Dismantling and Construction of Community Centre at Sector 19, Panchkula. Recall

Amount

Supplying, unloading, storing of following sizes XLPE insulated (Heavy duty) Aluminium conductor cables suitable for working voltage upto and including 1100 Volts . Test report of cable to be submitted by the contractor at the time of delivery of material at site. 4 Core 16 sqmm Armoured Cable

Supply of LED street light fitting 45 Watt made up of pressure die cast aluminum housing with toughened glass and high power LED`s with IP 65 protection efficacy ) 110 LPW,50000 working hours complete in all respect up to the entire satisfaction Engineer-in-Charge. Make Crompton - LSTS-45-CDM, Harvell`s - JETA-Endura Pearl Neo-SL45 W/ Bajaj- ENXT P54L-WHCRPCSD, Phillips- BRPO52 LED-045 CW SLMRFGSIPSUGR , Surya

Supply and testing of aluminium conductor XLPE/P.V.C. insulated armoured and served cable as per requirement at the site of work upto entire satisfaction of the Engineer-in-charge.:- (Make Polycab / KEI / Havells 6sq.mm 4Core

Supply and testing of aluminium conductor XLPE/P.V.C. insulated armoured and served cable as per requirement at the site of work upto entire satisfaction of the Engineer-in-charge.:- (Make Polycab / KEI / Havells 10sq.mm 4Core

Supply and testing of aluminium conductor XLPE/P.V.C. insulated armoured and served cable as per requirement at the site of work upto entire satisfaction of the Engineer-in-charge.:- (Make Polycab / KEI / Havells 16sq.mm 4Core

Supply and testing of aluminium conductor XLPE/P.V.C. insulated armoured and served cable as per requirement at the site of work upto entire satisfaction of the Engineer-in-charge.:- (Make Polycab / KEI / Havells 25sq.mm 4Core

Supply and testing of aluminium conductor XLPE/P.V.C. insulated armoured and served cable as per requirement at the site of work upto entire satisfaction of the Engineer-in-charge.:- (Make Polycab / KEI / Havells 35sq.mm 3.5Core

Supply and testing of aluminium conductor XLPE/P.V.C. insulated armoured and served cable as per requirement at the site of work upto entire satisfaction of the Engineer-in-charge.:- (Make Polycab / KEI / Havells 50sq.mm 3.5Core

Supply and testing of aluminium conductor XLPE/P.V.C. insulated armoured and served cable as per requirement at the site of work upto entire satisfaction of the Engineer-in-charge.:- (Make Polycab / KEI / Havells 120sq.mm 3.5Core

Supplying, installation, testing and commissioning of suitable size GI box 4-Module with modular plate and cover in front on surface or in recess including providing and fixing 25A motor starter outlet and 25 A modular socket and G.I. Box including connections,painting etc. as required for A.C. point.

Supply of IP20/ IK02 surface/Suspended LED linear channel made of complete Extrusion AI housing with single piece extruded polycarbonate diffuser LED used shall be SMD type and fixture should have minimum efficacy at system level (Not Chip level) )=100lumens/watt with minimum system Lumens 2200 with maximum system wattage of 22W. Life of fixture (Including Driver) : 50000 burning Hrs. @ L70 Lumen maintenance, CCT of 6500K (SDCM(5), CRI )80, PF)0.95, Min working temp range - 0°C( Ta ( 45°C, and operating voltage range of 140-270 VAC. it should has a minimum internal Surge Protection of 4.0KV. The fixture design should comply with EMC / EMI complaince along with BIS certification for LED Luminaire, catalogue number of fixture offered must be mentioned in BIS certificate submitted. Luminaire manufacture shall provide LM79 report from NABL accredited lab and LM80 report issued by LED manufacturer. Similar to Philips SP780 Pureline Slim Channel/ LT/Trilux

Supply of LED 4ft Functional Batten maximun system wattage of 18W with a nominal system lumen output of 2000 lumens and a minimum system efficacy of 110 lm/W. Rated system lifetime of 50,000 burning hours at L70. The luminaire should have a color temperature of 6500K and CRI)80. The luminaire shall meet IP20 rating with THD ( 10% and PF)0.95. The luminaire housing should made of extrusion aluminium with polycarbonate diffuser. The fixture should be with BIS certification for LED Luminaire, catalogue number of fixture offered must be mentioned in BIS certificate submitted. Luminaire manufacture shall provide LM79report from NABL accredited lab and LM80 report issued by LED manufacturer. Similar to Philips BN170 LED20//LT/Trilux

