brick work with fly ash bricks built in CM 1:6 with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer on wall surfaces complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali-resiatant primer and 1.5 mm thick Birla wall care putty on plastered surrfaces complete all as specified and directed.

M&L for complete removal of old decorated surface of walls and applying two coats of oil bound distemper over a 1.5 mm thick Birla wall care putty complete all as specified and directed.

M&L for complete removal of old decorated surface of walls and applying two coats of cement base paint over a coat of alkali resistant primer on wall surfaces complete all as specified.

M & L preparation of new steel surfaces description over 10 cm in width or girth applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for one coat of synthetic enamel paint on old steel surfaces including preparation of surfaces complete all as specified and directed.

Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

M&L for hardcore using broken stone or boulders nexc 63mm deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

Demolition of Cement Concrete (Un reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc., laid, bedded and pointed in any mortar etc complete all as specified and directed.

M & L 75 mm thick PCC 1:4:8 Type D2 (using 40 mm graded stone aggregate) as in sub bases, floors and pavings etc complete all as specified and directed.

M & L 100 mm thick PCC 1:4:8 Type D2 (using 40 mm graded stone aggregate) as in sub bases, floors and pavings etc complete all as specified and directed.

M&L for chequered cement concrete tiles 300mm x 300mmx 25mm thick, set jointed and pointed in cement slurry in floors with grey cement and pigments including 15mm thick screed bed in CM 1:4 complete all as directed.

M&L Mirror Polished shahabad stone flooring with slab of thickness 20-25 mm, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over 20mm thick screed bed in CM 1:6 including grinding and polishing making smooth surface of floor complete all as specified and directed.

M&L Polished shahabad stone slabs on skirting/dado of thickness 20-25 mm set & jointed in meat cement slurry and pointed in white or coloured cement to match the shade over 10 mm thick backing coat in CM 1:3, including grinding and polishing making smooth surface of floor complete all as specified and directed.

S & F true horizontal level 600x600mm panels false ceiling system using hot dipped galavnized steel sections exposed surface with pre-coated capping,main tee of size 24x32mm at every 1200mm c/c and wall angle of size 19x19mm fixed to perimetre wall.The complete grid is to be suspended at every 1200mm internal at the main Tee using fine finished tagular edge including 8 mm thick Gypsum boards of size 600x600mm with rear side Aluminium fril and front side PVC lamination complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames) n exc. 1.5 sqm each and removing to or from store complete all as specified and directed.

Taking down shutters of any description n. exc. 1 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 sqm but n exc 4.00 each and removing to or from store complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm but n exc 2.00 sqm each complete all as specified and directed.

M&L 2nd class hard wood plain straight solid chowkats and frames wrought, framed, rounded, chamfered put together with glue pinned joints complete all as specified and directed.

S & F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts of size25x3MM MS flat; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe 290-0 complete all as specified and directed.

M&L for cement concrete 1:2:4 type B1 using 20mm graded stone aggregate in bed black for hold fasts and coping incl necessary form work weathering slightly rounded or chamfered angles and treating and making good the disturbed portion complete all as specified and directed.

M&L 2nd class hard wood plain framed factory made panel shutter 35 mm thick (two or three panels) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces, the size of rail & style as per IS 1003 (Part-I) Kiln seasoned and chemically pressure treated complete all as specified and directed.

S & F 35 mm thick IInd class hard wood factory made glazed and skelton shutters sizes of members as specified in SSR(Part-I) clause 8.20(a), open rebated and prepared to receive glass or gauge, divided into squares ,edges of framing plain, chamfered or rounded, fitted with cut and miterd beads or rebated sash bars for securing glass or gauge etc. complete all as specified and directed.

S&F 30 mm thick 2nd class hard wood glazed and skeleton shutter of divided into square, with plain chamfered or rounded metred and rebital sash bar any number and framing moulded windows, ventila-tors, etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24 (b) fitted to chowkats complete all as specified and directed.

S&F MS Butt hinges medium weight cold rolled of size 100mm complete all as specified and directed.

S&F MS barrel tower bolts of 200mm long stove enameled black with bright bolt complete all as specified and directed.

S&F MS pressed bow handle, oval type stove enameled black of size 150mm long complete all as specified and directed.

