8772 SPECIAL REPAIR TO BLDG NO 4A AND 4B RF LINE UNDER GE S PUNE

Dismantling of single layer Mangalore pattern tiles or similar tiles in roofing etc complete all as specified and as directed.

Dismantling battens for tiles shingles etc of any size including tiling fillets exc 15 cm spacing etc complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting in roof covering complete all as specified and directed.

Dismantling fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section (unframed work) complete all as specified and directed.

M & L timber scantling , clean sawn,Second class hard-wood in scantlings complete all as specified and directed.

S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long & diameter of neck is 11 to 15 mm complete.

Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with creosote oil complete all as specified and directed.

S&F for rolled mild steel conforming to grade E-250 (Fe-410W, quality A) as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance plates, pieces, cleats etc including necessary welding complete all as specified and directed. (Note : (i) MS FI should be fixded at wooden rafters with nut and bolts for welding MS cleat to receive purlins etc ( nut bolts paid in separate item ) (ii) MS Cleat should be fixed in wooden memeber with using tapping screws as site requirement, no extra rate given to contractor for same .)

Preparation of new steel surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over and including red oxide primer complete all as directed.

S & F roof sheeting prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick, 150GSM of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws or J hooks complete all as specified and directed.

S & F roof sheeting prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick , 150GSM of any colour having tensile strength of 550 Mpa as in roof covering / ridgesl, fixed with self tapping screws or J hooks complete all as specified and directed.

Providing, cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

M & L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified & directed.

M&L for 15 mm thick rendering on fair faces of brick work, block masonry or concrete surfaces in CM 1:6 to be finished even and smooth (without using extra cement) complete all as specifed and as directed.

S & F 12 mm thk PVC designer sheet as in eaves board fixed with screws to existing rafters etc complete all as directed by Engr-in-Charge.

Taking down cement plaster on brick, stone walls and concrete surfaces of any description/ positions etc including racking out joints, hacking for keys scrubbing down with water etc and M & L for providing and laying plastering of surface using fibre reinforced polymer modified repair mortar. The product shall be single component thixotropic fiber reinforced polymer modified repair mortar needing only addition of water at site which can be applied by trowel. It is reinforced with specially designed bean shaped, alkali resistant synthetic fibers for exceptional resistance to crancking. It is recommonded for repair situations requiring application of mortar up to 10-20 mm thickness in one layer. The product shall achieve a compressive strength of 11 MPa in 1 day& 30 MPa in 28 days and a minimum flexural strength of 6 MPa @ 7 days. It shall have a tensile patch up. Make : Thermax Ltd / M/s SNI Infratech Pvt Ltd/ M/s Tiki Tar Danosa (India) / M/s Carlisle Syntec Middle East

M & L for applying two coats of waterproofing and protective coating of walls , floors and ceiling etc of make : Thermax Ltd / M/s SNI Infratech Pvt Ltd/ M/s Tiki Tar Danosa (India) / M/s Carlisle Syntec Middle East, with mucis properties - High performance elastomeric cementatious Non - toxic waterproofing coating complies to ASTM D4541, ASTM C836, DIN1048 p.5 ASTM D412 having shore hardness D-Scale-20 Non volatile, Low Temperature feasibility test, tensile strength > 0.4 MPa, Elongation > 20 %, this membrane shall have a minimum pot life of 40 mins and shall be applied in 2 coats to a total of 1 mm dft. It shall be capable of resisting 330 KPa positive pressure and 160 KPa negative pressure and also have crack bridging up to 1 mm . It shall have adhesive bond strength of minimum 1 MPa. The coating shall also have corrosion resistance properties to protect steel if it comes in complete all as specified and directed.

M&L for prepration of newly plastered wall surface and applying two coat of oil bound distemper over 3 mm thick wall care putty complete all as specified and as directed.

Complete removal of existing treatment and M&L for applying 3 mm thick wall care putty and applying two coats of distemper oil emulsion on walls all as spd and directed.

M&L for prepration of old or new plastered wall surface and Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

Demolition of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets (false ceiling of any thickness) complete all as specified and directed.

M&L for Gypsum ceiling board for ceiling prepainted, 595 x 595 x 8 to 9 mm thick in size, of approved brand/make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32 x 24 mm for main, 25x24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2 mm thick G.I. Suspension wires spaced at 1200 mm on main runners including making niches for fans/light including dismantling of existing false ceiling with grid complete all as specified and directed.

Taking down Chowkhats or frames not exc. 1.5 sq. m each (without taking off shutters from the frames) and making good the distrubed surface by cement concrete 1:2:4 type B-0 using 12.5 mm aggregate complete all as specified and directed.

Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each (without taking off shutters from the frames) and making good the distrubed surface by cement concrete 1:2:4 type B-0 using 12.5 mm aggregate complete all as specified and directed.