Supply of Surface LED batten IP20 2ft made of Aluminum extrusion housing with high efficiency polycarbonate di fuser, LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level) )=100lumens/watt with Minimum system Lumens 1200 with maximum input power of 12 Watt. Life of fixture (Including Driver): 25000 burning Hrs. @ L70B50, CRI )80, PF)0.9, an operating Voltage Range of 140-270 VAC. the fixture design should comply with EMC/EMI compliance along with BIS certification for LED Luminaire. Luminaire manufacture shall provide 179report from NABL accredited lab and LM80 report issued by LED manufacturer. Similar to Philips/LT/Trilux

Supply of LED 4ft Functional Batten maximum system wattage of 36W with a nominal system lumen output of 4000 lumens and a minimum system efficacy of 110 lm/W. The lifetime of 50,000 burning hours at L70. The luminaire should have a color temperature of 6500K and CRI)-80. The luminaire shall meet IP20 rating with THD ( 10% and PF)0.95. The luminaire housing should made of extrusion aluminium with polycarbonate diffuser. The fixture should be with BIS certification for LED Luminaire, catalogue number of fixture offered must be mentioned in BIS certificate submitted. Luminaire manufacture shall provide LM79report from NABL accredited lab and LM80 report issued by LED manufacturer. Similar to Philips BN170 LED40/LT/Trilux

Supply of 10W and 1100lms LED Bulkhead fitting, housing made up of pressure die cast Aluminum with polycarbonate diffuer. Fixture protection of IP66/IK09. THD(10%, PF)0.95 and 2.5KV surge protection.

Supply of IP20 Surface/Recesses LED Downlighter made of pressure die cast aluminum Housing and polycarbonate diffuser LED Used shall be SMD type and fixture should have minimum efficacy at Systemlevel (Not Chip Level) )=110lumens/watt with Minimum system Lumens 2000 with maximum system wattage of 18W. Life of fixture (Including Driver) : 50000 burning Hrs. @ L70B50 Lumen maintenance, CCT of 6500K (SDCM(5), CRI )80, PF )0.95, Min working temp range - 0°C ( Ta ( 45°C, and operating Voltage Range of 130 - 320 VAC. it should has a Minimum Internal Surge Protection of 2.5KV. The fixture design should comply with EMC / EMI compliance along with BIS certification for LED Luminaire, catalogue number of fixture offered must be mentioned in BIS certificate submitted. Luminaire manufacture shall provide LM79report from NABL accredited lab and LM80 report issued by LED manufacturer. Similar to Philips DN296B LED20S with Surface Mounting Kit or similar to LT/Trilux

Supply of LED Asymetric beam (55deg)Sports Flood light, housing made up of Pressure Die Cast Housing / Anti Dust Exposed Lens optics and embossed brand name/logo name of manufacturer. The fixture should have a minimum system efficacy of 120 lumen/Watt and a minimum system lumen output of 18500 lumens and maximum system wattage of 155 Watts.The fixture shall have a CRI of minimum 70 , SDCM(5. The fixture shall be designed for a system life of L70B50 @ 50K Hrs.@ 35 Degree Ambient, lumen maintenance. Ingress Protection of IP66 (lamp and gear Compartment) and Mechanical Impact Resistance Rating of IK )=08.The fixture driver should have an operating voltage range of 120-277 V, surge protection of 4KV Internal and 10KV External, PF )0.9 and THD(10% at full load. Driver protection 440V (P2P)Protection for 8 Hrs. The fixture design should be with BIS certification for LED Luminaire, catalogue number of fixture offered must be mentioned in BIS certificate submitted. Luminaire manufacture shall provide LM79report from NABL accredited lab and LM80 report issued by LED manufacturer. Similar to Philips BVP483 LED185 CW AMB PSU GR or similar to LT/Trilux

