WBPWDTE/AE/BMCESD/NIQ-26/Q of 2025-2026

Amount

Dismantelling of Existing EI works Such as Wirings ,Electrical Fittings , Ceiling Fans , Old Main Switch , Old PDB ,LDB , Old Exhaust fans as necessary and other damaged items during reconstruction works of Civil Department.

Dismantling steel tubular/Rail/Strut embedded in CC foundation incl. excavation, filling of holes, restoring surface, loading at site and delivering, unloading, sorting, stacking properly at any place as per direction upto a lead of 1.6 km ( Hostel campus)

Servicing of Exhauust Fan Including Proper Washing with Kerosene , Soap Water , Replacement of Bearings , Greasing , and Refixing to the original Position.( Only those Exhaust which are in running Condition.

Supply & Fixing 240 V, 6A, plug socket with separate 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supply and Delivery of 230 V, 50 Hz ,10 W Bulk Head Light fitting with in built LED module Compact modern Design utility( Similar to Crompton C/S-306-10-57-SL-DP-NBK Or any similar make ) compatable for ceiling and wall fixing . Make. Crompton/ Bajaj/Orient or any reputed brand as recognised by EIC. ( toilet/ back stair)

Fixing only bulk head ceiling fitting on wall /ceiling by screws etc.

Lowering & refixing only ceiling fan complete with blades , canopy, fork, rubber bush etc. incl. making necessary disconnection & connection as required.

Supply & installation of ceiling fan safety wire within down rod with necessary length as per required with nnecessary clamp nut bolt etc. [ providing safety wire]

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. ***( Additional Fixing considered for replacement of wooden block type Tube fitting from Ladies Hostel new building )***

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish. (Average run 8 mtr) [ corrtidoor portion of old ladies hostel]

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. (Make: Legrand/Scheieder/Semens/L & T) 2+8 Way

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment (4 way) Legrand/ L&T/ SCHNIEDER [ new ladies hostel]

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection 6-32 Amps , SP

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection. 40 A , DP

Supply & fixing compression type cable gland complete with brass gland, brass ring& rubber ring for dust & moisture proof entry of xlpe /pvc armoured cables as below. 2 core 10 sqmm

4 core 35 sqmm

Finishing of the XLPE/ PVC insulated armoured cable ends by CRIMPING methode incl.supply & fixing solderless sockets ( Dowels socket ) , tapes anticorrosive paste & jointing materials. 2 core 10 sqmm

4 core 35 sqmm

Supply n& fixing CRC sheet metal ( 16 SWG ) JB -CUM- Switch board of the following sizes complete with three no suitable size copper bar with holes ( for Ph, N, E) fixed on bakelite / hard rubber insulator over the MS welded chairs incl. bakelite/perpex/coloured perpex ( wall matching colour ) top cover 3 mm thick flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting & mending good damages to building works. 200x150x65 mm

Supply & Fixing bakelite / perspex top cover on existing switch board by Brass screws after making housing for switch by cutting bakelite / perspex cover and making necessary connections as required. 175 mm x 100 mm x 65 mm

100 mm x 100 mm x 65 mm

Supply Delivery and Fixing 6A Piano key type switch.

Supply Delivery and Fixing on existing position 230 V , 50 Hz , 50 W , LED Bright White type Flood Light . IP 67 Rating or above , Make :- Phillips , Crompton , Havelles. (Cat No. BVP 173 LED SSCU/ NW/WW 50 W FG GR PSU)

Painting of any steel/ iron surface with no. of coats of paints as given below with ready mixed paint/primer of approved make and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint ( Painting old Down Rod of Tube Fitting ) 1st coat of synthetic enamel paint over the primer

Providing CC (6:3:1) muffing 600x600x760 mm in size or equivalent size of cylindrical muffing above ground level around the pole base complete with 3 mm thick neatly finished cement plaster all round after dismantling the unserviceable muffing if necessary Without Loop Box

Fixing only Floodlight Fitting with suitable tie clamps and MS plate for mounting on Pole/Tower or similar structure.

GANGA ELECTRIC (BID ID -7820187)

TITHI ELECTRONICS (BID ID -7808362)