S&F mild steel sliding door bolts 300mm long plate stove enameled black with bright bolt not less than 12mm dia with and incl a minimum of 6 bolt and nut four on bolt plates and two on staple plate complete all as specified and directed.

S & F 300mm, ordinary Mild steel rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F MS Butt hinges medium weight cold rolled of size 75mm complete all as specified and directed.

S&F MS barrel tower bolts of 100 mm long stove enameled black with bright bolt complete all as specified and directed.

S&F MS pressed bow handle, oval type stove enameled black of size 100mm long complete all as specified and directed.

S&F mild steel wire type I, gate & shutter, hooks & eyes 150 mm size complete all as specified and directed.

S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of apreture 1.0 mm & fixed with stainless steel wire staples fixed complete all as specified and directed.

S & F 3mm thick sheet glass ordinary quality and glazing with wooden beads or oil putty in square not exc. 0.50 Sqm in each pane complete all as specified and directed.

M&L preparation of new surfaces of wood or wood based material description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S & F MS 25 mm dia Drapery curtain rods powder coated decorative type complete all as specified and directed.

S & F MS fancy powder coated brackets for 25 mm dia drapery curtain rods complete all as specified and directed.

Excavating in posts holes (or similar holes) in hard / dense soil each not exc 0.50 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm thick each layer watering, and removing surplus soil to a distance not exc 50 mtr away and making good the surface complete all as specified and directed.

M & L for PCC 1:2:4 type B-2 (using 40 mm graded crushed stone aggregates) as in foundations, fillings and mass concrete etc complete all as specified and as directed.

M & L for Machine cut kota stone slab 20-25mm thick including mirror polished as in shelves, platform etc including cutting groves in wall making good disturbed surface, matching with existing surface etc; rubbing and polishing including 20mm thich screed bed in CM (1:6) complete all as specified and directed

Material only for machine cut Cudappah stone slab of 20-25mm thick to fix below granite platform complete all as specified and directed.

M&L for Granite (of any type) work table rubbed and polished 20-25mm thick in steps, jambs, pillars, window-cills, cooking platforms, over 15mm thick screed bed in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc complete all as specified and as directed.

M & L for rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar works complete all as specified and as directed.

S & F for sinks matt finish anti scratch stainless steel without drainage board made out of stainless steel 1 mm thick kitchen or laboratory with ;plugs, washers, and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, and connecting union to pipe overall size 495 mm x 420 mm with bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S & F in repairs for 40mm Waste fittings, brass, chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement & others end fixed complete all as specified and directed.

S & F 32mm bore low density polyethelene pipes (LDPE) of pressure rating 6 Kg/Sqcm as in waste pipe etc complete all as specified and directed.

S&F fancy type bib tap 15 mm bore chromium plated, cast copper alloy, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F 16mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on wall/ ceiling complete all as specified and directed.

S&F CPVC ball valves with CPVC lever, screwed both ends to pipes of 16mm bore fixed complete all as specified and as directed.

S & F 110 MM PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F for glazed ceramic coloured tiles of size 300x450x7mm thick as in vertical surfaces in dado/skirtings set and jointed in neat cement slurry and pointed in white or coloured cement to match, fixed over and including10mm thick back coat in CM 1:4 complete all as specified and directed.

M & L brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or on concrete surfaces finished even and smooth (without using extra cement) including three coats of white wash on newly plastered surfaces of wall including preparation of surfaces complete all as specified and directed.

Taking out carefully copper/aluminium point wiring,Light,fan,socket or power complete with all fitting, fixtures such as switch socket out let, ceiling rose ,holder ,regulator,DBs etc including making good the disturbed surface of wall/floors complete all as specified and directed.

M&L Point wiring for one light point/fan point/bell point controlled by one switch with 1.5 sqmm multistrand copper conductor cable PVC (FRLS) insulated unsheathed copper conductor single core multi stand flexible cable and 1.50 sqmm PVC (FRLS) insulated unsheathed copper conductor single core cable ( green colour) as earth lead in and including PVC rigid conduit with all fittings for concealed type on stone / brick, masonary walls, roof etc including new CI/MS sunken box of required size and all as directed by Engineer-in-Charge & 3 mm thick plastic laminated sheet for housing switches sockets, regulators etc. including cutting/running chases, pinning in and making good the disturbed surfaces to match with the existing specification, complete all as specified and directed.