Supply of 25W LED round LED post top light fixture suitable for mounting on 3-4mtr pole, housing made up of High-quality Pressure die-cast aluminum housing LM6 alloy (Excellent corrosion resistance and robustness) with UV protected Polycarbonate cover comes with IK08 protection, sturdiness and embossed brand name/logo name of manufacturer. The fixture should have high power LED with minimum system efficacy of 115 lumen/Watt and a minimum system lumen output of2800 lumens, CCT of 5700K and CRI 70, PF )0.95 and THD(10%. The fixture and LED Driver shall be designed for a system life of 50,000 hours @70% lumen maintenance. Ingress Protection of IP66 (lamp and gear Compartment) and Mechanical Impact Resistance Rating of IK10.The fixture driver should have an operating voltage range of 120-270V with Auto Restart, High Cut off ( )325V), Auto Restart, surge protection of )=4KV Internal. Fixture and LED driver should be of same make. LED Fixture and LED Driver must have BIS. Luminaire manufacture shall provide LM79 report from NABL/UL accredited lab. Similar to Philips BGP300 LED28 730 PSU PC IN S1 or similar to LT/Trilux

Supply of 21W LED Solar All in one Street light fixture , housing made up of High-quality extrusion aluminum housing corrosion resistance and robustness) with UV protected Polycarbonate cover comes with IK08 protection, sturdiness and embossed brand name/logo name of manufacturer. The fixture should have high power LED with minimum system efficacy of 140 lumen/Watt and a minimum system lumen output of3000 lumens, CCT of 5700K and CRI 70, PF )0.95 and THD(10%. The fixture and LED Driver shall be designed for a system life of 50,000 hours @70% lumen maintenance. Ingress Protection of IP65 (lamp and gear Compartment) and Mechanical Impact Resistance Rating of IK08.The fixture to be with built in MPPT charger with efficiency )90% and must be fitted with dry LiFePo battery. must ensure 2dats backup Fixture and LED driver should be of same make. LED Fixture and LED Driver must have BIS. Luminaire manufacture shall provide LM79 report from NABL/UL accredited lab. Similar to Philips BRP111 LED30/757 M or similar to LT/Trilux

Supply of 2W Anthracite LED Recessed Step Light

Supply of 6.5W and 700lms LED Surface fitting, housing made up of pressure die cast Aluminum with polycarbonate diffuer. Fixture protection of IP65/IK07. THD(20%, PF)0.95 and 2.5KV surge protection.

Supply of LED BED LIGHT 15 WATT .

Supply, Installation, Testing and Commissioning, of wall fan 300 mm (ISI mark) including cost of petty material required to complete the job in all respect. (Make Crompton, Havells or anchar panasonic)

Supply of IP20 Surface/Recesses LED Downlighter made of pressure die cast aluminum Housing and polycarbonate diffuser LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level) )=110lumens/watt with Minimum system Lumens 1200 with maximum system wattage of 11W. Life of fixture (Including Driver) : 50000 burning Hrs. @ L70B50 Lumen maintenance, CCT of 6500K (SDCM(5), CRI )80, PF )0.95, Min working temp range - 0°C ( Ta ( 45°C, and operating Voltage Range of 130 - 320 VAC. it should has a Minimum Internal Surge Protection of 2.5KV. The fixture design should comply with EMC / EMI compliance along with BIS certification for LED Luminaire, catalogue number of fixture offered must be mentioned in BIS certificate submitted. Luminaire manufacture shall provide LM79report from NABL accredited lab and LM80 report issued by LED manufacturer. Similar to Philips DN296B LED12S with Surface Mounting Kit or similar to LT/Trilux

Supply of IP20 Surface/Recesses LED Downlighter made of pressure die cast aluminum Housing and polycarbonate diffuser LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level) )=110lumens /watt with Minimum system Lumens 1500 with maximum system wattage of 14W. Life of fixture (Including Driver) : 50000 burning Hrs. @ L70B50 Lumen maintenance, CCT of 6500K (SDCM(5), CRI )80, PF )0.95, Min working temp range - 0°C ( Ta ( 45°C, and operating Voltage Range of 130 - 320 VAC. it should has a Minimum Internal Surge Protection of 2.5KV. The fixture design should comply with EMC / EMI compliance along with BIS certification for LED Luminaire, catalogue number of fixture offered must be mentioned in BIS certificate submitted. Luminaire manufacture shall provide LM79report from NABL accredited lab and LM80 report issued by LED manufacturer. Similar to Philips DN296B LED15S with Surface Mounting Kit or similar to LT/Trilux