S & F pressed steel frames of size 105mm X 60 mm for doors with one or more rebates including necessary lugs, hinges, lock strikes plate, incl M & L for providing PCC type B-0 ,1:2:4(using 12.5 mm graded stone aggregate) to fill up the hollow portion of the frame complete all as specified and directed.

S & F pressed steel frames of size 125mm X 60mm for doors with one or more rebates including necessary lugs, hinges, lock strikes plate, incl M & L for providing PCC type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) to fill up the hollow portion of the frame complete all as specified and directed.

S&F 35 mm thick factory made 2nd class hardwood gauged and skelton shutters open rebated and prepared to receive glass / gauze etc ( without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc size of members of shutters as specified in SSR part-I Section 8 cluse 8.24(a) and Fitted to chowkats complete all as specified and as directed.

S&F 35 mm thick factory made 2nd class hardwood plain framed panelled shutters/ any number member of panels) with panels of timber flat on both sides of wood particle board with commercial face veeners. The size of rail and stile as per IS : 1003 (Part I ) kiln seasoned and chemically pressure treated all as specified and as directed.

M&L for preparing new surfaces of wood of any description no otherwise described over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed.

Supply and fix 100mm size of butt hinges, medium weight cold rolled mild steel complete all as specified and as directed.

Supply & fix aluminium anodised sliding door bolts 300 mm size with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified.

Supply and fix 150mm size extruded aluminium alloy tower bolt fabricated type anodised complete all as specified.

Supply and fix 150mm size extruded aluminium alloy handles fabricated type anodised complete all as specified.

S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with stainless steel wire staples to steel or wooden windows/door/shutters/frames etc. complete all as specified and as directed.

S&F three track sliding window with two or more shutter with 4mm thick tinted glass and one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engr-in-Charge. (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352.

S & F ventilators/louvers using 4mm thick x 10cm wide frosted glass strips and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc all as directed (a) SP : 20048 (b) Glazing clips : 19352

M&L for MS framed work conforming to grade E-165 (Fe-290) or Fe-310-O of MS angle or other sections, such as grills, gratings with ends of bar shouldered and / or riveted or forged into spikes; framed guard bars; railings and like incl dismantling old existing grill/ grating wk or wrought iron work of any desc and any position, gates etc completed all as directed by Engineer-in-charge.

Taking down carefully the existing unserviceable batten/conduit/concealed type aluminium point wiring for light, fan, socket 5 Amps and15 Amps complete removing the same including fittings/fixtures and making good the disturbed surfaces of walls, floors, ceiling etc.complete all as specified and directed.

Taking down unserviceable main switch/DB, Teak wood boards etc complete all as directed.

Taking down submain wiring of any size complete all as directed.

M&L for point wiring surface type with PVC insulated, unsheathed, single core multistandard copper conductor cable( FRLS) of size 1.5 Sqmm, 1100 volts grade including 1.5 Sqmm PVC insulated, unsheathed, copper conductor cable for earth continuity wire to be drawn through in and including PVC casinmg and capping, ISI marked with its acessories including necessary modular metal flush box and modular white cover plate and SS screws with cup washers for fixing switches, sockets, fan regulators etc. including making good disturbed surfaces in cement mortar 1:3 for one light /CB point controlled by one switch, complete all as specified and as directed.

All as per item No 42 above but for one ceiling fan point controlled by one switch.

All as per item No 42 above but for one exhaust fan/wall mounting fan point controlled by one switch.

All as per item No 42 above but for one light point controlled by two 2-way switches.

All as per item No 42 above but for one 3/2 Pin 5 Amp socket out let point on the independent board.

All as per item No 42 above but for one socket outlet 3/2 pin, 5 Amp, point on the same board with other switches.

All as per item no 42 here-in-before but with cable 2.5 sqmm including 2.5 sqmm cable as earth wire for 15/16 amp socket point.

All as per item no 42 here-in-before but with cable 4 sqmm including 4 sqmm cable as earth wire for 15/16 amp socket point.

Supply and fix single pole and neutral enclosures with a two pin and earth plug and socket complete with one double pole MCB 10 A ,240 V complete all as specified and as directed.

S&F Modular switch 1 way 6A, 1 module complete all as specified and directed.

S&F Modular switch 2 way 6A, 1 module complete all as specified and directed.

S&F Modular switch 1 way 16A, 1 module complete all as specified and directed.

S&F Socket, 6A - 2/3 pin combined 2 module, complete all as specified and directed.

S&F Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed.

S&F modular type fan regulator 120 Watts , 2 module , complete all as specified and directed.

S&F modular type bell push switch , 1 module , complete all as specified and directed.

S & F modular white cover plate with frame, 2 module complete all as specified and as directed.