All as per ser item No.71 here in before but for one 3 pin socket outlet 5 Amp independent.

All as per ser item No.71 here in before but for one 3 pin socket outlet 5 Amp on same board.

All as per item No. 71 but for One 3 pin 15 Amps switch socket outlet point on independent board with 2.5 sqmm PVC (FRLS) insulated unsheathed copper conductor single core multi stand flexible cable and 2.5 sqmm PVC (FRLS) insulated unsheathed copper conductor single core cable (green colour) as earth lead complete all as specified and directed.

M&L switch piano flush type single pole one way 5 Amps complete all as specified and directed.

Supply and fix Switch socket outlet combination universal type, 2 in 1, 3 pin 5 Amp, piano flush type, 240 volts, complete all as specified and as directed

Supply and fix Switch socket outlet combination universal type, 2 in 1, 3 pin 5 and 15 Amp, piano flush type, 240 volts, complete all as specified and as directed

Supply and fix Ceiling rose surface bakelite three terminal / PVC /Polycarbonate / isolated body 65x50 mm, terminals 240 volts complete, all as specified and directed.

Supply and fix lamp holder insulated body with back plate suitable for battern fittings complete all as specified and directed.

Supply and fix electronic fan regulator stepped type with five step 240 volts suitable for 1200/1400 mm sweep AC ceiling fan complete all as specified and directed.

Supply and fix LED lights fitting 1x 22W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. complete all as specified and directed.

Supply and fix 25W energy saving and environmental friendly long life LED building security street light made up of pressure die cast aluminium housing with high power LED, lens & toughened glass, potted driver, IP 66 protection including connection with twin twisted unsheathed PVC copper cable of suitable size alongwith suitable brackets with clamps, nuts and bolts complete all as specified and directed.

S&F 9/10 W LED bulb of base B22d with color temp 6500K all as specified and directed.

Supply and fix Sheet metal enclosure IP-43 double door for DBs(where MCBs are reqd) SPN 240 V, for 08 ways, complete all as specified and directed.

Supply and fix 'C' Series, MCB SP 06 to 32 Amp, 240 volts complete all as specified and directed

Supply and fix 'C' Series, MCB SPN 32 Amp, 240 volts 50Hz AC supply, complete all specified and directed

Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge o the plate not less1.5 mtrs below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts nuts, check nuts and washers of galvanized iron of steel all as shown in electrical plate No.3 connected to earthing test point incl necessary earth work, excavation PCC 1:3:6 type CI using 20mm graded stone aggregate for earth chamber provn of PCC cover 40 mm thick 1:2:4 mm type B1 funnel with water Pipe, GI pipe, 15mm dia medium grade protection pipe, GI earth lead complete all as specified and directed.

M&L Sub main wiring with 6 Sqmm (Nominal area) with two runs (Red for phase and Black for neutral) of single core, PVC insulated, multistranded, unsheathed, FRLS copper conductor cables 1100 V grade drawn through and including PVC casing caping of adequate size but not less than 25mm width including 6 sqmm (nominal area) single core, PVC insulated, multistranded, unsheathed, FRLS copper conductor green in colour as earth wire and duly connected to earth point complete as specified and directed including taking down old sub main wiring. Note- One run PVC casing caping, two runs main cable and one run of earth wire shall be measured as one unit length.

Supply and fix 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular stranded conductor of 10 Sqmm including house service bracket complete all as specified and directed.

Taking down fan, cealing cable end, dismantling blades and removing fan and blades to store complete all as specifed and directed.

M & L for Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. complete all as specified and directed

Hanging/Fixing of ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed

Taking out defective winding and rewinding of the ceiling fan of any sweep complete with equivalent new super enamelled copper wire as per existing gauge and weight as per manufacturer's design and instructions including varnishing of ceiling fan, replacing defective bearings and capacitors of any make and any sweep complete all as specified and directed

DWARKA PERSHAD RADHEY RAMANLAL

JPR INFRATECH

Maruti Construction Co.

M/s Bhavani Constructions

harshraj and co

M/s cogent constructions

BUILDWEL