Supply of IP20/IK02 Surface/Recesses LED 2X2 panel made of complete CRCA housing and polycarbonate diffuser LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level) )=120lumens/watt with Minimum system Lumens 3600 with maximum system wattage of 30W. Life of fixture (Including Driver) : 50000 burning Hrs. @ L70 Lumen maintenance, CCT of 6500K (SDCM(5), CRI )80, PF )0.95, Min working temp range - 0°C ( Ta ( 45°C, and operating Voltage Range of 140 - 270 VAC. it should has a Minimum Internal Surge Protection of 4.0KV. The fixture design should comply with EMC / EMI compliance along with BIS certification for LED Luminaire, catalogue number of fixture offered must be mentioned in BIS certificate submitted. Luminaire manufacture shall provide LM79report from NABL accredited lab and LM80 report issued by LED manufacturer. Similar to Philips RC380B LED36S /LT/Trilux

Supplying and Placing Modular table in completely knock down conditions with an overall size 1650mm X 1650mm X 750mm that is to be assembled at site. The construction of the main table shall be free standing structure constructed with the help of minifix dowels and pins. The work top shall have the size 1650mm X 750mm made up of 25mm thick particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The table top profile shall be in rectangle shape with front and back full round post form and other edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The table top shall be supported over particle board base gable end. The end wall of the table on the side shall be topped by gable end. The gable end shall be made up of 25mm thick particle board and profile shall be in linear shape with front and back full round post form and other edge with appropriate PVC edge banding. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. It should be 18mm thick pre-laminated particle board with appropriate PVC edge banding connected with both end. There shall be buffers provided at the base to avoid scratches on the floor. The table shall be supplied with side unit for storage purpose with an overall size 900mm X 450mm X 750mm. The side unit shall be made up of Pre-laminated particle board of grade II of IS 12823 with top 25mm thick and other parts 18mm thick like shutter, back, side panel etc. It shall have 2 sliding shutter which slides over sliding rail track. The shutter shall be operated with the assistance of SS handle and Multi-purpose (MP) locking mechanism. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom. A mobile pedestal shall be provided with an overall size 400mm X 450mm X 680mm. The pedestal shall be made up of Pre-laminated particle board of grade II of IS 12823. Pedestal side, back, top, facia shall be 18mm thick and drawer base shall be 9mm thick. The pedestal shall have 3 nos. of drawer i.e. 2 box drawer and 1 filing drawer. The drawer shall be operated with SS handle and easily close and open with the assistance of roller channel and ball bearing channel having to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key. The pedestal shall be mounted over 50mm injection moulded nylon castor. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007 issued by NABCB accrited Labs, BIFMA membership, Green Guard from UL and AIOTA certification. The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380.

Supplying and placing storage unit with an overall size 900mm X 450mm X 2100mm. It should be made up of Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. All profile i.e. side, back, top, shutter, shelf, skirting shall be 18mm thick. The edges shall be sealed with thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The storage shall have four fixed shelf. 2 nos. of door shutters shall be provided for opening and closing the storage operated with concealed crank hinge and SS handle. There shall be buffers provided at the bottom to avoid scratches on the floor. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007, BIFMA membership and AIOTA certification. The boards used should meet international standards of quality and safety, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of elasticity bending tested as per IS 2380.