All as per item No 58 above but 3 module

All as per item No 58 above but 6 module

All as per item No 58 above but 8 module

S&F ceiling rose surface bakelite 65x50 mm two to three terminals complete all as specified and directed.

S&F call bell AC, 230 volts single pole complete all as specified and directed.

S&F MCB single pole, 240 volts 6 to 32 Amps, 'C' curve complete all as specified and directed.

S&F MCB single pole and neutral 06 to 32 Amps, 240 Volts, 'C' curve complete all as specified and directed.

S & F MCB TPN 40 to 63 Amps, 415 Volts 'C' curve complete all as specified and directed.

S&F sheet metal enclosure, (for DB's when MCBs to be used), flushed in wall single pole and neutral Double door, 8 way, 240 Volts with PVC MCB blanking plates, stove enamelled, dust and vermin proof suitable for incorporation of MCB's and isolators etc complete all as specified and as directed.

Supply and fixing load line distribution board TPN vertical, 4 way double door type, fixed on wall semi flush with incoming MCCB 4 poles 125 Amps, 10 KA, busbars , neutral link, blanking plates with IP 43 protection and door earthing complete with all accessories all as specified and as directed by Engineer-in-Charge.Make : Indoasian Cat No 811888 or equivalent in C&S/ Havells//Legrand/ABB/Schneider Note: Outgoing MCBs shall be measured and paid separately.

Supplying and fixing of ceiling fan , five star rating, (BLDC) white/ivory 1200 mm sweep, 3 wings suitable for operating on AC 220/230 volts single phase, 50hz supply with down road complete, including necessary PVC insulated flexible wire 3 core for connecting from ceiling rose to connector etc complete all as specified and as directed

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250 mm complete including connecting with 3 core flexible copper conductor including taking down the existing exhaust fan and depositing the same in MES store complete all as specified and as directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete including connecting with 3 core flexible copper conductor including taking down the existing exhaust fan and depositing the same in MES store complete all as specified and as directed.

M&L submain wiring surface type with two runs of single core, PVC insulated, unsheathed multi standard copper conductor cable of size 6 Sqmm, 1100 volts grade (FRLS) and one run o f 6 Sqmm PVC insulated multi stranded copper conductor for earth continuity conductor drawn through and including suitable size ISI marked PVC casing and capping with all necessary accessories complete all as specified and as directed. (Note :- Two runs of 6 Sqmm cable, one run of 6 Sqmm continuity earth wire and one run of PVC casing & capping with all necessary accessories will be measured as one RM).

M&L submain wiring surface type with two runs of single core, PVC insulated, unsheathed multi standard copper conductor cable of size 4 Sqmm, 1100 volts grade (FRLS) and one run o f 4 Sqmm PVC insulated multi stranded copper conductor for earth continuity conductor drawn through and including suitable size ISI marked PVC casing and capping with all necessary accessories complete all as specified and as directed. (Note :- Two runs of 4 Sqmm cable, one run of 4 Sqmm continuity earth wire and one run of PVC casing & capping with all necessary accessories will be measured as one RM).

Supply and Fixing storage type electric water heater of 25 Ltrs capacity, 240 volts, rated input 2 KW, PUF insulated fitted with stainless inner container and cooper coil of BEE rating 5 star models, max working head of water 60 Mtrs, fixed to wall with suitable MS tower/anchor bolts,Inlet/outlet pipe, grouted to wall and removing the existing unserviceable geyser and depositing the same to MES store yard complete all as specified and as directed.

S&F PVC metal braided connection pipes for hot water supply with brass adopters 15 mm dia and 600 mm long. complete all as specified and as directed.

S & F recess mounted low glare LED panellight 2'X2' size 36 watt white/warm white for armstrong/grid ceiling or similar ceiling mounting system complete prewired using 1.5 Sqmm FRLS PVC insulated (Unsheathed) 3 core copper conductor cable, 1100V grade including taking down old complete all as specified and directed. Make: Bajaj cat No GLADDEN 2x2 36W NW PD or equivalent in Halonix/Wipro/Crompton/Havells

S & F LED batten suitble for indoor application 20 W, 4' length , wall mounted with polycarbonate housing, end cap made of ABS plastic of white colour finish and high efficiency translucence (HET) diffuser and integral electronic driver including two point surface mounting on wall/ ceiling and connecting up with twin core twisted flexible copper conductor cable of suitable size including taking down old complete all as specified and as directed by Engr-in-Charge. Make : Make : Bajaj Cat No DAWN PC 20W NW PD or equivalent in Havells/Wipro/Crompton/Halonix/Luker

S & F LED batten suitble for indoor application 10 W, 2' length , wall mounted with polycarbonate housing, end cap made of ABS plastic of white colour finish and high efficiency translucence (HET) diffuser and integral electronic driver including two point surface mounting on wall/ ceiling and connecting up with twin core twisted flexible copper conductor cable of suitable size including taking down old complete all as specified and as directed by Engr-in-Charge. Make : Bajaj Cat No DAWN PC 10W NW PD or equivalent in Havells/Wipro/Crompton/Halonix/Luker