Supplying and placing ergonomically designed, comfortable and aesthetically appealing High back chair. The seat shall be made of 15mm thick hot pressed curved plywood upholstered with high resilience polyurethane foam 50mm thick having density 40kg/m³ with khaki leatherite tapestry 0.8mm thick and 535 GSM and the back shall be supported by metal insert MS CRCA frame upholstered with high resilience polyurethane foam 12mm thick having density 23kg/m³ with khaki leatherite tapestry 0.8mm thick and 535 GSM with contoured lumbar support which helps to provide full back support and maintain the natural curvature of the spine. Headrest shall be provided for comfort of head with leatherite tapestry. The armrest shall be used MS CRCA chrome plated with PU arm completely joint with seat and back. The chair shall have knee tilt 360 degree revolving mechanism with four position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height upto 100mm with BIFMA standard class-3 gaslift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The Pedestal shall be made up of MS CRCA chrome plated having pitch circle Dia 640 mm fitted with 5 nos. 50mm twin wheel castors which shall be made of injection moulded black nylon 30% glass filled having self lubricating property for friction free movemen with BIFMA standards. The Seat size shall be 485±10 mm(W)X520±10 mm(D) and back size shall be 740±10 mm(H) from seat, overall height = 1150±10 mm and overall depth/width= 740±10mm.

Providing and supplying a visitor chair with ergonomic design for user comfort and shall have aesthetically appealing. The seat shall be made of 15mm thick hot pressed commercial plywood and the back shall be supplied with metal pipe, inserted between backrest. The chair shall be padded with high resilience polyurethane foam 50mm thick having density 40kg/m³ in seat and 12mm thick having density 23Kg/m³ in back. The seat and back shall be upholstered with leatherite tapestry 0.8±0.1mm thick, 535 GSM and breathable mesh tapestry behind the backrest. MS chrome plated pipe frame shall be provided on both side of seat and back with size 25mm X 10mm. The backrest shall be supplied by keeping the natural curvature of the spine which helps to provide back support. The armrest shall be used black integral polyurethane arm mounted on CRCA chrome plated pipe having size 40mm X 10mm completely joint with seat and back with the assistance of Allen key screw. Chrome plated round bend pipe of dia. 9mm shall be provided behind the backrest of the chair and welded with main frame. The frame structure shall be cantilever support type made of MS CRCA chrome plated round pipe of dia. 25.4mm with 2mm thick. There shall be PPCP shoe provided at the base to avoid scratches on the floor. The seat size shall be 500±10 mm(W) X 510±10 mm(D) and back size shall be 450±10 mm(W) X 540±10 mm(H) from seat and overall height = 980±10 mm, overall width = 560±10 mm.

Supplying and Placing Max chair without arm. The seat and back shall be made of MS CRCA powder coated perforated sheet of 1.2mm thick. The seat and back shall be fixed with metal frame. The frame structure shall be fixed cantilever support type made up of MS CRCA powder coated with 50-60µ (DFT) round pipe of Dia 20mm with 2mm thick. There shall be PPCP shoe provided at the base to avoid scratches on the floor. The seat size shall be 425±10 mm(D) X 445±10 mm(W) and back size shall be 455±10 mm(W) X 410±10 mm(H) from seat. Overall height shall be = 770±10 mm, overall depth = 595±10 mm and overall width = 545±10 mm

Supplying and placing single bed with an overall size 2060mm (L) x 1131 (B) x 930mm (H). Bed shall be made of 18mm thick Pre laminated particle board with 2mm thick PVC edge banding . The edge banding shall be pasted with hot melt glue at 200 degree Celsius. Mattress panel shall be made of 18 mm thick particle board. The understructure shall consist of MS channles in 1mmm thickness. Horizontal and Bottom Plinth shall be made of 25mm thick Pre laminated particle board.

Supplying and Placing conference table in completely knock down conditions with an overall size 3000mm X 1200mm X 750mm that is to be assembled at site. The table top shall be made up of back to back 25mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The table top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The worktop shall be supplied with flapper box which have several components for electrical, data and telephone cables having adequate capability of both the vertical and horizontal wire movements. The raceway or metal wire carrier shall be situated below the worktop as per requirement of inlaying the electrical management and carrying the wire horizontally. The end wall of the table on the side shall be topped by gable end. The gable end shall be made up of 25mm thick Pre-laminated particle board and profile shall be in linear shape with appropriate PVC edge banding. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. The modesty panel shall be 18mm thick pre-laminated particle board with appropriate PVC edge banding connected with both end. The table shall be supported over SS pipe leg of 202 grade. It shall have cross-section area 80mm X 20mm. There shall be buffers provided to avoid scratches on the floor. The table connections have to be made in such a way that no gap should be seen in between. The manufacturer shall have quality and safety assurance like ISO-9001:2015, ISO-14001:2015 and ISO-18001:2007 issued by NABCB accrited Labs, BIFMA membership, Green Guard from UL and AIOTA certification. The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380.

Supplying and placing corner table with an overall size 600mm X 600mm X 450mm. The top of the table shall be made of 18mm thick Pre-laminated particle board of grade II of IS 12823. The top profile shall be in square shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The understructure shall consist of SS 202 grade pipe frame with shiny chrome finish with an overall size the size 40mm X 20mm with 1.6mm thick. One nos. footstep shall be provided between the frame with same size i.e. 40mm X 20mm. There shall be PPCP shoe provided at the bottom to avoid scratches on the floor. The offered Product should be Green Pro Certified.

Supplying and placing study table with an overall size 1200mm X 600mm X 7500mm. The top of the table shall be made of 18mm thick Pre-laminated particle board of grade II of IS 12823. The top profile shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. The offered Product should be Green Pro Certified. The understructure shall consist of SS 202 grade pipe frame with shiny chrome finish with an overall size the size 40mm X 20mm with 1.6mm thick. One nos. footstep shall be provided between the frame with same size i.e. 40mm X 20mm. There shall be PPCP shoe provided at the bottom to avoid scratches on the floor.

Providing and supplying mid back chair. The seat shall be made of 15mm thick hot pressed commercial plywood padded with high resilience polyurethane foam having density 40kg/m³ and the back shall be made of metal insert MS frame padded with high resilience polyurethane foam having density 32kg/m³. The same shall be upholstered with leatherite tapestry 1mm thick and 571 GSM. The backrest of the chair shall be made by keeping the natural curvature of the spine with lumbar support. The seat and back shall be arrested together with powder coated HR steel spine and the armrest shall be used fixed PP arm completely joint with seat. For seating duraility the chair shall have synchro tilt 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 65mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standard. The pedestal should have five legged injection moulded in 30% glass filled black nylon having pitch circle Dia. 700 mm fitted with 5 nos. twin wheel castor. The castor of the chair should be injection moulded in black nylon 30% glass filled, confirming to ANSI/BIFMA X5.1-2011 standard tested to perform 98,000 cycles with 250lbs load. The offered Product should be Green Pro Certified. The seat size shall be 440±10 mm (D) X 465±10 mm (W) and back size shall be 440±10 mm (W) X 480±10 mm (H) from seat. Overall height shall be = 950±10 mm, base width/ depth = 760±10 mm.

Providing and supplying high back chair. The seat shall be made of 15mm thick hot pressed commercial plywood padded with high resilience polyurethane foam having density 40kg/m³ and the back shall be made of metal insert MS frame padded with high resilience polyurethane foam having density 32kg/m³. The same shall be upholstered with leatherite tapestry 1mm thick and 571 GSM. The backrest of the chair shall be made by keeping the natural curvature of the spine with lumbar support. The seat and back shall be arrested together with powder coated HR steel spine and the armrest shall be used fixed PP arm completely joint with seat. For seating duraility the chair shall have synchro tilt 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 65mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standard. The pedestal should have five legged injection moulded in 30% glass filled black nylon having pitch circle Dia. 700 mm fitted with 5 nos. twin wheel castor. The castor of the chair should be injection moulded in black nylon 30% glass filled, confirming to ANSI/BIFMA X5.1-2011 standard tested to perform 798,000 cycles with 250lbs load. The offered Product should be Green Pro Certified. The seat size shall be 490±10 mm (D) X 490±10 mm (W) and back size shall be 440±10 mm (W) X 580±10 mm (H) from seat. Overall height shall be = 1070±10 mm, base width/ depth = 760±10 mm.

DSR 17.2.4 Supplying, installation, testing and commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required.

DSR 17.2.7 Supplying, installation, testing and commissioning of fault isolator complete with base as required.

DSR 17.2.9 Supplying, installation, testing and commissioning of intelligent addressable thermal detector with rate of rise cum fixed tempreature thermistor complete with base as required

DSR 17.2.10 Supplying, installation, testing and commissioning of addressable fire control module complete as required.