S&F LED 35 Watt street light fitting IP-66 for bldg secutiry complete with light grade GI brackets, Nuts, bolts, clamps complete with all accessories internaly pre wired and including connecting up with twin core twisted flexible copper conductor cable complete all as specified and as directed

S & F LED bulk head light fitting 10W energy efficient wall mounted made of engineering plastic with opal diffuse IP-65 complete with all aceessories including connecting up with twin core twisted flexible copper conductor cable complete all as specified and as directed by Engr-in Charge. Make : Bajaj Cat No BIPB 10 W CW LED PD (PC) or equivalent in Havells/Bajaj/ Wipro/ Crompton/ Halonix

Supply and fix decorative, wall mounting, LED light fitting 7 W with brushed nickel finish fixture and opal glass diffuser including connecting with copper cable complete all as specified and as directed.Make : Luker, Maira GSS1 Cat No LWL112-1 or equivalent in Havells/Bajaj/ Wipro/ Crompton/Halonix

M & L for inverter point wiring for light, ceiling fan and 5 Amp socket with 2.5 sqmm,PVC insulated, unsheathed, single core multistandard copper conductor cable( FRLS), 1100 volts grade including 1.5 Sqmm PVC insulated, unsheathed, copper conductor cable for earth continuity wire to be drawn through in and including PVC conduit medium grade ISI marked with its acessories upto the main DB and 15 A switch socket combination with gang box flushed in wall for inverter power supply complete all as specified and as directed.

M & L earthing complete with GI earth plate Electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth plate not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanished earth wire 4.0 mm dia by means of bolts, nuts check and washers of GI or steel all as shown in electrical plate No. 3 of SSR Pt -I connected to earthing test point all as specified or indicated including GI pipe 15 mm dia light grade for earth wire protection, necessary excavation, earth work in any type of soil, PCC chamber and RCC cover slab, connecting lead wire from test point to DB complete all as specified & as directed

Supply & Fix GI pipe light grade 50 mm for cable protection fixed to poles/bldg incl two Nos MS clamps made to shape out of 25 x 3mm MS flat and painting incl bolt, nut, washer etc.complete all as specified and as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25.0 sq mm 3.5 core complete all as specified and as directed.

M&L for laying double wall corrugated HDPE pipe, UV stabilized of size 90X75 mm (ODX ID), IS-16205 for cable protection laid in trenches or fixed to walls complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of cables etc. and getting out in hard & dense soil complete all as specified and as directed

Returning, filling in soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed.

Removal of excavated material [soil] to a distance not Exc 50m and depositing where directed at a level not exc 1.5m above the starting point where directed complete all as specified and as directed.

Supply and lay in repair LT service cable 6 sqmm 2 core inside PVC conduit 20 mm dia medium grade for landscape lighting/ garden lighting inside trench or on wall/floor complete all as specified and as directed.Note: The rate quoted must be inclusive of laying the cables in trench at max 10 cm depth or mounting on floor/wall

Supply and fix LED bollard light 09 W, 240 V 50 Hz, CCT 5700 K, integrated electronic driver with internal wiring of copper cable and terminal block for connecting to incoming cable, open & short circuit protection, surge protection, body made of metallic pipe structure and aluminium base of 1.0 mtr length , glare free opal PC diffuser,360 degree lighting, IP 65 protection, resistance to corrosion including bolts for fixing and PCC (1:3:6 ) for foundation complete all as directed. (Make :- Bajaj Cat No: BL TORCIA 9W WW 700HPD or equivalent in Wipro/Havells/Crompton/Halonix)

Supply and fix in repair LED post top lantern of 45 W, IP 65 protection with in built electronic driver and aluminium housing in pure polyster UV resistant powder coated black finish, top maintainable product with top opening die cast cover , anti corrossive stainless steel screws & silicon gasket, HET PMMA diffuser conforming to IS 10322 Part 5/Sec 1: 1987, suitable for pole diameter up to 75 mm , cable entry through pole from bottom, 3 way 10 Amps GFP mains connector duly wired upto terminal block complete all as specified and as directed. Make Bajaj Cat part No: BL ARIAN P Nx40 W WW PD or equivalent in Wipro, Crompton, Havells, halonix.

Supply and fix three way,(one incoming and two outgoing), three terminal connector suitable for copper cable of size 2.5 sqmm made of bakelite and necessary screws for connecting the cable complete all as specified and as directed.

Supply and fix junction boxes made of plastic round/square shape with four terminals concealed in wall/steps for housing three way connector along with cover plate complete all as specified and a directed.