DSR 17.2.14 Supplying, installation, testing and commissioning of addressable manual call point complete as required

DSR 17.2.15 Supplying, installation, testing and commissioning of addressable horn cum strobe complete as required.

It is required to add this item, as this item is not including in the HSR 2023

DSR 3.2 `Supplying, installation, testing and commissioning of ELECTRIC MOTOR DRIVEN main fire pump suitable for automatic operation and consisting for the following complete in all respect as required. a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body and bronze impeller with stainless shaft, mechanical seal to ensure a minimum pressure of 3.5 Kg/sqcm at highest and fastest outlet at a specified flow of 1620 lpm at 56 m head confirming to IS:1520 b)40 HP for pump of 1620 lpm at 56 m Head SQ cage induction motor, TEFC synchronous speed 1500 RPM, suitable for operation on 415 Volts, 3 phase 50 Hz AC with IP55 protection for enclose, horizontal, foot mounted type with class F insulation, conforming to IS-3245. c) MS fabricated common base plate, coupling guard, foundation bolts etc as required. d) Suitable cement concrete foundation duly plastered with anti vibration pads.`

DSR 2.9 `Supplying, installation, testing and commissioning Diesel Engine driven main fire pump suitable for automatic operation and consisting of the following complete in all respects as required. A) Horizontal type multistage, centrifugal split casing pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure 3.5 Kg per sqcm at highest and fastest outlet at a specified flow of 1620 LPM at 56 Mtr head conforming to IS 1520. b) Suitable HP 1500 RMP Water-cooled with readytorm diesel engine conforming to relevant BD and IS standard complete with auto starting mechanism 12 / 24 volt electric starting equipment diesel tank exhaust pipe extended upto 1 mtr outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per specification stop in the event of fault with audio indication, painted with post office red colour as required. c) MS fabricated common base plate, coupling, coupling guard, foundation bolts as required. d) Suitable cement concrete foundation duly plastered with anti vibration pads.`

DSR 1.9 `Supplying, installation, testing and commissioning of ELECTRIC MOTOR DRIVEN main fire pump suitable for automatic operation and consisting for the following complete in all respect as required. a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body and bronze impeller with stainless shaft, mechanical seal to ensure a minimum pressure of 3.5 Kg/sqcm at highest and fastest outlet at a specified flow of 1620 lpm at 56 m head confirming to IS:1520 b)40 HP for pump of 1620 lpm at 56 m Head SQ cage induction motor, TEFC synchronous speed 1500 RPM, suitable for operation on 415 Volts, 3 phase 50 Hz AC with IP55 protection for enclose, horizontal, foot mounted type with class F insulation, conforming to IS-3245. c) MS fabricated common base plate, coupling guard, foundation bolts etc as required. d) Suitable cement concrete foundation duly plastered with anti vibration pads.`

DSR (WET) 6.1 Providing laying, testing and commissioning of `C` class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation and providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. 200 mm. dia (wall thickness = 6.3 mm)

DSR (WET) 6.2 Providing laying, testing and commissioning of `C` class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation and providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. 150 mm. Dia

DSR (WET) 7.7 Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 100 mm dia

DSR (WET) 7.8 Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 150 mm dia

DSR (WET) 8.1 Providing, laying, testing and commissioning of `B` class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 25 mm

DSR (WET) 8.3 Providing, laying, testing and commissioning of `B` class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 40 mm

DSR (WET) 8.2 Providing, laying, testing and commissioning of `B` class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 32 mm

DSR (WET) 8.4 Providing, laying, testing and commissioning of `B` class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 50 mm

DSR (WET) 8.7 Providing, laying, testing and commissioning of `B` class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 100 mm

DSR (WET) 9.1 Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Gunmetal

DSR (WET) 18.1 Supplying and fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : Gun metal

DSR (WET) 16.1 Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : Gun Metal

DSR (WET) 17.1 Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve and nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve and M.S. Pipe and socket. 30 m

DSR (WET) 20.0 Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required.

DSR (WET) 22.0 Providing and fixing of pressure switch in M.S. pipe line including connection etc. as required.

DSR (WET) 4207 FBC CI Body having two nos. gunmetal 63mm male instantanous inlet coupling confirming to IS:903 fitted with non return valve flange outlet of 100mm dia complete with 25mm size gunmetal drain valve, two nos. rubber blanck caps and chain. Four way gunmetal FBC connection

DSR (WET) 4216 Sprinkler operating at 680 centigrade standard response, standard coverage 15mm BPST, K56 UL listed and FM approved 68 degree centigrade Sidewall Sprinkler

Supply, Installation, Testing and commissioning of 1 Elevator(s) Load and Capacity 408 kg or 6 persons Speed 1 m/s Stops and Openings 4 stops and 4 openings, Single entrance car Travel height 12.6 m Elevator Grouping `Simplex Full Collective Control` Well Dimension 1650 mm width and 1530 mm depth (required) Head Room height 3700 mm (required) Pit Height 1500 mm (required) MAP Floor Position Topmost floor (TOP) Car dimensions 1100 mm wide x 1000 mm deep x 2200 mm high Door dimensions 700 mm wide x 2000 mm internal height Door type Two-panel centre opening Plain Panel Finishes Car design SS silver mirror Car Panel Finish Side walls: Stainless steel Hairline AISI441 Rear wall: Silver mirror polished stainless steel Front wall: Stainless Steel Handrail Round Bend Handrail Silver brushed stainless steel (ST4) at Rear Wall Ceiling and Lighting Integrated Roof RL20 Stainless Steel Ring Lighting LED Flooring PVC Flooring Car skirting material: Stainless steel Hairline AISI441` Car Door Finish Stainless steel Hairline AISI441 Floor number Floor Mark Interfloor distance Landing door material 1-4 -1,0, 1, 2, 3 2700 mm, 3300 mm, 3300 mm Stainless steel AISI441 Car operating panel 1 Full Height Stainless Steel Face Plate Silver brushed StSt Segmented LCD display Square surface mounted Buttons KDS90 Landing Signalization Stainless Steel 7 segment display Flush Mounted Silver brushed StSt Square,surface mounted KDS90 Standard: Correction drive to next level Emergency Alarm @ Main Floor Car Call backwards Overload function, constant indication/Buzzer Bypass load Function Auto Cut off Fan and Light Manual Rescue Operation Centralized Hoisting for lesser vibration and smooth travel Pit Ladder Micro movement Led Based Buttons L.W.D. (Load Weighing Device) Direction and Position Indicator In Car and Landing Advanced Car Position Indication Automatic Brake Test function every 11hours Every run brake supervision Phase reversal functioning Signal Fixtures plus 10% to –10% Voltage Fluctuation Withstanding Capacity Door Close Button Door Open Button Car Emergency Light Fireman Drive Curtain of Light 169 Beams Accurate Relevelling, Automatic, Closed Door E, With emerg. opening device` Emergency Rescue Device with audio announcer 2 Way Dedicated Intercom Nudging service Attendant Service Ring Lighting LED B, 2 Hours Fire rated 6 Passenger elevator with 4 stops without machine room as per specification. Warranty 12 months from date of handing over

Credit or recovery of full bricks recovered from dismantled material as per the satisfaction of Engineer In-charge.

Credit or recovery of steel recovered from dismantled material as per the satisfaction of Engineer In-charge.

Credit or recovery of wood recovered from dismantled material as per the satisfaction of Engineer In-charge.

Bidder Name

Amount

Sat Parkash Contractor (GSTN-NA) BID ID -1277068

pavee construction (GSTN-06CLIPK5684B1Z2) BID ID -1276036

M/s Brahma Construction (GSTN-NA) BID ID -1276243

The Shiv Shakti Cooperative L/C Society (GSTN-NA) BID ID -1277144

SKG INFRATECH PRIVATE LIMITED (GSTN-NA) BID ID -1276566

Sat Parkash Contractor (BID ID -1277068)

The Shiv Shakti Cooperative L/C Society (BID ID -1277144)

pavee construction (BID ID -1276036)

SKG INFRATECH PRIVATE LIMITED (BID ID -1276566)

The Shiv Shakti Cooperative L/C Society (BID ID -1277144)

Sat Parkash Contractor (BID ID -1277068)

pavee construction (BID ID -1276036)

SKG INFRATECH PRIVATE LIMITED (BID ID -1276566)